Panasonic Camera Control Unit (CCU) for AK-UC4000 - Lemo Connector

Panasonic PAN-AKUCU600ESJ (PAN_AKUCU600ESJ, PAN/AKUCU600ESJ, PAN AKUCU600ESJ) Camera Control Unit (CCU) for AK-UC4000 - Lemo Connector

The Panasonic AK-UCU600PJ CCU supports not only UHD and HD simultaneous output, but also enables high-speed output*1 up to 240p in HD mode*2 to be performed simultaneously with standard (1x) output, while still having a compact size.

With the AK-UCU600 Camera Control Unit (CCU), uncompressed long distance transmission of 4K/HD video signals via optical fibre is supported. The AK-HRP1000GJ/1005GJ Remote Operation Panels (ROP) are equipped with a colour LCD display that provides excellent visibility and functions forquick response. This system achieves high-quality video and excellent operability. In cases where power is supplied by the CCU, it is possible totransmit at a long distance of up to approx. 2,000 m between the camera and the CCU. The distance can be extended up to 10,000m by providing a local power supply at the camera head and using general-purpose singlemode optical fibre. Between the CCU and the ROP, in addition to a dedicated serial line, IP connection via LAN cable is also supported.

• Power Supply: 100 V - 240 V AC, 50 Hz/60 Hz
• Power Consumption: 500 W (Without camera connected: 90 W)
• Capacity for Supplying Power to a Camera: 240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Humidity: 10% to 90% (no condensation)
• Weight: Approx. 8.8 kg (19.4 lb)
• Dimensions (W x H x D): 424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions)
• Video Output: "3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals) HD/SD-SDI: 1 line (shared with picture monitor output*1 ;embedded audio is supported only for HD signals)"
• HD TRUNK/TICO Output: HD-SDI: 1 line (HD TRUNK output) 3G/HD-SDI: 1 line (TICO output)
• Return Input: 3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output) Analog composite: 1 line
• Prompter Input: HD-SDI: 1 line (with active-through output) Analog composite: 2 lines (through output of 1 and input of 2 share the connector* 1 ) It is not terminated when the unit is turned OFF. No through output.
• Reference Input: BB (black burst) / tri-level*2 : 1 line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
• Microphone Output: 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)
• Communication: Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines* 1 PGM input (0 dBm/600 Ω) : 2 lines Tally input (red, green, yellow) : 1 input each
• AUX:  WFM control 6-bit (open collector output, terminal shared with camera microphone gain setting*1 ) Camera microphone gain setting input 5-bit (photo-coupler input, terminal shared with WFM control* 1 ) Down-conversion system setting input 2-bit (photo-coupler input)
• TRUNK: RS-422 / RS-232C 2 lines* 1
• FRONT ROP: RS-422 1 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menu or the [ROP FRONT/ REAR] selection switch on the front panel)
• REAR ROP: RS-422 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
• MSU: RS-422 1 line, GPI for control
• LAN TRUNK* 3: LAN connection with camera side via an optical cable* 4 1 line, 100BASE-T, 1000BASE-T
• LAN: Personal computer connection for distribution via the Web* 4 1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer)

In the box

• 1x Panasonic AK-UCU600EJ Control Unit