Marshall VAC-12HUC HDMI to USB-C Converter

Marshall VAC-12HUC (VAC/12HUC, VAC_12HUC, VAC12HUC, VAC 12HUC) HDMI to USB-C Converter 10-bit input sampling makes a visible difference The VAC-12HUC converts HDMI 2.0 to USB-C (USB3.0/USB2.0) up to UHD 3840x2160p at 30fps. HDMI input has active loop-thru allowing the original high-quality source to be routed to monitors or other equipment as a pass thru. Common applications include live streaming, video conferencing and other PC or MAC-based applications. Power is supplied by the USB-C connection to the host computer reducing clutter and eliminating the need for an external power supply. The rugged and compact design makes for easy portability and mobility. The VAC-12HUC's simple plug-and-play design uses UVC protocol to enable itself as a Camera Device. UVC protocol allows the host computer to set the parameters for the USB stream such as resolution, frame rate and aspect ratio.

Marshall 2.8mm F1.6 10MP 4K UHD CS Mount Prime Lens

Marshall CS-2.8-10MP (CS/2.8-10MP, CS/2.8/10MP, CS2.810MP, CS 2.8 10MP) 2.8mm F1.6 10MP 4K UHD CS Mount Prime Lens The 10MP 2.8mmm f/1.6 Wide-Angle CS-Mount Manual Iris Lens from Marshall is an ultra-wide lens which features a fixed 2.8mm focal length. Compatible with 10MP sensors with a 1/1.8" image size and a CS mount, the lens is designed to deliver high-quality imagery. With an aperture of f/1.6, the lens allows for clear images in even low light conditions. The lens features manual iris and focus rings with a lock to avoid setting displacement after installation.  

Marshall 11-50mm F1.4 8MP 4K UHD CS Mount Auto-Iris Zoom Lens

Marshall CS-1150-8MP (CS/1150-8MP, CS/1150/8MP, CS11508MP, CS 1150 8MP) 11-50mm F1.4 8MP 4K UHD CS Mount Auto-Iris Zoom Lens The 8MP 11-50mm f/1.4 Varifocal CS-Mount Lens from Marshall is a varifocal lens which features a 11 to 50mm adjustable focal length. Compatible with cameras that have 8MP sensors with a 1/1.7" image size and a CS mount, the lens is designed to deliver high-quality imagery. With a maximum aperture of f/1.4, the lens allows for clear images in even low light conditions. The lens supports DC auto iris and with a lock for the manual zoom and focus control rings so you can avoid setting displacement after installation.    

Marshall Black Wall Mount Kit

Marshall CV-PTZ-WM (CV/PTZ-WM, CV/PTZ/WM, CVPTZWM, CV PTZ WM) Black Wall Mount Kit Mount your CV620, CV612HT-4K, CV620-IP PTZ, CV730-BK/WH, and CV730-NDI/NDIW PTZ camera onto a wall using this black Wall Mount from Marshall Electronics. The mount features cable pass-through holes on the wall side as well as beneath the camera. The camera mounts using a tray that slides into the wall mount and is secured by additional screws. The camera can be mounted upright or upside-down. A mounting hardware kit is included.  

Marshall 16-70mm F1.4 8MP 4K UHD C Mount Auto-Iris Zoom Lens

Marshall C-1670-8MP (C/1670-8MP, C/1670/8MP, C16708MP, C 1670 8MP) 16-70mm F1.4 8MP 4K UHD C Mount Auto-Iris Zoom Lens Marshall 16-70mm F1.4 8MP 4K UHD C Mount Auto-Iris Zoom Lens (AOV approx. 30-7°) is a varifocal lens which features a 16 to 70mm adjustable focal length. Compatible with cameras that have 8MP sensors with a 1/1.7" image size and a C mount, the lens is designed to deliver high-quality imagery. With a maximum aperture of f/1.4, the lens allows for clear images in even low light conditions. The lens supports DC auto iris and with a lock for each manual control ring (zoom and focus), you can avoid setting displacement after installation.  

Marshall 5-50mm F1.4 3MP CS Mount Auto-Iris Zoom Lens

Marshall VS-M550-5 (VS/M550-5, VS/M550/5, VSM5505, VS M550 5) 5-50mm F1.4 3MP CS Mount Auto-Iris Zoom Lens The 5-50mm F1.4 3MP CS Mount Auto-Iris Zoom Lens from Marshall Electronics is designed for use with 3MP cameras with 1/2.7" and 1/3" sensors, including Marshall Electronics' CV343, CV345, and CV365 camera models. The lens features a 51-6° horizontal field of view and an f/1.4 aperture. It is equipped with a DC auto iris as well as manual zoom and focus adjustments with lock screws.

