SWIT MA-S75P Luxury package part for CM-S75 series monitors

SWIT MA-S75P Luxury package part for CM-S75 series monitors MA S75P MAS75P MA-S75P MA/S75P Swit Luxury package part for CM-S75.   Includes MA-K75S (NP-F to V-mount Plate), MA-H75(Sun Hood), Arm trestle 1/4" & cold shoe and a carrying case.

SWIT BM-H245 | 23.8" 12G-SDI 4K QLED HDR 100%DCI-P3 Zero-Delay professional FHD Monitor with Auto-Calibration

SWIT BM-H245 | 23.8" 12G-SDI 4K QLED HDR 100%DCI-P3 Zero-Delay professional FHD Monitor with Auto-Calibration BM H245 BMH245 BM-H245 BM/H245 23.8-inch FHD Panel 8-bit IPS LCD BM-H245 adopts a 23.8-inch FHD 1920x1080 LCD panel, 8-bit 16.77M colours, 250nits, 1000:1 contrast, H/V 178° viewing angle for broadcast and film productions. Multi 4K Interfaces BM-H245 provides 4x SDI inputs and 2x SDI loop outputs, supports multiple 4K inputs including: - 12GSDI Single link 4K; - 4x3GSDI Quadlink 4K, (SQD and 2SI) - HDMI 2.0 (4K60P) Display Modes Supports Single link 4K input including 12GSDI, HDMI2.0, and Quad link 4x 3GSDI 4K inputs. You can also input 4x independent sources to multi view, or 2x sources Pic-by-Pic or Pic-in-Pic view, supports 12G/6G/3G/HD-SDI and HDMI 2.0/1.4/1.3 mixed formats input, and waveform, vector, audio meters, EOTF, colour gamut selection for each input. Multi CG & EOTF Viewing Supports 1 input source copied to 4 windows and display different HDR/SDR and colour gamut simultaneously. You can get correct reference when producing HDR and SDR together. HDR/SDR De-log LUTs The monitor has built-in multi camera logs to HLG1000, PQ1000 or Rec 709 SDR conversion LUTs, including Log-C, C-log, S-log2, S-log3, V-log, J-log1, RedLogFilm etc. You can also upload User LUTs to monitor by USB disk, support 17x17x17 3DLUT cube files. Audio Patterns Max 16-ch embedded audio meters display, and select any 2 channels audio to output via speaker or 3.5mm headphone socket. Moreover, BM-H monitors support Lissajous figures and 5.1 & 7.1 surround sound patterns. Key Features: 12GSDI, 4x3GSDI, HDMI2.0 4K input 4-ch SDI/HDMI mixed multi view 2-ch SDI/HDMI PBP or PIP view Multi Colour Gamut & HDR/SDR Viewing 18-bit internal colour processing Audio/Video Zero latency for lip-sync 3DLUT Auto Self-calibration without PC Built-in Multi camera Delog LUTs User 3DLUTs upload via USB Waveform / Vector / Histogram / Eye pattern Focus assist / False colour / Zebra 16-ch audio meters / Lissajous pattern 5.1 & 7.1 surround sound phase pattern IP webserver remote control TSL UMD and text TALLY display USB firmware upgrade  

