Sony J-H3 HD Cam VTR USED

HDCAM VTR Deck

DRUM HOURS 1513

COMES WITH 3 MONTHS WARRANTY

Sony J-H3 HD Cam VTR

Reduce the size and cost of HDCAM off line editing.

This machine is the first in a line-up to improve the flexibility, and seriously reduce the cost, of transferring your HDCAM rushes to your on line suite.

This is achieved by a unique combination of small size (same as J series) combined with every useful connection from downconverted SDI, analogue standard definition to i-Link.

A downconverter is included as standard, and it can handle both large and small HDCAM cassettes at 24PsF, 25PsF or 29.97PsF. 24PsF recorded tapes can also be played back at 25P with time code conversion

J-H3 Key Features:

Multiple interfaces - The J-H3 has an HDSDI output as well as analogue Y Pb Pr connectors. The built in downconverter supplies SDI and composite outputs, while the XGA computer output feeds a standard PC monitor. The downconverted signal is also provided as as i-Link (IEEE 1394) interface for a DV feed with audio, timecode and remote control of the J-H3 i.Link interface - (Requires optional HKJ-101 i.Link interface board). DV based off-line editing has become an industry norm. In order to bridge the gap between HDCAM tapes and DV, the J-H3 can be equipped with an i.Link connector by installing the HKJ-101 i.Link interface board.

DV video (525/625 depending on SDTV output), audio (2ch or 4ch), timecode, and machine control can be communicated between the J-H3 and a non-linear editor via a single IEEE1394 connection.

Note that machine control is effective for material capturing purposes only, and frame accurate editing is not supported. Tape-to-tape editing between an external VTR is not supported. Crash-recording via i.Link is possible.

Standard computer monitor interface - The J-H3 has an XGA computer output (regular mini 15 pin D-type), so you can display RGB pictures at 1024 x 577 pixels (that is, letterboxed from the native 1024 x 768) on virtually any computer screen or projector. Timecode and safe area markers can be superimposed.

System frequency - The J-H3 supports 24P, 25P (50i) and 29.97P (59.94i) frequencies. Original 24P tapes can also be played back at 25P with time code conversion and sound (pitch is 4% higher). Both the original 24P and the converted 25P timecode can be superimposed on the outputs. In addition there is a 23.98 PsF playback mode that has a 3:2 pulldown engine to provide 59.94i output (in 1080 and 525)

Off line editior connections - In addition to analogue and digital interfaces, the J-H3 also adds features necessary for frame accurate downloading. Included are a reference input (HD and SD), LTC time code output and an RS-422 connector for locking to an external recorder or non linear editor for straight playout applications.

J-H3 Benefits:

Compact and cost effective HDCAM tape playback - Despite the compact body design, both small and large HDCAM cassettes are handled in a most cost effective viewer and off line feeder with every interface needed.

Wireless remote - Simple FF/REW/PLAY/STOP/EJECT/SEARCH are supported. Search is ± 5 times.

Audio monitoring - This is conveniently by both XLR and RCA phono jacks, as well as a headphone jack. Either tracks 1 and 2, or 3 and 4 can be monitored. The HDSDI and SDI have embedded audio and VITC i-Link interface - Total plug and play functionality to any 1394 equipped PC.

SPECIFICATIONS:-

Power requirements  AC 100 V to 240 V 50/60 Hz 
Power consumption  60 W 
Operating temperature  +5 °C to +40 °C (+41 °F to +104 °F) 
Storage temperature  -20 °C to +60 °C (-4 °F to +140 °F) 
Humidity  25 % to 80 % (relative humidity) 
Mass  7.5 kg (16 lb 9 oz) 
Dimensions (W x H x D)  307 x 100 x 397 mm (12 1⁄8 x 4 x 15 3⁄4 inches) 
Tape speed HDCAM  96.7 mm/s (29.97 Hz), 80.7 mm/s (25 Hz) 96.7 mm/s (29.97 80.7 mm/s (25 Hz) 
77.4 mm/s (24 Hz) 
Playback time  124 min (29.97 Hz, with BCT-124HDL) 124 min (29.97 Hz, with BCT-124HDL) 
149 min (25 Hz, with BCT-124HDL) 149 min (25 Hz,with BCT-124HDL) 
 155 min (24 Hz, with BCT-124HDL) 
Fast forward / Rewind time  Approx. 6 min with BCT-124HD 
Search speed  Shuttle mode Still to ± 21 times normal speed playback 
Jog mode Still to ±1 time normal speed playback 
Servo lock time  1 sec or less (from standby on) 
Load/unload time  7 sec or less 
INPUT/OUTPUT 
Digital HD video BNC x 1, SMPTE-292M 
Digital SD Video BNC x 1, SMPTE-259M 
Analogue HD video BNC (x 3) Y: 0.7 vp-p, Pb/Pr: ±0.7vp-p 75 ? 
EIAJ RC-5237 connector, EIAJ CP-4120 standard 
Analogue SD video  BNC (x 1), Pin jack (x 1), 1.0 Vp-p, 75 ? 
Computer display  D-sub 15 pin, XGA (1024 x 768 dots), RGB, 0.7 V 
i.LINK (Optional)  IEEE1394 
Timecode BNC x 1, SMPTE 12M 
Audio monitoring Pin jack (x 2): -10 dBu at 47 k? load, unbalanced 
XLR (male x 2) +4 dBm, 600 ? load, low impedance, balanced 
Headphone  JM-60 stereo phone jack, -∞ to -12 dBu at 8 ? , unbalanced 
RS-232C  D-sub 9 pin male (x 1) 
RS-422 D-sub 9 pin female (x 1), 
Sony 9-pin remote interface 
Wireless remote  BIRCS 
EXT SYNC BNC x 2 
HD ANALOGUE RESPONSE 
Output level Y:  700 mV (±5 %) , Pb/Pr: 700 mV (±5 %) ,Sync signal: 300 mV (±5 %) 
Bandwidth Y:  0 to 20 MHz + 1.0 dB / -3.0 dB , Pb/Pr: 0 to 7 MHz +1.0 dB / -3.0 dB 
S/N ratio  56 dB or more 
Output impedance  Y, Pb, Pr: 75 ? (±5 %) 
Y/C Delay  Y, Pb, Pr: ±15 nsec or less 
XGA ANALOGUE RESPONSE 
Output level R:  700 mV (±5 %), G: 700 mV (±5 %), B: 700 mV (±5 %) 
Resolution  XGA 
Refresh/rate 50 Hz 
H-Frequency  48.4 kHz 
SD COMPOSITE RESPONSE 
Output level Y:  59.94i: 714 mV (±5 %), 50i: 700 mV (±5 %) 
Sync:  59.94i: 286 mV (±5 %), 50i: 300 mV (± 5%) 
Burst:  59.94i: 286 mV (±5 %), 50i: 300 mV (±5 %) 
Bandwidth  0.5 to 5.75 MHz + 0.5 dB/-3.0 dB 
S/N ratio  56 dB or more 
Y/C delay  20 nsec or less 
K Factor (2T Pulse)  1.0 % or less 
ANALOGUE AUDIO RESPONSE 
Output level XLR:  +4±0.5 dBm, -20 dBFS, 600 ? terminated 
PIN:  +10±0.5 dBu, -20 dBFS, 47 k? terminated 

CONTACT INFORMATION:

EMAIL: sales@digibroadcast.com

TEL: 0044(0) 208 339 6047