Marshall 4MP CS Mount 2.8-12mm F1.4 Auto-Iris Zoom Lens

Marshall VS-M2812-4MP (VS/M2812-4MP, VS/M2812/4MP, VSM28124MP, VS M2812 4MP) 4MP CS Mount 2.8-12mm F1.4 Auto-Iris Zoom Lens Marshall Electronics 4MP 2.8-12mm f/1.4 Varifocal CS-Mount Lens can be attached to cameras with 4MP sensors with 1/2.7" image sizes for high-quality images. The lens has a 2.8 to 12mm adjustable focal length and a maximum aperture of f/1.4 for low-light scenarios. DC auto iris is supported as well as lockable manual focus and zoom to prevent setting displacement after the lens is attached. Its compact size ensures a lightweight design for minimal camera strain.  

Marshall Neutral Density Filter Caps for CV226 - 3 Pack

Marshall CV226-NDF (CV226/NDF, CV226_NDF, CV226NDF, CV226 NDF) Neutral Density Filter Caps for CV226 - 3 Pack Marshall Electronics CV226-NDF ND Filter Caps for CV226 Lipstick Camera, Pack of 3.

Marshall Neutral Density Filter Caps for CV503-WP - 3 Pack

Marshall CV503WP-NDF (CV503WP/NDF, CV503WP_NDF, CV503WPNDF, CV503WP NDF) Neutral Density Filter Caps for CV503-WP - 3 Pack Marshall Electronics CV503WP-NDF ND Filter Caps for Miniature Camera Pack of 3. The filter caps are a useful addition for applications in strong sunlight or bright illumination. Just as our eyes are dazzled when looking directly into the sun and only bright white is visible, the same applies to the sensor. The image is overexposed. As soon as we wear sunglasses, we see contrasts much sharper. The caps are screwed directly in front of the lenses. So they fulfill a similar effect. The brightness can be raised again by the shutter speed.  

Marshall CVM-22 1/4-20” Thread Pole/Tree Mount with Adjustable Strap

Marshall CVM-22 (CVM/22, CVM_22, CVM22, CVM 22, cvm-22) 1/4-20” Thread Pole/Tree Mount with Adjustable Strap Adjustable 1/4-20" camera mount designed to attach to poles, trees, and trussing with articulated boom arm and adjustable nylon strap. Great for both indoor and outdoor use, the reinforced boom arm enables versatile camera positioning and placement in hard-to-reach places.

Marshall CVM-4 Electronics Flexible Camera Arm with Mounting Threads

Marshall CVM-4 (CVM/4, CVM_4, CVM4, CVM 4, cvm-4) Electronics Flexible Camera Arm with Mounting Threads Designed for Marshall miniature and compact cameras, this Marshall Electronics Flexible Camera Arm is 8.25" long and swivel-adjustable at multiple points. It allows you to quickly and securely set your camera at a desired angle. Featuring a 1/4"-20 mounting screw on each end, the arm can be attached to various clamps and other supports that offer a matching 1/4"-20 thread. In combination with these optional supports, the arm can be used to secure your camera to various objects in your environment.

Marshall CV-PTZ-DCM Drop Ceiling Camera Support Bracket

Marshall CV-PTZ-DCM (CV/PTZ/DCM, CV_PTZ_DCM, CVPTZDCM, CV PTZ DCM, cv-ptz-dcm) Drop Ceiling Camera Support Bracket Mount your CV612, CV620, or CV630 PTZ camera on a drop ceiling with this Drop-Ceiling Mount from Marshall Electronics. The ceiling mount attaches to the frame of a drop ceiling with the included hardware mounting kit. Four screws are included to attach your PTZ camera onto the mount, and then you can configure your camera to flip the image to match the mounting style.

Marshall CV-PTZ-BOX Internal Wall Enclosure For PTZ Cameras

Marshall CV-PTZ-BOX (CV/PTZ/BOX, CV_PTZ_BOX, CVPTZBOX, CV PTZ BOX, cv-ptz-box) Internal Wall Enclosure For PTZ Cameras Mount your CV605, CV610, CV612, CV620, or CV630 PTZ camera within a wall opening with this In-Wall Box Enclosure from Marshall Electronics. The wall enclosure fits inside a cutout in the wall that measures 9.4 x 7.4 x 3.7", and the included mounting kit provides the hardware and tools to secure it into the wall. A camera mounting plate with a 1/4"-20 screw is included to mount your PTZ camera.

