Teradek TER-BIT777 (TER/BIT777, TER_BIT777, BIT777, BIT-777, 11-0777, ter-bit777) 3 Holes Velcro Mounting Bracket for Bolt
keeps your Bolt unit looking nice with this mounting bracket for attaching velcro and preventing heat from the Bolt unit from melting the velcro.
In The Box 1 x Sidekick mounting bracket 2 x 4-40 screws for attaching to transmitter 2 x 1/4"-20 mounting screws to mount bracket to camera/monitor cage 1 x 3/32" Allen Wrench
Teradek TER-BIT773 (TER/BIT773, TER_BIT773, BIT773, BIT-773, ter-bit773, 11-0773) COLR Mounting Bracket
The COLR Mounting Bracket from Teradek allows for multi-angle 1/4-20" mounting.
Teradek TER-BIT779 (TER-BIT779 , TER-BIT779, TER-BIT779, TER-BIT779 ) Cube 655 Hot Shoe Mounting Combo Kit
Features :
Teradek TER-BIT770 ( BIT770, TER BIT770, TER/BIT770, TER BIT770 ) Dual AB to V Mount Conversion Plate
Features :
Gear Type: 0.4mod Motor Gear Compatibility; MK3.0 Motor MK3.1 Motor Panavision Canon
Gear Type: 0.5mod Motor Gear Compatibility: MK3.0 Motor MK3.1 Motor Canon Angenieux
Gear Type: 0.6mod Motor Gear Compatible Lenses/Functions Including but not limited to: Fujinon ENG focus/zoom Panavision zoom 1
Teradek TRT-11-1423 (TRT/11/1423, TRT_11_1423, TRT111423, 11-1423, trt-11-1423) 0.8mod Motor Gear
This RT Motor Gear (0.8-Mod) from Teradek is designed for use with an RT MK3.1 or MK3.0 lens control motor. This 32-pitch gear is compatible with the focus, iris, and/or zoom rings on select cine and/or ENG lenses as listed below.
Compatible Lenses/Functions
Teradek TRT-11-1424 (TRT/11/1424, TRT_11_1424, TRT111424, 11-1424, trt-11-1424) 0.8mod Motor Gear Wide - Double Thick
This RT Motor Gear (0.8-Mod Wide) from Teradek is designed for use with an RT MK3.1 or MK3.0 lens control motor. The wide surface of this gear provides a larger interface for lens barrels that move through an extended focus or zoom range. This 32-pitch gear is compatible with the focus, iris, and/or zoom rings on select cine and/or ENG lenses as listed below.
Compatible Lenses/Functions
Features: MK3.1 Motor Bracket For 19mm and 15mm rods Replacement/spare bracket for the Motor MK3 and MK3.1. Fits 19mm and 15mm rods, using the included adapter bushing
Features: MDR-MB Receiver Bracket Designed for MDR-MB (Includes screws) Can be fixed to the MDR-MB to give two mounting points as well as a 1/4-20" thread
Features: Cheeseplate for DSMC2 / Latitude-SK Fit directly onto the RED DSMC2 body's Sidekick slot Fit directly onto the MDR-SK DSMC2 module
Compatibility: 15mm and 19mm rods
Compatible: MOTR.X and MK3.1 Motors Supports: 15 and 19 mm Rods
Dimensions: 6.43in x 3.74in x 0.83in (163.4mm x 95mm x 21mm) Weight: 150g
Compatibility: Bolt 4K TX
