| |
Sony DSR-1500AP - With 2 Yr Sony Silver Support.
Automatic DV format change
The DSR-1500AP automatically detects DV, DVCAM and DVCPRO tape formats.
Playback of three sizes of DV, DVCAM and DVCPRO cassettes
The DV formats include not only DVCAM and DV but also the DVCPRO format. Three cassette sizes utilised for these formats. All these tapes can be played back in the DSR-1500AP without any special mechanical adapter.
No need to dub up to other higher formats, which is often required on other DV VTRs
The editing functions such as digital slow motion, jog audio and DMC are all available for all DV tape formats. Superb jog audio lets you easily handle all the DV tape formats as direct editing sources. This means that, even when using DV or DVCPRO recorded tapes as editing sources, there is no need to dub to other, higher, formats.
i.LINK interface as standard
The DSR-1500AP is newly equipped with i.LINK interface as standard (optional on the DSR-1500P).
The i.LINK interface enables a single cable to simultaneously carry digital video and audio signals as well as data and control signals, with no quality deterioration. This simple connection offeRs an ideal for interconnecting the DSR-1500AP with i.LINK equipped non-linear editing systems and other computer-related products.
Consumer DV (SP) recording capability
Should you require a longer recording time than what is available with DVCAM format, the DSR-1500AP can also record in Consumer DV format (SP only). A standard-size DVCAM cassette can record for up to 276 minutes, while a mini-size cassette records for up to 60 minutes.
In addition, without any rewiring, an edited program can be recorded directly with DV format for distribution purposes.
Compact design
At only half-rack size (3U high), the DSR-1500AP fits easily into a variety of user environments. Often used as an editor or feeder machine in desktop nonlinear editing systems, it can also be installed in confined spaces such as OB vehicles.
The wide aspect ID (16:9) can be recorded or erased
Pictures recorded in a 16:9 aspect ratio include a wide aspect ID located in the VITC. The DSR-1500AP can record or erase this ID. For example, if you dont want this ID signal to appear on a TV display, this ID can be erased. If the video signal passes through an editing or effects system this ID signal is often removed. The DSR-1500AP can re-record it.
Minimised video degradation
Due to a newly developed filter colour blurring during baseband dubbing (e.g. SDI or analogue component) has been significantly reduced.
No Generator required to record a pre-striped tape
The DSR-1500AP incorporates an internal signal generator. This generates either colour bars (100% or 75%) or black /burst signals for video and a 1 kHz tone or silence for audio. This function is convenient for recording a pre-striped tape prior to editing.
Playback capability of DV(25 Mb/s) format recorded tapes
The DSR-1500AP has an excellent playback compatibility with all DV family formats (25 Mbps). This includes DVCPRO. Tapes of all these formats can be played back in the DSR-1500AP without any special mechanical adapter or menu selection.
Excellent Digital Slow Motion
The DSR-1500AP boasts excellent, noiseless, slow motion within the range of E.5 to +0.5 times normal playback speed, in increments of 1%. This range is effective for all DV formats (25Mbps) - DV, DVCAM and DVCPRO.
Excellent Digital Jog Sound
The DSR-1500AP offers excellently smooth and clear performance of jog sound within the range of E.5 to +0.5 times normal playback speed, just like an analogue VTR. This allows easier searching for editing points especially within interviews. This is available for all DV formats (25Mbps) - DV, DVCAM and DVCPRO.
DV (SP) Format Recording
The DSR-1500AP, with consumer DV recording capability (SP only), facilitates non-linear editing users to distribute the contents in consumer DV format. A standard-size DVCAM cassette, which in DVCAM mode records 184 minutes, can record for up to 276 minutes in DV mode. Similarly a mini-size DVCAM casette can record for up to 60 minutes (DV mode).
In addition, recording in Auto Function (dubbing via i.LINK or SDTI) enables an accurate copy of audio, video and time code.
Improvement of multi-generation dubbing quality
Due to a newly developed filter colour blurring during baseband dubbing (e.g. SDI or analogue component) has been significantly reduced.
16:9 Aspect Ratio
Pictures recorded in a 16:9 aspect ratio include a wide aspect ID located in the VITC. The DSR-1500AP can record or erase this ID. For example, if you dont want this ID signal to appear on a TV display, this ID can be erased. If the video signal passes through an editing or effects system this ID signal is often removed. The DSR-1500AP can re-record it.
Timecode
The DSR-1500AP supports not only LTC timecode conforming to the EBU format but also Vertical Interval Time Code (VITC) through all video signal interfaces. VITC enables video and timecode signals to be copied with just a single BNC cable via either the composite or SDI interfaces. It also allows users to record other timecode data in the auxiliary data area of the VITC which is especially helpful for off-line editing.
ClipLink
The DSR-1500AP supports the ClipLink function. Being integrated into a NLE system with Sony EditStations, the DSR-1500AP plays an active role by sending the ClipLink information data onto the EditStations to provide great efficiency through the whole editing process. Also, the DSR-1500AP has a capability of full tape dubbing with ClipLink Log Data either through i.LINK or a combination of SDTI (QSDI) + RS-422A.