Marshall CV-PTZ-WMW White Wall Mount Kit

Marshall CV-PTZ-WMW (CV/PTZ/WMW, CV_PTZ_WMW, CVPTZWMW, CV PTZ WMW, cv-ptz-wmw) White Wall Mount Kit The white Wall Mount from Marshall Electronics is designed to mount the CV620, CV612HT-4K, CV620-IP PTZ, CV730-BK/WH, and CV730-NDI/NDIW PTZ cameras onto a wall. The mount features cable pass-through holes on the wall side as well as beneath the camera. The camera mounts using a tray that slides into the wall mount and is secured by additional screws. The camera can be mounted upright or upside-down. A mounting hardware kit is included.

Marshall CV-BATT-PAC Portable Camera Power Kit

Marshall CV-BATT-PAC (CV/BATT/PAC, CV_BATT_PAC, CV BATT PAC, CVBATTPAC, cv-batt-pac) Portable Camera Power Kit The Marshall CV-BATT-PAC Portable Camera Power Kit offers a simple and reliable solution for supplying Marshall Miniature and Compact cameras with portable battery-supplied power. The Kit includes a rugged, all-metal L-bracket with 1/4-20″ slot for use with all standard tripods, DSLR battery sled and Canon LP-E6 battery. Additionally, the CV-BATT-PAC also includes a battery charger.

Marshall CV355-10X Compact HD Zoom Block Camera with 4.7mm-47mm 10x Zoom Lens

Marshall CV355-10X (CV355/10X, CV355_10X, CV35510X, cv355-10x) Compact HD Zoom Block Camera with 4.7mm-47mm 10x Zoom Lens Marshall CV355-10X features 10x optical (12x digital) zoom block and flexible 3GSDI/HDMI simultaneous outputs with clear HD images up to 1920×1080 at 60fps. Remote adjust and match settings include Iris, WB, Exposure, Pedestal, and many more over long distances or during setup with capable Auto settings that track environmental fluctuations. Constructed with a durable aluminium alloy body, full-sized BNC and HDMI connections, locking I/O cable carrying RS485/Audio/Power, and side impact protection panels to secure cable connections. Featuring a wide range of HD selections in 1920x1080i (interlaced), 1920x1080p and 1280x720p (progressive). Choose between 60, 59.94, 50, 30, 29.97, 25, 24, 23.98 frames per second to capture any workflow or application in every region of the world.

Marshall CVM-16 Pro-Style Tripod Stand

Marshall CVM-16 (CVM_16, CVM/16, CVM 16) Pro-Style Tripod Stand  The CVM-16 Pro-Style Tripod Stand from Marshall Electronics is a 3-section support with an Arca-type compatible head that has a load capacity of 11 lb. Unlocking the leg's twist locks and extending the rapid column and legs, the tripod can reach a maximum height of 21". Also, splaying the legs out, the tripod has a minimum height 9", and it folds down to a compact and portable 13". Additionally, at the top of the legs, foam padding is provided for a comfortable grip while handling the tripod in colder environments.

Marshall CVM-9 Dual Suction Cup Glass Mount with Tilt Arm & 1/4-20” Thread Mount

Marshall CVM-9 (CVM/9, CVM_9, CVM9, CVM 9, cvm-9) Dual Suction Cup Glass Mount with Tilt Arm & 1/4-20” Thread Mount The Dual Suction Cup Glass Mount from Marshall Electronics features an adjustable tilt arm and swivel. It can be mounted on a car's exterior, window, or any smooth non-porous surface. Its 1/4"-20 ball mount and can be used for any action camera with 1/4"-20 threads.

Marshall CVM-7 7” Articulated Arm with 1/4-20” & Shoe-Mount Adaptors

Marshall CVM-7 (CVM/7, CVM_7, CVM 7, CVM7, cvm-7) 7” Articulated Arm with 1/4-20” & Shoe-Mount Adaptors Mount a camera, a monitor, or any other 1/4"-20-compatible accessory at nearly any angle with the 7" Marshall Electronics Articulating Locking Arm. Once you have your accessory positioned where you want it, twist the central lock knob to secure the arm's joints and hold it fast. Both ends of the arm terminate in 1/4"-20 threads, but using the included 1/4"-20 female and shoe-mount adapters, other mounting options are made available.

