SONY CAMCORDERS DVW-709WSP

CAMCORDERS - SONY - DVW-709WSP

Description

Sony DVW-709WSP The DVW-709WSP is the cost effective widescreen Digital Cinematography tool. It incorporates 2/3-inch (620K) Power HAD IT CCDs with a 16:9/4:3 switchable aspect ratio.

Digital Cinematography style of shooting
This Digital Betacam camcorder will produce some of the finest and most accurate pictures even when used in the factory preset condition. To achieve a more cinematic or film-like look, special attention must be paid to both the camera settings and the appropriate accessories and lenses. The flexibilty of these camcorders together with cinematic style shooting and lighting will provide very satisfying results. High production security is achieved through immediacy & instant review of the material on location. Digital Cinematography has been widely accepted as an economical but high quality alternative for programme production.

Digital Cinematography Accessories
Accessories include special digital cinematography zoom and prime lenses, base plates, matte boxes and follow focus units. A range of special lenses optimised for Digital Cinematography style production are available from most manufacturers. There is also a range of prime lenses for 2/3-inch mount cameras.

General Camcorder
This camcorder is ideal for general TV shooting with the highest picture quality.

Advanced Digital Signal Processing
Auto trace white, Dial in colour temperature, Multi-matrix, Film gamma, Knee saturation, Soft focus, Adaptive detail and Skin tone detail

Wide range of options for Digital Cinematography applications
Picture cache, SDI output, Picture inversion, Extended viewfinder, Colour viewfinder, Cine lens adapter, Setup memory cards, Lithium ion (no memory effect) batteries and Arri accessories

Features

16:9 / 4:3 Switchable IT CCD
IT CCD has a smear level of -120 dB, which is ideal in almost every situation

12 bit Advanced Digital Signal Processing (ADSP)
Allows enhanced dynamic range, better tonal reproduction and the addition of many other software features

TruEye processing
The TruEye processing feature manages video signal data according to three factors- brightness, hue and saturation- so that with a wide dynamic range signal, colour can be reproduced as faithfully as by the human eye , by eliminating the hue factor distortion.

Optional SDI output board.
Allows the rear video out socket to be either analogue composite or SDI, selectable by a menu.

Optional Picture Cache memory board.
Now you need never miss a picture again, this board stores up to 8 seconds of audio and video in solid state memory. Thus an event up to 8 seconds previous to the time when you pressed the rec start button is available. It is selectable to be 1, 2, 4 or 8 seconds, for example a store of 4 seconds gives effectively an instant start from standby off position.

Internal 50 watt stabilised light system.
This stabilised internal light system can be powered from the camcorder�s lithium-ion battery. The light can be switched on/off either manually or automatically, where the light goes on when you start recording and off when you stop recording.

Turbo gain up to 48 dB.
Allows working down to 0.2 lux, better than the colour capability of the human eye.

Auto trace white system.
The ATW function makes it possible to automatically adjust the white balance as lighting conditions change. This function is useful when shooting in rapidly changing lighting conditions (for example, when moving from an indoor to an outdoor location). Conventional Auto white balance is also available both instead of and in addition to ATW operation. White B preset position is assigned for ATW operation by selecting either ATW or AWB B in the VF menu.

Dial in colour temperature.
You can now programme the camera to a certain colour temperature, and then light to that, rather than using preset positions or auto white balance with gels to offset the balance. Also added is an offset function to slightly warm or cool a picture irrespective of the auto white setting, since the offset is removed before auto white and then added back in again when auto white is completed.

Built in film gamma curve
The F gamma represents the average transfer characteristic of various film stocks, and has a shallow slope in the dark areas leading to slight lifting of the very dark areas, and flattens off the highlights, to give a higher dynamic range. Programmable S gamma is also available.

Multi matrix feature.
This allows any colour to be grabbed, and its hue and saturation to be altered within a range of around 20 degrees, and the saturation almost to nil. In this way many "in camera" effects can be made.

Cameraman programmable menu system.
This allows every cameraman to make his own menu structure, by copying any single menu item from any other page and pasting it into your own page, which can then be stored on a setup card.

Supplied Accessories

Operational Manual
Lens cap
Shoulder belt
Microphone
XLR cap x 4

Optional Accessories

Motorised filter wheel option

BKDW-701

SDI output board

BKDW-702

Cache memory board for loop record function

BKDW-703

Picture inversion board to allow use with Angenieux / Zeiss 35 mm cine lens adapter

BKDW-704

Viewfinder rotation bracket

BKW-401

Setup card

BSC-1

Wireless receiver to mount onto the back of the camcorder with a bracket

WRR-860A

Tripod adapter

VCT-14

Battery charger for 4 Li-ion batteries with much reduced charging time, and also with a 4 pin XLR output

BC-L120CE

Battery charger for 2 lithium ion batteries

BC-L50CE

Lithium ion battery 77.8 watt capacity

BP-L60A

Lithium ion battery 116.6 watt capacity

BP-L90A

Flight case

LC-777

Adapter to add SDI output and add audio channels 3 and 4 input. Therefore allows individual 4 channel audio recording

CA-701

Adapter to allow SDI output, external SDI or composite input signal recording on the tape and a 26 pin interface for simultaneous recording on a BVW-50 or DVW-250 portable recorder.

CA-702P

Adapter to allow a triax interface with a CCU-550AP or CCU-700AP with RCP control in a studio camera configuration

CA-755P

Remote control

RM-B150

38 watt mains v-shoe power supply to fit between camcorder and battery. If mains lead is removed, power is fed from the battery automatically. Can also charge a Li-ion battery to 80%.

AC-DN1

150 watt mains v-shoe power supply to fit between camcorder and battery. If mains lead is removed, power is fed from the battery automatically. Can also charge a Li-ion battery to 80%. Has extra 4 pin XLR output.

AC-DN2B

1.35" LCD colour viewfinder

BVF-VC10W