GoPro GP3052 (GP 3052, GP-3052, GP/3052) Hero3+ Standard Replacement Housing
Waterproof to 131'/40M, the GoPro Replacement Housing delivers maximum image sharpness above and below water. Includes Replacement and Skeleton Backdoors.
Waterproof to 131'/40M
Delivers maximum image sharpness
Includes Replacement and Skeleton Backdoors
GoPole GA0212 (GA 0212, GA-0212, GA/0212) GoPole Evo - Transparent Extension Pole 66cm for GoPro cameras
- 2 stage telescopic adjustment from 14 – 24 inches
- Removable GoPro Wi-Fi/Smart Remote clip – new!
- Threaded ¼ inch tripod insert at base of pole – new!
- Direct GoPro attachment
- Fully watertight and it now floats! – new!
- Includes wrist strap for added security
- Fully transparent design makes it seemingly disappear
- Hi-Torque Thumbscrew included – new!
GoPole GA0203 (GA 0203, GA-0203, GA/0203) GoPole Bobber - Floating Hand Grip for GoPro cameras
Atomos AO-ATOMCAB012 (AOATOMCAB012, AO/ATOMCAB012, AO ATOMCAB012, ATOMCAB012, ao-atomcab012) Full HDMI to Full HDMI Straight Cable (50cm)
Atomos straight micro HDMI to micro HDMI cable (50cm).
The unique design provides quick, separate access to your Pro DSLR with battery grip and up to a 300mm lens attached, 6-8 lenses, camera body, and flash. The Bug is designed additionally to accommodate a video configuration to give quick access to your DV camcorder and accessories. The quick access opening lets you get to...
PAG 9304 PAGlink PL96T Time Battery
Model 9304 FEATURES:
The PL96T is a high-power, intelligent linking battery, and part of the PAGlink system.
PAGlink is the only system that allows you to combine the capacities of two to eight batteries in any state of charge, to achieve super-high capacities and a higher current-draw capability.
It is the only system that allows you to charge batteries whilst linked.
PAGlink batteries can be used individually or linked to power a variety of cameras including: high-definition broadcast cameras, digital cinema and 3D camera set-ups, HDSLRs and handheld camcorders.
An individual PAGlink battery has a capacity of 96 watt-hours, making it unrestricted, in quantity, for air transportation. Linking two batteries doubles the capacity to 192Wh; three batteries provide 288Wh. No other system offers as much power.
Hard-wearing, heavy duty contacts are incorporated for high-current applications. The rated maximum continuous output is 12A when linked (8A individually).
PAGlink is smarter. Other manufacturers use more expensive cell-technology to sustain a current draw of only 10A, while PAGlink achieves a superior 12A, using cheaper, standard Li-Ion technology.
As well as being smarter, PAGlink batteries are smaller and lighter, with a higher energy density than any linking system marketed to date.
Linked batteries form a high speed serial network that enables them to communicate with each other to control charge and discharge.
The rear battery can be hot-swapped for constant, uninterrupted camera power.
The battery features long-life, premier-quality Li-Ion cells, which have no memory effect, and are completely recyclable. In keeping with PAGs total battery design philosophy it is designed and constructed to provide the longest possible working life.
The PL96T Time Battery incorporates a numeric run-time and capacity display, unique to PAG. Remaining run-time is shown, on-load, expressed in hours and minutes, to a resolution of 1 minute. Remaining capacity is shown as a percentage (1% increments).
The display maintains its accuracy by tracking the performance, and adjusting calibration values to compensate for the ageing of the cells, and does not require a periodic Ã¢€˜serviceÃ¢€™ charge.
The PL96T can be linked to a PL96e battery to provide a numeric display of remaining run-time for all linked batteries.
PAGlink batteries support four different data systems that display capacity in the camera viewfinder: Sony, IDX, Red and Anton-Bauer, and adapt automatically when connected.
PAGlink batteries store data in their microprocessor, such as capacity, voltage, number of cycles and software version, which can be revealed using the PAGlink Battery Reader (Model 9647), to assist with the management of battery stocks.
The battery software can be updated using a PAGlink Battery Programmer, ensuring that you benefit from PAGs continually advancing technology.
PAGlink batteries can be charged while linked, using any reputable V-Mount Li-Ion charger.
The new, 2-position PL16 charger (Model 9707) will simultaneously charge up to 16 PAGlink batteries (8 on each position), from any state of charge.
PAGlink batteries display their individual status during charging. When using the PL16 charger, the PL96T numeric display can be inverted, for legibility, with a single button press, and reverts automatically after removal from the charger.
The PL96T has been independently tested and certified to comply with UN transport safety regulations. Its capacity is below 100 watt-hours and it is therefore suitable for air transport on passenger aircraft, in hand-luggage, without quantity restriction.
The batterys advanced electronic protection system is fail-safe and features Parylene coated circuits to protect against electrolyte.
Enhanced low temperature performance allows PAGlink batteries to operate at -20°C.
PHU-120K Specifications: Interface: ExpressCard™/34 USB2.0 Transfer speed: 24 MBps (190 Mbps) Operating voltage: DC 12 V ±0.5 V, Battery: 14.6 + 1.8V /–0.0 V Power consumption: TYP. Approx.2.5 W, MAX. Approx.4.0 W Operating temperature: 0° C to 40° C Operating relative...
Specification: D-8161A Voltage:14.4V Capacity:190Wh Max Output Power:80W Max Output Current:5.5A Over Current Protection:10A Mount Type:Gold mount Operation Temperature:0 - 40 °C Net Weight:Approx 1.3kg Dimensions:168×98×70mm
Cable Mogami ultra-flexible shielded quad Connectors Locking 4-pin Multi-Pole Compatibility VZ-MC100 remote head
Nominal Voltage 14.4V Capacity 115Wh Max Output Power 150W Max Output Current 12A Mount Type V-mount Operation temperature 0- 40°C Net Weight Approx 0.9kg Dimension 165x90x51mm
Panel Size: 7" LED backlit Physical Resolution: 1280×800 Aspect Ratio: 16:9 Brightness: 400cd/㎡ Contrast: 800:1 Viewing Angle: 178°/ 178°(H/V) (IPS) Input Signal: HDMI×1, Composite×1, AV×1, Shutter Port×1 Output Signal: HDMIx1 Audio: Speaker×1(built-in), Ear Phone Slot×1(built-in) Current: 960mA Input Voltage: DC 7-24V Battery Plate: V-mount, Anton Bauer mount, F-970, QM91D, ...
Voltage 7.2V Capacity 21Wh Max output power 30W Max output current 4A Over current protection 6A Compatible battery Panasonic CGA series D54S/D28S Applicable camera Panasonic DVX-100, HVX200/201 Net weight Approx 0.18kg Dimensions 60×36×55mm
SPECIFICATIONS: Mounting Method Hot-shoe and female 1/4`` Battery life - Alkaline 75.0 min Battery life - NiMh (1000mAh) 360.0 min battery type 6 x AA beam angle 30.0 ° colour temperature 5600 K CRI (Color Rendition Index) >90 Dimmable yes 0-100% without flickering Lux @ 1m 900.0