Marshall CVM-5 Universal 1/4"-20 Camera Clip Mount

Marshall CVM-5 (CVM/5, CVM_5, CVM5, CVM 5, cvm-5) Universal 1/4"-20 Camera Clip Mount The Universal 1/4"-20 Camera Clip Mount from Marshall Electronics is designed to support Marshall's miniature cameras. It easily mounts on the top edge of virtually all monitors and displays as well as dividing walls, and it provides a 1/4"-20 mounting screw for the camera. It can also be set up on a desktop free-standing.

Marshall CVM-2 1/4 inch -20 Male to Cold Shoe Adapter

Marshall CVM-2 (CVM/2, CVM_2, CVM2, CVM 2, cvm-2) 1/4 inch -20 Male to Cold Shoe Adapter Marshall CVM-2 is a 1/4"-20 male to cold shoe mount with finger turn assist.

Marshall V-PS12V-2.0A-U-L/C 12V VDC 2.0A Universal Power Adaptor with Lock

Marshall V-PS12V-2.0A-U-L/C (V/PS12V/2.0A/U/L/C, V-PS12V-2.0A-U-L-C, VPS12V2.0A-ULC, V_PS12V_2.0A_U_L_C, v-ps12v-2.0a-u-l/c) 12V VDC 2.0A Universal Power Adaptor with Lock The Marshall 12 VDC 2.0A Universal Power Adapter with Lock is compatible with and perfectly replaces the power supply that came with your Marshall CV-225/502/303/565/343/345/365/350 camera. It features a locking DC connector to prevent accidental kick outs. The AC adapter supports worldwide power standards and comes with US, UK, EU, and Australian AC power connectors. Universal power supply for use virtually anywhere in the world with AC powerThe locking connector helps prevent accidental kick outs

Marshall CV620-CABLE-07 8-Pin RS-232 to RJ-45 Adapter Cable

Marshall CV620-CABLE-07 (CV620/CABLE/07, CV620_CABLE_07, CV620CABLE07, CV620 CABLE 07, cv620-cable-07) 8-Pin RS-232 to RJ-45 Adapter Cable The CV620-CABLE-07 8-Pin RS-232 to RJ-45 Adapter Cable from Marshall allows for extended cable runs between daisy-chained cameras. Running the RS-232 signals over Cat5/6 cable allows the signal to travel up to 300 feet, which is significantly longer than possible with standard RS-232 cable. This cable features four connectors, two each 8-pin RS-232 and RJ-45, enabling you to use one cable for both the RS-232 in and out to the CV620 camera. One cable carries both RS-232 in and outAllows RS-232 signals to travel up to 300' for daisy-chaining multiple cameras

Marshall CV620-CABLE-06 RJ-45 to 8-Pin RS-232 & D-Sub 9 Connector Adapter Cable

Marshall CV620-CABLE-06 (CV620/CABLE/06, CV620_CABLE_06, CV620CABLE06, CV620 CABLE 06, cv620-cable-06) RJ-45 to 8-Pin RS-232 & D-Sub 9 Connector Adapter Cable Marshall's CV620-CABLE-06 RJ-45 to 8-Pin RS-232 & D-Sub 9 Connector Adapter Cable enables you to connect a computer or Marshall's VS-PTC-200 PTZ Controller (not included) to your CV620 PTZ camera, when using an optional Cat5/6 cable and RJ-45 to RS-232 8-pin adapter cable. Running the RS-232 signals over Cat5/6 cable allows the signal to travel up to 300 feet, which is significantly longer than possible with standard RS-232 cable. This cable features adapts a D-Sub 9 or RS-232 8-pin cable to an RJ-45 connector. Please note that you cannot connect both a computer and a VS-PTC-200 PTZ Controller to the cable at the same time. The cable adapts an RS-232 8-pin connector and a D-Sub 9-pin connector to an RJ-45 connectorAllows you to connect a CV620 camera to either a computer or the VS-PTC-200 controller

Marshall CV-USB-RS485 USB to RS485 Adaptor Converter

Marshall CV-USB-RS485 (CV/USB/RS485, CV_USB_RS485, CVUSBRS485, CV USB RS485, cv-usb-RS485) USB to RS485 Adaptor Converter Marshall USB to RS485 Adaptor Converter with Marshall Camera Control Software (Windows).

