Canon EOSC300DAF (EOS C300DAF, EOS-C300DAF, EOS/C300DAF, eosc300daf) EOS C300 EF with DAF
Canon Cinema EOS C300 EF super 35mm digital cinematography camcorder with EF lens mount and DAF - Dual Pixel CMOS Autofocus
- Super 35mm CMOS Sensor
- Built-in Dual Pixel CMOS autofocus technology (for EOS C300 DAF only)
- Full HD MPEG-2 4:2:2 Color Sampling
- DIGIC DV III Digital Image Processor
- "Canon Log Gamma" to enlarge the dynamic range by 800%
- 24.00p recording mode to complement the prevalent film format
- Dual CF Card Slots support multiple recording modes
- Compact size with enhanced mobility
- Ultra-Large multi-angle 4-inch 1,230,000-dot High Resolution LCD Panel
- Diverse Industry-Standard Input/Output format
- Compatible with Brand new Canon EF Cinema Zoom Lenses
- Industry-standard MXF format to facilitate post-production efficiency
EOS C300 DAF* and EOS C300 PL# are the two brand new interchangeable-lens digital video camcorders after Canon usher in a new era of professional digital video recording by introducing the Cinema EOS system. The EOS C300 DAF comes with an EF mount that supports all EF lenses of Canon’s EOS DSLR cameras, while the EOS C300 PL features a PL mount that is compatible with standard PL lenses. Designed with ultra-compact bodies, EOS C300 DAF and EOS C300 PL incorporates Canon’s newly developed Super 35mm 8.29-megapixel CMOS sensor, DIGIC DV III Image Processor, MPEG-2 4:2:2 color sampling and a 50Mbps recording bit rate, offering accurate color reproduction and unrivalled imaging quality. The new camcorders offer a unique combination of exceptional imaging performance, lens compatibility and mobility, facilitating filmmakers with the highest levels of support.
* EF mount version compatible with Full series of EF lenses and new EF Cinema (EF mount) series lenses
# PL mount version compatible with industry-standard PL lenses and new EF Cinema (PL mount) series lenses
Super 35mm CMOS Sensor with higher light sensitivity and resolution
EOS C300 DAF and EOS C300 PL incorporate a newly developed Super 35mm CMOS Sensor with an active image size of 24.6 x 13.8mm. It delivers 8.29-megapixel (3840 x 2160) resolution to process 3 primary colors separately; and since each primary color possesses 2-megapixal clarity without the need of “Color Interpolation”, this can effectively reduce moiré artifacts and jaggies, offering smooth images with 1000 lines of resolution. Thanks to the Super 35mm CMOS Sensor, each pixel is an enlarged 6.4 x 6.4 micrometers in area and the distance from the microlenses to the photodiodes has been reduced, enhancing light-gathering capability that can produce better low-noise night video with crisp and detailed images. Also, it can achieve attractive shallow depth of view. The new sensor features 2x shutter scanning speed that can effectively reduce rolling shutter skews when shooting fast-moving subjects to produce perfect images.
Super 35mm CMOS produces perfect images
Full HD MPEG-2 4:2:2 Color Sampling
EOS C300 DAF and EOS C300 PL adopt the industry-standard MPEG-2 Long GOP 4:2:2 Codec (Canon XF Codec), unleashing the power of Super 35mm CMOS sensor and HD video lens. Supporting a maximum recording bit rate of 50Mbps, EOS C300 DAF and EOS C300 PL deliver professional film-standard quality in a compact size. Also, 4:2:2 color sampling offers twice the volume of color data, doubling the level of color resolution, minimizing jagged edges to ensure ample quality for chroma key composition and color corrections.
MPEG-2 4:2:2 color sampling provides a superior color resolution
DIGIC DV III Digital Image Processor for high-speed HD image data processing
Leveraging on Canon’s advanced digital imaging technology, the EOS C300 DAF and EOS C300 PL are equipped with proprietary DIGIC DV III digital image processor made especially for Canon’s HD digital camcorders. The processor handles massive HD video data with enhanced algorithm speed and efficiency, ensuring sharp and true-to-life HD videos in rich colors. DIGIC DV III is low in power consumption, enabling the camcorders to capture longer videos.
