Portkeys 7" 1000-nit Touchscreen Monitor with HDMI In/Out

Portkeys 7" 1000-nit Touchscreen Monitor with HDMI In/Out The Portkeys LH7C is a 7-inch monitor designed for content creators seeking a lightweight, rugged on-camera monitor that doesn’t compromise on advanced camera control for Sony, Canon, and Panasonic cameras. Extremely thin and weighing only 245g/8.6oz (without battery), the polycarbonate and ABS construction helps keep the weight low, fitting naturally into any rig without weighing down your setup. The 7.0″ FullHD touchscreen LCD offers 1,000 nits of brightness, making it daylight-viewable. Designed for modern workflows, the LH7C combines an HDMI video signal and wired camera control via a single cable using the TA03Y USB-C/HDMI adapter. This two-in-one solution simplifies cabling, reduces clutter, and improves reliability on set. To set up, simply connect the TA03Y cable to your camera’s HDMI and USB-C ports, then attach the other end to the monitor. Power the LH7C using either a Sony L-Series battery or an external DC input. Once powered and connected, the monitor will automatically recognize supported cameras. Within moments, you can adjust key camera settings such as ISO, aperture, shutter speed, white balance, autofocus, and trigger recording directly from the LH7C touchscreen, with intuitive on-screen controls making configuration smooth and fast. The LH7C supports the operation of various Sony, Canon, and Panasonic cameras. It is compatible with well-known models, including the Sony FX3/FX30, the A7S III/A7 IV/A7V/A9 III mirrorless cameras; the Canon EOS R1, R5 Mark II, R6 Mark III; and Panasonic S1/S1R and S5II/S5IIX, to name a few. The LH7C runs on MOVNORM OS, a fast and minimalist interface offering all the essential professional tools

Portkeys Wireless control SDL Monitor

Portkeys Wireless control SDL Monitor(PK-LS7P) The Portkeys LS7P is a rugged 7-inch on-camera monitor featuring 1,000 nits of brightness, HDMI/SDI video input and output ports, and wireless camera control capabilities. The Portkeys LS7P features a 7-inch touchscreen panel with a resolution of 1920 x 1080. With a maximum brightness of 1,000nits and a contrast ratio of 1000:1, this daylight-viewable monitor is usable in all shooting conditions, whether outdoors under bright sunlight or indoors in a murky studio. Trusting your on-camera monitor’s colors and image is essential for making creative decisions on set, which is why the LS7P features a 10-bit (8+2 FRC) panel, and every monitor is factory color-calibrated. With a weigh of only 409 grams (14.42 ounces) and measuring 176.2 x 103.8 x 39.3 mm (6.93 x 4.08 x 1.54 inches), this monitor is a compact and comfortable choice for camera operators and focus pullers. With a wide viewing angle of 80° from all sides, the display is easy to see, and it comes with two screen protectors to safeguard the touchscreen from accidental damage. The LS7P features one 4K DCI 30P/1080P60 HDMI input port and one 1080P60 HDMI output port, conveniently located on the bottom left side of the monitor. On the right-hand side of the monitor, you will find 3G-SDI 1080P60 video input and output ports. Additionally, cross-conversion from SDI input to HDMI output is possible, and the monitor supports 3D LUTs for both HDMI and SDI outputs.   At the top of the monitor, you will find four user-assignable buttons that allow you to activate or deactivate your favorite monitor tools quickly. Additionally, there is an on/off switch, a touchscreen lock switch, and a 1/4″-20 mounting point with locating pins. The LS7P also includes two more 1/4″-20 mounting points located on the bottom and right sides, providing filmmakers with multiple options for mounting the monitor. For future firmware updates and loading custom LUTs, a USB-A port is located at the bottom, along with a 3.5mm headphone jack. The Portkeys LS7P monitor can be powered using a single Sony NP-F battery. With a low power draw of just 13W, a single Sony NP-F970 battery can power the monitor for up to 3.5 hours. Additionally, the monitor features a DC 7-24V power input with a locking DC 5.5×2.1mm barrel connector. This allows you to extend the monitor’s usage time by powering it via a V-Mount or Gold Mount battery using the included D-TAP to screw-in DC power cable. Furthermore, the LS7P features a patented design that includes a built-in Sony NP-F power output dummy battery plate. This rotatable battery plate can be adjusted both horizontally and vertically. It also offers power pass-through capabilities (8V/10W), enabling you to connect and power a wireless video receiver directly at the back of the LS7P. This design allows for a sleek and minimalist setup.

Portkeys BM5WR 5.5" HDMI Touchscreen Monitor

Portkeys BM5WR 5.5" HDMI Touchscreen Monitor(PK-BM5WR) The BM5WR is PortKeys’ new 5.5-inch 1080P flagship field monitor. It has HDMI and SDI inputs, and an SDI output with cross-conversion. If you need to monitor the sound, there is a 3.5mm output jack on the left. There is a USB port on the bottom of the monitor for future firmware upgrades. For power, the BM5WR uses a single Sony NP-F battery. As with the SmallHD Focus monitor, you can use the BM5’s power output to power your camera from a virtual battery. Best of all, you have the option to power the monitor from an external battery using the Lemo port on the monitor and the included Lemo to D-Tap cable. The screen itself is a WLED panel, which is a marketing term for an LED panel, so the blacks should be nowhere near as good as an OLED panel. In terms of construction, the PortKeys BM5WR is made entirely of aluminum. In front of the screen, there is a piece of tempered glass to protect it from shocks. It only weighs 350 grams, which is relatively light for a sturdy field monitor. The BM5WR can be viewed in daylight with a brightness of up to 2200 nits and a viewing angle of 178°. To attach the BM5WR to your camera or gear, the display has a 1/4-inch hole on the bottom and one on the top. Additionally, “L-Brackets” such as SmallHD Focus are available as accessories to make it easier to mount the monitor to your camera. The BM5WR supports resolutions up to 1080p at 60 frames per second.   Finally, there are four function buttons at the top of the display along with a menu button and a scroll wheel for navigating through the menus.