SWIT S-1243FS 23.8" FHD Studio Monitor with full professional functions

SWIT S-1243FS | 23.8" FHD Studio Monitor with full professional functions S 1243FS S1243FS S-1243FS S/1243FS 23.8" Studio Monitor with full professional functions, 3G SDI/HDMI, 1920*1080,including desktop stand, TSL UMD The S-1243F Waveform Studio LCD Monitor from SWIT adopts a 23.8? LCD panel to produce 3G/SDI/HDMI video in Full HD 1920 x 1080 resolution. It provides a 1000:1 contrast for accurate colour reproduction and comes with a V-Mount battery plate. With four corners and a large centre positioning, the monitor allows for adjusted translucence for waveform and vector scope/histogram. 23.8" LCD panel 1920 x 1080 resolution 2 x 2K/3G/HD/SD-SDI, HDMI monitoring Y/Pb/Pr, VGA, CVBS monitoring Chart positioning / Translucence adjustment Four corners and large centre, with adjusted translucence for waveform and vector scope/histogram 16-channel embedded audio meters with alert SDI: 16-channel / HDMI: 8-channel 2 selectable audio channels to output Peaking focus assist (red/blue switch) Active Format Description (AFD) Timecode, H/V delay TSL UMD and text TALLY display Safety marker 4:3/13:9/14:9/15:9/1.85:1/2.35:1 False colour with colour chart R/G/B/mono colour modes Over exposure zebra stripes Internal colour bar V-Mount battery plate optional USB firmware upgrade  

SWIT S-1223FS 21.5" FHD Studio Monitor with full professional functions

SWIT S-1223FS | 21.5" FHD Studio Monitor with full professional functions S 1223FS S1223FS S-1223FS S/1223FS  21.5" Studio Monitor with full professional functions, 3G SDI/HDMI, 1920*1080,including desktop stand, TSL UMD The 21.5" Full HD Waveform Studio LCD Monitor from SWIT adopts an IPS (In-Plane Switching) LCD panel with full HD resolution. It also features an LED backlight, 1000:1 contrast for accurate colour reproduction, and a viewing angle of 178°. The supported video analysis assistant patterns include: Waveform (Y/Pb/Pr/R/G/B), Vector scope and Histogram (R/G/B/Y). For convenience, the patterns can be switched on/off individually. The monitor can display SDI 16-channel and HDMI 8-channel embedded audio meters with marks and audio abnormal alert info. Users can also select any 2 channels audio to output to the internal speakers or via the 3.5 mm audio output jack. The audio meter pattern position can be selected from Up/Down/Left/Right, and you can select to display 2 channels, 8 channels or 16 channels. It supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection; up to 8 letters can be displayed. The monitor provides a standard USB port for firmware upgrade. You can download the latest firmware file to a USB stick, and directly insert it into the monitor to upgrade; no computer needed. For power, it provides a 4-pin XLR jack for 11-17 VDC, and a V-Mount battery plate enables outdoor using. There are three colours for the Tally light: Red, Green and Yellow. 21.5" LCD panel, 1920 x 1080 resolution 2K/3G/HD/SD-SDI (x2), HDMI monitoring Y/Pb/Pr, VGA, CVBS monitoring 16-channel embedded audio meters with alert Select any 2 audio channels to output Waveform Y/Cb/Cr/R/G/B and single line Vectorscope, Histogram R/G/B/Y Peaking focus assist (red/blue switch) AFD, timecode, H/V delay TSL UMD and text TALLY display Safety marker 4:3/13:9/14:9/15:9/1.85:1/2.35:1 False colour, R/G/B/Mono, zebra stripes, internal colour bar USB firmware upgrade  

