Metabones MB_SPFD-E-BM2 Canon FD to E-mount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPFD-E-BM2 (MB_SPFD_E_BM2, MB/SPFD/E/BM2, MB SPFD E BM2) Canon FD to E-mount Speed Booster ULTRA 0.71x (Black Matt) The Canon FD Lens to Sony E-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame Canon FD lens to be mounted to an APS-C format E-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop.  When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens decreases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Metabones Speed Boosters are quality made using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. This adapter has a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony full frame mirrorless cameras, but the camera must be set in Crop Mode to fully support the speed booster's functions. Allows a full frame Canon FD lens to be mounted to an E-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.

Metabones MB_SPA-X-BM2 Sony Alpha to X-mount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPA-X-BM2 (MB_SPA_X_BM2, MB/SPA/X/BM2, MB SPA X BM2) Sony Alpha to X-mount Speed Booster ULTRA 0.71x (Black Matt) The Speed Booster Ultra 0.71x Adapter for Sony A-Mount Lens to Fujifilm X-Mount Camera from Metabones allows a full-frame Sony A-mount lens to be mounted onto a Fujifilm X-mount camera. While doing so, the adapter's optics help to maximize the connected lens's apparent angle of view while providing a 1-stop increase for the camera over the lens's aperture range. If a lens intended for 35mm film or similarly sized full-frame camera sensors is connected to a camera with a Fuji X-mount APS-C-sized sensor, it would project an image larger than the Fuji X-mount APS-C sensor was built to accept. Able to capture only the center portion of the projected image, the effective angle of view of the lens would be narrowed, creating an in-camera "crop factor." The Speed Booster Ultra 0.71x Adapter for Sony A-Mount Lens to Fujifilm X-Mount Camera condenses the light from a lens designed for 35mm film or "full frame" camera sensors and projects it onto a Fuji X-mount APS-C sensor. This allows a Fuji X-mount APS-C sensor to utilize more of the light gathered by a connected lens, which effectively reduces the crop factor while making available to the sensor an additional 1 stop of light for each of the lens's f/stop settings. This adapter is constructed from aluminum alloy for durability while minimizing weight and its mounting rings are made with brass to further prevent wear-and-tear. Inside are five lens elements in four groups that are designed to provide optical clarity as well as color fidelity, and a detachable tripod foot is included that features 3/8" threads as well as compatibility with Arca-Swiss tripod heads. The Speed Booster Ultra 0.71x Adapter for Sony A-Mount Lens to Fujifilm X-Mount Camera does not support electronic communication between an attached camera and lens. To help determine the amount of light that enters a Fujifilm X-mount camera when using this adapter and a Sony A-mount lens, an aperture dial is built into the Speed Booster Ultra 0.71x Adapter for Sony A-Mount Lens to Fujifilm X-Mount Camera. Allows a full-frame Sony A-mount lens to be used with a Fujifilm X-mount camera Maximizes apparent angle of view of combined camera and lens Provides a 1-stop increase for the camera over the lens's aperture range Five lens elements in four groups for optical clarity as well as color fidelity Detachable, Arca-Swiss compatible tripod foot with 3/8" threads Aluminum alloy components for weight reduction Brass mounting rings prevent wear-and-tear Locking mechanism for secure attachment of lens with push-button release  

Metabones MB_SPA-E-BM2 Sony Alpha to E-mount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPA-E-BM2 (MB_SPA_E_BM2, MB/SPA/E/BM2, MB SPA E BM2) Sony Alpha to E-mount Speed Booster ULTRA 0.71x (Black Matt) The Sony A-Mount Lens to Sony E-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame Sony A-Mount lens to be mounted to an APS-C format E-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop.  When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens decreases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Metabones Speed Boosters are quality made using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. This adapter has a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. A built-in aperture control ring enables manual control of aperture from the speed booster. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony full frame mirrorless cameras, but the camera must be set in Crop Mode to fully support the speed booster's functions. Allows a full frame Sony A-Mount lens to be mounted to an E-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. A built-in aperture control ring enables manual control of aperture from the speed booster. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.

