Shape Vlogging Kit for iPhone

SH-VIPHO SHVIPHO SH VIPHO SH/VIPHO Shape Vlogging Kit for iPhone Shape Vlogging Kit for iPhone The vlogging telescopic tripod grip with ball head works as a stable holder or an ergonomic grip. Designed with ¼-20 knob screw for mounting the grip to your smartphone. The flexible mini ball head rotates 360° and supports vertical and landscape shooting. Together, the telescopic tripod, the ball head and the smartphone clamp combo allow you to vlog and share experiences, thoughts, and ideas with an audience. Friction swivel and tilt smartphone aluminum clamp (SPST) This device is perfect for the manipulation and use of your smartphone with your camera. The clamp is compatible with smartphones 2.5 to 3.5″ wide and is built using lightweight and robust aluminium. The female cold shoe, designed on top of the clamp, let you mount your LED video light, microphone or any other light camera accessories. The bottom of the device can be cold shoe mounted and the thumbscrew system strongly fix the device to your camera rig. The swivel mechanism of the device lets you tilt your accessory, up and down, for an optimal rig configuration to be locked in place with an HEX key. Mini LED Video Light The Mini LED Video Light technology makes the light softer, lither, and with not dazzling. The light is designed with a male cold shoe to be mounted on top of the smartphone clamp. Charging time is 2 hours Maximum brightness output up to 120 minutes Minimum brightness output up to 300 minutes. An essential of 49 LED beads with High Color Rendering Index 5500K Color Temperature Shows the Beauty of Natural Light Weight: 90 g Material: ABS Power: 6 W Charging port: Type-c Lithium battery large capacity: 2000 mAh Color temperature: 5500±200 Dimension: 7.5 cm*6 cm*2.3 cm Video microphone The microphone is designed with a metal body and a shock mount to minimize the noise of unwanted vibrations. Also, the cardioid recording pattern minimize the noise interference of non-subjects. No battery required. Sensor: Electret Condensor Microphone Polar Patter: Cardioid Frequency Range: 100Hz~20kHz Signal to Noise Ratio: 70 dB Sensitivity: -38.0 dB (F=1KHZ, S.P.L = 1 Pa 0 dB = 1 V/Pa) Power: No battery required Output: 3.5 mm TRS Dimension (mm): 20 x 70 mm Weight: 66 g

Shape V-mount pivoting battery plate for Canon C70

SH-VBC70 SHVBC70 SH VBC70 SH/VBC70 Shape V-mount pivoting battery plate for Canon C70 SHAPE VBC70 Pivoting Battery Plate for Canon C70 (V-Mount) The SHAPE V-Mount pivoting battery plate for CANON C70 attaches to the rear of the top plate (C70TP) and supports a V-mount battery while leaving access to the camera’s standard battery compartment. Our V-mount battery plate provides the right battery voltage and amperage to use with your CANON C70 camera. By pivoting the battery plate, you have access to the battery of the camera and also allows hot-swap features. A swivel system let you pivot the battery plate up and down. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. It connects to the camera using the SHAPE 14.4 output D-Tap power cable for Canon C70. The cable regulates the voltage from a D-Tap source to the proper 14.4 V required to power your Canon C70 camera. This allows you to power your camera using any V-mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm). A universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide easy access to the rear screen.

Shape Sony FX6 Gold Mount pivoting battery plate

SH-GBFX6 SHGBFX6 SH GBFX6 SH/GBFX6 Shape Sony FX6 Gold Mount pivoting battery plate The SHAPE Gold Mount pivoting battery plate for Sony FX6 attaches to the rear of the top plate (FX6TP) and supports a Gold Mount battery while leaving access to the camera’s standard battery compartment. Our Gold Mount battery plate provides the right battery voltage and amperage to use with your Sony FX6 camera. By pivoting the battery plate, you have access to the BPU battery of the camera and also allows hot swap feature. A swivel system lets you pivot the battery plate up and down. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. It connects to the camera using the SHAPE 19.5V output D-Tap power cable for Sony FX6. The cable regulates the voltage from a D-Tap source to the proper 19.5 V required to power an FX6 camera. This allows you to power your camera using any Gold Mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm). A universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide easy access to the rear connector and have access to the BPU battery.