Marshall CV-HIROS-PWR Hirose Power Cable for CV505/565/345/365 Camera

Marshall CV-HIROS-PWR (CV/HIROS/PWR, CV_HIROS_PWR, CVHIROSPWR, CV HIROS PWR, cv-hiros-pwr) Hirose Power Cable for CV505/565/345/365 Camera Marshall Electronics Hirose Power Cable is compatible with CV505/565/345/365 Camera.

Marshall CV-RCP-V2-RMK Top Rack Mount Bracket for CV-RCP-V2 RCP

Marshall CV-RCP-V2-RMK (CV_RCP_V2_RMK, CV/RCP/V2/RMK, CV RCP V2 RMK) Top Rack Mount Bracket for CV-RCP-V2 RCP Rack mounts to drop into CCU control boards or broadcast trucks.

Marshall CV-RCP-V2 Touchscreen Multi-Camera Controller

Marshall CV-RCP-V2 (CV_RCP_V2, CV/RCP/V2, CV RCP V2) Touchscreen Multi-Camera Controller The Marshall CV-RCP-V2 Touchscreen Multi-Camera Controller provides control of up to seven cameras via a 5" touchscreen panel and two fine-tune control dials. The CV-RCP-V2 is pre-programmed with control protocols for all Marshall broadcast cameras plus select popular cameras from other brands. Use this compact unit to conveniently adjust, paint, and match your cameras from a control room or broadcast truck. The CV-RCP-V2 employs readily available 3-pin XLR cables for distances up to 1000' and can be converted to fiber for extended distances. Cables are not included with the controller and must be sourced separately. Your camera settings can be adjusted individually or applied globally without the OSD menu appearing in your video feed. Choose your settings via the touchscreen panel, then use the two dials for on-the-fly fine-tuning. Controllable parameters include exposure, white balance, gamma, black levels, and more. To speed up your workflow, the CV-RCP-V2's interface offers favorites settings, save features, self-help dialogs, and smart menus/sub-menus. Housed in a sturdy aluminum case, the Marshall CV-RCP-V2 controller runs on either the included AC adapter or on 12 VDC power. Its USB port can be used for saving presets to a memory stick or for firmware updates. Camera Compatibility Comes pre-programmed with control protocols for all Marshall cameras including POV, varifocal models, zoom, and PTZ cameras as well as popular cameras from other brands. Camera Paint Functions Individually or globally adjust camera settings like white balance, exposure, black levels, gamma, red/blue gain, shutter, frame rate, resolution and more. Touchscreen and Dial Controls A large 5" touchscreen panel and two fine-tune dials enable you to easily and quickly adjust your settings. Remote Control Adjust and match up to seven cameras at distances up to 1000' with common 3-pin XLR cables. The controller can be converted for fiber use over extended distances.

Marshall CS-5.0-12MP CS-Mount 5mm Fixed Lens

Marshall CS-5.0-12MP (CS_5.0_12MP, CS/5.0/12MP, CS 5.0 12MP) CS-Mount 5mm Fixed Lens The CS-Mount 5mm Fixed Lens from Marshall Electronics is designed for use with 12MP cameras that have a 1/1.7" sensor. This lens has a 5mm focal length that delivers an 87° horizontal field of view. It is IR corrected and features fixed iris operation.

Marshall CS-3.2-12MP CS-Mount 3.2mm Fixed Lens

Marshall CS-3.2-12MP (CS_3.2_12MP, CS/3.2/12MP, CS 3.2 12MP) CS-Mount 3.2mm Fixed Lens The CS-Mount 3.2mm Fixed Lens from Marshall Electronics is designed for use with 12MP cameras that have a 1/1.7" sensor. This lens has a 3.2mm focal length that delivers a 131° horizontal field of view. It is IR corrected and features fixed iris operation.

Marshall CS-0734-12MP CS-Mount 7-34mm Varifocal Lens

Marshall CS-0734-12MP (CS_0734_12MP, CS/073412MP, CS 0734 12MP) CS-Mount 7-34mm Varifocal Lens The CS-Mount 7-34mm Varifocal Lens from Marshall Electronics is designed for use with 12MP cameras that have a 1/1.7" sensor. This lens has a 7-34mm focal length with a 53.6-16.7° horizontal field of view. It features a DC auto iris, along with manual operation of zoom and focus.

