This site uses cookies to provide and improve your shopping experience. By continuing to use this site, you agree to accept these cookies. For more information, please see our Cookies PageCookies Page.
This Dual-Module Desktop Enclosure with pre-installed xMac mini and eGPU Modules. It includes two Thunderbolt 3 (40 Gbps) cables, two power cables, and one ThunderLok 3 Thunderbolt connector retainer clip. It is compatible with the Intel Mac mini.
The pre-configured DuoModo™ xMac™ mini/eGPU Desktop System integrates a Dual-Module Desktop Enclosure with one xMac mini module and one eGPU module.
System Configuration: For Intel® Mac mini®
Dual-Module Desktop Enclosure Features:
Dual-module Enclosure
Rugged Aluminium Housing
6.9 inches Wide x 16.7 inches Deep x 9.1 inches High
xMac mini Module Features:
Securely Holds Intel Mac mini (sold separately) in a Rugged Steel Frame
Open Access to the Computer’s Ports in Back
Built-in Thunderbolt™ 3 Dock
Four Front Panel Ports Include One Thunderbolt 3 (40Gbps) Port, Two USB 3.2 (10Gbps) Type-C Ports, and One USB 3.2 (10Gbps) Type A Port
Two Internal M.2 NVMe SSD Sockets – Add up to 16TB (SSDs sold separately)
One Internal USB 3.2 (10Gbps) Type A port (for Securely Connecting an iLok USB-A, Thumb Drive, or Bus-powered USB Storage Drive)Internal Thunderbolt 3 (40Gbps) Port Connects Dock to the Mac mini
Supports the Latest Thunderbolt Compatible GPU Cards ( View PDF of Supported GPU Cards)
Supports 2.5-slot Width GPU Cards
800W Future-proof Design
Includes Two 8-pin (6+2 pin) Auxiliary Power Connectors
Dual Temperature-controlled, Variable-speed Noctua fans rated at 17 dbA
40Gbps Thunderbolt 3 Interface Offers 2750 MB/s of PCIe Bandwidth to the Installed GPU Card
Power Cable Included
Thunderbolt 3 (40Gbps) Cable Included
ThunderLok 3 Thunderbolt Connector Retainer Clip Included
xMac Mini Module:
Mac Compatibility
Mac mini® (2021 M1), macOS® 11.3+
Mac mini (2018 Intel® current version), macOS 10.14.6 - macOS 11.3+
Mac mini (Late 2014) with Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter plus a Thunderbolt 2 cable (both sold separately)
macOS 10.12.6 - macOS 11.3+
Mac mini (Late 2012) with Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter plus a Thunderbolt 2 cable (both sold separately)
macOS 10.12.6 - macOS 10.15.7+
Form Factor:
Expansion system module
Front Panel Connectors:
One Thunderbolt (USB Type-C) port
Two USB 3.2 (10Gbps) Type-C ports
One USB 3.2 (10Gbps) Type A port
Internal Connectors:
One Thunderbolt (USB Type-C) port to Mac mini
One USB 3.2 (10Gbps) Type A port for thumb drive or dongle
Two M-keyed (NVMe) M.2 sockets (each connected at PCIe x2)
SSDs (See Note*):
One or two M.2 2280 NVMe PCIe SSDs (with or without heat sink)
Power Supply:
Universal 96W, 100-240V AC, 50-60Hz
C14-type power connector
Operating Temperature: 0ºC to 35ºC (32ºF to 95ºF)
Dimensions (WxDxH): 3.3 x 16.4 x 8.5 in. (8.4 x 41.6 x 21.7 cm)
Weight: 4.95 lbs (2.25 kg)
Compliance:
RoHS 3 (Directive 2015/863)
IEC62368-1 and IEC62368-2
*Note:
macOS 10.14.6+ supports both 512 and 4k block size SSDs, but macOS 10.13.6 supports only 4k block size SSDs. SSDs 1TB or larger are shipped from the factory programmed with a 4k block size. If you have smaller SSDs that are programmed with 512 block size, and you need to be compatible with macOS 10.13.6, you may need to reprogram your SSDs to a 4k block size.