SWIT S-1173FS | 17" FHD Studio Monitor with full professional functions

SWIT S-1173FS | 17" FHD Studio Monitor with full professional functions  S1173FS S 1173FS S-1173FS S/1173FS Swit 17" Studio Monitor with full professional functions, 3G SDI/HDMI, 1920x1080,including desktop stand, TSL UMD V-Mount The 17.3" Full HD Waveform Studio LCD Monitor with V-mount battery plate from SWIT offers a 17.3" IPS (In-Plane Switching) LCD panel and Full HD resolution. It also features a horizontal and vertical viewing angle of 160°, an LED backlight, and a 700:1 contrast ratio for accurate colour reproduction. It also supports video analysis assistant patterns that include waveform (Y/Pb/Pr/R/G/B), vector scope, histogram (R/G/B/Y) to convert the digital video quality info (luma, colour, saturation, etc) to patterns (which can be switched on/off individually), and you can select display position (up/down/left/right), size, colour, and translucence. The LCD also supports SDI 16-channel and HDMI 8-channel embedded audio meter displays with marks and abnormal audio alert info. Users can also select any two channels of audio to output via the 3.5 mm socket or through the speakers. The audio meter pattern position can be selected from up/down/left/right, and you can choose to display only two channels, eight channels, or the full sixteen channels. It features a UMD and text tally display using the TSL 3.1/4.0 protocol with 1-126 TSL address selection and a maximum of eight letters displayed. The UMD inputs via RS-485 or RS-232C port and outputs via RS-485 port. The LCD provides a standard USB port for firmware upgrades. Users can download the latest firmware file to a USB stick and directly insert it into the S-1173FS monitor to upgrade, without a PC connection. It has a 4-pin XLR jack rated for 11-17 VDC, and includes a V-mount battery plate for outdoor use. There are red, green and yellow colours for the Tally light. 17.3" LCD panel, 1920 x 1080 resolution 2 x 2K/3G/HD/SD-SDI, HDMI monitoring Y/Pb/Pr, VGA, CVBS monitoring 16-channel embedded audio meters with alerts Select any two audio channels to output Supports video analysis assistant patterns such as waveform Y/Cb/Cr/R/G/B and single line, vector scope, & histogram R/G/B/Y Peaking focus assist (red/blue switch) AFD, timecode, H/V delay TSL UMD and text Tally display Safety marker 4:3/13:9/14:9/15:9/1.85:1/2.35:1 False colour, R/G/B/Mono, zebra stripes, internal colour bar V-mount battery plate 19" rack install, 7U height USB firmware upgrade  

SWIT FM-21HDR 21,5" High Bright HDR Monitor, V-Mount

SWIT FM-21HDR 21,5" High Bright HDR Monitor, V-Mount FM21HDR FM 21HDR FM-21HDR FM/21HDR 21.5-inch 10-bit FHD LCD The FM-21HDR monitor adopts a 21.5 inch LCD panel with LED backlight, 1000nits high brightness. The native resolution is Full HD 1920×1080, contrast 1000:1, and viewing angle is Horizontal: 178° / Vertical: 178° Input/Output Interfaces: 3G-SDI, HDMI FM-21HDR monitor supports： 3G/HD/SD-SDI input × 2 3G/HD/SD-SDI loop output × 1 HDMI 1.3 input × 1 3.5mm analog audio input × 1 3.5mm analog audio output × 1 RS485 UMD input × 1 RS485 UMD output × 1 USB-A LUT/Firmware input × 1 HDR Capable With 1000nit high brightness, FM-21HDR can display HLG and Dolby Vision PQ HDR image by switching the HDR curves for different cameras. Support: ARRI Log-C HLG Rec2020 ARRI Log-C PQ Rec2020 Canon C-log2Cin HLG Rec2020 Canon C-log2Cin PQ Rec2020 Canon C-log3Cin HLG Rec2020 Canon C-log3Cin PQ Rec2020 Panasonic V-Log HLG Rec2020 Panasonic V-Log PQ Rec2020 RED L3G10 HLG Rec2020 RED L3G10 PQ Rec2020 SONY S-Log3 Cin HLG Rec2020 SONY S-Log3 Cin PQ Rec2020 SONY S-Log3 SG3 HLG Rec2020 SONY S-Log3 SG3 PQ Rec2020 Built-in De-log 3DLUTs DITuser 3DLUT cube upload FM-21HDR provides more than 20 De-log 3DLUTs to convert log mode to REC709 for all major cameras. Includes ARRI, RED, SONY, Panasonic, Canon, JVC, BMD, FujiFilm, GoPro, DJI. And the user 3DLUT cube or calibrated 3DLUT cube can be uploaded by USB stick. Video Analysis Assistant Pattern Waveform / Vector scope / Histogram FM-21HDR supports video analysis assistant patterns includes: Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma, Colour, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position (Up/Down/Left/Right), size, colour, and translucence. Embedded audio monitoring: Up to 16-ch meters The monitor can display 16-ch embedded audio meters. The display mode can be: 1. CH1-2 2. CH1-16 3. CH1-4 and CH5-8 4. CH1-4 and CH9-12 5. CH1-4 and CH13-16 6. CH5-8 and CH9-12 7. CH5-8 and CH13-16 8. CH9-12 and CH13-16 Peaking, R/G/B Mono, Zebra, False colour Function Keys Assign 4 User Presets of Function Keys restore There’re 4 F-keys to assign different functions, and you can make independent assignments and restore in 4 User Profiles. Long Press F1/U1, F2/U2, F3/U3, F4/U4 button to recall User 1/2/3/4 with different F1/2/3/4 assignments. Anamorphic de-squeeze Enables de-squeeze the image from a camera utilizing anamorphic lens, Aspect Formats: 16x9, 4x3, x1.3 Anamorphic De-Squeeze x2.0 Anamorphic De-Squeeze x2.0 MAG Anamorphic De-Squeeze TSL UMD and TALLY FM-21HDR supports TSL 3.1 and 4.0 protocol UMD display and front TALLY light via RJ45 (RS485) port in the rear panel, input and output. The available functions are: 1, 2 GND 3 Tx- 4 Rx+ 5 Rx- 6 Tx+ 7,8 NC Various Power Input V-mount / 4-pin XLR / AC FM-21HDR provides 11-17V 4-pin XLR input and 100-240V AC input. A V-mount plate is pre-installed so that you can attach V-mount battery to power the monitor via D-tap to 4-pin XLR cable. The power consumption is 48W. Key Features: 21.5-inch, 1920×1080, 8-bit LCD, 12-bit process, 1000nits high bright 3G/HD/SD-SDI, HDMI, CVBS monitoring HDR: HLG/BT.2100 & SMPTE ST 2084/Dolby vision PQ Built-in multi cameras De-log LUTs and DIT LUTs upload by USB Waveform / Vector / Histogram / 16-ch Audio meters / Timecode Peaking / Focus assist / Exposure assist / Zebra / Blue only Anamorphic de-squeeze / Multiple markers Portable, light weight and C-stand setup  

