Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: sales@digibroadcast.com
Rated 4.86 / 5 trustedshops.co.uk
Free Delivery On Orders Over £300 incl VAT
Sell Your Gear Find Out More ›
Free Delivery On Orders Over £300 incl VAT

Dedolight DLED4SE-BI Studio DLED4.0SE-BI 40W Head with Power Supply

code: DLED4SE-BI
  • £1,015.00
  • RRP: £1,015.00
Item Available | Usually dispatched within 24 hours
Loading...

Features:

  • State-of-the-art LED light source with features exclusively developed by Dedolight
  • Dedolight patented aspherical optics
  • The continuously variable 3200-5600K LEDs make matching existing light sources a snap
  • Provides astoundingly high efficiency in output
  • Unprecedented wider and tighter focusing range
  • Dedolight clean beam concept. Controlled precision beam with no stray light outside the fixture and perfectly even light distribution within the beam
  • Complete light-shaping control:
  • Scrims, graduated gray filters, aspherical wide-angle attachments with rotating barndoor leaves
  • Dedolight imager projection attachments for light framing, soft edge light framing with eye filters, gobo projection, background effect projection, slide projection
  • Included DT4.0-1BI Power Supply (100-260 VAC) provides stable power that's dimmable from 100-20%

Dedolight DLED4SE-BI (DLED4SE/BI, DLED4SE_BI, dled4se-bi) Studio DLED4.0SE-BI 40W Head with Power Supply

Having paved the way with the on-camera Ledzilla LED and the 1 x 1' stand-mounted Felloni Dedolight continues to forge ahead with the introduction of the bi-color Studio DLED4.0SE-BI 40W Head with Power Supply. Again, using aspherical lens elements results in an amazing 1:20 flood to spot ratio with a beam angle of 60-4 degrees that delivers 7050 lux in spot mode at 3.0' (at 5600K) with no UV radiation emitted. A wide angle attachment increases coverage 85 - 54 degrees.

Color balance, always a problem especially when working in mixed lighting, is no problem at all with the DLED4.0-BI. Set your color temperature to 3200 or 5600K or anywhere in between. The 5600K setting is great with HMI and flash sources. The 3200K setting is perfect for use in areas with dominant ambient light emitted by architectural fixtures and blends well with traditional tungsten hotlights. As is characteristic of LED sources, the DLED4.0-BI generates negligible heat. The DLED4.0SE-BI is powered by the included 100 to 260 VAC DT4.0-1BI power supply that is conveniently affixed to the yoke. The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100-20%. A full line of accessories from scrims and filters to Dedolight Imager projection attachments is available.

Dedolight DLED4.0SE Specs
Light Fixture

  • Beam Angle: 4 to 60°
  • Color Temperature: 3200 to 5600K
  • Cooling System: Passive
  • Dimming: Yes, 20 to 100% (Continuous)
  • Display: None

Fixture Dimensions:

  • Flood: 6.4 x 4.3 x 3.9" / 16.2 x 11.0 x 10.0 cm
  • Spot: 7.9 x 4.3 x 3.9" / 20.0 x 11.0 x 10.0 cm
  • Fixture Weight: 3.0 lb / 1.36 kg

Mounting

  • Yoke Mount: TVMP/ Hex Bolt
  • Fixture Mount: 5/8" Receiver
  • Accessory Mount: None

Power

  • AC Input Power: 100 to 260 VAC, 50 / 60 Hz at 0.4 A
  • DC Input Power: 40 VDC
  • Power Source: AC Adapter

Cable

  • Cable Length: 8.2' / 2.5 m

Power Supply

  • Power Supply Dimensions: 6.0 x 2.8 x 2.0" / 14.2 x 7.2 x 5.0 cm
  • Power Supply Weight: 2.2 lb / 1.0 kg

Physical

  • IP Rating: IP40

In the Box

  • Dedolight Studio DLED4.0SE-BI 40W Head with Power Supply (Bi-Color)
  • DLED4.0 LED Daylight Light Head with U-Shaped Studio Yoke
  • Dedolight DT4 Power Supply (90-260 VAC)
Be the first to review Dedolight DLED4SE-BI Studio DLED4.0SE-BI 40W Head with Power Supply. Write a review ›
Top