“Canon Log Gamma” to enlarge the dynamic range by 800%
The new “Canon Log Gamma” is designed to facilitate post-production by enabling users to enjoy greater freedom in fine-tuning images. By managing the image quality with excellent tonal reproduction of both highlights and shadows, Canon Log can increase a total dynamic range by 800%. Canon Log Gamma also allows for seamless conversion to the industry-standard 10-bit Cineon format for colour grading. Both camcorders provide view assistance function which can display a normal gamma setting image on LCD monitor as reference.
Dynamic Range increases 800% under Canon Log Gamma
24.00p recording mode to complement the prevalent film format
The EOS C300 DAF’s and EOS C300 PL’s 24.00p mode matches the exact frame rates of 35mm film cameras, saving the time needed for frame-rate conversion. Whether the two new models are used for shooting solely, or as a complementary tool for other film cameras, they can perform with the industry standard flawlessly.
Dual CF Card Slots support multiple recording modes
The EOS C300 DAF and EOS C300 PL use the popular CF cards as recording media. Both camcorders feature built-in dual CF card slots where two cards can be recorded simultaneously and support Relay Recording function, which will automatically switch to the other CF card for continuous recording when one card is full. This flexibility expands the recording capacity. Two 32GB CF cards can record 2.5 hours of full HD video in 4:2:2 codec at a maximum of 50Mbps recording bit rate. The dual CF card slots also support Hot Swappable function, making it possible to take out the CF card not in use while recording for uninterrupted shooting.
Compact size with a multi-angle control panel
The EOS C300 DAF and EOS C300 PL are ergonomically designed for enhanced mobility. With body-only dimensions 133mm x 171mm x 179mm and a weight of 1430g, the new camcorders can accommodate different situations with separate unites like handgrip and viewfinder. The removable, rotating handgrip can turn 360 degrees in 15 degree increments, this can assist users to access the Start/Stop buttons, aperture and other functions effortlessly. The operating buttons layout has also been redesigned with four sets of Start/Stop buttons in four different locations, 15 assigned buttons and two dials to suit individual shooting styles, allowing a greater level of control. Both models feature a built-in cooling fan and a heat-dissipating system to make long shooting possible; plus a highly durable dust- and drip-proof construction designed for use at harsh environment.
Ultra-Large 4-inch 1,230,000-dot High Resolution LCD Panel for accurate framing
The EOS C300 DAF and EOS C300 PL feature an ultra-large 4-inch 1,230,000-dot high resolution LCD Panel which rotates 270 degrees vertically and horizontally for different shooting angles. A range of user assist functions can be displayed on the LCD panel, such as the waveform monitor function provides an objective analysis for users on image brightness and brightness of red, green and blue primary colors for accurate exposure adjustment. The built-in vectorscope function helps check the balance between image hue and saturation for white balance adjustment. Together with the edge monitor function, the status of focus can be indicated in green and red waveform on the bottom of the LCD panel, allowing users to quickly adjust the focus point. Plus, a 0.52-inch, 1.55 Megapixel color electronic viewfinder that can tilt up to 60 degrees, best suited for shooting in narrow spaces.
Wireless connectivity with Industry-Standard Input/Output format
In achieving a whole new level of mobility, EOS C300 DAF and EOS C300 PL can offer wireless connectivity. With the aid of the WFT-E6D wireless file transmitter through an 802.11b/g/n network, camera settings like start/stop buttons, focus, white balance, gain and other parameters can be controlled remotely through computers, smartphones and tablets.
EOS C300 DAF and EOS C300 PL are built with HD-SDI output terminal that can output uncompressed full HD 4:2:2 1920 x 1080 native signals for post-production. Genlock allows multi-camera shooting; a SMPTE Time Code input/output facility is included for streamlined output compatibility with post-production workflow.
