Manfrotto C337 Quick Action Junior Clamp with T-Knob

Manfrotto C337 (MAN-C337, MAN/C337, MAN_C337, MANC337, man_c337) Quick Action Junior Clamp with T-Knob The Avenger C337 Quick Action Junior Clamp with 28mm Receiver is the perfect partner for lights with a 28mm Junior Spigot and 28mm pins. Designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the rubber covered T-Handle. Made in gravity cast aluminium, this clamp is ideal to hang all types of lights and luminaires in TV studios and theatres. Its incredible ''coupling range'' means it can clamp onto most industry standard pipe diameters (Pipes ranging from 40-70mm). To meet all safety requirements, the Avenger C337 has been designed with a dedicated slot for flexible steel safety cables, has a built in safety pin to secure the load or adapters mounted into this clamp. T-Top rubber T-Handle cover included to improve grip. This clamp is TÜV certified. Recommended Accessories: E200, C155, D400, C626

Manfrotto B9000P Rubber Filled Wheel Set For Strato Safe

Manfrotto B9000P (MAN-B9000P, MAN/B9000P, MAN_B9000P, MANB9000P, man_b9000p) Rubber Filled Wheel Set For Strato Safe Set of 3 Rubber Filled for strato safe stands. Supplied with double brake mechanism that can lock wheels and pivot separately. Pivoting mechanism has 12 locking positions

Manfrotto B9000 Hard Wheel Set For Strato Safe

Manfrotto B9000 (MAN-B9000, MAN/B9000, MAN_B9000, MANB9000, man_b9000) Hard Wheel Set For Strato Safe Set of three wheels for Strato Safe Stands, it is supplied with double-brake mechanism that can lock wheel and pivot separately.

Manfrotto B70XXFFW Foam Fill Wheels For Long John Silver

Manfrotto B70XXFFW (MAN-B70XXFFW, MAN/B70XXFFW, MAN_B70XXFFW, MANB70XXFFW, b70xxffw) Foam Fill Wheels For Long John Silver Set of 3 foam fill wheels for use with the Long John Silver and Strato Safe Stand. Providing a smooth movement on a variety of surface types.

Manfrotto 699 Safety Collar 40mm

Manfrotto 699 (MAN-699, MAN/699, MAN_699, MAN699, man_699) Safety Collar 40mm Secondary safety system for all speaker stands. When locked into position, it stops upper stand sections from dropping when you open the stand locking knob.

Manfrotto 649 Quick-Release Clamp

Manfrotto 649 (MAN-649, MAN/649, MAN_649, MAN649, MAN 649, man_649) Quick-Release Clamp Different from the other versions that are used mainly on round pipes, this version will also work on square and rectangular tubes. Extremely light, with a good ''coupling range'', this version also offers an incredible number of attachment sizes. Ideal for photographic applications and dedicated accessories. Pipe size 5-80mm.

Manfrotto MAN-MSQ6T Top Lock Travel Quick Release Adaptor

Manfrotto MAN-MSQ6T (MAN/MSQ6T, MAN_MSQ6T, MSQ6T, MSQ-6T, msq6t) Top Lock Travel Quick Release Adaptor The Top Lock Travel Quick Release Adaptor allows you to fix your Arca-type plate to the Manfrotto Befree 494 or 496 heads. It is the first Arca-Swiss adaptor by Manfrotto compact enough to be fully compatible with the Manfrotto Befree travel tripod range, whose legs fold perfectly around the head and Top Lock Travel Adaptor. Made of lightweight aluminium, the adaptor has a two-axis spirit level to facilitate precise framing and help capture level images in-camera, ensuring the camera's full frame is used and reducing post-production time. The adaptor features an ergonomic side knob that locks the plate and keeps it safely in place while you shoot. The knob is secured to the plate-holder thanks to a mechanism that stops it at its maximum opening. The Q6 Arca-compatible plate is not included with the adaptor. Spare plates can be purchased separately. INSTRUCTIONS: To mount the MSQ6T Adaptor onto your Befree tripod head, simply unscrew the plate-holder of the head with the provided Allen key, replace it with the MSQ6T and use your own screw to fix the adaptor to the head. Compatible with: MH490BH - MH494 - MH494-BH - MH496-BH - 494RC2 - 496RC2- 498RC2 -498RC4 If you own a Befree tripod, please, remove the plate and check the head model on the plate-holder.

Manfrotto MAN-565 Rubber Shoe For Spiked Feet

Manfrotto MAN-565 (MAN/565, MAN_565, 565, man-565) Rubber Shoe For Spiked Feet The Manfrotto 565 Rubber Shoes is a set of three spike foot shoes. Snap these shoes onto your tripod when its not possible to use the dual spiked feet, the design makes them ideal on slippery or glossy floors. Fits the 3141, 3181, 3185, 3190, 3283 and 540ART spiked tripods.

Manfrotto Levelling Centre Column For 190 Series

Manfrotto MAN-190LC (MAN/190LC, MAN_190LC, MAN190LC) Levelling Centre Column For 190 Series The new Levelling Column allows quick levelling of photo or video heads without the need for time-consuming adjustments to the length and angle of each single tripod leg.  Thanks to the levelling half ball mounted at the top of the tripod’s centre column, the top plate angle is now independent from the rest of the tripod. The half ball is locked and unlocked via a turning grip on the bottom of the centre column. The half ball-mounted plate has a 3/8'' male screw for attachment to a photo or video head, and a bubble spirit level for even easier use.