Metabones MB_SPCX-X-BM1 Contarex to Xmount Speed Booster 0.71x (Black Matt)

Metabones MB_SPCX-X-BM1 (MB_SPCX_X_BM1, MB/SPCX/X/BM1, MB SPCX X BM1) Contarex to Xmount Speed Booster  0.71x (Black Matt) The Contarex Lens to Sony NEX Camera Speed Booster from Metabones allows Contarex lenses to be mounted to Sony E-Mount APS-C format cameras, increasing the angle of view and the maximum aperture of the lens by 1 f-stop. This photo accessory also comes with a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor without vignetting; this allows the sensor to capture all of the lens' transmitted light and effectively produce full-frame coverage on non-full-frame sensors. A corresponding increase in the maximum aperture of 1 stop makes the lens more effective in low-light situations and able to create a shallow depth of field. Metabones' Speed Boosters are made of machined brass, finished in satin black, the camera-body, and chromium-plated on both mounts to ensure smooth mounting and reliability. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony A7/A7R full frame mirrorless cameras but the camera must be set in Crop Mode to fully support the speed booster's functions. Automatic diaphragm (AE metering) and other auto functions are deactivated while Speed Booster is attached. Allows Contarex lens to be mounted to Sony E-Mount camera Increases the angle of view and maximum aperture by 1 stop Electronic integration of aperture diaphragm controlled from the camera body. Reaches infinity focus while maintaining the correct registration distance Precision-machined and chromium-plated brass lens and camera mounts Matte-black interior finish reduces internal reflection and helps preserve image quality Detachable tripod foot compatible with Arca Swiss, Markins, and Photo Clam ball heads Satin black finish exterior  

Metabones MB_SPCX-E-BM1 Contarex to Emount Speed Booster 0.71x (Black Matt)

Metabones MB_SPCX-E-BM1 (MB_SPCX_E_BM1, MB/SPCX/E/BM1, MB_SPCX_E_BM1) Contarex to Emount Speed Booster  0.71x (Black Matt) The Contarex Lens to Sony NEX Camera Speed Booster from Metabones allows Contarex lenses to be mounted to Sony E-Mount APS-C format cameras, increasing the angle of view and the maximum aperture of the lens by 1 f-stop. This photo accessory also comes with a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor without vignetting; this allows the sensor to capture all of the lens' transmitted light and effectively produce full-frame coverage on non-full-frame sensors. A corresponding increase in the maximum aperture of 1 stop makes the lens more effective in low-light situations and able to create a shallow depth of field. Metabones' Speed Boosters are made of machined brass, finished in satin black, the camera-body, and chromium-plated on both mounts to ensure smooth mounting and reliability. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony A7/A7R full frame mirrorless cameras but the camera must be set in Crop Mode to fully support the speed booster's functions. Automatic diaphragm (AE metering) and other auto functions are deactivated while Speed Booster is attached. Allows Contarex lens to be mounted to Sony E-Mount camera Increases the angle of view and maximum aperture by 1 stop Electronic integration of aperture diaphragm controlled from the camera body. Reaches infinity focus while maintaining the correct registration distance Precision-machined and chromium-plated brass lens and camera mounts Matte-black interior finish reduces internal reflection and helps preserve image quality Detachable tripod foot compatible with Arca Swiss, Markins, and Photo Clam ball heads Satin black finish exterior

Metabones MB_SPALPA-X-BM2 ALPA to Xmount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPALPA-X-BM2 (MB_SPALPA_X_BM2, MB/SPALPA/X/BM2, MB SPALPA X BM2) ALPA to Xmount Speed Booster ULTRA 0.71x (Black Matt) The ALPA Lens to Fujifilm X-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame ALPA lens to be mounted to an APS-C format X-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop.  When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens increases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.  Metabones Speed Boosters are quality made, using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. A matte black interior reduces internal reflections and a black satin finish external surface matches with most camera bodies and lenses. This adapter has a tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads, and can be removed if needed with an included hex key. Allows a full frame ALPA lens to be mounted to an Fujifilm X-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. Two hex keys included with the product, one to detach the tripod foot and another to tighten a mounting screw