Internal Signal Generator
The DSR-1500AP incorporates an internal signal generator. This generates either colour bars (100% or 75%) or black /burst signals for video and a 1 kHz tone or silence for audio. This function is convenient for recording a pre-striped tape prior to editing.
Reduction of mosaic noise in panning pictures
By improving the DCT motion detector, the DSR-1500AP offers improvements in the picture quality especially when viewing panning pictures.
Picture quality in Slow motion
Employing the same Y-Add filter as that been used in Digital Betacam or Betacam SX VTRs, the DSR-1500AP offers smooth digital slow motion picture by greatly reducing vertical jitter. This ability of the DSR-1500AP is particularly apparent in the range of less than 0.5 times normal speed.
Auto Repeat function
The DSR-1500AP has an Auto Repeat function that enables continuous playback between user defined IN and OUT points.
Power requirements: AC 100 V 240V, 50 60 Hz
Power consumption: 55 W (with all options)
Operation Temperature: 5 C 40 C
Storage temperature: -20C - +60 C
Operating relative humidity: Less than 80%
Storage relative humidity: Less than 90%
Mass: 6 kg
Dimensions: 210(w) x 130(h) x 400 (d) mm
Tape speed: 28.221 mm/s
Recording/Playback time
DVCAM: 184 minutes (Standard size), 40 minutes (Mini size)
DV: 276 minutes (Standard size), 60 minutes (Mini size)
FF/REW time
Standard size: Less than 3 minutes
Mini size: Less than 1 minutes
Search speed: Max - 85 times normal speed, forward and reverse via RS-422A
Video performance
Bandwidth
Luminance: 25 Hz to 5.0 MHz +1.0/-1.5 dB
Chrominance: 25 Hz to 2.0 MHz +1.0/-2.0 dB
S/N ratio: More than 55 dB
K-factor: Less than 2.0%
Y/C delay: Less than 30 ns
Audio performance
Frequency response
2CH mode (48kHz/16bit): 20 Hz to 20 kHz +/-1.0dB
4CH mode (32kHz/12bit): 20 Hz to 14.5kHz +/-1.0dB
Dynamic range: More than 87 dB
Distortion (THD + N): Less than 0.07%
Input/Output signals
REF. Video: Input (BNC x 2) - 0.3 Vp-p, 75 ohm, sync negative
Video
Input (BNC x 2, usnig DSBK-1504P) - Composite, 1.0 Vp-p, 75 ohm, sync negative
Output (BNC x 3)
Component
Input (BNC x 3, using DSBK-1504P) - Y: 1.0 Vp-p, 75 ohm, sync negative - R-Y: 0.7 Vp-p, 75 ohm (100%) - B-Y: 0.7 Vp-p, 75 ohm (100%)
Output (BNC x 3)
S-Video
Input (BNC x 2, using DSBK-1504P) - Y: 1.0 Vp-p, 75 ohm, sync negative - C: 0.3 Vp-p, 75 ohm (at burst level)
Output (BNC x 2)
SDI
Input (BNC x 1, using DSBK-1501)
Output (BNC x 2, using DSBK-1501)
Conforms to Serial Digital Interface (270 Mb/s), ITU-R BT.656
SDTI (QSDI)
Input (BNC x 1, using DSBK-1501)
Output (BNC x 2, using DSBK-1501)
Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
i.LINK
IEEE-1394, 6-pin x 1
Audio
Input (XLR 3-pin female x 2, using DSBK-1504P)
Output (XLR 3-pin male x 2)
-6/-3/0/+4 dBu
Monitor
Output (RCA x 1)
- to 9 dBu, 47 kohm, unbalanced (-18 dBFS)
Headphone
JM-60 headphone jack x 1
- to -11 dBu, 8 ohm, unbalanced (-18 dBFS)
AES/EBU
Input (BNC x 2, using DSBK-1501)
Output (BNC x 2, using DSBK-1501)
75 ohm, unbalanced
Time Code
Input (BNC x 1)
Output (BNC x 1)
EBU time code, 0.5 Vp-p to 18 Vp-p, 3k, unbalanced
EBU time code, 2.2 Vp-p, 75, unbalanced
RS-422A
9-pin D-sub connector x 1, female
Control S
Stereo mini jack x 1
AC Power Code x 1
Operating Instructions x 1
Digital Input/Output Board: DSBK-1501
Analogue Input Board: DSBK-1504P
9-pin remote control cable(Length:5m (16 ft), 10m (33 ft), 30m (98 ft)): RCC-5G/10G/30G
DV cable (6-pin/6-pin to 4-pin): CCF-3L/CCFD-3L
Remote Control Unit: DSRM-10
Digital Videocassette Standard size: PDVM-64ME/94ME/124ME/184ME
Mini size: PDVM-12ME/22ME/32ME/40ME
Cleaning cassette: DV12CL (standard size), DVM12CL (mini size)
|