Manfrotto Levelling Centre Column For 055 Series

Manfrotto MAN-055LC (MAN/055LC, MAN_055LC, MAN 055LC) Levelling Centre Column For 055 Series The new Levelling Column allows quick levelling of photo or video heads without the need for time-consuming adjustments to the length and angle of each single tripod leg.  Thanks to the levelling half ball mounted at the top of the tripod’s centre column, the top plate angle is now independent from the rest of the tripod. The half ball is locked and unlocked via a turning grip on the bottom of the centre column. The half ball-mounted plate has a 3/8'' male screw for attachment to a photo or video head, and a bubble spirit level for even easier use.

Manfrotto Levelling Centre Column For 190 Pro

Manfrotto MAN-556B (MAN556B, MAN/556B, MAN 556B, MAN_556B) Levelling Centre Column For 190 Pro Manfrotto's innovative system means you can quickly level your photo or video head without needing to make time-consuming adjustments to the length and angle of each single tripod leg. One of the most common problems in still photography and, above all, video has been resolved by Manfrotto, thanks to the use of a 50mm diameter levelling half ball mounted at the top of a tripod centre column so as to make the angle of the top plate independent of the rest of the tripod. Locking and unlocking of the half ball is via a turning grip on the bottom of the centre column, which can be removed during fitting of the column to your existing tripod. The half ball-mounted plate has a male 3/8" screw for attachment to a photo or video head, and a bubble spirit level for added ease of use.

Manfrotto Levelling Center Column For 055 pro

Manfrotto MAN-555B (MAN/555B, MAN555B, MAN_555B) Levelling Center Column For 055 pro Manfrotto's innovative system means you can quickly level your photo or video head without needing to make time-consuming adjustments to the length and angle of each single tripod leg. One of the most common problems in still photography and, above all, video has been resolved by Manfrotto, thanks to the use of a 50mm diameter levelling half ball mounted at the top of a tripod centre column so as to make the angle of the top plate independent of the rest of the tripod. Locking and unlocking of the half ball is via a turning grip on the bottom of the centre column, which can be removed during fitting of the column to your existing tripod. The half ball-mounted plate has a male 3/8" screw for attachment to a photo or video head, and a bubble spirit level for added ease of use.

Manfrotto MAN-553 Levelling Adapter for Columns in Horizontal Position

Manfrotto MAN-553 (MAN/553, MAN_553, 553, man_553) Levelling Adapter for Columns in Horizontal Position Working with the centre column in the horizontal position on Manfrotto tripod models MDEVE tripod family has always caused a slight difficulty, in that the head remains at 90° to the ground making it more difficult to position the camera correctly for shooting. Now this simple but had the most stable platform possible for filming, and that we could use ever-lighter materials, from aluminum to carbon fibre, to keep equipment weight to the bare minimum. Single tube leg profile made of round-section aluminum or carbon fibre.

Manfrotto Levelling Base

Manfrotto MAN-338 (MAN/338, MAN_338, MAN 338) Levelling Base The 338 is fitted between tripod and head and is used in combination with tripods that don’t have built-in levelling mechanisms. Its three adjustment dials enable the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level. The dials also have locking rings to ensure stability once the right position is reached. A spirit level is built in for reference. The base has a 3/8” female tripod fitting and a 3/8” male head fitting.

Manfrotto MAN-577 Quick Release Adapter with Sliding Plate and Safety Lock

Manfrotto MAN-577 (MAN/577, MAN577, MAN 577, MAN_577) Quick Release Adapter with Sliding Plate and Safety Lock The clever, and innovative camera adapter. Getting the perfect shot, reaching every angle, and never missing an opportunity to capture the moment couldn’t be easier with the Quick Release Adapter with Sliding Plate and Safety Lock. It’s designed to give you full range of movement with just a few easy actions, making it an absolute must-have for keen amateurs or professionals looking for the ultimate adapter for every situation. Great features include its lightweight, aluminium body. In fact, the nifty adapter only weighs 280g, which gives you the flexibility to pop it in your bag wherever your journey takes you, without being weighed down. When it comes to setting up and using this adapter, it’s completely hassle-free, and ultra-practical. It’s made to make your life even easier, by allowing you to switch from one support to the next, with taking your camera off the camera plate. This clever move means you can work fast and safe. To add to its great usability, this adapter even has an inbuilt safety lock. That way, you can be sure your gear’s securely in place as you switch supports mid-shoot. Add to this a clever quick release function, and you’ll never be stuck fiddling to change positions while you’re working again. This practical and versatile adapter can also be paired with a variety of cameras and accessory plates depending on what you need on the day. Plus, it comes complete with standard 6.4mm and 9.5mm camera screws, so you’ll have everything you need in one convenient package.

Manfrotto D520 40'' Extension Grip Arm

Manfrotto D520 (MAN-D520, MAN/D520, MAN_D520, MAND520, d520) 40'' Extension Grip Arm This chrome-plated steel arm is normally used on stands in combination with a grip head (D200) and it provides an extended grip point for scrims and flags or small lights. The pipe length is 102cm. Also available in black.

Manfrotto D200 Grip Head 2 1/2''

Manfrotto D200 (MAN-D200, MAN/D200, MAN_D200, MAND200, man_d200) Grip Head 2 1/2'' Avenger's most popular grip accessory. The D200 grip head has hundreds of functions. Unlike any other grip head, the D200 utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security. Connect it with additional E600 snap-in pin or E600C steel version to attach it to the original Super Clamp.

Manfrotto Accessory Arm For 4 Heads

Manfrotto 131DDB Accessory Arm For 4 Heads Mounts on any column with 3/8'' thread, this side arm allows positioning of two heads on a 90 degree perpendicular angle. Two positional head mounts on the side arm allowing the possible mounting of four heads.SPECIFICATIONSMETRICIMPERIAL     attaches by.    3/8'' screw attachment type     attachment    3/8" female thread attachment type    attachment (bottom)    4 number    Color    black color     column travel    30.7 cm     length    60.0 cm     material    aluminum    weight    1.1 kg