SWIT M-1093H 2x9" Rackmount IPS LCD Panel

SWIT M-1093H 2x9" Rackmount IPS LCD Panel M 1093H M1093H M-1093H M/1093H IPS panel with LED backlight Swit's M-1093H adopts 2× 9-inch IPS (In-Plane Switching) LCD panels, with Full HD 1920×1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170° / Vertical: 170° Input/Output Interfaces SDI / HDMI / CVBS / Analog Audio Each LCD of M-1093H supports: 2K/3G/HD/SD-SDI input × 2 2K/3G/HD/SD-SDI loop output × 2 HDMI 1.3 input × 1 HDMI 1.3 loop output × 1 CVBS input × 1 CVBS loop output × 1 3.5mm analog audio input × 1 3.5mm analog audio output × 1 Embedded Audio Monitoring 2-ch meters with alert M-1093H supports SDI-2ch / HDMI-2ch embedded audio meters and Analog 2-ch audio meters display, with marks and audio abnormal alert info. The audio meter pattern position can be selected from one of four corners, and the scale markers, alert info, and translucent of the audio meter pattern are selectable. UMD and Text-Tally Display TSL 3.1 / 4.0 Protocol M-1093H supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor. Peaking, R/G/B/Mono only, Zebra, False colour Timecode, H/V delay, AFD, Scale Markers USB Firmware Upgrade The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into M-1093H monitor to upgrade, without PC connection. 3-colour TALLY Light RJ45(RS485) input signal There are front TALLY lights of Red, Green and Yellow colours on each screen, and users can define the pins of RJ45 port to control the TALLY lights. Power Supply: M-1093H provides a 4-pin XLR socket of DC 6.5-24V power input, for the both 2 screens, and an AC-DC adaptor is attached on the rear panel of the monitor. Installation: M-1093H is standard 19” rack mount fixing, occupies 4U height. The monitor is ±30° up and down rotatable when installed on racks. Key Features: 9-inch IPS LCD Panel ×2 1920×1200 resolution, 800:1 contrast 19-inch 4U rack mounting, ±30° rotatable 2K/3G/HD/SD-SDI, HDMI, CVBS monitoring 2-ch Embedded audio meters with alert AFD, H/V delay, R/G/B/Mono, False colour TSL UMD and text TALLY display Zebra stripes, Peaking focus assist SDI timecode display Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 TALLY light and GPI control USB firmware upgrade  