Supplied in the Box
EOS C300 DAF or EOS C300 PL Body
BP-955 Battery Pack
CG-940 Battery Charger
CA-940 Compact Power Adapter
TB-1 Tripod Base
DC-940 DC Cable
SS-1200 Shoulder Strap
EOS C300 DAF
EOS C300 PL
Video compression: MPEG-2 Long GOP;
Audio compression: Linear PCM, 16 bits, 48 kHz, 2 channels
File type: MXF
Image compression: JPEG
DCF (Design rule for Camera File system), compatible with Exif Ver. 2.3
Video Configuration (recording/playback)
50 Mbps (CBR, 4:2:2, 422P@HL)
1920x1080: 59.94i, 50.00i, 29.97P, 25.00P, 24.00P, 23.98P
1280x720: 59.94P, 50.00P, 29.97P, 25.00P, 24.00P, 24.98P
35 Mbps (VBR, 4:2:0, MP@HL)
1920x1080: 59.94i, 50.00i, 29.97P, 25.00P, 23.98P
1280x720: 59.94P, 50.00P, 29.97P, 25.00P, 23.98P
25 Mbps (CBR, 4:2:0, MP@H14)
1440x1080: 59.94i, 50.00i, 29.97P, 25.00P, 23.98P
Compact Flash (CF) Card Type I (two slots)
SD or SDHC (SD High Capacity) memory card
Maximum Recording Time*2
16GB CF memory card
50Mbps: Approx. 40 min.
35Mbps: Approx. 55 min.
25Mbps: Approx. 80 min.
64GB CF memory card
50Mbps: Approx. 160 min.
35Mbps: Approx. 225 min.
25Mbps: Approx. 310 min.
Super-35mm-equivalent CMOS sensor,
approx. 8,290,000 pixels (3840 x 2160)
1.3 cm (0.52 in.), approx. 1,555,000 dots, 100% coverage
Modular unit can be rotated 270° in its axis; includes the LCD panel, recording and playback controls, XLR terminals and related audio controls.
Articulated panel, 270° vertical rotation, 180° lateral rotation
10.1 cm (4.0 in.), wide, color, approx. 1,230,000 dots,
Two XLR Terminals
MIC setting: -60 dBu / 600 Ω
LINE setting: 4 dBu/ 10k Ω
Microphone attenator: 20 dB
Canon EF mount compatible with Canon EF lenses (including EF-S lenses)
PL Lens mount without data interface terminals
Lens multification factor: Approx. 1.53
(for 35mm equivalent focal length)
Built-in (Off, 2, 4 or 6 stops), motor operated
Custom white balance (two sets, A and B), color temperature setting (2,000K to 15,000K); two preset settings (daylight, 5,400K and incandescent lamp, 3,200K) that can be further fine-tuned
1/2-stop increments, 1/3-stop increments, fine-tuning
1-stop increments: ISO 320, ISO 400 to ISO 12800, ISO 20000
1/3-stop increments: ISO 320 to ISO 20000
-6dB to 30dB (3-dB increments),
0dB to 24dB (fine-tuning in 0.5-dB increments)
Speed (1/3-stop increments, 1/4-stop increments), angle, clear scan, slow, off
Lens Peripheral Illumination Correction
Available for Canon EF lenses*3
(ISO 640 (0 dB), 2000 lux, 89.9% reflection)
NTSC: F9 (1920x1080 at 59.94i)
PAL: F10 (1920x1080 at 50.00i)
(ISO 850, using Canon Log gamma)
54 dB (typical, 1920x1080, NTSC at 29.97P, PAL at 25.00P)
(24 dB, with a f/1.2 lens)
NTSC: 0.30 lux (29.97P, shutter speed 1/30)
PAL 0.25 lux (25.00P, shutter speed 1/25)
Size of Video Recordings
50Mbps, 35Mbps: 1920 x 1080 pixels, 1280 x 720 pixels
25Mbps: 1440 x 1080 pixels
Size of Photos
1920 x 1080 pixels, 1280 x 720 pixels
(only when capturing a photo from a clip)
HD/SD SDI Terminal
BNC jack, output only, 0.8 Vp-p/75 Ω, unbalanced
Video (1080i/720P), embedded audio, time code (VITC/LTC)
Video (480i or 576i), embedded audio, time code (VITC/LTC)
HDMI OUT Terminal
HDMI connector, output only
Sync OUT Terminal
BNC jack, output only, 1 Vp-p / 75 Ω
Output signal: HD component video luminance signal (HD-Y), HD analog tri-level signal, Analog blackburst signal, SD composite video
Ø 3.5 mm stereo mini-jack, -72 dBV (manual volume center, full scale -18dB) 600 Ω
Microphone attenuator: 20 dB
Ø 3.5 mm stereo mini-jack, -∞ to -12 dBV (16 Ω load, volume range Min to Max)
/ 50 Ω or less
BNC jack, Input only: 1 Vp-p/75 Ω