Portkeys HD7T 4K HDMI Touch Screen Monitor

Portkeys HD7T (HD-7T, HD/7T, HD 7T, HD_7T) HD7T 4K HDMI Touch Screen Monitor The Portkeys HD7T stands out as a bright, feature-rich 7″ monitor with pro-grade connectivity and tools, housed in a durable build. It supports both HDMI and SDI workflows, provides extensive focus and exposure assistance, and offers flexible power options—all at a compelling price point. Excellent for both solo shooters and collaborative film crews. Display & Visuals Screen Size & Resolution: 7″ IPS display with 1920×1200 (WUXGA) resolution—a sharp, high-definition panel. Brightness: Up to 1200 nits, making it daylight-visible even in outdoor environments  Color & Contrast: 8-bit color support (~16.7 million colors) with a 1900:1 contrast ratio and wide 178° viewing angles  Aspect Ratio: Native 16:10, offering versatile framing for various formats. Connectivity Video I/O: HDMI (1.4) input & loop-through output supporting up to DCI 4K24 and UHD 4K30. 3G-SDI input & output for professional workflows  Audio: Embedded audio via HDMI/SDI. 3.5 mm headphone jack (audio monitoring only). Power & Firmware: Dual hot-swappable Sony L-series battery plates (NP-F). LEMO 4-pin DC input (7–24 V). USB-A port for 3D LUT upload and firmware updates  Monitoring Features Built-in Tools: Focus peaking, false color, histogram, zebra, check field, anamorphic de-squeeze, pixel-to-pixel zoom, overscan, selectable aspect guides, and more  LUT Support: Load custom 3D LUTs via USB alongside preset options. User Interface: Physical menu buttons and a dial for quick access—not touchscreen. Build & Mounting Construction: Rugged, heat-dissipating metal housing ensures on-set durability  Mounting: Features NATO rail and multiple 1/4"-20 threads for flexible rigging. Ultra-thin profile (1.6" / 4.1 cm thick) at just ~520 g  Power & Runtime Battery Life: Dual NP-F batteries for extended shoots; can power compatible cameras via DC out using a dummy battery. Power Efficiency: Approx. 13 W typical draw CineD Operating Temperature: 0–50 °C (32–122 °F) suitable for most environments . Fields & Use Cases Ideal For: Outdoor shooting, color monitoring, focus-confirmation, and multi-user viewing scenarios. Pairable with: Optional wireless video transmitters like Claymore, XM1000S — turning the HD7T into a portable wireless monitor

Portkeys MT22DS 21.5-inch PBP Dual-Screen Production Monitor

Portkeys PK-MT22-DS (PK/MT22-DS, PK/MT22/DS, PKMT22DS, PK MT22 DS) MT22DS 21.5-inch PBP Dual-Screen Production Monitor The PORTKEYS MT22DS is a high-performance 21.5" production monitor built for precision monitoring in professional video environments. With a Full HD 1920 x 1080 resolution and a peak brightness of 1000 cd/m², it supports up to 1080p60 video input and delivers sharp, vibrant visuals—ideal for both studio and field use. Dual-Screen Split Monitoring with PBP Designed for multitasking, the MT22DS supports Picture-by-Picture (PBP) display, allowing two input signals to be viewed side-by-side on the same screen. It enables advanced image configurations such as: Dual horizontal or dual vertical layout Mixed left/right vertical-horizontal configurations Cropped versions of the same source side-by-side This makes it ideal for comparing angles, monitoring live feeds, or checking image flips across setups. Versatile Input & Output Options Equipped with HDMI and 3G-SDI inputs and outputs, the MT22DS supports cross-conversion between HDMI and SDI—eliminating the need for external converters. This flexibility enhances compatibility with a wide range of camera and production systems. 3D LUT Support & Output Load custom 3D LUTs via USB to ensure accurate color grading on set. The monitor also allows 3D LUT output via HDMI and SDI, streamlining your post-production pipeline and providing a real-time preview of your graded look. Advanced Monitoring Tools Stay in control of your exposure and image quality with integrated tools such as: Waveform Histogram False Color Zebra Patterns Custom Image Freeze & Overlay Capture a 1920x1080 JPG still and overlay it semi-transparently onto your live feed. This freeze-frame comparison tool is ideal for continuity checks and shot matching during production. Pro-Grade Audio Integration The MT22DS includes: Two 3-pin XLR inputs with 48V phantom power—connect microphones or mixers directly Headphone output jack—for real-time audio monitoring on set Durable Design & Flexible Power Built with an aluminum all-metal chassis, the monitor ensures high durability and efficient heat dissipation in demanding production conditions. It comes ready for professional use with: Dual V-mount battery plate Folding desktop mount AC power adapter

Portkeys LH7P 7" High-Bright Touchscreen Monitor w/ Wireless Control

Portkeys LH7P 7" High-Bright Touchscreen Monitor w/ Wireless Control (PK/LH7P, PKLH7P, PK LH7P, PK_LH7P)  The Portkeys LH7P is a professional 7-inch high-bright touchscreen camera monitor designed for filmmaking, broadcast, content creation and professional video production workflows. Featuring a bright 1000-nit display, HDMI connectivity and responsive touchscreen operation, the LH7P provides reliable on-camera monitoring for directors, camera operators, focus pullers and content creators working in studio or outdoor shooting environments. The monitor supports wireless camera control functionality and professional monitoring tools, making it ideal for cinema cameras, mirrorless cameras, DSLR rigs and broadcast production setups.   Compact and lightweight, the LH7P is suitable for handheld rigs, gimbals, cinema production, ENG workflows and mobile filmmaking applications. * Wireless control does not mean wireless video transmission; the video signal cable must still be connected. Suitable For   Filmmaking Cinema production Broadcast workflows Content creation Focus pulling Director monitoring Gimbal setups DSLR & mirrorless camera rigs

