Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: Sales@digibroadcast.com
Free Delivery On Orders Over £250
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›

Ewa Marine U-BXP Underwater Housing

code: U-BXP
  • £229.00
  • RRP: £249.99
Item Available | Usually dispatched within 24 hours
Loading...
Free Delivery On Orders Over £250

Ewa Marine U-BXP (UBXP, U BXP, U/BXP) underwater housing as U-B but allows for hot-shoe mounted flash

The housing can be used on small boats, in the surf, while swimming, snorkeling or diving. It`s easy to operate as the camera as its various components and buttons can be operated through the PVC.

The U-BXP is specially designed to fit the bulky, professional digital SLR cameras like the EOS 1D, 1Ds series, or the Nikon D300, D800, D3, D4 und Canon 5D Mark II, 5D Mark III, EOS 1DX and similar cameras. Smaller SLR cameras then the mentioned above can still be used in the housing.

please note: In this housing you can only use lenses till a maximum filterthread diameter of 72mm. If you are using lenses with a 77mm or a 82mm filterthread, then you must use the U-BXP100 housing.

With this housing, a whole new world of applications opens up for your professional digital SLR camera: Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 50 m / 150 ft.

If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why ewa-marine housings are so safe to use: implosions are impossible) Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised.

The U-BXP housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.

It is supplied in a handy yellow carry-case which has a water-proof interior.


width 220 mm (8 2/3 inches)
hight 370 mm (14 1/2 inches)
depth 100 mm / 200 mm with extended tube (4/8 inches )
front port diameter 75 mm ( 2 15/16 inches )
Your lens diameter 72 mm max. filter thread ( 2 14/16 inches )
weight 850 g ( 1,9 lbs )
 
You will receive the following with your new U-BXP:

ewa-marine housing in it's packaging
yellow carry-case which has a water-proof interior
manual for ewa-marine SLR-photo housings
initial supply of CD5
specially profiled foam padding
CA-Adapter Set (for filter threads 52, 55, 58 and 62mm)
 
Be the first to review Ewa Marine U-BXP Underwater Housing. Write a review ›
Build Your Own Bundle
Top