Movcam MOV-301-0205-09 Rubber Bellows Step-Down Ring (156 to 144mm)

Movcam MOV-301-0205-09 (MOV 301-0205-09, MOV/301-0205-09, MOV301-0205-09, 301-0205-09) Rubber Bellows Step-Down Ring (156 to 144mm). The Movcam Rubber Bellows Step-Down Ring (156 to 144mm) attaches directly to a 156mm matte box, providing a step-down to fit a 144mm lens. It is compatible with the MM5 matte box.

Movcam MOV-303-2407 Twist Handle for Select Cages

Movcam MOV-303-2407 (MOV303-2407, MOV 303-2407, 303-2407, MOV/303-2407) Twist Handle for Select Cages. The Movcam Twist Handle is a quick-release top handle designed for use with Movcam's GH5 and a7 II-series camera cages, attaching to the cage via an included short NATO rail. Once attached, the handle can be rotated by loosening a top thumbscrew, letting you set the desired grip angle/position. Tightening the screw locks the handle in place. For accessory mounting, the handle features 1/4"-20 and 3/8"-16 threaded mounting holes, a single 15mm rod port, and two shoe mounts (one in front and one in back of handle).

Movcam MOV-302-0205 Studio Follow Focus

Movcam MOV-302-0205 (MOV 302-0205, MOV/302-0205, 302-0205, MOV302-0205) Studio Follow Focus. The Movcam Studio Follow Focus is a dual-sided follow focus system for cine cameras such as the RED, Alexa and F65. It comes with many accessories that provide wide flexibility in all areas of pulling focus. Three Swing Arms and five Pitch Gears are included to accommodate different lens constructions and different gear ratios. Instead of sliding the entire system closer to a lens, you would just attach the appropriate Pitch Gear onto the applicable Arm and drop the Arm onto the focusing ring of the lens, and the teeth of the Gear will connect with the teeth of the lens. The three Arms come at speed ratios of 1x, 1.5x, and 2x, and the five Gears at gear drives of .5, .6 and at three variations of .8. All five Gears are compatible with Canon and Fujinon video lenses. Two Handwheels are included along with a marking disk for each. Having two wheels provides a few conveniences, such as allowing an assistant to pull focus from the other side of the camera when one side is obstructed. A 12" focus Whip and a mini focus Lever are part of the system and make pulling focus easier for both the assistant and the camera operator. Both the Whip and the Lever can connect into either Handwheel. The Whip allows an assistant to pull focus from 12 inches away, and the Lever lets the camera operator gently use just one finger to pull focus. A removable Wheel Extension that attaches to the Base on one end and to a Handwheel on the other end serves to push the Handwheel out a bit, clearing space between the Handwheel and the Base for lenses that require more space, such as lenses with larger barrels. The system comes with both a 15mm Rod Bridge and a 19mm Bridge and can thus be mounted onto either standard-size 15mm rods or onto 19mm studio rods. Cine Camera Follow Focus System Dual-sided follow focus with two Handwheels and marking disks Includes three detachable Swing Arms for different degrees of rotation Five Pitch Gears attach onto the Swing Arms for different lens gear ratios Comes with 15 and 19mm Rod Bridges for use with standard and studio rods A Wheel Extension pushes out a Handwheel to make room for large barrel lenses A 12" Whip lets an assistant conveniently pull focus / a small focus lever lets the operator do the same

Movcam MOV-301-0205 Mattebox MM5 (2 Rotating Filter Holder)

Movcam MOV-301-0205 (MOV 301-0205, MOV/301-0205, 301-0205, MOV301-0205) Mattebox MM5 (2 Rotating Filter Holder). The Movcam MOV-301-0205 Mattebox MM5 features a 156mm rear opening and is compatible with lenses up to 14mm (35mm academy). It is equipped with a 16:9 carbon fiber housing, a French flag and side wings for light control, one fixed and two rotating 5.65 x 5.65" filter holders, a 15:19mm bridge plate adapter and a 15mm mini swing-away bracket, and with a 156:114 rubber bellows that can optionally be stepped down. The swing-away bracket provides industry-standard 15mm rod support and the bridge plate adapter offers 19mm rod support.

Movcam MOV-501-101-02-01 Control Cable for MRS-1 to Sony F5, F55

Movcam MOV-501-101-02-01 (MOV501-101-02-01, MOV 501-101-02-01, 501-101-02-01, MOV/501-101-02-01) MOV-501-101-02-01 Control Cable for MRS-1 to Sony F5, F55. The Control Cable from Movcam is to be used for Start / Stop REC control for the Sony F5/F55 from the SCU-1 or MCS-1.

Movcam MOV 501 102 Single-Axis Wireless Lens Control System

Movcam MOV 501 102(MOV-501-102, MOV_501_102, MOV/501/102) Single-Axis Wireless Lens Control System 33% OFF Selected Wireless Lens Controller   Offer Ends 31st March 2018 OR Whilst stocks last For remote focus control Movcam's Single-Axis Wireless Lens Control System provides wireless or wired control of your lens. Designed as a modular system, it is available as either a single or dual axis system, with the single axis system upgradeable by purchasing additional modules. The system features OLED information screens that are visible both indoors and out, and automatic lens calibration.   The focus controller/transmitter incorporates a slot that accepts NP-F550 and F570 type batteries internally (batteries not included.) Although the system has a wireless range of about 90' indoors and over 650' outdoors, you can connect an included cable to hardwire the focus controller to the motors. The motor is powered via an included D-Tap cable and features an integrated 15 to 19mm rod clamp. Each motor ships with a replaceable 0.8 MOD cine-style gear. The system can control record stop/stop for select RED, Canon, Sony, Arri, and Blackmagic Design cameras (requires optional cables, not included.) In the BOX SCU-1 (501-102-01) UM-1 (501-101-05) MRS-1 (501-101-02) RCM-1 (501-01-07) PWD-1 (501-01-08) CRL-1 (501-01-09) Carry Case