Portkeys PT6 5.2-inch On-camera Monitor

Portkeys PK-PT6 (PK/PT6, PKPT6, PK PT6, PK_PT6) PT6 5.2-inch On-camera Monitor The Portkeys PT6 is a lightweight 5.2-inch on-camera touchscreen monitor with an impressive budget/feature ratio, all in a very compact form factor. The housing of the PT6 is made of robust polycarbonate and ABS that helps keeps the weight down to only 165g/5.82oz (without battery). This monitor has a maximum brightness of 600nits, perfect for shooting indoors or in a controlled studio environment. The 10-bit (8+2 FRC) panel covers 100% of the DCI-P3 color space, which means no color banding, accuracy, and true-to-life color reproduction. This 5.2-inch monitor has a FullHD 1920 x 1080 resolution, a large 178° viewing angle, and a 1500:1 contrast ratio. On the left side of the monitor, you’ll find an HDMI input port that can take resolutions up to 4K DCI at 24fps or 4K UHD at up to 30fps. On the right end side, an HDMI output port with a maximum resolution of 1080p60 allows you to output a clean video feed. Furthermore, the HDMI output can also display a video signal with a 3D LUT, anamorphic de-squeeze, and image adjustments such as contrast, brightness, and tone modifications. But don’t let the compact form factor of the PT6 fool you, as it is packed with many professional monitoring tools, including: Exposure tools: Luma and RGB Waveform, Histogram, and Zebra to accurately expose the image. 3D LUT monitoring and 3D LUT HDMI output. You can load custom LUTs via the USB port on the left side of the monitor. False Color and ARRI False Color mode. A new Peaking algorithm with a Peaking Frame feature so your camera’s UI can stay clear. Customized image crop to zoom in anywhere in the image. Framing guides, grids, aspects. Audio meters, and you can also monitor your audio signal via the 3.5mm headphone jack on the left side of the PT6. Anamorphic image de-squeeze with all the standard ratios (1.33x, 1.5x, 2.0x) and the possibility to enter a custom aspect ratio from 0.25 to 4.0x. Stretch leg tool: when shooting vertically, you can stretch the bottom part of the image. Sharpness, chroma, brightness, backlight, tint, and color temperature adjustments. In terms of power, you’ll find a dual built-in battery plate at the back of the monitor that accepts either Sony NP-F or Canon LP-E6 batteries. With an extremely low power draw of only 6W, a single Canon LP-E6 battery pack can give you up to three hours of battery life!  

Portkeys LH7H 7-inch Touchscreen Monitor

Portkeys PK-LH7H (PK/LH7H, PKLH7H, PK LH7H, PK_LH7H) LH7H 7-inch Touchscreen Monitor The Portkeys LH7H is a feature-rich, entry-level 7-inch monitor designed for filmmakers and content creators seeking a daylight-viewable solution. Weighing just 245g (8.6oz) without battery, its lightweight yet durable construction is made from Polycarbonate and ABS. The unit includes four user-assignable function buttons and multiple 1/4”-20 mounting points, making it easy to integrate into any camera or rig setup. With a peak brightness of 1,000 nits, the LH7H ensures excellent visibility even in bright outdoor environments. The 10-bit (8+2 FRC) Full HD 1920 x 1080 display offers accurate color reproduction with a wide viewing angle and a 1000:1 contrast ratio. It supports 4K HDMI input (up to 4K DCI 24p, 4K UHD 30p, and 1080p 60p) and Full HD HDMI output, with 4K-to-1080p oversampling for enhanced image clarity and detail. Powering the LH7H is simple and flexible. A built-in Sony NP-F battery plate offers hours of operation with low power consumption of just 8W. For continuous power on professional rigs, a 7-24V 5.5mm barrel input is available. The multi-functional USB-A port lets you load custom 3D LUTs, update firmware, and functions as a 5V/2A power input/output. Despite its compact size, the LH7H is loaded with professional monitoring features: 3D LUT monitoring and HDMI LUT output, with easy USB loading via the included USB drive ARRI-style False Color and customizable user-defined false color settings with adjustable IRE levels Advanced Peaking algorithm with Peaking Frame to keep your camera UI uncluttered Cropping tool for targeted image zoom Framing tools, including guides, aspect masks, grids, and auto image flip Image Capture & Overlay for shot matching and continuity checks Anamorphic de-squeeze for 1.33x, 1.5x, 2.0x, and custom ratios (0.25–4.0x) Stretch Leg function for vertical shooting, with HDMI output support Full control over sharpness, chroma, brightness, backlight, tint, and color temperature settings The Portkeys LH7H is a reliable, full-featured monitoring companion built to meet the needs of modern video production – without weighing you down.  

