Shape V-mount pivoting battery plate for Canon C70

SH-VBC70 SHVBC70 SH VBC70 SH/VBC70 Shape V-mount pivoting battery plate for Canon C70 SHAPE VBC70 Pivoting Battery Plate for Canon C70 (V-Mount) The SHAPE V-Mount pivoting battery plate for CANON C70 attaches to the rear of the top plate (C70TP) and supports a V-mount battery while leaving access to the camera’s standard battery compartment. Our V-mount battery plate provides the right battery voltage and amperage to use with your CANON C70 camera. By pivoting the battery plate, you have access to the battery of the camera and also allows hot-swap features. A swivel system let you pivot the battery plate up and down. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. It connects to the camera using the SHAPE 14.4 output D-Tap power cable for Canon C70. The cable regulates the voltage from a D-Tap source to the proper 14.4 V required to power your Canon C70 camera. This allows you to power your camera using any V-mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm). A universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide easy access to the rear screen.

Shape Sony FX6 Gold Mount pivoting battery plate

SH-GBFX6 SHGBFX6 SH GBFX6 SH/GBFX6 Shape Sony FX6 Gold Mount pivoting battery plate The SHAPE Gold Mount pivoting battery plate for Sony FX6 attaches to the rear of the top plate (FX6TP) and supports a Gold Mount battery while leaving access to the camera’s standard battery compartment. Our Gold Mount battery plate provides the right battery voltage and amperage to use with your Sony FX6 camera. By pivoting the battery plate, you have access to the BPU battery of the camera and also allows hot swap feature. A swivel system lets you pivot the battery plate up and down. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. It connects to the camera using the SHAPE 19.5V output D-Tap power cable for Sony FX6. The cable regulates the voltage from a D-Tap source to the proper 19.5 V required to power an FX6 camera. This allows you to power your camera using any Gold Mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm). A universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide easy access to the rear connector and have access to the BPU battery.

Shape Sony FX9 push-button view finder mount

SH-FX9VF SHFX9VF SH FX9VF SH/FX9VF Shape Sony FX9 push-button view finder mount Sony FX9 Push-Button Viewfinder Mount.

Shape 15mm LW to 19mm studio snap-on adapter

SH-BL19A SH BL19A SHBL19A SH/BL19A Shape 15mm LW to 19mm studio snap-on adapter SHAPE BL19A (BL-19-A) 15mm LW to 19mm Studio Snap-On Adapter. Designed to adapt 15mm lightweight accessories to 19mm studio spaced rods. Comes with a 19mm Studio offset Rod Clamp and a 15mm lightweight adapter spaced rods. Snap-On design enabling you to attach the support Snaps onto 19mm studio rods without having to remove other rod-mounted accessories. 15mm rod posts for attaching LW 15mm accessories like our Follow Focus(FFPRO). Left side of the clamp designed with 1x Anti-Twist 3/8"-16 accessory mounts. Made with a durable CNC Machined Aluminium and stainless-steel construction.

SHAPE Matte Box (swing-away)

SH-AKSWA SH AKSWA SH/AKSWA SHAKSWA SHAPE Matte Box (swing-away) A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses.Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed.Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on).

Shape Matte Box (clip-on)

SH-AKSCL SH AKSCL SHAKSCL SH/AKSCL SHAPE Matte Box (clip-on) A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses. Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. Removable light carbon fiber french flag can be attached on top to prevent flares. A series of adapter rings are included in the kit

Shape V-Mount Plate for Canon C300 Mark II

Shape SH-UMPCII (SH/UMPCII, SH UMPCII, UMPCII, sh-umpcii) V-Mount Plate for Canon C300 Mark II Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Canon C300 Mk II Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and four plate-mounting screws are included with the plate.

Shape Follow Focus Kit with Single 15mm Rod Clamp

Shape SH-FA123 (SH/FA123, SH_FA123, SHFA123, SH FA123) Follow Focus Kit with Single 15mm Rod Clamp Use the compact SHAPE Follow Focus Kit with Single 15mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheel attached to a single aluminum 15mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. Modular design allows for addition and removal of components without tools or screws. Its compact size allows it to fit easily with lens accessories like a matte box. The rubber follow focus wheel is attached to an adjustable, aluminum 15mm rod clamp which can swing away when changing lenses. The focus wheel fits most lens sizes. Five drive gears are included: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. A rubber friction wheel is included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. An 11" whip and a speed crank are included. Each connects to the focus wheel for fine adjustments. Four magnetic marking disks are included to attach to the focus wheel.    

