Hague D5T Camera Tripod Tracking Dolly Kit

Hague D5T Camera Tripod Tracking Dolly Kit(HAG-D5T) The Hague D5T Tripod Tracking Dolly Kit is a quick and easy to use system that has been designed to create super smooth tracking shots with your own tripod. The dolly has two sets of locating holes for the tripod legs which means the tripod can be used in both high and low positions. It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. As a result the track does not require additional supports going between the two sides of track which makes it quicker to set-up and also allows the dolly to pull the track into place which makes it run smoother. The D5T Tripod Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through the majority of doorways and it has its own levelling system which prevents any rocking should the track be on slightly uneven ground. It runs on 40mm diameter track and is supplied with eight 1.5m lengths which provides a 6m run. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader and 3 straps are supplied for securing your tripod to the dolly.

Hague AMP4 Highshot Camera Mast With Manual Pan & Tilt

Hague AMP4 (A_M_P4, amp4, amp_4, amp/4) Highshot Camera Mast With Manual Pan & Tilt The Hague Highshot Camera Mast with manual pan & tilt capability is ideal for both photography and filming applications, including property photography, sports filming and sports analysis. Supplied in a padded transit bag for easy transportation. Hague Camera Supports have been a leading solutions expert in Aerial Mast Photography and Filming for many years, supplying kits into universities, professional sport teams, estate agencies and sport analysis companies around the world. The new range of Hague Highshot kits are an extension to the current range and offer the flexibility and performance required for professional use. The 6.2m (20ft 4”) Hague Highshot Mast provides an elevated view, with the ability to manually pan and tilt the camera. It’s ideal for compact cameras and small camcorders. Most modern cameras now have WiFi and Bluetooth capability so the camera can be controlled by an app on your phone or tablet which can be mounted at the base of the mast, or a cable can be run down the mast for monitoring and camera control. The Highshot mast is supplied with cable cleats should you be running cables down from the camera. The telescopic mast is lightweight and quick to set up, it has a minimum height of 158cm and a maximum height of 620cm. It is supplied with a tilt head which has a quick release camera plate, making it easy to mount the camera. At the base of the mast a handle is attached to pan the mast with a control cable to tilt the camera. Next to the pan bar there is a mounting plate with both 1/4” and 3/8” threaded holes for attaching an articulating arm, plus a 5/8” (16mm) socket which is used to attach the supplied Hague Ball Levelling Head. The ball levelling head has a standard 1/4" camera screw on top which allows you to mount a viewing monitor directly or a phone/tablet when used with a relevant phone/tablet mount. Supplied in a padded transit bag. Applications   Indoor or outdoor, the mast gives you that extra height compared to a traditional tripod that may not be high enough. Compared with the traditional view the result is completely different and the image is greatly improved when taken from a higher view point.

Hague AMP Highshot Mast - 7.3M

Hague AMP (A_M_P, amp, a_m_p, a/mp) Highshot Mast - 7.3M The Hague AMP Highshot Camera Mast is a lightweight system that extends to a height of 7.3m (24ft) and is ideal for a variety of applications including aerial mast photography, sports analysis, site surveys and sports filming. Supplied in a padded transit bag. Made from lightweight aluminium this mast is extremely portable, quick to set-up and easy to use. With its own tripod style base, which remains attached at all times and just folds up for transport, the mast provides a rigid base and each section of the mast can be raised easily by hand. At the top of the mast there is a standard 1/4” screw attachment to which you would usually attach a ball head, tilt head or powerhead so the camera can then be positioned to the desired angle. Once the camera is in position you can then use a tablet or viewing monitor to see and control your images. Operating from a higher view point drastically changes the picture you can capture and these masts can be utilised outdoors or indoors depending upon the application they are needed for. The mast now has three adjustable legs for levelling off, a supplied spirit level and there is an attachment at the top to secure guide ropes if required. With this mast, you can build your own bespoke solution utilising the related products below or just use the mast by itself. Take your filming/photography capability to new heights with the AMP Camera Mast from the UK’s leading solutions expert. This AMP kit includes the Hague AMP Highshot Camera Mast supplied in a padded transit bag.

Hague D9 Camera Table Tracking Dolly

Hague D9 (D 9, D-9, D/9, d9) Camera Table Tracking Dolly The Hague D9 Table Dolly enables you get tracking shots on a table, board or any smooth surface. The high quality 80mm diameter wheels have twin sealed radial ball bearings, which make the table dolly easy and quiet to move. The dolly will track in a straight line or it can be set to track in an arc, to go round an item. On top of the dolly is a 75mm bowl, this enables you to transfer your “75mm bowl type” video head from your tripod onto the dolly and level it off on the bowl mount. You then have the facility to be able to both pan and tilt whilst tracking the dolly. The large footprint of the dolly prevents tipping or slipping when using the video head. It's ideal for both DSLRs and camcorders. An articulated arm, for a monitor or other accessory, can be fastened to the dolly using one of the table dollies 1/4” or 3/8” threaded mounting points. Includes D9 Table Dolly. The price does not include the video head, camera, monitor or any other accessories shown.  

Hague D10 Camera Skater Ladder Dolly

Hague D10 (D-10, D 10, D/10, d10) Camera Skater Ladder Dolly The Hague dual purpose Skater Ladder Dolly runs on any smooth, flat surface and the wheels can be set to track in a straight line or angled to track round an object.  The Hague Skater Ladder Dolly also runs on a ladder to create tracking shots over any terrain. The high quality wheels have sealed radial ball bearings to ensure super smooth movement. Your video head can easily attach to the dolly as it has a 75mm bowl mount. This means you can simply remove the head from your tripod and mount it on the dolly, with the facility to level off the head. The 75mm bowl levelling system has now become the most popular on the majority of professional tripods. When the dolly is mounted onto a ladder an extra set of guide wheels are used to prevent it from coming off the ladder and the dolly’s width is adjustable to accommodate the different widths of ladder.   A ladder makes an ideal track as it can just be laid on the ground for low shots or suspended above ground for higher shots or to go over an item. This enables you to get tracking shots over any terrain. Optional ladder supports are available to suspend the ladder between two tripods or to level off the ladder when used on the ground. A track kit is also available, with the advantage of the track breaking down to shorter lengths for easier transportation.

Hague Tripod Tracking Dolly (Inc Track)

D5T - Hague Tripod Tracking Dolly Kit The Hague D5T Tripod Tracking Dolly has two sets of locating holes for the tripod legs, which means the tripod can be used in both high and low positions. It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. The Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through doorways, it has its own levelling system which prevents any rocking should the track be on uneven ground. It runs on inexpensive 40mm dia. PVC pipe which can be supplied or is available from DIY stores. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader, 3 straps are supplied for securing your tripod to the dolly and also supplied are 2 track connectors for joining your track.