-
High quality, wideband, 9MHz component triax system
-
Operates on both AC and DC power
-
Compatible with the DXC-D30 and DXC-637 cameras
-
10-bit, high speed digital data control
-
Up to 1500m (4,921 ft.) transmission
-
Fully compatible intercom system
-
Control for pan and tilt units
-
Color teleprompter input with local DC power
-
Analog component transmission with 9mhz bandwidth for luminance (Y) signal and 4.5mhz for the color difference signals (R-Y/B-Y).
-
Maximum cable length is 1500m (4,921 ft). A teleprompter video channel can also be transmitted through the same cable.
-
Provides 2 component video outputs (RGB and Y/R-Y/B-Y), 2 composite outpus and a Y/C output. Also includes WF mode connector and WF monitor output along with a PIX picture monitor output.
-
Two Return Video inputs capable of accepting return video signals (VBS color) from two different systems. At the CA-TX7 camera adaptor, two channels of return video can be accepted.
-
Can be used with industry standard teleprompter systems. With reverse signal transmission from the CA-TX7 back to the CCU-TX7 using a teleprompter video channel in a triax cable, it is possible to transmit video signals other than those for the teleprompter from the CA to the CCU.
-
Works with major intercom systems including Clearcom, RTS, two-wire and four-wire. Accepts two channel input from an external intercom systems.
-
Can link multiple CCU-TX7 units for multiple camera control operation or connecting an external personal computer for remote control.
-
Controllable by using coaxial cable with power locally supplied to the camera instead of by the triax cable.
-
Equipped with rotary triax connector for easy cabling and 76-pin digital and Pro-50 pin analog interfaces.
-
Offers full camera control functions for the CCU-TX7 with scene files for camera setup and matching. Can also be used as a stand alone camera controller for the DXC-D30.
-
Basic camera control unit for the CCU-TX7 attaches to the front panel. Ideal for limited-space applications such as field production vehicles.
-
Power Requirements: AC 120V or DC 10.5 to 17.0V
-
Power Consumption: 95W
-
Operating Temperature: 5°C to 40°C (41°F to 104°F)
-
GEN LOCK: BNC type, loopthrough, VBS/BS, 1.0Vp-p, 75ohms
-
RETURN VIDEO (1,2):: BNC type, loopthrough, VBS, 1.0 Vp-p, 75ohms
-
PROMPT VIDEO (prompter):: BNC type, loopthrough, VBS, 1.0 Vp-p, 75ohms
-
VBS (1,2) (BNC):: BNC type, VBS, 1.0 Vp-p, 75ohms
-
*Y/R-Y/B-Y (1,2):: BNC type, Y: 1.0Vp-p, R-Y/B-Y: 700mVp-p, 75ohms
-
*R/G/B (1,2):: BNC type, 700mVp-p, 75ohms
-
*Y/C: BNC type, Y:1.0Vp-p, C:286mVp-p, 75ohms
-
SYNC:: BNC type, VBS, 0.3Vp-p, 75ohms, negative
-
PIX:: BNC type, 1.0Vp-p, 75ohms
-
WF (waveform monitor):: BNC type, 714mVp-p, 75ohms (Encoded output: 1.0Vp-p, 75ohms)
-
MIC OUT (1,2):: XLR 3-pin, 0dBu/-20dBu balanced, 2 channels
-
Camera:: Triax (Kings type) x 1
-
Coax:: BNC type x 1
-
REMOTE:: 10-pin
-
INTERCOM/TALLY:: D-sub 25-pin x 1, 4W/2WTALLY: 24V DC, TTL level or contact signals switchable
-
INTERCOM (Front):: XLR 5-pin x 1
-
PGM IN: XLR 3-pin x 1
-
RTS: XLR 3-pin x 1
-
RS-232C: D-sub 25-pin x 2
-
Storage Temperature: -20°C to 55°C (-4 °F to 131°F )