Shape Delta Marbel Quick Release Kit

Shape SH-DELTAQUICK (SHDELTAQUICK, SH/DELTAQUICK, SH DELTAQUICK, DELTAQUICK, sh-deltaquick) Delta Marbel Quick Release Kit The SHAPE Delta Marbel Quick Release Kit includes a V-lock delta quick release plate and V-lock delta quick release adapter that you can use to quickly mount any camera to any support platform. Featuring one 1/4"-20 thread and one 3/8"-16 thread, the quick release plate can be attached to the camera platform of any tripod or video rig. The quick release adapter features two 1/4" holes, attaches on the bottom of your camera, and allows quick release mounting/dismounting on and off the plate. A simple push of a release button on the side of the quick-release plate releases the adapter and allows you to remove your camera. The plate supports loads up to 50 lb. All the necessary screws are supplied. The adapter attaches to your camera along with an included, thin camera plate. The camera plate has stoppers on the back that will keep the camera from twisting sideways. The camera plate and stoppers are both adjustable to support different-size cameras, and the stoppers can be removed completely to make room for full-size cameras. An alignment screw is included to secure the camera plate in place. The quick release adapter is also compatible with third party V-lock delta plates, such as the Sony VCT-U14.

Shape SH-ALEXVM V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXVM (SH_ALEXVM, SHALEXVM, SH/ALEXVM, SH ALEXVM) V-Mount Battery Plate for ARRI ALEXA Mini Camera Our V-Mount battery plate provides the right battery voltage and amperage to use with your ALEXA Mini camera.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input. Additional accessories can also be powered off the P-Tap port.

Shape SH-ALEXGM Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXGM (SH_ALEXGM, SHALEXGM, SH/ALEXGM, SH ALEXGM) Gold Mount Battery Plate for ARRI ALEXA Mini Camera The Gold Mount ALEXA Mini Battery Plate is perfect to power your ALEXA Mini camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input and provides the necessary amount of power to the camera.

Shape SH-CPVRD Cheese Plate and V-Mount Battery Plate for RED Camera

Shape SH-CPVRD (SH_CPVRD, SHCPVRD, SH/CPVRD, SH CPVRD) Cheese Plate and V-Mount Battery Plate for RED Camera This item features a Cheese Plate and a V-Mount Battery Plate to power your RED camera.  The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the RED’s power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape Cheese Plate and Gold Mount Battery Plate for RED Camera

Shape SH-CPGRD (SH_CPGRD, SHCPGRD, SH/CPGRD, SH CPGRD) Cheese Plate and Gold Mount Battery Plate for RED Camera This item features a Cheese Plate and a Gold Mount Battery Plate to power your RED camera.  The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the RED’s power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.  

Shape Gold Mount Battery Plate for RED Camera

Shape SH-REDGM (SH_REDGM, SHREDGM, SH/REDGM, SH REDGM) Gold Mount Battery Plate for RED Camera The Gold Mount RED Battery Plate is perfect to power your RED camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the RED's power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II

Shape SH-CP300M2 (SHCP300M2, SH/CP300M2, SH CP300M2, CP300M2, sh-cp300m2) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a ROD BLOC for Mounting. Perfect to Mount any accessories such as; Shape MAGIC ARM, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC LEMO cable with the standard output voltage for C300 Canon Mark II series cameras.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras

Shape SH-CP300 (SHCP300, SH/CP300, SH CP300, CP300, sh-cp300) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a Rob Bloc for mounting. Perfect to mount any accessories such as; Shape Magic Arm, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC Lemo cable with the standard output voltage for C300 Canon Mark II series cameras.  

