Libec ALX-SR4 15.5 Inch Slider Rail

Libec ALX-SR4 (ALX SR4, ALX/SR4, ALX_SR4, alx-sr4) 15.5 Inch Slider Rail Add versatility to your ALX slider with the ALX SR4 Slider Rail from Libec. Measuring 15.5" in length, the rail can be used with your ALX S8 or ALX S12 slider in place of the included rail, allowing you to conveniently switch between shorter or longer rail lengths to adapt to the shooting environment. The 15.5" rail provides a sliding range of 12", and supports loads weighing up to 33 lb. To switch between rail length, simply detach the sliding platform and other components using the leg lock knobs, and then attach them to the new length of rail.

Libec ALX-S12 43.5 Inch Slider with Case, 33lbs Payload

Libec ALX-S12 (ALX/S12, ALX_S12, ALX S12, alx-s12) 43.5 Inch Slider with Case, 33lbs Payload The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail. At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.

Libec ALX-S4 12 Inch Slider with Case, 33lbs Payload

Libec ALX-S4 (ALX/S4, ALX_S4, ALX S4, alx-s4) 12 Inch Slider with Case, 33lbs Payload The Libec ALX S4 is a 15.5" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail. At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 15.5" rail for separately available 32.6" or 47" rail lengths.

Libec ALX-S8 28 Inch Slider with Case, 33lbs Payload

Libec ALX-S8 (ALX/S8, ALX/S8, ALX S8, alx-s8) Inch Slider with Case, 33lbs Payload The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail. At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.