Kino Flo CFX-2402 (CFX2402, CFX 2402, CFX/2402, cfx-2402) 2ft Double Fixture
The popular Double portable lighting system needs no introduction. The trim profile of the fixture and lightweight design makes it perfect for both soft key and fill lighting in tight locations. Features are:
The 2-Lamp Fixture
• Built-in Barndoors
• Removable Lamp Harness, Reflector and Louver
• Twist-on, locking Center Mount
• True Match® daylight and tungsten lamps
|Double System Highlights|
• 2-Lamp remote fixture w/ built-in barndoors
• Fixture includes Reflector, Louver, and removable Harness
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to tape to wall
• Removable center mount
• Fixture or lamps w/ harness run up to 75 feet (24 meters) from ballast
• High output, flicker-free ballasts
• Instant-on, dead quiet
• Individual lamp switching - no color shift
• HO/Std switching
• Same ballast runs 4ft and 2ft lamps
• UL listed, CE approved
The Double fixture houses the lamps and includes a removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners. There is a strain relief on the lamp harness to ensure the connectors don’t pull off the lamps during operation. To get the harness away from the fixture, turn the ¼ turn fastener and rotate counter-clockwise to release.
The Harness wiring is color-coded. The same color-code must match at each end of the lamp for proper operation.
Fixture can be used in several configurations:
1) Complete fixture with all components combined
2) "Harness Only" - The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated independently of the fixture.
3) "Harness + Reflector" - Same as above, but may want to use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area.
The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for blue and green screen as well as designer colors are available.
Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or independently with only the wiring harness. Additionally, on a production set the lamps are changed out. Safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.