Portkeys BM5 III 5.5-inch On-camera Monitor

Portkeys PK-BM5-III (PK/BM5-III, PK/BM5/III, PKBM5III, PK BM5 III) BM5 III 5.5-inch On-camera Monitor The Portkeys BM5 III is a robust 5.5-inch on-camera monitor ready for all your next creative adventures thanks to its compact form factor, daylight-viewable touchscreen, four user function buttons, a full suite of professional monitoring tools, and the capability to control your camera. The housing of the BM5 III is entirely made of rugged aluminum and has toughened glass in front of the display. However, with a weight of only 351g/12.3oz (without battery), you’ll easily forget it on your camera rig. With a high brightness of 2,200 nits, shooting outside in bright sunlight is no longer a problem. Each BM5 III WLED display is factory color-calibrated and passes strict hardware controls to ensure the most accurate colors. In addition, the 10-bit (8+2 FRC) panel makes color reproduction more accurate with a rich level of color details and no color banding. This 5.5-inch monitor has a FullHD 1920 x 1080 resolution, a large 178° viewing angle, and a 1000:1 contrast ratio. When it comes to power, with a low power draw of only 16W despite the highly bright 2,200 nits display, the built-in Sony NP-F-style battery plate at the back of the Portkeys BM5 III can power it for hours.  Furthermore, if an external battery powers your camera rig, the monitor features a 4-pin aviation 7.4V-24V power input, so you can use the included D-Tap to 4-pin aviation cables (40cm and 100cm) to power your monitor infinitely. Also, the 4-pin aviation 7.4V power output can power small camera accessories, such as a wireless follow focus motor. With both SDI and HDMI video inputs, the BM5 III is a future-proof monitor. Also, the SDI video output with HDMI cross-conversion ensures perfect video continuity no matter where the monitor is placed in the video signal chain. The SDI Output can output a clean video feed, but you can also output a 3D LUT and peaking if needed. Despite its compact form factor, the BM5 III is packed with all the monitoring features you can expect from a professional on-camera monitor, including: A high-precision Waveform that you can display in various modes, including full-screen. Also, you can output the Waveform via the SDI output port. In addition, Histogram and Zebra tools are also here to help you judge your exposure. 3D LUT monitoring and 3D LUT SDI output. You can load custom LUTs via the USB-A port at the bottom of the monitor and the included USB key. ARRI False Color mode and user-defined mode. When you use the user-defined mode, you can freely set the IRE values. A new Peaking algorithm to help you nail focus easily. A Zooming feature is also available. Framing guides, grids, aspects. Image Capture and Image Overlay. Image Capture takes a snapshot of the HDMI or SDI video input (combined with a LUT if desired) and saves it to the monitor’s memory. Then, you can set the transparency/opacity of the Image Overlay. This feature is helpful for shot matching (continuity) or a quick overview of the day’s shots. Anamorphic image de-squeeze. Sharpness, chroma, brightness, backlight, tint, and color temperature adjustments. On top of all the professional monitoring features, the Portkeys BM5 III also has wired camera control capabilities. The monitor can control multiple RED, Sony, Canon, Panasonic, BMD, and ZCAM E2 cameras. Furthermore, the BM5 III supports wired control of your TILTA Nucleus N/M wireless follow focus motors, and the focus scale can even be displayed. Lastly, the optional REC Key can be connected to the Portkeys BM5 III, which gives you an extended recording switch.

Portkeys BM5IV 5.5" 2000nit Touchscreen Wide Color Gamut On-camera Monitor

Portkeys PK-BM5-IV (PK/BM5-IV, PK/BM5/IV, PKBM5IV, PK BM5 IV) Portkeys BM5IV 5.5" 2000nit Touchscreen Wide Color Gamut On-camera Monitor Portkeys BM5IV 5.5" 2000nit SDI HDMI Touchscreen Monitor The Portkeys BM5IV is a professional 5.5-inch high-bright on-camera monitor designed for filmmakers, camera operators, focus pullers and content creators. Featuring a 2000-nit daylight-viewable touchscreen display, wide colour gamut, HDMI and 3G-SDI input/output, the BM5IV provides accurate monitoring for cinema, broadcast, ENG and production workflows.   Built with a durable aluminium housing, the BM5IV is ideal for use on cinema cameras, DSLR, mirrorless rigs, handheld setups and gimbals. It also supports professional monitoring tools including waveform, vectorscope, peaking, false colour and 3D LUT monitoring. Suitable For   Filmmaking Broadcast production Cinema cameras DSLR & mirrorless cameras Director monitoring Focus pulling ENG production Gimbal setups

Portkeys BM5IV WR 5.5-inch Wide Color Gamut On-camera Monitor

Portkeys PK-BM5-IV-WR (PK/BM5-IV-WR, PK/BM5/IV/WR, PKBM5IVWR, PK BM5 IV WR) BM5IV WR 5.5-inch Wide Color Gamut On-camera Monitor Portkeys BM5IV WR – 5.5" Ultra-Bright On-Camera Monitor with Wired & Wireless Camera Control The Portkeys BM5IV WR is a robust 5.5-inch on-camera monitor built for professionals who demand precision, durability, and versatility. Powered by the latest CINENORM OS, it offers both wired and wireless camera control, a daylight-viewable touchscreen, and an extensive set of monitoring tools—all in a rugged, compact design. Built to Withstand the Demands of the Field Constructed entirely from rugged aluminum with a toughened front glass, the BM5IV WR is designed for harsh shooting environments. Thin bezels provide a sleek profile, and at just 358g (12.62oz) without battery, it remains lightweight and easy to mount on any rig. Vibrant, Accurate Display The 2,000-nit ultra-bright display is clearly visible even in direct sunlight, while the 10-bit (8+2 FRC) panel ensures smooth gradations, vivid colors, and no banding. The 1920 x 1080 Full HD resolution, 178° viewing angle, and 1000:1 contrast ratio deliver rich visuals for precise monitoring. Each unit is factory-calibrated, and users can load custom calibration LUTs via USB with an X-Rite color probe if needed. Professional-Grade Monitoring Tools The BM5IV WR is packed with high-end monitoring features, including: Exposure tools: Zebra, False Color, ARRI False Color, LOG False Color, User-defined modes, full-screen waveform, histogram Image analysis: Luma/RGB waveform, vectorscope, histograms, audio meters Focus assist: Advanced peaking algorithm, edge enhance, grayscale/color peaking, zoom-in focus Color tools: 3D LUT monitoring/output via SDI, HDR (HLG) mode, USB LUT loading Framing tools: Guides, grids, crosshair, check field, rectangle crop, aspect ratio markers Anamorphic de-squeeze: Standard (1.33x, 1.5x, 2.0x) and custom ratios (0.25x to 4.0x) Image Capture & Overlay: Save a snapshot from HDMI or SDI input and overlay it with adjustable opacity Flexible I/O and Video Processing The monitor includes: 2 x HDMI input/output (up to 4K DCI 60p) 1 x 3G-SDI input 1 x 3G-SDI output (clean feed or with LUT/peaking) It supports HDMI↔SDI cross-conversion and dual video signal monitoring with multiple viewing modes: Picture-in-Picture Dual horizontal/vertical Left horizontal & right vertical Left vertical & right horizontal Perfect for multi-camera shoots or simultaneous framing in 16:9 and 9:16 for social media content. Camera Control Capabilities More than just a monitor, the BM5IV WR provides camera control for over 80 models from 8 major brands, including: RED (DSMC2, KOMODO, KOMODO-X, V-RAPTOR, V-RAPTOR XL) – RED-approved; wireless control with full camera settings and touch-to-focus ARRI Alexa Mini – Wireless control Nikon Z8/Z9 – Wireless control This makes it an ideal solution for cinematographers, DPs, directors, focus pullers, and solo creators who need powerful control and high-end monitoring in a single device.