TIME CODE Terminal
BNC jack, input/ output
Input: 0.5 Vp-p to 18 Vp-p / 10 k Ω
Output: 1 Vp-p / 75 Ω
Ø 2.5 mm stereo mini jack
Grip Unit Connection Terminal
Proprietary connector for the supplied Grip Unit connection plug
Proprietary connector for the optional WFT-E6D Wireless File Transmitter
Power supply (rated)
7.4 V DC (battery pack), 8.4 V DC (DC IN)
LCD screen and view finder
11.7 W (NTSC, 24.00P recording),
11.4 W (PAL recordings)
10.7 W (NTSC, 24.00P recordings),
10.4 W (PAL recordings)
10.6 W (NTSC, 24.00P recordings),
10.2 W (PAL recordings)
Maximum rated power consumption: 20.9 W
0 – 40 °C
(W x H x D)
Minimal Configuration with thumb rest
133 x 179 x 171mm
133 x 179 x 177mm
Configuration with grip unit and grip bel
174 x 179 x 171mm
174 x 179 x 177mm
Configuration with monitor unit
185 x 249 x 187 mm
Configuration with handle unit and monitor unit
185 x 284 x 301 mm
Weight *5 (camcorder body only)
Camcorder unit only
Camcorde with grip unit and grip belt, monitor unit, BP-955 battery pack and two CF cards
Camcorder with grip unit and grip belt, monitor unit, handle unit, BP-955 battery pack and two CF cards
* All data is based on Canon's standard testing methods. Subject to change without notice.
*1 Custom picture files, camera settings and user memo files can be saved and loaded
*2 Approximate figures based on continuous recording
*3 Some Canon EF lenses are not compatible with peripheral illumination correction
*4 Recording at 50 Mbps with AF on, viewfinder/LCD screen normal brightness, SDI output on
*5 All dimensions and weights are approximate
Business Finance Options:
More and more businesses are adapting their strategies to focus on financial forecasting, credit control and effective working capital management. The trick is to invest in the business using finance options that encourage payment over time, offer demonstrable return on investment (ROI) and, most importantly, leave reserves intact.
1. Spread the cost over time
2. Tax efficiency
3. Create instant cash flow benefits
4. Demonstrate ROI from day one
5. Gain additional source of credit
6. Cover all acquisitions with one simple, regular payment
Capital Cost: £10,000
Rental: 1 + 35 Monthly Payments of £320.00
Subject to underwriting and terms and conditions
For further information please contact our sales team on +44 (0) 208 397 1407 or email us on email@example.com
Standard UK Mainland Delivery
We offer a standard mainland UK Delivery charge of £6.25 plus VAT on all orders (unless otherwise specified)
Items are estimated to arrive between 1-2 working days, subject to stock availability.
We also offer a Next Day Delivery £7.50 + vat and a Saturday Delivery option £25.00 + vat
Next day delivery - Option available if you order before 2.00pm
European Delivery Service
DigiBroadcast can ship any item within Europe. Delivery charges will apply and are dependent on the size, weight and destination of the products you have ordered, and the area zone it is allocated to.
All European deliveries are estimated to arrive between 1-3 working days, subject to stock availability, and prices are dependent on the European zone your country is allocated to.
Offshore & Overseas Delivery Service
DigiBroadcast can ship any item worldwide. Delivery charges will apply and are dependent on the size, weight and destination of the products you have ordered, and the area zone it is allocated to.
All International deliveries are estimated to arrive between 2-5 working days, subject to stock availability,and shipping prices are dependent on the International zone your country is allocated to.
