Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: sales@digibroadcast.com
Rated 4.86 / 5 trustedshops.co.uk
Free Delivery On Orders Over £300 incl VAT
Sell Your Gear Find Out More ›
Free Delivery On Orders Over £300 incl VAT

DPA d:fine 4066 Omni Headset Mic, Brown, MicroDot

code: 4066-OL-A-C00-LH
  • £439.82
  • RRP: £480.00
Item Available | Usually dispatched within 24 hours
Loading...

DPA 4066 OL A C00 LH (4066-OL-A-C00-LH, 4066_OL_A_C00_LH, 4066/OL/A/C00/LH)This microphone offers clean and transparent sound quality with lots of headroom. For years, this has been the chosen headset mic for broadcasters as well as theaters on Broadway, as well as in many auditorium and lecture halls. This is due to its pristine sound and durability.The headset construction is unique. You can detach the mic boom from the headset mount to switch it to either the left or right side and then reattach it. Humidity, often an issue in theatrical applications, is not a problem. This microphone is constructed with a double-vent protection system and a drop stopper on the microphone boom. Also, the materials inside the mic are water resistant. These design elements make it very difficult for the microphone to fail due to humidity.The microphone's sensitivity is 6 mV/Pa. This matches the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly, the microphone will be able to handle very high sound pressure levels up to 144 dB SPL before clipping occurs.

Specifications Directional pattern Omnidirectional Principle of operation Pressure Cartridge type Pre-polarized condenser Frequency range 20 Hz - 20 kHz Frequency range, ±2 dB Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB(A) Total harmonic distortion (THD) - Legacy < 1% THD up to 123 dB SPL peak, < 1% THD up to 120 dB SPL RMS sine Total harmonic distortion (THD) - CORE < 1% THD up to 137 dB SPL peak Dynamic range - Legacy Typ. 97 dB Dynamic range - CORE Typ. 111 dB Max. SPL, peak before clipping 144 dB Output impedance 30 - 40 Ω Cable drive capability Up to 300 m (984 ft) Power supply (for full performance) For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance Connector MicroDot Color Black, beige or brown Weight 14 g (0.5 oz) incl. Cable and MicroDot connector Microphone diameter 5.4 mm (0.21 in) Cable length 1.2 m (3.9 ft) Cable diameter 1.6 mm (0.06 in) Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin Temperature range -40°C to 45°C (-40°F to 113°F) Relative humidity (RH) Up to 90%
Be the first to review DPA d:fine 4066 Omni Headset Mic, Brown, MicroDot. Write a review ›
Top