Portkeys LEYE III 2.4-inch LCD Electronic Viewfinder

Portkeys PK-LEYE-III (PK/LEYE-III, PK/LEYE/III, PKLEYEIII, PK LEYE III) LEYE III 2.4-inch LCD Electronic Viewfinder The LEYE III from Portkeys is a compact 4K HDMI EVF designed for professional filmmakers. Featuring a 2.4" LCD with 1440 x 900 resolution, 450 cd/m² brightness, and a 1100:1 contrast ratio, it delivers sharp, vibrant visuals even in bright environments. The EVF supports video input up to DCI 4K30 via HDMI. Its diopter adjustment range of -3 to +8 accommodates various eyesight needs. The LEYE III includes essential software tools such as waveform, histogram, scaling, image flip, zoom, guides, and crop. You can import 3D LUTs via the USB Type-A port, with optional waveform detection pre- or post-LUT application. Built with a rugged metal housing, the unit offers versatile mounting options: ARRI-style anti-twist mount, NATO rail, or a 1/4"-20 thread. A passive heatsink ensures efficient heat dissipation during extended use. Power options include a self-locking 4-pin aviation-grade D-Tap cable and a built-in Canon LP-E6 battery plate. Accessories include an HDMI right-angle adapter, USB drive for firmware updates, and a soft flat eye sponge ideal for eyeglass wearers. 2.4" LCD, 1440 x 900 resolution, 8-bit color, 450 cd/m² brightness, 1100:1 contrast Supports up to DCI 4K30 video input via HDMI USB Type-A port for 3D LUT import and firmware updates Advanced tools: image flip, false color, histogram, scaling, peaking, crop, zebra, grids -3 to +8 adjustable diopter ARRI-style, NATO, and 1/4"-20 mounting options Durable all-metal construction Passive cooling system Power via included D-Tap cable or Canon LP-E6 battery

Portkeys PT5 II 5-inch Touchscreen On-camera Monitor

Portkeys PK-PT5-II (PK/PT5-II, PK/PT5/II, PKPT5II, PK PT5 II) PT5 II 5-inch Touchscreen On-camera Monitor The Portkeys PT5 II is a compact, ultra-lightweight 5-inch on-camera monitor designed for content creators and filmmakers seeking an affordable yet capable monitoring solution. Weighing just 125g (4.41oz) thanks to its durable polycarbonate body, it offers excellent portability without compromising on features. Toughened glass protects the touchscreen display from scratches, while its slim profile (136 x 72 x 18.3mm) makes it feel as compact as a smartphone on your rig. The PT5 II delivers vivid and accurate visuals with its 5-inch Full HD (1920 x 1080) panel, 500-nit brightness, 1000:1 contrast ratio, and wide 178° viewing angle. Its 10-bit (8+2 FRC) color processing ensures smooth gradients and rich detail without color banding. Despite its entry-level positioning, the PT5 II includes a full suite of professional monitoring tools: Exposure tools: Luma & RGB waveform, histogram, false color, zebra Focus assist: Enhanced peaking algorithm LUT support: Load 3D LUTs via USB for precise color monitoring Framing tools: Grids, guides, image flip, and custom aspect ratios (0.25x to 4.0x) Anamorphic de-squeeze: Supports standard and custom squeeze ratios Audio monitoring: On-screen meters and a 3.5mm headphone jack Image controls: Adjust sharpness, chroma, brightness, tint, and color temperature The monitor features a 4K HDMI input and output, supporting signals up to 4K DCI 24p, 4K UHD 30p, and 1080p 60p. A 3.5mm headphone jack on the left side allows direct audio monitoring. For power, the PT5 II offers excellent flexibility with a dual battery plate supporting both Sony NP-F and Canon LP-E6 batteries. Its low power consumption (only 7W) enables long runtimes on a single battery. Additionally, a 5.5mm barrel connector (7.4–24V) on the right side allows continuous operation with external power sources. Compact, capable, and budget-friendly, the Portkeys PT5 II is an ideal companion for anyone needing reliable on-camera monitoring in a lightweight package.

Portkeys LH5P II 5.5-inch Gamut On-camera Monitor

Portkeys PK-LH5P- II (PK/LH5P- II, PK/LH5P/II, PKLH5PII, PK LH5P II) LH5P II 5.5-inch Gamut On-camera Monitor The Portkeys LH5P II is a feature-rich 5.5-inch on-camera monitor designed as an accessible entry point into both wired and wireless camera control. Built with durability in mind, it features an all-aluminum housing and toughened front glass, ensuring long-lasting performance on set. Despite weighing just 285g (10.05oz) without battery, it offers a robust toolset for demanding shoots. With a peak brightness of 2,000 nits, the LH5P II remains clearly visible even in direct sunlight. Its 10-bit (8+2 FRC) panel delivers rich, accurate colors without banding, with 100% Rec.709 and 85% DCI-P3 color space coverage. Each unit is factory color-calibrated to ensure consistency and reliability. The 5.5-inch Full HD (1920 x 1080) display boasts a wide 178° viewing angle and a 1000:1 contrast ratio, providing sharp, vibrant visuals from virtually any angle. The monitor supports input/output up to 4K DCI at 24p, 4K UHD at 30p, and Full HD 1080p at 60p via its 4K HDMI input and output ports. Power flexibility is a core strength of the LH5P II. It features a built-in Sony NP-F battery plate for portable use and a 5-pin aviation power input (7–24V) for extended runtime with external batteries. An included D-Tap to 5-pin aviation cable simplifies this setup. This same power port can also output 5V 1A to power small accessories. Additional features include four user-assignable function buttons, camera control (including record start/stop), and a full suite of professional monitoring tools—all housed in a lightweight, rugged design built for field reliability.

