Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: Sales@digibroadcast.com
Free Delivery On Orders Over £300 incl VAT
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›
Free Delivery On Orders Over £300 incl VAT
Sell Your Gear
warranty on this product

IDX EP-9/2 2 x ENDURA-HL9 Batteries, 1 x VL-2Plus Charger

code: EP-9/2
  • £896.00
  • RRP: £1,200.00
Item Available | Usually dispatched within 24 hours
Loading...

Idx EP-9/2 (EP92, EP 9 2, EP/9/2, ep-9/2) 2 x ENDURA-HL9 Batteries, 1 x VL-2Plus Charger with AC Adaptor (60W)

E-HL9

87Wh Li-ion V-Mount High Load Battery with PowerLink & Digi-View

Our exclusive PowerLink feature connects two E-HL9 batteries for a total power capacity of 174Wh. The 6-step 5 LED power status display gives an accurate reading of capacity in 20% increments plus the last 10%.. The E-HL9 supports Digi-View for reading battery levels in many of today’s camera viewfinders. Battery Management System (BMS) can be used for enhanced diagnostics and a comprehensive review of the battery’s history of use. E-HL9 Power Status is an accurate display of the E-HL9’s remaining power. Visually and instantly indentified at any time or shown in the camera viewfinder via Digi-View.

FEATURES:

    With a continuous draw of up to 10 Amps, the E-HL9 has an impressive capacity using highly durable cell technology.
    High-load capacity results in 50% higher discharge rate for this series.
    Advanced low temperature discharge characteristics prohibit a voltage drop off down to –4 degrees Fahrenheit in extreme environment conditions.
    Longer overall lifecycle—operators can expect about 10% longer battery viability when the 500-cycle level is reached.
    PowerLink technology allows two E-HL9 batteries to be docked together, doubling capacity up to 176Wh for longer run times and high power needs.
    Digi-View gives the camera operator an accurate display of the E-HL9’s remaining capacity, shown via the camera’s viewfinder.
    5 Power Status LEDs are located on the side of the E-HL9 for a quick and accurate check of remaining capacity, shown in increments of 20%.
    BMS is a unique software package that enables users to monitor the history and condition of their batteries to increase their life span. BMS gathers battery data and provides PC access to a comprehensive database, invaluable when managing large fleets of ELITE, E-10 and E-HL9 batteries.
    Battery circuit protection ensures the E-HL9 is fully protected against common causes of battery misuse, guarding against over charge, over discharge, over current and exposure to high temperatures.
    Most environmentally friendly and safest battery in its classification.
    Weighing only 1.63 lbs., the E-HL9 is compact and durable, ideal for regular use and transportation to and from location.
    Attaching E-HL9 batteries to cameras without a standard V-Mount connection is possible through the use of P-V2 and P-VS2 adaptor plates, available separately from IDX and can be fully recharged using an ENDURA sequential or simultaneous charger.
    Please note that IDX measures the capacity of Lithium Ion batteries as minimum capacity.

VL-2Plus

2-Channel Sequential Quick Charger with AC Power Supply Adaptor (60W DC @ 13.8V)

The lightweight and durable VL-2PLUS delivers sequential 2-channel charging with unrivalled high speed and reliability, with the advantage of an integrated 60W power supply. Like all of our VL Series, the VL-2PLUS is a multi-chemistry charger for both Li-ion and Ni-Cad battery types.

FEATURES:

    Sequential 2-channel charging in either position. The VL-2PLUS will charge the first battery connected to either VMount channel, automatically switching to charge the second battery after the first is fully charged.
    Integrated 60W DC power supply provides 60W XLR output for the camera, lighting and ancillary broadcast devices.
    VL-2PLUS compatible batteries: All ENDURA V-Mount Li-ion batteries, and all NP Li-ion/Ni-CD batteries from IDX can be charged with an A-E2NP adaptor, available separately.
    Internal safety features protect both the battery and charger from serious damage should faulty or misused batteries be placed on charge. The VL-2PLUS will automatically stop charging should any battery reach an over voltage condition.
    Lightweight, high impact polycarbonate enclosure weighs a total of just 2 lbs., and features a recessed power switch and integrated carry handle.
    Universal AC input voltage for worldwide operation.

 

E-HL9

    Battery Capacity: 14.4V, 6.0Ah, 87Wh
    Max. Output Voltage: 16.8V DC
    Nominal Voltage: 14.4V DC
    Maximum Discharge Current: 10A (120W)
    End Voltage: 12V
    Battery Protection:

Over charge (reset)
Over discharge (reset)
Over current (reset)
Temperature protection (non reset)

    Ambient Temperature:

To charge:
32°F ~ 104°F (50°F ~ 86°F recommended)
To discharge:
-4°F ~ 113°F (50°F ~ 104°F recommended)
To store:
-4°F ~ 140°F (32°F ~ 68°F recommended)

    Dimensions: 3.35(W) x 5.51(H) x 2.28(D) inches
    Weight: 1.63 lbs. approx.

VL-2Plus

    Input Voltage: AC 100~240V 50/60Hz
    Power Consumption: 140VA max.
    Quick Charge Current:

2.3A (Li-ion)
1.9A (Ni-CD)

    DC Output: 60W (4.3A @ 13.8V)
    DC Output Connector: 4-pin XLR (included)
    Operating Temperature: 32°F ~ 104°F
    Dimensions: 5.94(W) x 3.11(H) x 8.35(D) inches
    Weight: 2.09 lbs. approx.

 

VL-2PLUS Battery Charging Time Chart

 

Be the first to review IDX EP-9/2 2 x ENDURA-HL9 Batteries, 1 x VL-2Plus Charger. Write a review ›
Top