Teradek TER-10-0659-VU (TER/10-0659-VU, TER/10/0659/VU, TER 10 0659 VU, TER100659VU) TER-10-0659-VU Bond AVC Backpack with MPEG-TS - V-Mount
NEXT LEVEL MOBILE BROADCASTING
The Bond Backpack is an all-in-one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.
HIGH GAIN ANTENNAS
Wireless reception for Teradek Node modems is greatly enhanced with two high-gain antennas attached to the interior of the backpack.
GOLD OR V MOUNT BATTERY PLATE
Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.
NODE MODEMS
Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.
INTEGRATED LOCKING CABLES
To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.
AVC BONDING CODEC
At the heart of the Bond Backpack is the Cube encoder, a High Profile AVC encoder that supports bitrates up to 15 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. HEVC encoders are also available. Please see Bond 759.
ACTIVE COOLING
To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.
ERGONOMIC, WEATHER RESISTANT DESIGN
The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.
Minimum Focus Distance: 3.5' / 1.1 m
Compatibility: 19 and 15mm Rods
Teradek TER-10-0659-GU (TER/10-0659-GU, TER/10/0659/GU, TER100659GU, TER 10 0659 GU) Bond AVC Backpack - MPEG-TS - Gold Mount
NEXT LEVEL MOBILE BROADCASTING
The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.
HIGH GAIN ANTENNAS
Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.
GOLD OR V MOUNT BATTERY PLATE
Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.
NODE MODEMS
Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.
INTEGRATED LOCKING CABLES
To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.
AVC BONDING CODEC
At the heart of the Bond Backpack is the Cube encoder, a High Profile AVC encoder that supports bitrates up to 15 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. HEVC encoders are also available. Please see Bond 759.
ACTIVE COOLING
To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.
ERGONOMIC, WEATHER-RESISTANT DESIGN
The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.
Compatibility: Teradek RT Power Source: Camera Mounting: 1 x Clamp
Compatibility: Bolt 4K Transmitter, 4x Receiver and Antenna Array
Case: Bolt 500 XT / 1000 LT
Physical Lid Depth: 1.50 in (3.81 cm) Base Depth: 3.00 in (7.62 cm) Interior Length: 12.00 in (30.48 cm) Interior Width: 9.00 in (22.86 cm) Interior Depth: 4.50 in (11.43 cm) Interior Cu Volume: 0.28 cu ft (0.01 cu m) Exterior Length: 13.18 in (33.48 cm) Exterior Width: 11.12 in (28.24 cm) Exterior Depth: 5.21...
Teradek TER-11-1416 (TER/11-1416, TER/11/1416, TER111416, TER 11 1416) RT Case for MK3.1 System with Up to 3x Motors
Use the RT MK3.1 System Case from Teradek to transport a complete MK3.1 lens control system. The interior of this hard case has a foam interior custom-cut to fit up to three lens motors, one receiver, eight marking disks, and accessories such as a thumbwheel. The MK3.1 System Case is a dust-proof, waterproof case with an integrated pressure valve. Your receiver and motors may be stored attached to their mounting brackets, saving you time when reassembling the system.
Module USB: Up to five USB devices Connectivity: Ethernet and Wi-Fi (built into Cube) Up to four iOS devices Compatibility: Cube 605/655, 715/755, 805/855 Interfaces: Controlled through Cube 4x powered USB 2.0 host port Battery: Internal lithium-ion Power Consumption: Nominal: 0.5 W, up to 5 W per USB device Power supplied by Cube Temperature: Operating:...
Construction: Milled Aluminum (Chassis), regulation compliant PCB Mountability: 1/4"-20 threaded hole, 2x 4-40 threaded holes (Additional mounting options available) Power Power Input: 2-Pin Connector, 5-28V Battery: None Nominal Power Consumption: 5W Max Interface Interface: 2 Status LEDs, 4-pin to 4-pin connector Network Lte: EU/Asia: LTE FDD Cat 4, Bands 1,3,5,7,8,20 (Please see other models for...