Portkeys MT22DS P3 21.5-inch Professional Production Monitor

Portkeys PK-MT22DS-P3 (PK/MT22DS-P3, PK/MT22DS/P3, PKMT22DSP3, PK MT22DS P3) MT22DS P3 21.5-inch Professional Production Monitor The Portkeys MT22DS P3 is a 21.5-inch professional production monitor built for demanding on-set use. With 1200 nits of brightness, it’s fully daylight-viewable, making it ideal for outdoor shoots. Designed for DITs, DPs, ACs, and Video Village setups, this rugged monitor offers exceptional versatility, color accuracy, and extensive I/O options. The Full HD 1920 x 1080 screen features a 1000:1 contrast ratio, wide viewing angles, and an 8-bit panel with 97% P3 color space coverage. Each unit is factory-calibrated to ensure accurate, banding-free color reproduction. Built from durable aluminum, the MT22DS P3 includes twelve 1/4"-20 mounting points and a rear carry handle for easy transport. It comes with a detachable table stand and supports VESA mounting for stand or rig integration (optional adapter available). For power, the monitor offers flexible options: dual Sony NP-F plates with passthrough power for wireless video receivers, a 4-pin XLR (12–24V) input for AC mains, and dual V-Mount battery plates for mobile setups. The monitor includes two full-size 3-pin XLR audio inputs with 48V phantom power, allowing audio embedding into the SDI output—ideal for livestream workflows. Advanced Viewing Modes: Dual-screen (horizontal/vertical combinations) Triple-screen mode with rotation and mirroring Simultaneous display of 16:9 and 9:16 crops for social media previews Multi-camera support for 2–3 input feeds With its robust design, precise color, and intelligent features, the Portkeys MT22DS P3 is a reliable monitor for every production environment—studio or location.  

Portkeys PT5-III 5.4-inch Touchscreen Monitor

Portkeys PK-PT5-III (PK/PT5-III, PK/PT5/III, PKPT5III, PK PT5 III) PT5-III 5.4-inch Touchscreen Monitor The Portkeys PT5 III is a compact and ultra-lightweight 5.4-inch on-camera monitor made from durable ABS and polycarbonate materials. Weighing just 154.5g (5.45oz) and measuring only 135.1 x 82.5 x 22mm, it’s ideal for mounting on cameras, rigs, or gimbals without adding bulk. Its 8-bit touchscreen display features a crisp 1920 x 1152 resolution, 800nits of brightness, a 1000:1 contrast ratio, and a wide 178° viewing angle. Running on the intuitive MOVNORM OS, the PT5 III offers a user-friendly interface along with a comprehensive suite of professional monitoring tools: 3D LUT Support: Load and monitor custom LUTs via the USB-A port. LUT output through HDMI is supported. Anamorphic De-squeeze: Includes standard ratios (1.33x, 1.5x, 2.0x) and custom aspect ratios from 0.25x to 4.0x. Stretch Leg Tool: For vertical shooting, stretch only the bottom part of the image—output supported via HDMI. Customizable False Color: 13 modes, including ARRI False Color. Exposure Tools: RGB and Luma waveform, histogram, adjustable zebra. Image Capture & Overlay: Snapshot your video feed (with or without LUTs) for continuity or shot matching. 360° Color Grader: Isolate and adjust hue/saturation for specific image areas. Image Flip: Built-in for versatile monitor placement. Rectangle Cropping: Zoom into specific areas with custom presets—ideal for live streaming. Peaking: Define focus zones and zoom for precise focusing. Framing Tools: Crosshair, guides, grids, check field, rectangle crop. Image Adjustments: Contrast, brightness, sharpness, color temperature, and tint. Audio Monitoring: On-screen audio meters. Advanced Display Settings: Includes HDR HLG mode, OSD flip, and backlight controls. Connectivity & Power Inputs: HDMI (up to 4K DCI 30p), 3.5mm headphone jack, 3.5mm mic input. Outputs: HDMI (up to 1080p60), USB-C for external power, USB-A for LUTs and firmware updates. Battery: Integrated Sony NP-F battery plate; a low-power NP-F550 battery can last over two hours (7W power draw). Mounting: Dual 1/4"-20 mounting points with locating pins (bottom and right sides). On the left side of the PT5 III is one HDMI video input port that supports resolutions up to 4K DCI at 30p, along with a 3.5mm headphone jack and a 3.5mm microphone input. The HDMI output port that supports resolutions up to 1080P60 is situated on the right side of the monitor. Above the HDMI output port is one USB-C port which can be used to power the monitor externally via a power bank or V-Mount/Gold Mount battery, for example On the back of the Portkeys PT5 III is an integrated battery plate compatible with Sony NP-F style batteries. With a low power consumption of just 7W, a compact and lightweight Sony NP-F 550 battery can power the monitor for over two hours. For extended usage, you can connect the PT5 III to an external power source using its USB-C port. Additionally, there is a USB-A port located at the bottom of the monitor for performing firmware updates and uploading custom LUTs.  

