Hague DRIVE Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

Hague DRIVE Camslide Drive Carbon Fibre Camera Slider With Auto Pan System The Hague Camslide Drive carbon fibre camera slider will automatically pan the camera whilst you concentrate on the sliding. This ingenious design makes it so much easier to pan and slide at the same time as you only have to concentrate on the one movement. Made from lightweight carbon fibre the Hague Camslide Drive has a smooth design and provides a smooth slider movement too. Measuring 80cm in legth it is an ideal length for working with but also a good size for travelling with. Supplied with its own transit bag the Camslide Drive is an ideal camera slider for many situations. So what’s so special about the Camslide Drive? Well it’s the peculiar looking bar down the centre that makes all the difference. This is the unique drive capability which allows the user to set the slider so it auto pans the camera as you slide along the rail. With a variety of adjustment, you can create both small movements or wide ranging pans as the camera moves along. To operate the Drive system simply adjust the angle of the centre rail and then, as the carriage moves along the rail, it will automatically pan the direction of you camera on the ball head or video head. Please note we would not recommend trying to tilt the camera at the same time as using the auto pan mode but you can set the ball head or video head at a tilted angle. The carriage has a larger seating area which makes it ideal for mounting ball heads or video heads and it incorporates 4 roller bearings for a smooth slider movement. The carriage has a 1/4" screw and a 3/8” adaptor which makes it ideal for mounting ball heads and video heads. There is also a spirit level included within the carriage. The rail is made from lightweight carbon fibre rods and the 80cm length is a very good working length but is not too big for transit. The new style end supports are supplied with adjustable feet which fold up to make the slider compact for travelling and can be used at different angles when on slightly uneven ground. The slider has a mounting plate which allows it to be mounted onto a tripod via both the 1/4” and 3/8” camera screws.   Supplied with its own travel bag the Hague Camslide Drive carbon fibre slider is a lightweight system which is ideal for professional camera set-ups that weigh less than 8kg.

Hague EDGE Camslide Edge Carbon Fibre Camera Slider

Hague EDGE Camslide Edge Carbon Fibre Camera Slider The Hague Camslide Edge camera slider is made from lightweight carbon fibre and provides a smooth sliding movement for professional tracking shots. Measuring 80cm in length the Camslide Edge offers a very workable length and can be used on the ground, a table or tripod mounted. The Camslide Edge has a heavy duty carriage which incorporates 6 roller bearings to ensure a smooth movement with little play and there is a breaking system that can be used to add drag or to lock off the carriage. The larger seating area of the carriage is ideal for getting cameras better balanced on ball heads and video heads. The carriage has a 1/4" screw and a 3/8” adaptor which makes it ideal for mounting ball heads and video heads. There is also a spirit level included within the carriage. The rail is made from lightweight carbon fibre rods and the 80cm length is a very good working length but is not too big for transit. The new style end supports are supplied with adjustable feet which fold up to make the slider compact for travelling and can be used at different angles when on slightly uneven ground. The slider has a mounting plate which allows it to be mounted onto a tripod via both the 1/4” and 3/8” camera screws.   Supplied with its own travel bag the Hague Camslide Edge is a lightweight camera slider which is ideal for professional camera set-ups that weigh less than 8kg.

Hague S600 Camslide Camera Slider

Hague S600 Camslide Camera Slider The Hague S600 Camslide is a high quality camera slider designed to offer a low cost solution for smooth slider shots. It is an ideal solution for camera set-ups that weigh up to 4kg (8.8lbs). The S600 Camslide has a lightweight aluminium rail, high quality roller bearings, adjustable end supports and is supplied in a padded transit bag.  Hague Camera Supports were one of the first companies to ever design a camera slider and the new Camslide S600 honours that history with a traditional style rail, combined with modern day enhancements in performance.   The Hague Camslide has been re-designed to offer unparalleled performance in such a low cost solution. With the introduction of adjustable end supports and high quality roller bearings the S600 allows you to create smooth slider shots from a compact and lightweight system. The new carriage has been carefully constructed with the introduction of the high quality roller bearings, a carriage lock and a spirit level. There is a standard 3/8" screw, to which you attach either a ball head or a video head, and the camera can then be positioned to the desired angle for your shot. At each end the adjustable end supports allow the slider to be levelled across a variety of terrains and these fold up neatly for transit, or when used on a tripod.   The rail itself has standard 1/4" and 3/8" threaded holes in the centre so it can be attached to a single tripod but it also has additional 1/4" and 3/8" holes at both ends should there be a requirement to mount it across two tripods. Within the end supports, and the carriage, there are also additional threaded holes to which accessories could be attached.

Hague Track Extension Kit

Hague TKE (TK-E, TK/E, TK_E, TK E) Track Extension Kit The Hague TKE Track Kit Extension is designed to extend the Hague TK Track Kit. It consists of two additional pieces of track and a mid rail support. These are then used in conjunction with the standard track kit to extend the length by 900mm. The standard track kit end supports are used at each end and the additional extension bars are used in the centre with the rail support. The Hague TK Track Kit is designed for the Hague Skater Ladder Dolly and enables you to get tracking shots over any terrain.

Hague Tracker

D7 - Hague Tracker The Hague D7 Tracker is quick and easy to set up, has a telescopic column, swivel seat and comes with a 6 metre run of track. This sit on tracking dolly provides smooth tracking shots. The Hague D7 Tracker is a ride on tracking system that is quick and simple to set up and it enables you to create super smooth tracking shots on location or in the studio. An aluminium frame forms the base of the ride on tracking dolly and attached to this is a telescopic column with a 100mm bowl onto which you can fasten your video head. The Hague range of Jibs can also be attached to this column. At the base of the column is a swivel seat, which allows you to move around the column when panning. The width of the dolly has been set to allow it to go through doorways. It runs on 50mm diameter track which is held in position by the 8 radial ball bearing wheels which make the dolly easy to move along the track using the handle supplied. A unique levelling system prevents any rocking should the track be laid on uneven ground.