You will be responsible for any customs or import duties levied once the goods reach your country.
IMPORTANT NOTES REGARDING VAT AND EU VAT
If you are an EU registered business, with a valid VAT number, then you do not have to pay VAT.
You can enter your VAT registration number on the check out page, after you have selected your payment method.
This web site is intended for professional users. Customers must satisfy themselves that a product is suitable before making a purchase. Items sold online are sold on a firm sale basis and are not returnable. Items sold as new that within one year of the date of sale exhibit problems which can be attributed to manufacturing faults will be repaired or replaced. The decision to repair or replace will be at the discretion of Digibroadcast Co Ltd.
As part of our policy, items must be returned as new within 7 working days of delivery and with all the original packaging intact and product tags attached.
Please notify us of your intention to return in writing at firstname.lastname@example.org within 7 days of receiving your delivery.
Returns Policy for USED products
Problems that can be attributed to fair wear and tear, misuse, exposure to contaminants including water or impact damage will be chargeable repairs.
"You" the customer within 7 days must notify us if you wish to return your purchased products to be able to asses, verify and fix any disputes with the purchase.
Customers wishing to return items to Digibroadcast Co Ltd. must contact us to obtain a returned material number (RMA) before shipping the item. When contacting us please say that you want to make a return and have your invoice number ready to quote.
Items returned to Digibroadcast Co Ltd without prior agreement will be returned to the customer. Digibroadcast Co Ltd accepts no liability for financial losses incurred by customers who have submitted unauthorised returns.
For some products the manufacturer offers the facility to register the product and obtain an enhanced warranty. Customers are strongly urged to register such products immediately. Digibroadcast co ltd regret that unregistered customers will not be able to benefit from the additional benefits.
Unwanted Product Returns within 14 days
"You" the customer within 7 days must notify us if you wish to return your purchased products. After 7 days, unwanted goods will only be accepted at Digibroadcast Co Ltd discretion and will be subject to a 25% restocking charge.
The unwanted product must be returned in its original and undamaged packaging with all the accessories. Returns must be made within a reasonable period - maximum of 28 days from the day you receive the product.
If the product is not returned in its original packaging, is damaged or has any accessories missing, we reserve the right to refuse a refund or charge for the missing accessories.
We will not refund the delivery charge and you will be liable for the delivery charge when returning the product. Follow our Return Procedure to return the product.
We accept PayPal, American Express, Visa, MasterCard, Maestro, Visa Electro, Delta, most Corporate cards and European cards.
If you wish to pay over the phone simply call us on +44(0) 208 397 1407
We also accept payment by Bank Transfer and Cash
Payments can also be made in person on collection
The prices stated on our website include any VAT. The amount you pay will be the price indicated on the product plus any delivery charges.
Click here for more information about PayPal Payments.
Credit & debit Cards Validation
All credit and debit cardholders are subject to validation checks and authorisation by the card issuer.
If the issuer of your payment card refuses to, or does not for any reason, authorise payment then you will be notified.
We may also use your information for the purposes of the prevention and detection of fraud. One of the purposes for which we may disclose your address and postcode details is to check against the IMRG Security Alert or any other Credit Reference Agency or Fraud Prevention Scheme.
At all times where we disclose your information it will remain secure.
We work with Sage Pay (formerly Protx), the largest independent payment service provider (PSP) in the UK and Ireland. Sage Pay provides a secure payment gateway (Level 1 PCI DSS), safely processing payments for thousands of online businesses, including ours.
Sage Pay uses a range of secure methods, including fraud screening, IP address blocking and 3D secure: once on the Sage Pay systems, all sensitive data is secured using internationally recognised 256-bit encryption standards. Sage Pay is PCI DSS (Payment Card Industry Data Security Standard) compliant to the highest level and maintains regular security audits, and is regularly audited by the banks and banking authorities to ensure that their systems are impenetrable. Sage Pay is an active member of the PCI Security Standards Council (PCI SSC) that defines card industry global regulation.
Your session is in a secure encrypted environment when you see https:// in the web address, and/or when you see the locked padlock symbol alongside the URL.