Portkeys BM7 II DS 7-inch High-Bright Monitor

Portkeys PK-BM7-II-DS (PK/BM7-II-DS, PK/BM7/II/DS, PKBM7IIDS, PK BM7 II DS) BM7 II DS 7-inch High-Bright Monitor The Portkeys BM7 II DS is a rugged 7-inch on-camera monitor that builds on the legacy of the popular BM5 III WR, offering an expanded feature set in a larger format. It retains key professional tools like a bright, daylight-viewable touchscreen, four customizable function buttons, wired and wireless camera control, and now adds a larger screen, more I/O options, and advanced monitoring capabilities. Constructed from durable aluminum and protected with reinforced glass, the BM7 II DS is designed to withstand the rigors of demanding sets. Weighing just 460g (16.2oz), it’s lighter than many 5-inch monitors on the market, while offering a larger viewing area. 1/4″-20 mounting points with ARRI locating holes on the top and bottom ensure flexible rigging options. With a brightness of 2,200 nits and a Full HD 1920x1080 resolution, the BM7 II DS excels in outdoor environments. The 10-bit (8+2 FRC) display delivers rich color reproduction without banding and supports 100% Rec.709 and 85% DCI-P3 color space coverage. Each unit is factory-calibrated for accurate color fidelity. Despite its size and brightness, the monitor consumes only 15W of power and features a dual NP-F battery plate with hot-swapping support—only one battery is required to run the monitor at full capacity. It also includes two power input options: a 2-pin LEMO and a locking 5.5mm barrel connector (with D-Tap cable included). Connectivity is comprehensive: two 3G-SDI inputs, one SDI output, and HDMI input/output. HDMI-to-SDI cross-conversion ensures seamless signal routing. Both SDI and HDMI outputs can deliver a clean feed or a video signal with a 3D LUT applied. The BM7 II DS supports dual-input monitoring with various split-screen modes: horizontal, vertical, and hybrid layouts. You can even view a single source cropped in 16:9 and 9:16 simultaneously—perfect for creating content for both traditional and social platforms. Advanced Camera Control: Wireless Control (2.4GHz WiFi): Compatible with RED Komodo, V-RAPTOR, and various Sony models (A7S III, A7 IV, FX3, FX30, etc.) Bluetooth Control: Supported for Blackmagic BMPCC 4K/6K/6K Pro Wired Control: Available for cameras from Sony, Canon, Panasonic, Blackmagic, and Z CAM Follow Focus Integration: Direct motor control via TILTA Nucleus N/M, with on-screen focus scale display  

Portkeys HS8 8-inch Director Monitor

Portkeys PK-HS8 (PK/HS8, PK_HS8, PKHS8, PK HS8) HS8 8-inch Director Monitor Portkeys HS8 – 8" High-Bright Director Monitor with Rugged Build and Wireless Receiver Integration The Portkeys HS8 is a robust and feature-rich 8-inch director monitor, built to meet the demanding needs of filmmakers and video professionals. With its rugged all-aluminum housing and removable protective display glass, the HS8 is engineered to endure challenging shooting environments while delivering high-performance monitoring. Compact and practical, the HS8 measures 208 x 133.7 x 50.5mm and weighs just 675g (1.48 lbs)—perfect for directors, focus pullers, camera crews, or clients to share on set. Stunning Visual Performance The monitor boasts a 1920 x 1200 resolution, 10-bit (8+2 FRC) color depth, 1,100 nits brightness, and a 1000:1 contrast ratio, making it suitable for both studio and outdoor use. Its color-accurate display ensures rich detail without banding, right out of the box. Professional Connectivity & I/O All input/output ports are neatly recessed at the bottom for added protection. Key video ports include: 1x 4K DCI 60p HDMI input 1x 3G-SDI 1080p60 input 1x HDMI output 1x 3G-SDI output Both outputs support up to 1080p60 and feature cross-conversion (HDMI to SDI and vice versa), with 3D LUT output through both. Additional I/O features: 3.5mm headphone jack USB-A port for LUTs and firmware updates Locking 7–20V DC input (via included D-Tap to 5.5mm barrel cable) Dual Power Options At the rear, the HS8 includes a dual Sony NP-F battery plate with hot-swap capability, providing up to five hours of runtime with two NP-F970 batteries. It also supports extended use via external DC power input. Unique Power Output Feature A standout feature of the HS8 is its rotatable, removable NP-F dummy battery power output, allowing you to directly power a wireless video receiver (8V/10W passthrough). This patented design lets you rotate the dummy battery 360° tool-free, using a large yellow knob—ideal for keeping your setup clean and integrated. Mounting Flexibility Equipped with VESA 100 x 100 mounting holes, the monitor easily mounts to C-stands or light stands using standard monitor arms. Additionally, four 1/4"-20 threaded mounting points with locating pins allow for versatile rigging, tripod mounting, or direct attachment of side handles. Intuitive Controls On the top panel: 4 customizable function buttons Power switch Input switch (HDMI/SDI) Menu scroll wheel with push function Thanks to its large 8" screen, the HS8 can display multiple monitoring tools simultaneously with partial overlays for quick access. Advanced Monitoring Tools The HS8 comes packed with tools to ensure precise monitoring and decision-making on set, including: 3D LUT monitoring and output via SDI/HDMI LUT loading via USB-A Waveform, RGB & Luma Histograms Adjustable Zebra Customizable False Color (13 presets including ARRI) Anamorphic De-Squeeze (1.33x, 1.5x, 2.0x + custom ratios 0.25x–4.0x) Focus Assist (Peaking & Zoom) SDI Level A/B auto output and progressive-to-interlaced conversion Framing tools: crosshair, check field, guides, grids, crop Audio meters Extensive display settings: black level, backlight, contrast, sharpness, chroma, tint, HDR HLG, OSD Flip, color temp

