Hawk-Woods VL-HS1 Alexa Mini Hot Swap - XLR

Hawk-Woods VL-HS1 (VL_HS1, VL/HS1, VL HS1) Alexa Mini Hot Swap - XLR Hawk-Woods V-Lok 15mm Alexa Mini/Amira adapter offers the user the use of V-Lok batteries. This adapter comes fully equipped with outputs consisting of 4x Power-con (D-Tap), 2x Lemo and 2x RS 24v Regulated outputs. This adapter offers you a hot swap solution, with a chassis mounted XLR on the side of the adapter, allowing you the use of 24v floor batteries. The product has been fitted with 12v regulators on the D-TAPs and Lemos so they will never see the 24v.  The camera will always select the battery with the highest voltage until they meet the same, then they will run down together. VL-HS1 comes with a fixed flying lead to the camera.

Hawk-Woods VL-2X2C V-Lok 2-ch Simultaneous Ultra Fast Charger

Hawk-Woods VL-2X2C (VL_2X2C, VL/2X2C, VL 2X2C) V-Lok 2-ch Simultaneous Ultra Fast Charger This dual compact V-Lok charger is Hawkwoods take on the VL-2X2 providing users with a more compact, sturdy solution for charging two V-Lok batteries simultaneously. The new design offers a sleek look with improved latch for adding and removing batteries. LED indicators are also fitted (for instructions see manual supplied) and the fixed handle has been replaced with a soft leather strap. The VL-2X2C charges at a faster rate compared to the VL-2X2P

Hawk-Woods VLM-B1 Mini V-Lok Battery Belt-Single Fitting

Hawk-Woods VLM-B1 (VLM_B1, VLM/B1, VLM B1) Mini V-Lok Battery Belt-Single Fitting The VLM-B1 is a high quality leather battery belt which is manufactured in the UK by Hawk-Woods. This belt will allow you to attach mini V-Lok batteries, this particular belt offers a single fitting, the fitting sits flush with the belt which makes this more comfortable to wear. This product is very handy for powering equipment on locations and ideal for maneuverability. This is also highly convenient for taking the weight off the camera, making light work of the task! For longer run times please refer to VLM-B2 this will offer 2x mini-vl fitting plates. Should you require different connectors or further connectors please ask before ordering via your chosen re-seller!

Hawk-Woods VLM-AS1 Atomos Inferno Mini V-Lok Monitor Fitting

Hawk-Woods VLM-AS1 (VLM_AS1, VLM/AS1, VLM AS1) Atomos Inferno Mini V-Lok Monitor Fitting Atomos Inferno Mini V-Lok monitor fitting    The adapter is designed to work with the Shogun/Ninja - Inferno/Flame range of monitors, this adapter will simply mount to the rear of the monitor allowing the use of V-Lok batteries.   A fixed flying lead will provide power to the monitor DC input.   Using the MINI V-Lok battery system, will keep weight to a minimum, however provide plenty of power to the monitor allowing you to run for longer with less battery changes. This is massive improvement from running off the Sony NPF batteries.

Hawk-Woods VLM-DC6X Mini V-Lok 15mm 12v (Reg) Power Adaptor

Hawk-Woods VLM-DC6X (VLM_DC6X, VLM/DC6X, VLM DC6X) Mini V-Lok 15mm 12v (Reg) Power Adaptor Hawk-Woods MINI version of VL-DC6X is now available. The VLM-DC6X offers a single VL fitting plate with an anodized deep back box for housing connectors and potential outputs such as fixed flying leads. The 15mm clamp is mounted to the fitting plate, this can be removed if required. This adaptor offers 4x D-TAP outputs (12v regulated). There is an option to have a fixed cable fitted to the product, please refer to our sales team or your local dealer to do this.

Hawk-Woods VLM-DC6 15mm Mini V-Lok Fitting

Hawk-Woods VLM-DC6 (VLM_DC6, VLM/DC6, VLM DC6) 15mm Mini V-Lok Fitting Hawk-Woods MINI version of VL-DC6 is now available. The VLM-DC6 offers a single V-Lok fitting plate with an anodized deep back box for housing connectors and potential outputs such as fixed flying leads. The 15mm clamp is mounted to the fitting plate, this can be removed if required.  This adaptor offers 4x D-TAP outputs (un-regulated) and 1x USB which is 5V 2A. There is an option to have a fixed cable fitted to the product, please refer to our sales team or your local dealer