Metabones MB_HV-LS-BM1 Leica S to Hasselblad

Metabones MB_HV-LS-BM1 (MBHVLSBM1, MB HV LS BM1, MB/HV/LS/BM1, mb_hv-ls-bm1) Leica S to Hasselblad The Hasselblad V Lens to Leica S Camera Lens Mount Adapter from Metabones allows a Hasselblad V mount lens to be attached to Leica S cameras. Metabones adapters are quality made, using precision-machined brass with chromium plating on both the camera-body and the lens sides of the adapter in order to ensure smooth mounting, quality aesthetic, and durability. This adapter uses a matte-black finish to minimize internal reflection. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this adapter. Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The lens side of the adapter features a strong leaf-spring structure, strengthening the adapter-lens connection and ensuring tightness of the lens. Satin surface finish.

Metabones MB_PK67-LS-BM1 Leica S to Pantax 6X7

Metabones MB_PK67-LS-BM1 (MBPK67LSBM1, MB PK67 LS BM1, MB/PK67/LS/BM1, mb_pk67-ls-bm1) Leica S to Pantax 6X7 The Pentax 67 Lens to Leica S Camera Lens Mount Adapter from Metabones allows a Pentax 67 mount lens to be attached to Leica S cameras. Metabones adapters are quality made, using precision-machined brass with chromium plating on both the camera-body and the lens sides of the adapter in order to ensure smooth mounting, quality aesthetic, and durability. This adapter uses a matte-black finish to minimize internal reflection. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this adapter. Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The lens side of the adapter features a strong leaf-spring structure, strengthening the adapter-lens connection and ensuring tightness of the lens. Satin surface finish.

Metabones MB_M645-LS-BM1 Leica S to Mamiya 645

Metabones MB_M645-LS-BM1 (MBM645LSBM1, MB M645 LS BM1, MB/M645/LS/BM1, mb_m645-ls-bm1) Leica S to Mamiya 645 The Mamiya 645 Lens to Leica S Camera Lens Mount Adapter from Metabones allows a Mamiya 645 mount lens to be attached to Leica S cameras. Metabones adapters are quality made, using precision-machined brass with chromium plating on both the camera-body and the lens sides of the adapter in order to ensure smooth mounting, quality aesthetic, and durability. This adapter uses a matte-black finish to minimize internal reflection. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this adapter. Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The lens side of the adapter features a strong leaf-spring structure, strengthening the adapter-lens connection and ensuring tightness of the lens. Satin surface finish.

Metabones MB_SPNFG-BMCC-BM1 Nikon G to BMCC Speed Booster (Black Matt)

Metabones MB_SPNFG-BMCC-BM1 (MBSPNFGBMCCBM1, MB SPNFG BMCC BM1, MB/SPNFG/BMCC/BM1, mb_spnfg-bmcc-bm1) Nikon G to BMCC Speed Booster (Black Matt) The Nikon G Lens to Blackmagic 2.5k Cinema Camera with Micro-4/3 Mount Speed Booster from Metabones allows a Nikon G lens to be mounted to a 2.5k Cinema Camera and in doing so, increases the angle of view and the maximum aperture. The Speed Booster uses 6-element optical design that incorporates ultra-high index glass to achieve ideal optical performance at the largest apertures. It increases the maximum aperture by 1 1/3 stops with a maximum aperture of f/0.8, and reduces the crop factor from 2.39x to 1.53x. The Speed Booster not only increases the field of view and lens speed, it also increases the lens' MTF, or how faithfully the lens transfers detail from the object to the camera sensor. These increases in MTF are seen in the corners as well as the center of the images. Built into the Speed Booster is a clickless aperture ring, a must-have feature for cinematographers, as well as a removable Arca-type compatible tripod mount.

