Browse here at DigiBroadcast for a wide range of studio cables at fantastic prices. Our audio cables are comprised of high-quality materials and designed especially for use within the broadcasting industry. Among our stock, you’ll find products from the industry’s leading brands, including Datavideo, Sennheiser and Sony to name just a few, all of whom are providers of the highest quality audio cabling. If you’re searching for related products, discover our selection of wireless transmission products plus sound spares and accessories.
Features: Extend and power your camera from up to 2 km using industry standard SMPTE fiber cables Includes common live camera controls with multiple channels of talkback and standard television industry talkback headset connections Features 1 Ultra HD camera feed, plus 3 HD return feeds in a compact IP video based design CONNECTIONS Optical Fiber...
Features: Work with remote cameras up to 2 km away from your studio or outside broadcast truck using SMPTE fiber onverts SDI video, audio, and remote camera control connections into a single optical fiber cable, which connects to a Blackmagic Camera Fiber Converter attached to a remote camera All video and data are transmitted using...
Connectors: 2 x opticalCON Cable Length: 820.2' (250 m) Compatibility: CA-FB70 optical fiber camera adapter HXCU-FB70 power supply extension unit HXC-D70K SD/HD studio camera with viewfinder and lens HXC-D70L SD/HD studio camera with viewfinder HXC-D70H SD/HD studio camera
FieldCast FCT-2CSMHB100 (FCT2CSMHB100, FCT 2CSMHB100, FCT/2CSMHB100, fct-2csmhb100) 2Core SM Hybrid UL 100
2Core Single Mode Hybrid Ultra Light 100M Fibre Cable
2Core Single Mode Hybrid Ultra Light 100M Fibre Cable
Hybrid: video, power and control signals
Two cores of protected fiber
Copper cable for power connection
Single mode 9/125
Outer cable diameter 7.2 mm.
Colour coded (two yellow rings for 2Core single mode and two red rings for power)
Cable length: 100 meters
Robust male cable connector on both sides
Wound on Schill GT310 drum
Ruggedized connectors fit perfectly the robust outdoor cable material
Screw cap protects perfectly against dust and spray water
Cap, plug and receptacle are sealed according to EN60529 IP67
Connectors: 2 x opticalCON Cable Length: 164' (50 m) Compatibility: CA-FB70 optical fiber camera adapter HXCU-FB70 power supply extension unit HXC-D70K SD/HD studio camera with viewfinder and lens HXC-D70L SD/HD studio camera with viewfinder HXC-D70H SD/HD studio camera
POLECAM RC150 (RC 150 RC-150 RC/150) RCP MK IV RX unit (when ordering remember to specify the cables you will need)
• Control of up to six cameras
• Different camera types accommodated
• Compatible with major manufacturers' cameras; e.g. Camera Corps, Hitachi, Indiecam, JVC, Panasonic, Sony, Toshiba, etc.
• Allows remote operation of Polecam recommended Toshiba and Indiecam cameras
• Remote receiver box (RX) complements the Polecam RCP
• Colour balance, master pedestal, gain, detail and other engineering parameters can be remotely adjusted
• High signal robustness >1500 metres
• Iris control
• Option of joystick remote control for POLECAM pan & tilt head available
• Rack mountable
• Red and green operator tally lights
• Integrates easily into any OB or multicamera set-up
The new Mark IV Polecam universal Remote Control Panel (RCP) provides comprehensive control of up to six camera types using a single balanced audio sine wave data signal.
A remote receiver box (RX unit) complements the RCP Transmitter (TX unit) is operable in excess of 1500m away (at 1200 baud). The data signal can be integrated with many professional RF audiolink systems. The RX Box provides both a 12v DC supply and control data to the camera.
The RCP is ideal for both multi-camera studio and OB work.
A POLECAM rig could be left without an operator and the positional pan and tilt unit be remotely controlled by the RCP in an OB vehicle. e.g. Behind the goal in football.