Shape Universal Bridge Plate and 12-inch Dovetail Plate Arri standard

SH-DPKLW SHDPKLW SH DPKLW SH/DPKLW Shape Universal Bridge Plate and 12-inch Dovetail Plate Arri standard SHAPE ARRI Standard 15mm Studio Bridge Plate & 12′′ Dovetail Plate Kit This lightweight and strong aluminum body ARRI Standard 15mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate; it uses 15mm rods (12′′) and 15mm Studio Offset Spacing (rods spaced 100mm center to center).Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. Thereis also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings. The SHAPE Lightweight ARRI Standard 12′′ Dovetail Plate allows you to quickly and easily balance the weight when using front or back heavy camera equipment. It also features an easy-to-access stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. The dovetail also provides several 1/4′′-20 and 3/8′′-16 threaded holes for tripod plateattachment. It can be attached to a shoulder pad for custom handheld configurations.

Shape Gold Mount to V-Mount Regulated Battery Converter

Shape SH-GVRPC (SH GVRPC, SH_GVRPC, SH/GVRPC, SHGVRPC) Gold Mount to V-Mount Regulated Battery Converter The Shape Gold Mount to V-Mount Regulated Battery Converter is a lightweight battery adapter plate that lets you power cameras or lights that have an integrated V-mount battery plate with a Gold mount battery. The converter incorporates a regulated D-Tap output for powering accessories.

Shape V-Mount Plate for Canon C300 Mark II

Shape SH-UMPCII (SH/UMPCII, SH UMPCII, UMPCII, sh-umpcii) V-Mount Plate for Canon C300 Mark II Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Canon C300 Mk II Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and four plate-mounting screws are included with the plate.

Shape ARRI Standard to DJI Ronin 2 Dovetail Adapter (11")

Shape SH-DRA28 (SH/DRA28, SHDRA28, SH DRA28, DRA28, sh-dra28) ARRI Standard to DJI Ronin 2 Dovetail Adapter (11") Quickly switch your camera between your gimbal and tripod with this 11" ARRI Standard to DJI Ronin 2 Dovetail Adapter from SHAPE. Made of CNC-machined anodized aluminum, this dovetail plate's slide-in/slide-out design allows you to quickly transfer your camera attached to an ARRI standard bridgeplate to the DJI Ronin 2 without having to deal with screws and different plates. The plate's convenient ruler system makes balancing and rebalancing your camera easy. Its 11" length is designed to balance heavy loads; for even heavier builds, separately available counterbalances can be screwed into the three 1/4"-20 threaded holes at one end.

Shape Dovetail For Dji Ronin 2 To Arri Standard 180Mm Length

Shape SH-DRA18 (SH/DRA18, SH DRA18, SHDRA18, DRA18, sh-dra18) Dovetail For DJI Ronin 2 To ARRI Standard 180 mm Length Quickly switch your camera between your gimbal and tripod with this 7" ARRI Standard to DJI Ronin 2 Dovetail Adapter from SHAPE. Made of CNC-machined anodized aluminum, this dovetail plate's slide-in/slide-out design allows you to quickly transfer your camera attached to an ARRI standard bridgeplate to the DJI Ronin 2 without having to deal with screws and different plates. The plate's convenient ruler system makes balancing and rebalancing your camera easy. Its 7" length is designed to balance heavy loads; for even heavier builds, separately available counterbalances can be screwed into the three 1/4"-20 threaded holes at one end.

Shape V-Mount Plate for Canon C100/C300/C500

Shape SH-UMPC1 (SHUMPC1, SH/UMPC1, SH UMPC1, UMPC1, sh-umpc1) V-Mount Plate for Canon C100/C300/C500 Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Canon C100/300/500 Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and six plate-mounting screws are included with the plate.

Shape V-Lock Plate with D-Tap for Blackmagic URSA

Shape SH-UMPBU (SHUMPBU, SH/UMPBU, SH UMPBU, UMPBU, sh-umpbu) V-Lock Plate with D-Tap for Blackmagic URSA Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Blackmagic URSA Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and four plate-mounting screws are included with the plate.

Shape SH-CPVALX Cheese Plate and V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-CPVALX (SH_CPVALX, SHCPVALX, SH/CPVALX, SH CPVALX) Cheese Plate and V-Mount Battery Plate for ARRI ALEXA Mini Camera This item features a Cheese Plate and a V-Mount Battery Plate to power your Alexa Mini Camera. The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig. A 10" cable connects to the Alexa Mini's power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape SH-CPGALX Cheese Plate and Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-CPGALX (SH_CPGALX, SHCPGALX, SH/CPGALX, SH CPGALX) Cheese Plate and Gold Mount Battery Plate for ARRI ALEXA Mini Camera This item features a Cheese Plate and a Gold Mount Battery Plate to power your Alexa Mini Camera. The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the Alexa Mini’s power input and provides the necessary amount of power to the camera.