Marshall CS-1040-8MP 8MP 4K/UHD 10-40mm Varifocal CS Mount Lens

Marshall CS-1040-8MP (CS_1040_8MP, CS 1040 8MP, CS/1040/8MP) 8MP 4K/UHD 10-40mm Varifocal CS Mount Lens The CS-1040-8MP is a 8MP 10-40mm F1.4-F1.7 4K/UHD varifocal CS mount lens for the CV420-CS and CV420-CS true 4K60 compact cameras.

Marshall CV380-CS 4K 8.5MP 6G-SDI & HDMI CS/C-Mount Compact Camera

Marshall CV380-CS (CV380_CS, CV380/CS, CV380 CS) 8.5MP 6G-SDI & HDMI CS/C-Mount Compact Camera The CV380-CS 4K 8.5MP 6G-SDI & HDMI CS/C-Mount Compact Camera from Marshall Electronics captures up to DCI 4K resolution video at 30 fps and offers simultaneous 6G/3G/HD-SDI and HDMI output. Featuring a compact form factor, the CV380-CS is designed as a discrete solution for broadcast, house of worship, live event, courtroom, remote learning, and other applications. A CS/C lens mount and 4-pin auto iris connector provide support for a wide variety of DC auto iris varifocal and fixed focal length lenses. The camera can be adjusted and matched to other cameras remotely via an RS-485 connection offered on an included breakout cable, or using an OSD menu joystick integrated on the same cable. Image adjustments can be made to white balance, gain, tone level (red/blue), pedestal (blacks), exposure, gamma, and other factors. The camera is mountable via a universal 1/4"-20 threaded mounting hole on the bottom.

Marshall CV-0622-5MP 6-22mm F1.6 M12 Mount Varifocal Lens

Marshall CV-0622-5MP (CV/0622/5MP, CV_0622_5MP, CV06225MP, CV 0622 5MP, cv-0622-5mp) 6-22mm F1.6 M12 Mount Varifocal Lens The M12-Mount 6-22mm IR Varifocal Lens from Marshall Electronics is designed for use with 5MP cameras that have a 1/2.5" sensor. This M12 mount lens features a 6-22mm focal length that delivers a 46.4-16.3° horizontal field of view. It offers fixed iris operation, along with manual focus and zoom operation with lock screws. IR corrected f/1.6 aperture 6.2mm back focal length

Marshall CV-2812-3MP 2.8-12mm F1.4 M12 Mount Varifocal Lens

Marshall CV-2812-3MP (CV/2812/3MP, CV_2812_3MP, CV28123MP, CV 2812 3MP, cv-2812-3mp) 2.8-12mm F1.4 M12 Mount Varifocal Lens The M12-Mount 2.8-12mm IR Varifocal Lens from Marshall Electronics is designed for use with 3MP cameras that have a 1/2.7" sensor. This M12 mount lens features a 2.8-12mm focal length that delivers a 109-31.2° horizontal field of view. It offers fixed iris operation, along with manual focus and zoom operation with lock screws.

Marshall CV-LENS-PACK Electronics CV Lens Pack

Marshall CV-LENS-PACK (CV_LENS_PACK, CV/LENS/PACK, CV LENS PACK) Electronics CV Lens Pack The Marshall Electronics CV Lens Pack is an addition to the CV505-M Mini Broadcasting Camera and includes 6 lenses (2.3mm, 2.8mm, 6mm, 8mm, 12mm, and 16mm). This CV Lens Pack has been designed and manufactured with the utmost precision, and incorporates lenses with improved image quality to maximise the capability and performance for a wider variety of applications such as security, broadcast TV, and sport. Compatible with most Marshall cameras.

Marshall CV-4716.0-2MP 16mm F1.8 2MP M12 Mount Lens

Marshall CV-4716.0-2MP (CV4716.0-2MP, CV/4716.0-2MP, CV_4716.0-2MP, CV 4716.0-2MP, cv-4716.0-2mp) 16mm F1.8 2MP M12 Mount Lens The 16mm f/1.8 M12 3MP Lens for Select Marshall Cameras features an M12 lens mount, which is used on select board level, POV, and lipstick cameras. Marshall has released this lens, which supports 3MP of resolution, making it more than sharp enough for HD sensors. This fixed lens mounts on any of the following Marshall cameras—CV502, CV505, CV565, CV225, and V-1292—and has nearly infinite depth of field and a fixed f/1.8 lens speed. This lens holds focus from near contact to infinity, and does not have a focusing mechanism Lenses with an M12 do not incorporate an actual iris, but rather uses the optical design to provide an effective lens speed of f/1.8 The lens does not incorporate an IR cut filter