SWIT M-1093F 2x9" Rackmount IPS LCD Panel, Waveform

SWIT M-1093F 2x9" Rackmount IPS LCD Panel, Waveform M 1093F M1093F M-1093F M/1093F Dual 9-inch Full HD SDI/HDMI Waveform Rack LCD Monitor The M-1093F adopts 2× 9-inch IPS (In-Plane Switching) LCD panels, with Full HD 1920×1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170° / Vertical: 170°. Input/ Output Interfaces - SDI / HDMI / CVBS / Analog Audio Each LCD of M-1092H supports: 2K/3G/HD/SD-SDI input × 2 2K/3G/HD/SD-SDI loop output × 2 HDMI 1.3 input × 1 HDMI 1.3 loop output × 1 CVBS input × 1 CVBS loop output × 1 3.5mm analog audio input × 1 3.5mm analog audio output × 1 Video Analysis Assistant Pattern - Waveform / Vector scope / Histogram M-1093F supports video analysis assistant patterns includes: Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma, Colour, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position (Up/Down/Left/Right), size, colour, and translucence. Embedded Audio Monitoring - Up to 16-ch meters with alert and select output The M-1093F supports SDI-16ch and HDMI-8ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable. UMD and Text-Tally Display - TSL 3.1 / 4.0 Protocol The M-1093F supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor. Peaking, R/G/B/Mono only, Zebra, False colour Timecode, H/V delay, AFD, Scale Markers USB Firmware Upgrade The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into M-1093F monitor to upgrade, without PC connection. 3-colour TALLY Light - RJ45(RS485) input signal There are front TALLY lights of Red, Green and Yellow colours on each screen, and users can define the pins of RJ45 port to control the TALLY lights. Power Supply The M-1093F provides a 4-pin XLR socket of DC 6.5-24V power input, for the both 2 screens, and an AC-DC adaptor is attached on the rear panel of the monitor. Installation M-1093F is standard 19” rack mount fixing, occupies 4U height. The monitor is ±30° up and down rotatable when installed on racks. Key Features: 1920×1200 resolution, 800:1 contrast 19-inch 4U rack mounting, ±30° rotatable 2K/3G/HD/SD-SDI, HDMI, CVBS monitoring 16-ch Embedded audio meters with alert Select any 2 audio channels to output Waveform Y/Cb/Cr/R/G/B and single line Vector scope, histogram R/G/B/Y AFD, H/V delay, R/G/B/Mono, False colour TSL UMD and text TALLY display Zebra stripes, Peaking focus assist SDI timecode display Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 TALLY light and GPI control USB firmware upgrade  