The new Polecam Universal RCP MK IV remote control panel allows comprehensive and intuitive control of up to six different camera types from a single unit. The control format used is a highly robust audio sine-wave data signal which can run at 1,200, 2,400 or 4,800 baud. This allows the RCP to be linked via balanced audio cable to the RX Box receiver which can be located up to and beyond 1,500 metres away, depending on baud rate and cable quality. The RX Box provides both 12 V DC and control data to the camera. It incorporates a camera channel select switch, all other functions including baud rate selection and camera type being automatic. Other facilities provided by the RX Box include dual tally drive outputs and remote activation of devices such as lens blowers and windscreen wipers.
The Universal RCP MK IV is compatible with ultra-compact HD cameras from manufacturers such as Camera Corps, Hitachi, Panasonic, Sony and Toshiba. Pan, tilt and iris motor drive outputs are also provided. Parameters such as colour balance, master pedestal, gain and detail can be remotely adjusted provided these features are supported within the camera itself. A single pan, tilt and iris drive connector (six-pin LEMO) is provided for integration with a Polecam system and can also be configured to complement various OEM pan/tilt heads and lenses.
Each camera-selection push button on the RCP, when activated, displays the most recently selected menu for its camera. Frequently-used menus for a particular camera type are thus instantly available. Other controls include dedicated white-balance and black-balance buttons, colour-bars selector, black level controls for the red and blue channels plus master black level and iris/exposure. Data output parameters can be adjusted via DIP switches and a data level control.
"For the Polecam user, the Universal RCP MKIV is essential to multi-camera studio and OB work. It can be mounted alongside the existing camera RCPs, enabling colour matching and other adjustments by the engineers. It can also be used to allow pan and tilt of a pre-positioned Polecam rig, behind a football goal for example, to be remotely controlled from an OB vehicle. The panel is very easy to operate, extremely versatile and highly compact: just 110 mm long, 105 mm wide and 60 mm deep. For the multi-camera user, it provides economical control of multiple different cameras from a single panel."
Analog Performance Operating Principle Pressure Gradient Transducer Condenser Polar Pattern Cardioid Frequency Range 20 Hz to 20 kHz Signal to Noise Ratio 74 dB A-Weighted Equivalent Noise Level 20 dB A-Weighted 33 dB ITU-R 468 Maximum SPL 144 dB SPL THD < 1% Impedance 100 Ohms Load Impedance 2 kOhms Sensitivity -40 dB CMRR 40...
Analog Performance Operating Principle Pressure Gradient Transducer Condenser Polar Pattern Cardioid Frequency Range 20 Hz to 20 kHz Signal to Noise Ratio 74 dB A-Weighted Equivalent Noise Level 20 dB A-Weighted 33 dB ITU-R 468 Maximum SPL 144 dB SPL THD < 1% Impedance 100 Ohms Load Impedance 2 kOhms Sensitivity -40 dB CMRR 40 dB...
Datavideo DATA-CB44 (DATACB44, DATA CB44, DATA/CB44, data-cb44) SDI Video, MCU, Intercom & Tally, Look Back and Power All-in-One Cable - 50M
* Coming Soon! *
50M SDI Video, MCU, Intercom & Tally, Look Back and Power All-in-One Cable
Designed for use with CCU-100
Includes HD-SDI, MCU Control Signal, Power, Look Back Video, Intercom and Tally
Features: 100M - HDMI Active Optical Cable Long distance transmission of up to 100 meters Support 4K@60Hz UHD display Supports HDMI 2.0 Supports HDCP 2.2 Plug and play, not driver dependent Thinner, lighter and softer than conventional copper cable EMI / RFI compliant No external power needed
Features: 50M - HDMI Active Optical Cable Long distance transmission of up to 100 meters Support 4K@60Hz UHD display Supports HDMI 2.0 Supports HDCP 2.2 Plug and play, not driver dependent Thinner, lighter and softer than conventional copper cable EMI / RFI compliant No external power needed
DATAVIDEO DATA-CB31 (DATACB31 DATA CB31 DATA/CB31) 50M All in One Video Cable Set