TILTA HDA-SRK Speed Rail Car Mounting Kit

TILTA HDA-SRK (HDA/SRK, HDA_SRK, HDASRK, HDA SRK) Speed Rail Car Mounting Kit Arm your vehicle with the Speed Rail Car Mounting Kit designed for the Hydra Predator and other car mounted shock absorbing arms! This kit allows you to build custom speed rail rigs to support various shock absorbing arms in multiple configurations. The kit is built around 6 pieces of speed rail, of two different sizes, that can be used on their own or interconnected to create longer pieces for specific rigging needs. The 4 adjustable mounting clamps allow you to connect the speed rail in almost any configuration. The kit includes 4 high capacity suction cups, each individually rated for 50 kg or around 110lbs. These suction cups connect to the speed rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily. Utilizing 4 suction cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment. The included Front Tow Hook Adapter allows you to connect the system to any vehicle that already has that mounting point. which helps create a secure connection that relies on more than just suction.

TILTA GSS-T01-V Float Handheld Gimbal Support System

TILTA GSS-T01-V (GSS/T01-V, GSS/T01/V, GSST01V, GSS T01 V) Float Handheld Gimbal Support System The Tilta Float System works in conjunction with the DJI RS 2 and RS3 Pro to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups. The counterweight-based post provides further stabilization for your setup beyond what the gimbal is already doing to allow for the smoothest possible free flowing camera movement imaginable. The spring-loaded arm and support vest design puts the weight of the rig onto your torso, allowing for longer operating times before the user gets fatigued. The included Wireless Thumb Controller allows you to wirelessly control the Ronin as well as a Nucleus M or Nucleus Nano follow focus motor. This unit is designed to be mounted to the yoke of your Tilta Float via the system’s Monitor Bracket. The Controller powers via Go Pro 5-8 Batteries and features a USB-C port that can be used for future firmware updates. Please note we do not recommend powering the unit via this port. The included Lower Back Support and Single Shoulder Strap provides additional weight distribution ensuring comfortable operation over any duration. Multiple power options provide more flexibly when powering the Ronin. The system can power the gimbal via Gold Mount, V-Mount, TB50, or the Battery Handle itself via optional accessories. *The Float is compatible with any gimbal under the weight limit that can mount via 1/4″-20 threads and can power via 2 Pin Lemo or an internal battery, however, it can only wirelessly control the RS2 and RS3 Pro* **The Float does not have power outputs other than the 2 Pin Lemo designed for powering the RS2** ***The Internal Post Cable can handle 14.8V and 3A with maximum ability to handle 6A***  

TILTA FF-T05 Single-sided Cine Follow Focus

TILTA FF-T05 (FF/T05, FF_T05, FFT05, FF T05) Single-sided Cine Follow Focus This single-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls. It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods. This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods such as matte boxes and lens supports. The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit. You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.

TILTA FF-T04-V2 Dual-Sided Follow Focus Kit

TILTA FF-T04-V2 (FF/T04-V2, FF/T04/V2, FFT04V2, FF T04 V2) Dual-Sided Follow Focus Kit This dual-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls. The dual-sided design allows you to adjust your lens’ focus from either side of the camera. It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods. This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods such as matte boxes and lens supports. The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit. You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.

TILTA FF-T03 Single-sided DSLR Follow Focus

TILTA FF-T03 (FF/T03, FF_T03, FFT03, FF T03) Single-sided DSLR Follow Focus This single-sided follow focus is designed to be used with DSLR cameras and other small camera rigs. It can be used with 15mm LWS rod setups. Two adjustable hard stops on the focus wheel to allow for accurate focus pulls. There’s also an adjustable damping knob so that you can adjust the hand wheel’s tension to your liking.  

TILTA ARM-T03 Armorman 3.0 Gimbal Support System

TILTA ARM-T03 (ARM/T03, ARM_T03, ARMT03, ARM T03) Armorman 3.0 Gimbal Support System The Armorman 3.0 was designed to offer comfort and support while operating your gimbal by transferring the weight of the gimbal to your body’s core, taking significant weight off your arms. This allows you to operate your gimbal comfortably, for a much longer period of time while not sacrificing flexibility or performance. Two mechanical arms with shock-absorbing stabilized systems attach to the back of the adjustable vest or on top of the vest in high mode. When engaged, the arms have two adjustable tension knobs on each arm to allow you to adjust the tension in relation to the weight of your gimbal rig as well as your preferred operation style. The arms attach to any top bar gimbal system or gimbal ring system with the provided mounts or support cups, which you attach by just sliding the attachment right into the arms. Paired with the Universal Gimbal Ring Adapters and Nucleus M, the Armorman 3.0 can become a single operator system. When you’re done operating, simply disengage the arms by pulling the release cords for each arm (in regular mode) and then comfortably rest them on the sides of the vest with the attached arm receiver. This allows you to keep the vest on in-between shots and then when you’re ready to operate again, simply re-engage the arms and re-attach the gimbal. Supports systems up to 50lbs and gimbals with 25mm or 30mm diameters including the Advanced & Basic Ring Grips.