SWIT M-1073H 2x7" Rackmount LCD Panel

SWIT M-1073H 2x7" Rackmount LCD Panel M 1073H M1073H M-1073H M/1073H 7-inch Full HD LCD TFT panel with LED backlight The M-1073H adopts dual 7-inch LCD panels with LED backlight, The native resolution is Full HD 1920×1200, contrast 1000:1, and viewing angle is Horizontal: 160° / Vertical: 160° Input/Output Interfaces 3G-SDI、4K-HDMI Each LCD of M-1073H supports: 2K/3G/HD/SD-SDI input × 2 2K/3G/HD/SD-SDI loop output × 1 HDMI 2.0 (4K60p) input × 1 HDMI 2.0 (4K60p) loop output × 1 3.5mm SDI/HDMI embedded audio output 3DLUT Log to Rec709 User LUT cube import M-1073H monitor has built-in camera logs to Rec 709 conversion LUTs, including Log-C, C-log, S-log2， S-log3, V-log, J-log1, RedLogFilm. You can also import own 3DLUTs to monitor by USB stick, support 17x17x17 3DLUT cube files. Embedded audio monitoring Up to 16-ch meters with alert and select output M-1073H supports SDI-16ch and HDMI-2ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audiometer pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audiometer pattern are selectable. Peaking, R/G/B/Mono only, Zebra, False colour Timecode, H/V delay, AFD, Scale Markers On-screen Tally M-1073H supports on-screen TALLY display, and the TALLY control signal inputs via GPI(RS485) port on the rear panel of the monitor USB Firmware Upgrade The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into M-1073H monitor to upgrade, without PC connection. Power Supply M-1073H provides DC 6.5-24V power input socket, for the both 2 screens, and an AC-DC adaptor is attached on the rear panel of the monitor. Installation M-1073H is standard 19” rack mount fixing, occupies 3U height. The monitor is ±30° up and down rotatable when installed on racks. Input Video Formats M-1073H supports the following input video formats: HDMI 4096×2160p (60 / 50 / 30 / 25 / 24) 3840×2160p (60 / 50 / 30 / 25 / 24) 1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98) 1080i (60 / 59.94 / 50) 720p (60 / 59.94 / 50) 480i/ 576i / 480p / 576p SDI SMPTE 2048-2: 2048×1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98), 2048×1080i (60 / 59.94 / 50） SMPTE-425M: 1080P (60 / 59.94 / 50) SMPTE-274M: 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98) SMPTE-RP211: 1080psf (30 / 29.97 / 25 / 24 / 23.98) SMPTE-296M: 720p (60 / 59.94 / 50) SMPTE-125M: 480i (59.94) ITU-R BT.656: 576i (50) Key Features: Dual 7” non-glaring LCD, 1920×1200 19-inch 3U rack mount, ±30° rotatable 2K/3G/HD/SD-SDI input & loop output HDMI 2.0 (4K60p) input & loop output 16-ch embedded audio meters with alert Select any 2 audio channels to output 9 steps quick zoom-in and mapping Focus assist with precision adjustment Build-in multi-camera logs to Rec.709 User 3DLUT cube file import by USB On-screen TALLY display and GPI Zebra stripes, False color, R/G/B/Mono H/V delay, AFD, Timecode display Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 USB firmware upgrade  

SWIT S-1093F 9-inch On camera LCD monitor, no plate

SWIT S-1093F 9-inch On camera LCD monitor, no plate S 1093F S1093F S-1093F S/1093F 9-inch Full HD LCD IPS panel with LED backlight The S-1093F adopts a 9-inch IPS (In-Plane Switching) LCD panel, with Full HD 1920×1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170° / Vertical: 170° LCD Protective Glass The LCD of S-1093F is overlaid with a glass, protects the screen against scratch or broken. Input/Output Interfaces, SDI / HDMI / CVBS / Analog Audio S-1093F monitor supports: 2K/3G/HD/SD-SDI input × 2 2K/3G/HD/SD-SDI loop output × 2 HDMI input × 1 HDMI loop output × 1 CVBS input × 1 CVBS loop output × 1 3.5mm analog audio input × 1 3.5mm analog audio output × 1 Video Analysis Assistant Pattern, Waveform / Vector scope / Histogram S-1093F supports video analysis assistant patterns includes: Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma, Colour, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position (Up/Down/Left/Right), size, colour, and translucence. Embedded audio monitoring Up to 16-ch meters with alert and select output S-1093F supports SDI-16ch and HDMI-8ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable. UMD and Text-Tally Display, TSL 3.1 / 4.0 Protocol   S-1093F supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor.