Metabones MB_SPNFG-BMPCC-BM1 Nikon G to BMPCC Speed Booster (Black Matt)

Metabones MB_SPNFG-BMPCC-BM1 (MBSPNFGBMPCCBM1, MB SPNFG BMPCC BM1, MB/SPNFG/BMPCC/BM1, mb_spnfg-bmpcc-bm1) Nikon G to BMPCC Speed Booster (Black Matt) The Nikon G Lens to Blackmagic Pocket Cinema Camera Speed Booster from Metabones allows a Nikon G lens to be mounted to a Pocket Cinema Camera, and in doing so, increases the angle of view and the maximum aperture. The 6-element optical design within the Speed Booster incorporates ultra-high index glass to achieve ideal optical performance at the largest apertures. It increases the maximum aperture by 1 2/3 stops with a maximum aperture of f/0.74, and reduces the crop factor from 2.88x to 1.75x. The Speed Booster not only increases the field of view and lens speed, it also increases the lens' MTF, or how faithfully the lens transfers detail from the object to the camera sensor. These increases in MTF are seen in the corners as well as the center of the images. Built into the Speed Booster is a clickless aperture ring, a must-have feature for cinematographers, as well as a removable Arca-type compatible tripod mount. This Speed Booster is not compatible with the Nikkor 2.1cm f/4.0 lens, or the 20mm f/2.8 AI-S lens.

Metabones MB_SPLR-BMCC-BM1 Leica R to BMCC Speed Booster (Black Matt)

Metabones MB_SPLR-BMCC-BM1 (MB_SPLR_BMCC_BM1, MB/SPLR/BMCC/BM1, MB SPLR BMCC BM1) Leica R to BMCC Speed Booster (Black Matt) The Leica R Lens to Blackmagic Cinema Camera Speed Booster from Metabones allows you to mount a Leica R lens on a Blackmagic Cinema Camera, while using custom optics to increase the angle of view and the maximum aperture of the lens. The Speed Booster works by shrinking the image circle of your Leica R lens down to better fit the smaller sensor of the Blackmagic Cinema Camera. This has the effect of making the angle of view of the lens 0.64x wider or, in other terms, reducing the crop factor of the camera from 2.39x to 1.53x. This yields an angle of view similar to APS-C or Super 35 sized sensors. When the Speed Booster concentrates the image circle from a lens, the brightness of the image is increased by 1 1/3 stops, with a maximum output aperture of f/0.9 when using a Leica R f/1.4 lens. In addition to lens speed and angle of view, the Speed Booster also increases the lens' MTF, or how faithfully the lens transfers detail from the object to the camera sensor. These increases in MTF are seen in the corners as well as the center of the images. For added lens support, a removable Arca-type tripod foot is included. Super telephotos such as the Telyt 560/5.6 may vignette at the corners.

Metabones MB_SPLR-BMPCC-BM1 Leica R to BMPCC Speed Booster (Black Matt)

Metabones MB_SPLR-BMPCC-BM1 (MBSPLRBMPCCBM1, MB SPLR BMPCC BM1, MB/SPLR/BMPCC/BM1, mb_splr-bmpcc-bm1) Leica R to BMPCC Speed Booster (Black Matt) The Leica R Lens to Blackmagic Pocket Cinema Camera Speed Booster from Metabones allows you to mount a Leica R lens on a Blackmagic Pocket Cinema Camera, while using custom optics to increase the angle of view and the maximum aperture of the lens. The Speed Booster works by shrinking the image circle of your Leica R lens down to better fit the smaller sensor of the Blackmagic Pocket Cinema Camera. This has the effect of making the angle of view of the lens 0.58x wider or, in other terms, reducing the crop factor of the camera from 2.88x to 1.75x. When the Speed Booster concentrates the image circle from a lens, the brightness of the image is increased by 1 2/3 stops, with a maximum output aperture of f/0.8 when using a Leica R f/1.4 lens. In addition to lens speed and angle of view, the Speed Booster also increases the lens' MTF, or how faithfully the lens transfers detail from the object to the camera sensor. These increases in MTF are seen in the corners as well as the center of the images. For added lens support, a removable Arca-type tripod foot is included. Super telephotos such as the Telyt 560/5.6 may vignette at the corners.