Shape Canon C-Series Grip Relocator Inc. Extension Cable

Shape SH-HAC300-RE (SHHAC300-RE, SH/HAC300-RE, SH HAC300-RE, HAC300-RE, sh-hac300-re) Canon C-Series Grip Relocator Inc. Extension Cable The unique design of the C-300 bracket allows the user to remove the C-300 handle from the camera body in order to use with the ball and socket part of SHAPE DOUBLE QUICK HANDLE ROSETTE. By removing the rubber handle off the DOUBLE QUICK HANDLE ROSETTE, you can insert the C-300 bracket and secure it by tightening it with an Allan Key. When installed on the handle, the user has access to several functions available on the C300 handle such as; trigger on/off control, zoom, main menu, lens aperture control and many more! The user also has access to the unique SHAPE red-push button technology that can rotate individually on a 360 degree axis.

Shape V-Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5

Shape SH-CPVEVA (SHCPVEVA, SH/CPVEVA, SH CPVEVA, CPVEVA, sh-cpveva) V-Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5 The V-Mount Battery Cheese Plate from SHAPE features a cheese plate and a V-mount battery plate to power your Panasonic AU-EVA1, Sony FS7, or FS5 cameras. The cheese plate is designed with a 15mm Rod Bloc system with one ratchet knob for quickly fixing the plate to your camera rig. The included 22" regulated D-Tap cable can connect to the ALEXA Mini's power input.

Shape Canon C100 C300 C500 Shoulder Mount

Shape SH-C300SM (SHC300SM, SH/C300SM, SH C300SM, C300SM, sh-c300sm) Canon C100 C300 C500 Shoulder Mount The Canon C100 C300 C500 Shoulder Mount from SHAPE is a shoulder rig with light weight support (LWS) for the Canon Cinema EOS line of movie cameras. As the three have a similar profile, this rig is compatible with the C100, C300, and C500 models. The base plate features specially recessed rods to accommodate the these cameras' uniquely tall stature while ensuring proper centering of lenses in case a matte box is used. The system includes 15mm rods with the standard LWS spacing of 60mm. Because rod-based accessories are standardized you can use virtually any 15mm accessories for LWS you want with this rig. Types of accessories include, follow focuses, matte boxes, mounts for external audio and video recorders, EVFs, battery plates, cages, and more. The included rods are 18" in length and can be extended if needed. Handles and a shoulder pad allow you to use the Canon C100 C300 C500 Shoulder Mount on a tripod or hand-held. The handles feature rosettes and spring-loaded push-buttons so that the angle can be adjusted on the fly without having to loosen a screw. Both the hand grips and the shoulder pad clamp onto the rods using a single red knob that ratchets in case you can't turn it a full circle. Extension rods can be added behind the shoulder pad for attaching weights, battery plates, or other accessories intended for behind the camera or to help balance the load.

Shape CP33 Cheese Plate with IDX Plate

Shape SH-CP33IDX (SH_CP33IDX, SHCP33IDX, SH/CP33IDX, SH CP33IDX) CP33 Cheese Plate with IDX Plate The Shape CP33 Cheese Plate with IDX Plate is a 15mm rod-mount cheese plate with an IDX V-Mount battery plate screwed onto one side. The plate is 1/4" thick and features 33 threaded holes for accessories to be screwed into. These holes run end to end, from one side of the plate to the other. Four of the holes are 10/32" and the rest are 1/4" and 3/8". The IDX plate covers many of the holes from one side, but you can still screw into these holes from the other side as long as the screws are not much longer than the 1/4" thickness of the plate. The holes at the very corners of the plate are untouched by the IDX plate and can be used to attach accessories or devices like AJA's Ki Pro Mini. Screws are included for a Ki Pro Mini and for an Anton Bauer battery plate. The cheese plate is precision-machined as one piece.

Shape Follow Focus Pro

Shape SH-FFPRO (SH_FFPRO, SHFFPRO, SH/FFPRO, SH FFPRO) Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Shape Follow Focus Pro Full Kit

Shape SH-FFPROKIT (SH_FFPROKIT, SHFFPROKIT, SH/FFPROKIT, SH FFPROKIT) Follow Focus Pro Full Kit The Shape Follow Focus Pro Full Kit is a dual-sided follow focus system that mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Attach the included extension to add a second focus-wheel for dual-sided control or remove it for single-sided operation. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Both focus wheels feature a removable marking disc, adjustable hard stops, and standard accessory port for using optional whips or cranks.