Swit S-1071HPlus 7inch Studio LCD Monitor

Swit S-1071HPlus (S/1071HPlus, S_1071HPlus, S1071HPlus, S 1071HPlus) 7inch Studio LCD Monitor The S-1071H+ adopts a 7-inch FFS-IPS LCD panel, with 1024×600 high resolution and LED backlight, 900:1 contrast, 8-bit colour depth, and a H/V 160° viewing angle. Input/Output Interfaces SDI / HDMI / CVBS / Analog Audio S-1071H+ monitor supports: 2K/3G/HD/SD-SDI input × 1 2K/3G/HD/SD-SDI loop output × 1 HDMI input × 1 HDMI loop output × 1 CVBS input × 1 CVBS loop output × 1 RCA analog audio input L×1 R×1 RS232 GPI/TALLY input × 1 Embedded audio monitoring 2-ch meters with alert The S-1071H+ supports SDI-2ch / HDMI-2ch embedded audio meters and Analog 2-ch audio meters display, with marks and audio abnormal alert info. The audio meter pattern position can be selected from one of four corners, and the scale markers, alert info, and translucent of the audio meter pattern are selectable. UMD and Text-Tally Display TSL 3.1 / 4.0 Protocol S-1071H+ supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor. USB Firmware Upgrade The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into S-1071H+ monitor to upgrade, without PC connection. Front & Rear TALLY Light There are front and rear TALLY lights of Red, Green and Yellow colors, and users can define the pins of RS232 port to control the TALLY lights. Multiple Power Sources The monitor provides a 4-pin XLR socket of DC 6.5-17V power input, and can be fixed on V-mount, Gold mount or DV battery plate. Various types of DV battery plates are provided for optional, with snap-on designed, quick released and interchangeable with each other. Plate Compatible batteries S-7004A Gold mount batteries S-7004S V-mount batteries S-7004F SONY NP-F970/770 S-7004U SONY BP-U60/U30 S-7004D Panasonic D54/D28 Panasonic VW-VBD58, AG-VBR59 S-7004B Panasonic VW-VBG6 S-7004V JVC BN-VF823 S-7004I SSL-JVC50 S-7004C Canon BP-945/970G S-7004E Canon LP-E6 Sun Hood For outdoor using, you can apply a sun hood on the monitor. The sun hood can be easily installed via the left and right screw threads, or directly by Velcro tapes. The sun hood is provided in the monitor package.  Key Features: 7” FFS-IPS LCD, 1024×600, H/V 160°viewing 2K/3G/HD/SD-SDI, HDMI, CVBS monitoring 2-ch Embedded audio meters with alert AFD, H/V delay, R/G/B/Mono, False colour TSL UMD and text TALLY display Zebra stripes, Peaking focus assist SDI timecode display Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 Front / Rear TALLY light and GPI control V-mount, Gold mount or snap-on DV mount USB firmware upgrade  

