Manfrotto C337 Quick Action Junior Clamp with T-Knob

Manfrotto C337 (MAN-C337, MAN/C337, MAN_C337, MANC337, man_c337) Quick Action Junior Clamp with T-Knob The Avenger C337 Quick Action Junior Clamp with 28mm Receiver is the perfect partner for lights with a 28mm Junior Spigot and 28mm pins. Designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the rubber covered T-Handle. Made in gravity cast aluminium, this clamp is ideal to hang all types of lights and luminaires in TV studios and theatres. Its incredible ''coupling range'' means it can clamp onto most industry standard pipe diameters (Pipes ranging from 40-70mm). To meet all safety requirements, the Avenger C337 has been designed with a dedicated slot for flexible steel safety cables, has a built in safety pin to secure the load or adapters mounted into this clamp. T-Top rubber T-Handle cover included to improve grip. This clamp is TÜV certified. Recommended Accessories: E200, C155, D400, C626

Vocas 0390-0159 Canon EOS C100/200/300/500 Extender Cable

Vacas 0390-0159 (03900159, 0390/0159, 0390 0159, 0159) Canon EOS C100/200/300/500 Extender Cable. Extender cable for Canon EOS C100/200/300/500 extender with a length of 35 cm.

Hawk-Woods VLM-FX9 V-Lok Camera mount 2x D-TAP for Sony FX9

Hawk-Woods VLM-FX9 - Sony FX9 V-Lok Camera mount 2x D-TAP  The VLM-FX9 is a direct V-Lok fitting for Sony's FX9 camera allowing the user to use higher powered V-Lok batteries rather than BPU batteries which are the standard battery for the FX9 camera.   The adaptor attaches via the lock in mechanism in the FX9's battery compartment and then finally screwed to the top of the camera body to secure in place.   Users have the benefit of 2x Power-con (D-Tap) outputs 11 - 17 volts allowing further equipment/accessories to be powered. 1x 5V 2A USB is also available for powering or charging accessories such as mobile phones.   Power is provided via a short DC jack cable via the FX9's DC Input.   A low voltage warning LED is also situated at the top of the fitting, this is to combat the camera as it will only ever see the 19.5v in the viewfinder. So no warning would be given when the battery is low. The LED will flash at 11.5v, giving you a decent warning to make a change.

DL-10RB Dolly for Select Libec, Sachtler & Vinten Tripods

Libec DL-10RB (DL_10RB, DL/10RB, DL 10RB) Dolly for Select Libec, Sachtler & Vinten Tripods The DL-10RB Dolly from Libec is a foldable dolly for select Libec, Sachtler, and Vinten video tripods. It features a 242.5 lb payload, locking wheels, and an aluminum structure, along with an integrated carrying handle and detachable cable guards.

Libec SP-15B Ground Spreader for T150B & T150C Tripods

Libec SP-15B (SP_15B, SP/15B, SP 15B) Ground Spreader for T150B & T150C Tripods The Libec SP-15B Ground Spreader is compatible with the Libec T150B and T150C tripods. The arms are individually length-adjustable when you loosen dedicated knobs, and a pull ring is provided in the center for collapsing the spreader.

Libec BA-150 150mm Bowl Adapter for P1000 Pedestal

Libec BA-150 (BA_150, BA/150, BA 150) 150mm Bowl Adapter for P1000 Pedestal The Libec 150mm Bowl Adapter for P1000 Pedestal is specifically designed to enable mounting a video head with a 150mm leveling ball onto your P1000 pedestal. You can mount the adapter onto virtually any flat base, including the P1000 pedestal or a tripod with a flat head mounting fitting using four mounting bolts (not included), provided the mounting holes line up. The 150mm bowl enables quick leveling with any Libec video head with a 150mm leveling ball, and may be compatible with third-party video heads. The anodized lightweight construction is designed to minimally impact the load capacity of the pedestal or tripod.

Libec KR-15 Kick Ring for P1000 Pedestal System

Libec KR-15 (KR_15, KR/15, KR 15) Kick Ring for P1000 Pedestal System The Kick Ring is an convenient optional accessory for the P1000 Pedestal. By pressing on the ring with your foot, the dolly’ s starting motion is greatly enhanced, resulting in a smoother and easier operability.

Libec BA-100 100mm Bowl Adapter for P1000 Pedestal

Libec BA-100 (BA_100, BA/100, BA 100) 100mm Bowl Adapter for P1000 Pedestal The Libec 100mm Bowl Adapter for P1000 Pedestal is specifically designed to enable mounting a video head with a 100mm leveling ball onto your P1000 pedestal. You can mount the adapter onto virtually any flat base, including the P1000 pedestal or a tripod with a flat head mounting fitting using four mounting bolts (not included), provided the mounting holes line up. The 100mm bowl enables quick leveling with any Libec video head with a 100mm leveling ball, and may be compatible with third-party video heads. The anodized lightweight construction is designed to minimally impact the load capacity of the pedestal or tripod.

Manfrotto Levelling Center Column For 055 pro

Manfrotto MAN-555B (MAN/555B, MAN555B, MAN_555B) Levelling Center Column For 055 pro Manfrotto's innovative system means you can quickly level your photo or video head without needing to make time-consuming adjustments to the length and angle of each single tripod leg. One of the most common problems in still photography and, above all, video has been resolved by Manfrotto, thanks to the use of a 50mm diameter levelling half ball mounted at the top of a tripod centre column so as to make the angle of the top plate independent of the rest of the tripod. Locking and unlocking of the half ball is via a turning grip on the bottom of the centre column, which can be removed during fitting of the column to your existing tripod. The half ball-mounted plate has a male 3/8" screw for attachment to a photo or video head, and a bubble spirit level for added ease of use.