Portkeys LH7P 7" inch High-Bright Touchscreen Monitor - White

Portkeys PK-LH7P-W (PK/LH7P-W, PK/LH7P/W, PKLH7PW, PK LH7P W) LH7P 7" inch High-Bright Touchscreen Monitor -  White The Portkeys LH7P is an affordable 7-inch monitor designed for Sony and Blackmagic Design users, offering wireless camera control and professional-grade monitoring features. Built from durable yet lightweight ABS and polycarbonate, it weighs just 245g (8.6oz) without a battery—ideal for portable rigs and field use. With a daylight-viewable touchscreen, four customizable function buttons, and three 1/4"-20 mounting points (bottom, left, and right), the LH7P integrates seamlessly into any camera setup, enhancing your efficiency on set. The LH7P delivers a Full HD 1920 x 1080 resolution, 10-bit (8+2 FRC) color depth, and 1000:1 contrast ratio, with a wide viewing angle and 1,000 nits of brightness—perfect for outdoor visibility. It supports 4K HDMI input (DCI 24p, UHD 30p) and Full HD 1080p up to 60p, with 4K-to-1080p oversampling for improved image detail. A Full HD HDMI output is also included. Power options include a built-in Sony NP-F battery plate and a 5.5mm barrel input (7–24V) for continuous external power. With only 9W of power draw, the monitor can run for hours on a single battery. Professional Monitoring Tools: 3D LUT support with HDMI output; load custom LUTs via the USB port and included USB key. False Color modes including ARRI and customizable IRE values. Advanced Peaking algorithm with Peaking Frame to maintain a clear camera UI. Cropping, Framing Guides, Aspect Markers, Grids, and Auto Image Flip. Image Capture & Overlay: save and overlay screenshots for continuity or shot reference. Anamorphic De-Squeeze: standard (1.33x, 1.5x, 2.0x) and custom (0.25–4.0x) ratios. Stretch Leg Tool for vertical shooting, with HDMI output support. Manual Adjustments: sharpness, chroma, brightness, backlight, tint, and color temperature. Built-in Wireless Camera Control: The LH7P includes a built-in 2.4GHz WiFi module (no external antenna required) for wireless control of select Sony cameras, such as the A7S III, A7 IV, A7R V, A1, FX3, FX30, ZV-1, and more. Adjust ISO, aperture, shutter, zoom, and frame rate directly on the touchscreen, start/stop recording, and tap to focus. A built-in Bluetooth module allows camera control of Blackmagic Design BMPCC 4K, 6K, and 6K Pro models. Note: Wireless camera control refers only to settings and triggering. Video signal must still be transmitted via HDMI.

Portkeys PL5 5.4" inch 4K HDMI/USB Monitor

Portkeys PK-PL5 (PK-PL5, PK-PL5, PK-PL5, PK-PL5) PL5 5.4" inch 4K HDMI/USB Monitor The Portkeys PL5 is a compact 5.4-inch on-camera monitor that also functions as a live-streaming capture card. Constructed from lightweight ABS and polycarbonate, it weighs just 154.5g (5.45oz) and measures 135.1 x 82.5 x 22mm—making it an ideal choice for portable shooting setups. The PL5 features a 5.4-inch 10-bit (8+2 FRC) touchscreen display with a 1920 x 1152 resolution, 500 nits brightness, 1000:1 contrast ratio, and a wide 178° viewing angle. Powered by the intuitive MOVNORM OS, it offers a full suite of professional monitoring tools, including: 3D LUT support with HDMI and USB-C output capabilities; custom LUTs can be loaded via the bottom USB-A port. Advanced False Color with 13 presets, including ARRI False Color. RGB and Luma Waveform/Histogram tools, plus adjustable Zebra settings. Anamorphic de-squeeze options for standard (1.33x, 1.5x, 2.0x) and custom (0.25–4.0x) aspect ratios. Stretch Leg tool for vertical shooting, with HDMI output compatibility. On the left side, the PL5 includes a 4K DCI 30p HDMI input, 3.5mm headphone output, and 3.5mm mic input. On the right, you'll find HDMI and USB-C outputs (up to 1080p60). The USB-C port also serves as a video output for live streaming via OBS when connected to a computer. As a true all-in-one device, it also offers: 3D LUT application on output video. A 360° color grading tool for selective hue and saturation adjustments. The rear of the PL5 houses a built-in Sony NP-F battery plate. With only a 7W power draw, a small NP-F550 battery can run the monitor for over two hours. For extended use, it can also be powered via the USB-C port. A USB-A port at the bottom allows for firmware updates and LUT loading. Mounting options include two 1/4”-20 threads with locating pins on the bottom and right sides—ideal for attaching to cameras, rigs, tripods, or gimbals.

Portkeys LH7H 7" inch High-Bright Touchscreen Monitor - White

Portkeys PK-LH7H-W (PK/LH7H-W, PK/LH7H/W, PKLH7HW, PK LH7H W) LH7H 7" inch High-Bright Touchscreen Monitor - White The Portkeys LH7H is a compact, entry-level 7-inch monitor featuring a daylight-viewable touchscreen, professional-grade monitoring tools, and a durable yet lightweight polycarbonate/ABS housing weighing just 245g (8.6oz, without battery). With multiple 1/4”-20 mounting points, it easily attaches to your camera or rig. Delivering up to 1,000 nits of brightness, the LH7H ensures clear visibility even in bright outdoor conditions. Its 10-bit (8+2 FRC) Full HD (1920x1080) panel offers accurate color reproduction, a wide viewing angle, and a 1000:1 contrast ratio. It includes a 4K HDMI input and Full HD HDMI output, supporting up to 4K DCI 24p, 4K UHD 30p, or Full HD 1080p at 60p. The HDMI input also enables 4K-to-1080p oversampling for enhanced image detail. Power options include a built-in Sony NP-F battery plate with a low 8W power draw, as well as a 7–24V 5.5mm barrel DC input for continuous operation from external batteries (V-Lock/Gold Mount). A versatile USB-A port allows you to load 3D LUTs, update firmware, or use it as a 5V/2A power I/O. Despite its compact size, the LH7H offers an impressive range of monitoring features: 3D LUT support for both monitoring and HDMI output, with USB key support for custom LUTs ARRI False Color mode and customizable IRE settings Enhanced Peaking algorithm with Peaking Frame for UI clarity Cropping tool for precise image zooming Framing tools: guides, grids, aspect ratios, and auto image flip Image Capture & Overlay: snapshot HDMI input with LUT (optional), adjustable opacity—ideal for continuity and shot matching Anamorphic de-squeeze: supports 1.33x, 1.5x, 2.0x, and custom ratios (0.25x–4.0x) Vertical “Stretch Leg” mode, applicable to HDMI output Manual adjustments: sharpness, chroma, brightness, backlight, tint, and color temperature The LH7H combines professional functionality with an intuitive interface and lightweight design—perfect for filmmakers seeking performance on a budget.