Marshall CV-4712.0-3MP 12mm F1.8 3MP M12 Mount Lens

Marshall CV-4712.0-3MP (CV4712.0-3MP, CV/4712.0-3MP, CV_4712.0-3MP, CV 4712.0-3MP, cv-4712.0-3mp) 12mm F1.8 3MP M12 Mount Lens The 12mm f/2.0 M12 3MP Lens for Select Marshall Cameras features an M12 lens mount, which is used on select board level, POV, and lipstick cameras. Marshall has released this lens, which supports 3MP of resolution, making it more than sharp enough for HD sensors. This fixed lens mounts on any of the following Marshall cameras—CV502, CV505, CV565, CV225, and V-1292—and has nearly infinite depth of field and a fixed f/1.8 lens speed. This lens holds focus from near contact to infinity, and does not have a focusing mechanism Lenses with an M12 do not incorporate an actual iris, but rather uses the optical design to provide an effective lens speed of f/1.8 The lens does not incorporate an IR cut filter

Marshall CV-4708.0-3MP 8mm F1.8 3MP M12 Mount Lens

Marshall CV-4708.0-3MP (CV4708.03MP, CV/4708.0/3MP, CV_4708.0_3MP, CV 4708.0 3MP, cv-4708.0-3mp) 8mm F1.8 3MP M12 Mount Lens The 8mm f/2.0 M12 3MP Lens for Select Marshall Cameras features an M12 lens mount, which is used on select board level, POV, and lipstick cameras. Marshall has released this lens, which supports 3MP of resolution, making it more than sharp enough for HD sensors. This fixed lens mounts on any of the following Marshall cameras—CV502, CV505, CV565, CV225, and V-1292—and has nearly infinite depth of field and a fixed f/2 lens speed. This lens holds focus from near contact to infinity, and does not have a focusing mechanism Lenses with an M12 do not incorporate an actual iris, but rather uses the optical design to provide an effective lens speed of f/2 The lens does not incorporate an IR cut filter

Marshall CV-4706-3MP-IR 6mm F2.0 3MP M12 Mount Lens

Marshall CV-4706-3MP-IR (CV 4706 3MP IR, CV/4706/3MP/IR, CV_4706_3MP_IR, CV47063MPIR, cv-4706-3mp-ir) 6mm F2.0 3MP M12 Mount Lens This 6.0mm f/2.0 M12 3MP IR Lens for CV502-WPMB/WPM supports resolutions up to 3MP and incorporates an M12 lens mount. It maintains your CV502's IP67 rating and can also be mounted on other available cameras (not included) that have an M12 mount. This 6.0mm f/2.0 lens features an IR-cut coating on the rear element that minimizes IR contamination, for a clean image.

Marshall CV-4702.8-3MP-IR 2.8mm F2.0 3MP M12 Mount Lens

Marshall CV-4702.8-3MP-IR (CV/4702.8/3MP/IR, CV_4702.8_3MP_IR, CV4702.8-3MPIR, CV 4702.8-3MP IR, cv-4702.8-3mp-ir) 2.8mm F2.0 3MP M12 Mount Lens This 2.8mm f/2.0 M12 3MP IR Lens for CV502-WPMB/WPM supports resolutions up to 3MP and incorporates an M12 lens mount. It maintains your CV502's IP67 rating and can also be mounted on other available cameras (not included) that have an M12 mount. This 2.8mm f/2.0 lens features an IR-cut coating on the rear element that minimizes IR contamination, for a clean image.

Marshall CV-4702.3-3MP 2.3mm F2.2 3MP M12 Mount Lens

Marshall CV-4702.3-3MP (CV/4702.3/3MP, CV_4702.3_3MP, CV 4702.3 3MP, CV4702.33MP, cv-4702.3-3mp) 2.3mm F2.2 3MP M12 Mount Lens This Marshall 2.3mm f/2.2 M12 3MP Lens is designed to provide a 126° wide-angle field of view on 1/3"-sensor cameras that feature an M12 thread mount. This lens is offered can be used with Marshall CV225, CV502, CV505, and CV565 cameras.