SWIT CM-S73H 7" Super Bright 3000nits 4K Monitor

SWIT CM-S73H 7" Super Bright 3000nits 4K Monitor CM S73H CMS73H CM-S73H CM/S73H Swits New CM-S73H 7" Full HD (1920 x 1080) monitor has 3000 nits of brightness. The monitor is based around Swit’s existing S-1073H, with the brightness increasing by a generous 525%. Display aids include R/G/B/Mono only, zebra, and false colour. The monitor features built-in camera logs to Rec 709 conversion LUTs, including Log-C, C-log, S-log2, S-log3, V-log, J-log1, RedLogFilm. You can also import own 3DLUTs to monitor by USB stick (support 17x17x17 3DLUT cube files). The CM-S73H also boasts embedded audio monitoring of up to 16-ch meters with alerts and a select output. You can also select any 2 channels audio to output via 3.5mm socket or speakers. The audiometer pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audiometer pattern are selectable. 7-inch 3000nit Super Bright PQ/HLG/S-log3 HDR capable The CM-S73H adopts a 7-inch super high bright LCD, the Max brightness is 3000nit, viewable under sunlight, and support PQ, HLG, S-log3 HDR display. The native resolution is Full HD 1920×1200, contrast 1200:1 Input/Output Interfaces 3G-SDI, 4K-HDMI CM-S73H monitor supports: 2K/3G/HD/SD-SDI input × 2 2K/3G/HD/SD-SDI loop output × 1 (loop SDI IN1 only) HDMI 2.0 (4K60p) input × 1 HDMI 2.0 (4K60p) loop output × 1 3.5mm SDI/HDMI embedded audio output 3DLUT Log to Rec709 User LUT cube import CM-S73H monitor has built-in camera logs to Rec 709 conversion LUTs, including Log-C, C-log, S-log2， S-log3, V-log, J-log1, RedLogFilm. You can also import own 3DLUTs to monitor by USB stick, support 17x17x17 3DLUT cube files. Embedded audio monitoring Up to 16-ch meters with alert and select output Peaking, R/G/B/Mono only, Zebra, False Colour Timecode, H/V delay, AFD, Scale Markers CM-S73H supports SDI-16ch and HDMI-2ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable. On-screen Tally CM-S73H supports on-screen TALLY display, and the TALLY control signal inputs via GPI(RS485) port on the rear panel of the monitor. USB Firmware Upgrade The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into CM-S73H monitor to upgrade, without PC connection. Input Video Formats CM-S73H supports the following input video formats: HDMI:  4096×2160p (60 / 50 / 30 / 25 / 24) 3840×2160p (60 / 50 / 30 / 25 / 24) 1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98) 1080i (60 / 59.94 / 50) 720p (60 / 59.94 / 50) 480i/ 576i / 480p / 576p SDI:  SMPTE 2048-2:2048×1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98) 2048×1080i (60 / 59.94 / 50) SMPTE-425M-A/B:1080P (60 / 59.94 / 50) SMPTE-274M:1080i (60 / 59.94 / 50),  1080p (30 / 29.97 / 25 / 24 / 23.98) SMPTE-RP211: 1080psf (30 / 29.97 / 25 / 24 / 23.98) SMPTE-296M: 720p (60 / 59.94 / 50) SMPTE-125M: 480i (59.94) ITU-R BT.656:576i (50)  Audio Meter Level With alert info and select any 2 channels to output The audio meters support audio abnormal alert info display, for example if the channel has no audio signal, the audio meter position will display “UNLOCKED”, and if the channel has audio signal but no volume, it will display “MUTE”. The audio meters can be selected to display only 2 channels or only 8 channels, and support alert info on/off switch, markers on/off switch, and display position can be selected from 4 corners, also the translucence of the pattern can be adjusted. USB firmware Upgrade Operation Steps Download latest firmware files (including Driver and Kernel) in USB disk - root directory. Switch on the monitor, and insert USB disk into the monitor. Enter Main Menu – System – Update Kernel, select YES and the monitor will upgrade automatically, and will restart when upgrade finished. Enter Main Menu – System – Update Driver, select YES and the monitor will upgrade automatically, and will restart when upgrade finished. Please DO NOT cut off power during firmware upgrade. It is suggested that you could connect both AC-DC adaptor and battery. GPI Pin Definition The RJ45(RS485) port on the rear panel supports UMD control and GPI functions setting and control. There’re 4 GPI pins and can be assign the following functions, by shorting with GND pin to enable the functions. Key Features: 7” non-glaring LCD, 1920×1200 resolution 3000nit super high bright HDR capable: PQ / HLG / S-log3 2K/3G/HD/SD-SDI input & loop output HDMI 2.0 (4K60p) input & loop output 16-ch embedded audio meters with alert Select any 2 audio channels to output 9 steps quick zoom-in and mapping Focus assist with precision adjustment Build-in multi-camera logs to Rec.709 User 3DLUT cube file import by USB On-screen TALLY display and GPI Zebra stripes, False colour, R/G/B/Mono H/V delay, AFD, Timecode display Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 V/Gold mount or various DV plates option USB firmware upgrade