Teradek TER-BIT012-1 (TER/BIT012/1, TER_BIT012_1, BIT-012-1, BIT012-1, ter-bit012-1, 11-0012-1) Hotshoe Mounting Hardware for Fanless Bolt
This is a Hot Shoe Mount from Teradek for fanless Bolt transmitters. It features a 1.75" thumbscrew.
Connector: RP-SMA female Frequency Range:2.4 and/or 5.1-5.8GHz Output Power: 2 dBi or 5dBi Dimensions: 6 in / 15.2 cm Long (end-to-end) Diameter: .5 in base - .25 in tip / 1.2 cm base - .6 cm tip Weight: .6 oz / 17 g per antenna
Teradek TER-BIT118 ( TERBIT118, TER/BIT118, TER-BIT118, BIT118 ) 2-Pin Lemo to PowerTap - Approx 45cm
Features:
Teradek TER-BIT218 ( BIT218 , TERBIT218 , TER/BIT218 , TER BIT218 ) 2-Pin Power to Flying Leads - Approx 45cm
Features:
Teradek TER-BIT318 ( TERBIT318, TER/BIT318, BIT318 , TER BIT318 ) 2-Pin Power to XLR - Approx 45cm
Features:
Teradek TER-BIT610 ( TERBIT610, TER/BIT610, BIT610 ,TER BIT610 ) Battery adapter plate for JVC BN-V438U 7.2 volt batteries to 2-Pin Power
Features:
Teradek TER-BIT625 (TERBIT625, TER/BIT625, BIT625 , TER BIT625) Battery adapter plate for Panasonic VW-VBG6 & CGA-E/625 7.2 volt batteries to 2-Pin Power
Features:
Teradek TER-BIT708 ( TERBIT708, TER/BIT708, TER-BIT708 , TER-BIT708 )2-Pin Lemo to 2-Pin Lemo - Approx 20cm
Features:
Teradek TER-BIT710 ( TERBIT710, TER/BIT710, TERBIT710 , BIT710 ) 2-Pin Power to Barrel Adapter - Approx 45cm
Features:
Teradek TER BIT054 ( BIT054, TERBIT054, TER/BIT054 ,TER BIT054 ) PSU for Bond | Link | Bond II
Features:
Teradek TER BIT085( BIT085, TERBIT085, TER/BIT085, TER BIT085 ) Cat5e to RED DSMC Cable
Features:
Teradek TER-BIT236 ( BIT236, TERBIT236, TER/BIT236, TER BIT236 )2-Pin Power to Flying Leads - Approx 90cm
Features :
Length: 12" (30.5 cm) HDMI Rating: High Speed HDMI Cable with Ethernet Connector: Gold-plated HDMI (Type A Connector) Conductor: 28 AWG Tinned Copper Shielding: Aluminum Mylar Foil and Braid Cable Colour: Black
Length: approx 45 cm
Length: 12inch / 30cm Compatibility: Bolt/Beam to a Panel Antenna
Compatibility: Bolt wireless video transmission systems Thumbscrew size: 1.25" (3.2 cm)
Compatibility: ACI Modules Connector 1: 4-Pin Connector Connector 2: D-Tap Connector RED RCP Control Connector Cable Type: Y-Cable
Cable Type: SD-BNC to BNC Length: 25cm
Compatibility: For Bolt 1000/3000 XT Receiver Frequency Range: 5.1 to 5.8 GHz Antenna Gain: 3 x 16 dBi 2 x 14 dBi Protocol Support: MIMO Standard Material of Construction: UV-Protected Plastic, Aluminum Alloy Battery Mount: V - Mount
Length: 12" (30.5 cm) Connector 1: 2-pin LEMO Connector 2: 4-pin Hirose