Dedolight DMTSB420-SR Tripple stud boom with sliding receptacle. Length 42 cm.

Dedolight DMTSB420-SR (DMTSB420SR, DMTSB420_SR, DMTSB420/SR, DMTSB420 SR) Tripple stud boom with sliding receptacle. Length 42 cm. The Triple Stud Boom with Sliding Receptacle from Dedolight is 42cm in length.      

Dedolight DP400IR2 Series 400 Iris assembly

Dedolight DP400IR2 (DP400I-R2,DP400I_R2, DP400I R2, DP400I/R2) Series 400 Iris assembly This 18-Leaf Iris Assembly is a front-attaching accessory for the Dedolight DP400 and DP1200 projectors and the Prolycht DP400KU185-P and DP400KU150-P projectors that uses a sliding tab to adjust the amount of light and its beam angle. At its narrowest diameter, a tab drops into place to completely block the light.   A new item in the dedolight projection arsenal, this is the DP400IR2 dedicated 18-leaf Iris assembly. This dedicated Iris assembly is compatible with the Dedo DP400 and 1200 projectors as well as Prolycht DP400KU185-P or DP400KU150-P projectors. Just like the other dedicated projection assemblies, this iris assembly mounts between the DP400CON or DP400CON-AP condensers and DP400LH lens holder. A sliding tab smoothly collapses or expands the iris to get the desired circle size. At its narrowest diameter, a tab drops into place to completely block the center and gives the appearance that the iris is fully closed. This allows users to do collapsing iris gags with no light passing through when the iris can't be collapsed further.      

Dedolight DP400CON Condenser Series 400 for use with lenses 100, 150, 185 or 230 mm

Dedolight DP400CON (DP400-CON, DP400C ON, DP400/CON, DP400_CON) Condenser Series 400 for use with lenses 100, 150, 185 or 230 mm  for 400 Series Imager. Part of the system that focuses the beam of the light. This is the DP400CON-WA, a wide-angle condenser module for Dedo DP400 projectors. It's the base of your dedolight projector for use with with 70mm and 100mm lenses. When using the DP400CON-WA wide-angle condenser, you must build your projector assemblies to fit. Any of the following assemblies are compatible:        

Dedolight DP3.1-0 Slide and Steel Gobo Projection Attachment

Dedolight DP3.1-0  (DP3.1/0, DP3.1_0, DP3.1 0, DP3.10) Slide and Steel Gobo Projection Attachment Made for use with DLH4, DLHM4-300, and DLH200DT lights, the Dedolight Slide and Steel Gobo Projection Attachment has a 24 VDC power supply that runs a multi-speed cooling fan which allows prolonged use of slides or M-size gobos without damage. The attachment has advanced features such as Image Plane Adjustment that insures edge-to-edge sharpness even for off-axis projections. Various fixed and zoom projection lenses are available separately to suit your distance and image size requirements.        

DTneoPlus Power Supply dedolight neo with BT-CRMX

Dedolight DTneoPlus (DTneo Plus, DTneo/Plus, DTneo-Plus, DTneo_Plus)  Power Supply dedolight neo with BT-CRMX The new Dedolight DTNEO+ neo ballast will drive all new Dedolight NEO LED Systems from 20 to 90 Watts: Monocolor, Bi-Color, Infrared and Ultraviolet. The Dedolight DTneo+ ballast has a ground-breaking advanced electronics package built inside an aluminium housing with a common connector pin-assignment. The DTNEO+ auto senses the connected light head and automatically adjusts the electronic settings and OLED display to match. With the DTNEO+ ballast you can use wireless control via CRMX LumenRadio and Bluetooth. DMX is now standard in all Dedolight DTNeo ballasts and is simple to control using the push/turn knob and OLED displayed menu to select between a deep, smooth "linear" or "exponential" dimming curve, or seamlessly change color, without drifting- even below 10% output (0.1 to 100% dimming range). You can take advantage of the 1000-point 8-bit linear, or 16-bit advanced control (via DMX/RDM protocol). Select the high-speed setting to shoot up to 50,000fps flicker-free. Both the DTNeo ballast hardware and software are future-proof. The software is user upgradable via USB and the DTneo ballasts have an auto-detect feature to recognize and drive all the upcoming DLEDNeo light heads between 20w-90w. If you wish to invest for the future, the upcoming DLED3Neo light, the DLED7Neo Infra-red, Ultra-Violet and even future generations of DLED7Neo, will all be controlled by the DTneo ballast, up to the Neo DLED9. To put it simply, the DTNeo ballast opens the world to an entire new generation of light heads and control from Dedolight.