Matthews Dutti Dolly Grenade

Dutti Dolly Grenade - 395420K Designed to join 5/8” baby pins and 1-1/4” pipe  (1.75” OD). The caps allows speed rail couplers to rotate safely when quick repositioning is needed.

Matthews Stainless Steel Track 4'

Stainless Steel Track 4' - 397070 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members. CAUTION: Matthews does not recommend that the two types of track be used together. The chrome plating used on the Heavy Wall can create size buildup and the finished diameter may be slightly larger. This can create a noticeable "bump" at the joint. Matthews curved tracks are available to complete 10' and 20' diameter circles. Be advised that most dollies will not navigate the 10' circle without the addition of a multi-wheeled device such as the Matthews Centipede #395200. Four pieces of 90-degree curve track are needed to complete a circle. Eight pieces are required for 20' diameter circle. All Matthews Dolly Track is rated to a maximum payload of 1200 Lbs (545kg) at the industry standard of 24.5" center to center track width.

Matthews Stainless Steel Track, 90 Degree Curve

Stainless Steel Track, 90 Degree Curve - 397080 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members. CAUTION: Matthews does not recommend that the two types of track be used together. The chrome plating used on the Heavy Wall can create size buildup and the finished diameter may be slightly larger. This can create a noticeable "bump" at the joint. Matthews curved tracks are available to complete 10' and 20' diameter circles. Be advised that most dollies will not navigate the 10' circle without the addition of a multi-wheeled device such as the Matthews Centipede #395200. Four pieces of 90-degree curve track are needed to complete a circle. Eight pieces are required for 20' diameter circle. All Matthews Dolly Track is rated to a maximum payload of 1200 Lbs (545kg) at the industry standard of 24.5" center to center track width.

Matthews Stainless Steel 8' Curved Track 20' DIA

Stainless Steel 8' Curved Track 20' DIA - 397059 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members. CAUTION: Matthews does not recommend that the two types of track be used together. The chrome plating used on the Heavy Wall can create size buildup and the finished diameter may be slightly larger. This can create a noticeable "bump" at the joint. Matthews curved tracks are available to complete 10' and 20' diameter circles. Be advised that most dollies will not navigate the 10' circle without the addition of a multi-wheeled device such as the Matthews Centipede #395200. Four pieces of 90-degree curve track are needed to complete a circle. Eight pieces are required for 20' diameter circle. All Matthews Dolly Track is rated to a maximum payload of 1200 Lbs (545kg) at the industry standard of 24.5" center to center track width.

Matthews - Round-d-Round Dolly

Matthews - Round-d-Round Dolly - 395300 The new Round-d-Round Doorway Dolly from Matthews is the next generation in Doorway Dolly development. Based on the industry proven designed and engineered Matthews Doorway Dolly, the new Round-d-Round model offers all-wheel steering which allows for greater turning flexibility and will turn in a tight 6 foot (2 meter) circle. The camera operator seat will mount in six different fixed locations. Steering from both ends of the dolly will allow unlimited camera positioning as the dolly rolls on track with either Hot Buttons or the Matthews Centipede or on the ground with the standard pneumatic rubber tires. Load capacity is over 1100 pounds (500kg) and the platform is carpeted for a non-slip, low-maintenance surface.

Matthews Dutti Dolly Rental Kit (Back)

Matthews Dutti Dolly Rental Kit (Black) B395400K The Dutti Dolly is a simple but elegant design that is expanding the versatility of the common dolly shot. Born on-set, it has evolved directly from the demands of cinematographers to either get low or move in tight spaces without sacrificing stability. James Saldutti, a Dolly Grip known as ‘Dutti’ in the Hollywood community, began developing this dolly nearly 15 years ago. Since that time, the Dutti Dolly has been used on hundreds of feature films, television shows and commercials. Through a partnership with Matthews, the Dutti Dolly is now commercially available. The design has been refined with a sturdy 1/2″ thick rectangular CNC’d aluminum platform and a built-in Mitchell mount. Measuring 20” x 24”, it rolls extremely low to the ground at just under 2” in height while remaining incredibly stable whether riding directly on smooth surfaces, or on rails. Its 8 inline skate wheels and universal stand brackets allow it ride smoothly on speed rail or on tubing found in a local hardware store such as round, square, angle or PVC. It’s perfect for smaller or traveling productions where fast set-ups are required and equipment is limited. Despite its small size, Dutti Dolly remains incredibly stable and adaptable. It can be mounted on the ground, on stands or apple boxes, over or underslung without the wobble seen on other small dollies. The compact footprint is easy to set-up and transport, yet large and durable enough for standing or sitting applications, and is compatible with mounting tripods, bazookas, tilt plates and other accessories. There is no other dolly in the world like it. The Dutti Dolly Rental Kit was assembled based on the feedback of numerous Key Grips and rental houses to provide everything needed for daily on-set requirements. Purchasing the kit saves hundreds over the cost of buying each component individually.

Matthews - Dutti Dolly

Matthews - Dutti Dolly - 395400 The Dutti Dolly is a simple but elegant design that is expanding the versatility of the common dolly shot. Born on-set, it has evolved directly from the demands of cinematographers to either get low or move in tight spaces without sacrificing stability. James Saldutti, a Dolly Grip known as ‘Dutti’ in the Hollywood community, began developing this dolly nearly 15 years ago. Since that time, the Dutti Dolly has been used on hundreds of feature films, television shows and commercials. Through a partnership with Matthews, the Dutti Dolly is now commercially available. The design has been refined with a sturdy 1/2″ thick rectangular CNC’d aluminum platform and a built-in Mitchell mount. Measuring 20” x 24”, it rolls extremely low to the ground at just under 2” in height while remaining incredibly stable whether riding directly on smooth surfaces, or on rails. Its 8 inline skate wheels and universal stand brackets allow it ride smoothly on speed rail or on tubing found in a local hardware store such as round, square, angle or PVC. It’s perfect for smaller or traveling productions where fast set-ups are required and equipment is limited. Despite its small size, Dutti Dolly remains incredibly stable and adaptable. It can be mounted on the ground, on stands or apple boxes, over or underslung without the wobble seen on other small dollies. The compact footprint is easy to set-up and transport, yet large and durable enough for standing or sitting applications, and is compatible with mounting tripods, bazookas, tilt plates and other accessories. There is no other dolly in the world like it.

Matthews - 75mm Bowl Adapters

Matthews - 75mm Bowl Adapters - 395411