Matthews Mathews slider stand

Mathews slider stand(MD_249561, MD/249561, MD 249561, 249561) The Slider Stand comes standard with two rocky mountain legs for easy levelling on hills, mountainsides, rocky environments, stairs and most other uneven terrain. As a comparison, the Slider Stand minimum working height measures one foot (30cm) lower than the standard low boy combo, giving the camera operator a POV range from hip to eye level.

Matthews Kit Stand- Light/Heavy Duty Triple Riser (Black)

Matthews Kit Stand- Light/Heavy Duty Triple Riser (Black)(MD_B387490, MD/B387490, MD B387490, B387490) For a lightweight Kit stand this larger version provides a little extra support, height and stability compared to the average – built to Matthews high standards an excellent addition if you need a little extra! Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the use of heavier fixtures. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality

Matthews Kit Stand - Light/Heavy Double Riser -Black

Matthews Kit Stand - Light/Heavy Double Riser -Black(MD_B387487, MD/B387487, MD B387487, B387487) This lightweight Kit stand is an excellent medium to heavy sized stand with good support, height and stability – built to Matthews high standards! Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the use of heavier fixtures. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

Matthews 40" C-Stand W/Sliding Leg, Includes Grip Head & Arm - Black

Matthews Hollywood 40" Double Riser Sliding Leg, w/ Grip Head and Arm — Black, MD-B756040 (MD_B756040, MD/B756040, MD B756040, B756040) One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm. Available in Black Finish. Universally seen as the best C-Stand, Griphead and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world.  Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient, safe tightening with little effort. Comes with our Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an additional Grip Head for positioning.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

Matthews B377701 Mini Max

Matthews B377701 (B 377701 B-377701 B/377701) Mini Max Mini Max has a maximum operating arc of 105" (265cm) reaching a Maximum Height of 16' (489cm) to 3' (92cm) below ground level. MINI MAX also features 3 Rocky Mountain Legs for non-level terrain. Mini Max is the smaller compact version of our very successful and very popular MAX. Like its larger counterpart, Mini Max allows you to hang a fixture in places where no other lighting support system may go - either into a corner or flush to the wall - as there are neither rear rails nor pipes required for counterbalance. When the POV will not accommodate a stand or fixture placement, MINI MAX can 'fly' right in, making it possible to strategically place either a Key Light, Top Light or Back Light. Mini Max can support a 20lb (9.1kg) fixture 9ft (274cm) high on a 9ft (274cm) horizontal extension. Mini Max will operate on a 105" (265cm) maximum arc from 16ft (489cm) high to 3ft (92cm) below horizontal. Mini Max has a maximum operating arc of 105" (265cm) reaching a Maximum Height of 16' (489cm) to 3' (92cm) below ground level. Maximum Horizontal Extension is 9' (274cm) Mini Max features 3 Rocky Mountain Legs for non-level terrain, stairs or curbsides without the need for Apple Boxes.  

Matthews 350598 MiniGrip Mounting Kit

MATTHEWS 350598 MiniGrip Mounting Kit MINIGRIP is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. MINIGRIP - A whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands...the MINIGRIP kit consists of four lightweight 2" MiniGrip Heads with 3/8" and 5/8" mounting holes...two new Mini-Matthellini Clamps...which are half as large as the regular Matthellini but with just as many uses and two 20" arms. The MINIGRIP kit can be used with camera attachments and other accessories as well as lighting equipment. These miniature tools are ideal for tabletop photography, car interiors, and otherwise confined areas. The high impact composite material used in the manufacturing of these products is very strong, yet extremely light making them ideal for supporting camera accessories. It packs up into its own carrying bag. Patent Pending.

Matthews 20" c-Stand W/Sliding Leg, Includes Grip Head & Arm - Chrome

Matthews 20" c-Stand W/Sliding Leg, Includes Grip Head & Arm - Chrome(MD-756020) The term 'Century Stand' goes back to the early days of motion picture production. Before there was artificial lighting the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes but it seems the most popular was the 100 inch, or 'century', sized reflector. In later years, studios, grips and gaffers began to manufacture the earliest versions of what we now call C-Stands. The original C-Stands had welded bases that did not fold up or adjust but the fact that they easily nested together made them invaluable on the stage. Century Stands, or 'C' stands, are an important component in the image maker's arsenal of tools. These popular stands are available in many different configurations, lengths and finishes. The unique staggered leg design allows C-Stands to be nested and therefore be placed extremely close to one another on set. The lower leg can also be slid under many objects. The C+ offers a removable base for the risers, making disassembly for travel simple and easy without being cumbersome or having the awkwardness typical of other manufacturers. The sliding leg allows for use on stairs, off curbs and even as high as a desk or countertop. Patents applied for and pending. Fast, easy opening and closing.