Shape SH-ALEXVM V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXVM (SH_ALEXVM, SHALEXVM, SH/ALEXVM, SH ALEXVM) V-Mount Battery Plate for ARRI ALEXA Mini Camera Our V-Mount battery plate provides the right battery voltage and amperage to use with your ALEXA Mini camera.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input. Additional accessories can also be powered off the P-Tap port.

Shape SH-ALEXGM Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXGM (SH_ALEXGM, SHALEXGM, SH/ALEXGM, SH ALEXGM) Gold Mount Battery Plate for ARRI ALEXA Mini Camera The Gold Mount ALEXA Mini Battery Plate is perfect to power your ALEXA Mini camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input and provides the necessary amount of power to the camera.

Shape SH-CPVRD Cheese Plate and V-Mount Battery Plate for RED Camera

Shape SH-CPVRD (SH_CPVRD, SHCPVRD, SH/CPVRD, SH CPVRD) Cheese Plate and V-Mount Battery Plate for RED Camera This item features a Cheese Plate and a V-Mount Battery Plate to power your RED camera.  The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the RED’s power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape Cheese Plate and Gold Mount Battery Plate for RED Camera

Shape SH-CPGRD (SH_CPGRD, SHCPGRD, SH/CPGRD, SH CPGRD) Cheese Plate and Gold Mount Battery Plate for RED Camera This item features a Cheese Plate and a Gold Mount Battery Plate to power your RED camera.  The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the RED’s power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.  

Shape Gold Mount Battery Plate for RED Camera

Shape SH-REDGM (SH_REDGM, SHREDGM, SH/REDGM, SH REDGM) Gold Mount Battery Plate for RED Camera The Gold Mount RED Battery Plate is perfect to power your RED camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the RED's power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II

Shape SH-CP300M2 (SHCP300M2, SH/CP300M2, SH CP300M2, CP300M2, sh-cp300m2) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a ROD BLOC for Mounting. Perfect to Mount any accessories such as; Shape MAGIC ARM, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC LEMO cable with the standard output voltage for C300 Canon Mark II series cameras.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras

Shape SH-CP300 (SHCP300, SH/CP300, SH CP300, CP300, sh-cp300) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a Rob Bloc for mounting. Perfect to mount any accessories such as; Shape Magic Arm, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC Lemo cable with the standard output voltage for C300 Canon Mark II series cameras.  

Shape Gold Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5

Shape SH-CPGEVA (SHCPGEVA, SH/CPGEVA, SH CPGEVA, CPGEVA, sh-cpgeva) Gold Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5 The Gold Mount Battery Cheese Plate from SHAPE features a cheese plate and a Gold mount battery plate to power your Panasonic AU-EVA1, Sony FS7, or FS5 cameras. The cheese plate is designed with a 15mm Rod Bloc system with one ratchet knob for quickly fixing the plate to your camera rig. The included 22" regulated D-Tap cable can connect to the ALEXA Mini's power input.

Shape V-Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5

Shape SH-CPVEVA (SHCPVEVA, SH/CPVEVA, SH CPVEVA, CPVEVA, sh-cpveva) V-Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5 The V-Mount Battery Cheese Plate from SHAPE features a cheese plate and a V-mount battery plate to power your Panasonic AU-EVA1, Sony FS7, or FS5 cameras. The cheese plate is designed with a 15mm Rod Bloc system with one ratchet knob for quickly fixing the plate to your camera rig. The included 22" regulated D-Tap cable can connect to the ALEXA Mini's power input.

Shape CP33 Cheese Plate with IDX Plate

Shape SH-CP33IDX (SH_CP33IDX, SHCP33IDX, SH/CP33IDX, SH CP33IDX) CP33 Cheese Plate with IDX Plate The Shape CP33 Cheese Plate with IDX Plate is a 15mm rod-mount cheese plate with an IDX V-Mount battery plate screwed onto one side. The plate is 1/4" thick and features 33 threaded holes for accessories to be screwed into. These holes run end to end, from one side of the plate to the other. Four of the holes are 10/32" and the rest are 1/4" and 3/8". The IDX plate covers many of the holes from one side, but you can still screw into these holes from the other side as long as the screws are not much longer than the 1/4" thickness of the plate. The holes at the very corners of the plate are untouched by the IDX plate and can be used to attach accessories or devices like AJA's Ki Pro Mini. Screws are included for a Ki Pro Mini and for an Anton Bauer battery plate. The cheese plate is precision-machined as one piece.