Call: +44(0) 208 397 1407
Rated 4.75 / 5
Sell Your Gear Find Out More ›
Covid-19 Update

DPA 4007A Omni Microphone 12mm

code: 4007A
  • £1,680.00
Item out of Stock | Usually dispatched within 24 hours

DPA 4007A Omni Microphone 12mm

d:dicateâ„¢ 4007A Omni Microphone, 12mm

• Linear response up to 40 kHz

• Unbeatable dynamic range

• Extreme SPL handling up to 160 dB

• Close miking, main pair recording or measurement use

The High-SPL Recording Microphone 4007A is a phantom powered (P48) close miking specialist with an extremely linear on-axis response in an extended frequency range from 10 Hz to 40 kHz (±2 dB).

This high-performance condenser omni mic has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD and is capable of handling up to 160 dB SPL peak before clipping occurs, making it suitable for a wide range of applications from AB stereo pair to close miking tasks as well as measurement requirements.

The 4007A has through its total acoustical transparency and ultra-high SPL handling capability gained a reputation as being the first choice for picking up drums, percussion and brass instruments, whenever the natural and non-distorted result is paramount.

4007A is, due to its linear qualities and perfect omnidirectionality, also used as reference microphone in both microphone comparisons and acoustic test equipment.

At any time and with no tools necessary it is possible to transform the basic 4007A microphone into a new configuration by combining it with another DPA microphone capsule or preamp.

View More Details

Directional characteristics: Omnidirectional

Principle of operation: Pressure

Cartridge type: Pre-polarized condenser

Frequency range: 10 Hz - 40 kHz

Frequency range, ± 2 dB: 10 Hz - 40 kHz

Sensitivity, nominal +/- 2 dB at 250 Hz: 9 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted: Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 36 dB (max. 38 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 70 dB(A)

Total Harmonic Distortion (THD): < 0.5 % up to 142 dB SPL peak

Total Harmonic Distortion (THD): < 1 % up to 148 dB SPL peak

Dynamic range: Typ. 124 dB

Max. SPL, peak before clipping: 160 dB

Switchable attenuator, filters etc.: 0 dB / -20 dB

Output impedance: 200 Ω

Cable drive capability: 100 m (328 ft)

Output balance principle: Impedansbalanceret med Active Drive

Common Mode Rejection Ratio (CMRR): > 60 dB

Power supply: 48 V Phantom power (±- 4 V)

Current consumption: 2.8 mA

Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color: Matte black

Weight: 163 g (5.7 oz)

Microphone diameter: 12 - 19 mm (0.47 - 0.75 in)

Capsule diameter: 12 mm (0.47 in)

Microphone length: 170 mm (6.7 in)

Maximum output voltage: 7 V

Polarity: +V at pin 2 for positive sound pressure

Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)

Relative Humidity (RH): Up to 90%

Matching tolerance (frequency response and sensitivity): ± 0.5 dB

Phase deviation for kit: < 5°

View More Details
Be the first to review DPA 4007A Omni Microphone 12mm. Write a review ›