HedBox RP-DC30 (RP/DC30, RP DC30, RPDC30, RP_DC30, rp-dc30) Traveler Battery Charger
The Hedbox DC30 Battery Charger features a two-colour LED display to denote the charging or charged status of the fitted battery and can be operated from mains power or via 12V-24V DC power source (optional adapter cable required). Just like the DC40 and DC50 battery chargers the DC30 utilises interchangeable battery plates meaning a huge number or different batteries can be charged with the DC30. Visit https://www.hedbox.com/products/battery-chargers/rp-dc30/ to use the Battery Plate Selector to find the correct Hedbox Battery Plates for you.
Intelligent charging technology within the DC30 allows much finer control over the charging process than regular chargers. As a safety precaution with high capacity batteries a pre-charging stage is used. The charging cycle is initiated with a low current and if there is no corresponding rise in the battery voltage it indicates that there is possibly a Short Circuit in the Battery (zero voltage activation). Constant Current / Constant Voltage (CC/CV) charging is an effective way to charge Lithium-Ion batteries and works by applying a constant current charge to the battery when it is nearly empty and the charger CPU automatically adjusts the charging current to be lower than the maximum charging current that the battery can accept. With constant charging the voltage of the battery is slowly increasing until the battery voltage reaches the max charging voltage at which point the charger makes sure the charging voltage is fixed as “constant voltage” and reduces the charging current until the battery is fully charged. The DC30 comes with worldwide plug-clips providing out of the box use worldwide.
In the box