KATA CC-195 CAMERA BAG

GDC HDV Case

The CC- 195 is compact, TST padded case designed to hold a range of small digital camcorders. C-195 fits up to JVC GY-HD100U, Canon XL HD1 & similar. Or Sony HDV Z1 and FX1, PD170, Panasonic DVX100A etc with mounted mabox. Additional accessories will fit in the remaining space, the additional long compartment or the full length external pocket. Internal dividers are included and if needed a Modi-Vers Kit are available. The CC-195 lid is secured by a wide “hook & loop” fastener and a side release buckle. One pull allows for a quick full opening of the parallel zipper set. BSS Shoulder Strap is included as well as a padded Mesh-Grip handle. The CC-195 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF).

Manfrotto 501HDV, 546GBK Tripod Kit

The 501HDV, 546GBK tripod kit takes it's inspiration from Manfrotto's top professional systems and features a fixed counterbalance for a typical weight of camera and accessories of 2.5kg (5.5lb) with independent fluid cartridges in order to ensure smoother movements for both Tilt and Pan axis. The 501HDV, 546GBK also includes a tripod bag.

501HDV - The 501HDV creates smooth movement through the specially teflon coated discs. The fixed counterbalance spring inside the head creates smooth tilts and ensures equipment safety, even when tilt locks are left off. The counterbalance feature is easy to switch on and off to allow you the option for different filming setups.

The 501HDV retains all the benefits of its successful predecessor. The gradual friction system, separate pan and tilt locks, quick release plate and re positional pan bar.

546GB - The is a two-stage, extremely rigid, stable tripod. The 546GB has a die cast aluminum crown with a built in 75mm bowl. The tripod's telescopic ground-level spreader helps set leg angles accurately. Leg locks are secure and reliable, and spiked feet with rubber overshoes are provided for solid grounding on both uneven terrain and smooth floors.

SPECIFICATIONS:-

Closed length: 80.5
Load capacity: 6
Maximum height: 170.0
Minimum height: 44.0
Weight: 5.1

Varizoom VZ-Rock Controller

The VZ-Rock features a unique variable speed rocker control allows user to maintain the slowest crawl or gradually ramp up speed and then decrease speed gradually all in one smooth motion! Because your thumb never leaves the speed control you have quick response time and smooth actions to zoom in, zoom out, zoom faster or zoom slower. Simply push to the right to zoom in (telephoto) and push to left side to zoom out (wide). No shaking the camera or time lost fumbling to find the right button to zoom in or zoom out.

A low profile record button ("R") avoids accidental activation. And finally, the Wake up from standby button ("ON") Your camera manufacturer wisely created this safety feature to protect your camera. VariZoom controls respects this feature and utilizes it to the videographers greatest advantage. The purpose of this critical safety feature is to prevent damage to your cameras tape heads and the tape itself. When a camera is in pause mode the tape is still engaged with the spinning recording heads of the camera. Because the tape is not moving when in pause mode the heads will be spinning in place on the tape. The standby safety mode activates the tape transport to disengage the tape from the recording heads. This of course eliminates wear and tear on your camera and your tape.

Sennheiser EW112P- G3 Wireless Kit

General Description

Fast, flexible and professional: these characteristics make the ew 112-p G3 the perfect fit for every ambitious reporting team seeking both portability and great sound quality. The nearly invisible clip-on omni-directional microphone transmits its signal via a bodypack transmitter with mute function and a portable, battery-powered adaptive-diversity receiver. The receiver and transmitter are lightweight and easy to operate, yet rugged and packed with features.

Features

• Sturdy metal housing (transmitter and receiver)
• 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
• Enhanced frequency bank system with up to 12 compatible frequencies
• Adaptive-diversity reception for high reception quality
• Pilot tone squelch for eliminating RF interference when transmitter is turned off
• Automatic frequency scan feature searches for available frequencies
• Enhanced AF frequency range
• Increased range for audio sensitivity
• Wireless synchronization of transmitters via infrared interface
• User-friendly menu operation with more control options
• Illuminated graphic display (transmitter and receiver)
• Auto-Lock function avoids accidental changing of settings
• HDX compander for crystal-clear sound
• Transmitter and receiver feature battery indicatation in 4 steps
• Programmable Mute function
• Contacts for recharging BA 2015 accupack directly in the transmitter or receiver
• Wide range of accessories adapts the system to any requirement

Delivery Includes

• 1 EK 100 G3 diversity receiver
• 1 SK 100 G3 bodypack transmitter
• 1 ME 2 clip-on microphone (omni-directional)
• 1 CL 1 jack cable
• 1 CL 100 XLR cable
• 1 CA 2 camera adaptor
• 4 AA batteries
• Operating instructions

RODE NTG2 PACKAGE B :-

Package include:NTG2 Microphone, WS6 Deluxe Windshield, Rode PG2 Pistol Grip, shock mount and XLR 12" Cable

RODE NTG2

The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

RODE WS6 Deluxe Windshield

RØDE PG2 Pistol Grip Shock Mount

The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.

It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.

Cable management is an integral design feature of the PG2 pistol grip, with the cable running through the handle assembly to minimise any handling noise or clutter. Additional cable security is provided on either side of the rubber shock mount.

The PG2 can be operated by hand or attached to a boompole via the 3/8" thread attachment at the base. Compatible microphones :

NTG-1, NTG-2, NTG-3XLR 12" Cable