Hawk-Woods VL-MCF2 RED Mini V-Lok Hotswap Camera Fitting

Hawk-Woods VL-MCF2 (VL/MCF2, VL_MCF2, VL MCF2) RED Mini V-Lok Hotswap Camera Fitting Hawk-Woods VL-MCF2 is a V-Lok fitting plate to dual V-Lok camera plate for the mini V-Lok battery system.  The adaptor will allow you to hot-swap your mini V-Lok batteries from Hawk-Woods’ current range of batteries VL-M100 and VL-M150.  This setup for the mini batteries is similar to the stack-able battery systems currently available on the market for continuous power to your equipment, however, differs in the advantage that you do not need to carry around dead weight, your batteries are technically always working with you and for you!  This adapter has been fitted with an intelligent LED system to determine battery status against the total amount of current being drawn this will give you the confidence to know when your battery needs to be changed. The LED will come on and flash at 12.7v and under meaning that your battery will soon need to be changed.  Unit comes equipped and fitted with 1x Power-con outputs.

Hawk-Woods VL-MX8 8-Channel Mini V-Lok Charger

Hawk-Woods VL-MX8 (VL_MX8, VL/MX8, VL MX8) 8-Channel Mini V-Lok Charger Our latest 8-channel V-Lok semi-sequential charger simultaneously charges four batteries at any one time, which then moves onto the other four channels. Given the chargers capability of charging 8x batteries the MX8 is still relatively small and compact compared to other chargers on the market which are of a similar size and only four channels. A fantastic option for charging your kit of batteries from a single solution. Channels one to four will charge firstly, these fittings are labelled at the front and side of charger. Channels five to eight will then charge once the charge has completed on the previous set. LED's fitted for battery status, also fitted with soft leather carry handle.

Hawk-Woods VL-B5 V-Lok Battery Belt - Dual Parallel XLR 4-pin

Hawk-Woods VL-B5 (VLB5, VL B5, VL/B5, vl-b5) V-Lok Battery Belt - Dual Parallel XLR 4-pin  The VL-B5 is a high quality leather battery belt manufactured in the UK by Hawk-Woods. V-Lok battery plates allow the user to attach V-Lok or V-Mount type batteries and utilize it as a waist mounts power source.  Very handy for powering your equipment on locations, ideal for maneuverability. Battery belts are highly convenient taking the weight off the camera, making light work of the task in hand.   This battery belt comes readily available with 2x camera fittings which will allow the use of two V-LOK batteries, These batteries will run in parallel so you will have combined wattage at nominal battery voltage. Power out can be taken from the XLR4 chassis mount on the camera fitting.   Should you require Anton-Bauer fittings please call our sales team to discuss this option. Features XLR4 chassis mount High Quality Leather   V-LOK compatible  

Hawk-Woods VL-CFA2 V-Lok Arri Amira Fitting - 3x Power-con -1x Lemo 2-pin

Hawk-Woods VL-CFA2 (VLCFA2, VL CFA2, VL/CFA2, vl-cfa2) V-Lok Arri Amira Fitting - 3x Power-con -1x Lemo 2-pin Hawkwoods VL-CFA2 has been designed to allow Arri Amira users to power the Amira from 14.4v V-Lok batteries.Features Arri Amira Direct Camera Fitting 3x Power-Con (D-Tap) Outputs 1x Lemo 2-Pin OB Output   Suitable for Arri Amira Only      

Hawk-Woods VL-FS7 V-Lock Adaptor

Hawk-Woods VL-FS7 (VLFS7, VL FS7, VL/FS7, vl-fs7) V-Lock Adaptor The VL-FS7 is a direct V-Lok fitting for Sonys FS7 camera allowing the user to use high powered V-Lok batteries rather than BPU batteries which are the standard battery for the FS7 camera. The adaptor attaches via the lock in mechanism in the FS7s battery compartment and then finally screwed to the top of the camera body to secure in place.  Users have the benefit of 5x Power-con (D-Tap) outputs 11 - 17 volts allowing further equipment/accessories to be powered from the VL-FS7. Power is provided via a short DC Sony EX Jack cable through the FS7s DC Input.  

Hawk-Woods V-Lok Battery Belt for Arricam 3P XLR (28.8V)

Hawk-Woods VL-B2 (VL_B2, VL/B2, VL B2) V-Lok Battery Belt for Arricam 3P XLR (28.8V) The VL-B2 is a high quality leather battery belt manufactured in the UK by Hawk-Woods. Two V-Lok battery plates allows the user to attach two V-Lok or V-Mount batteries and utilise it as a waist mounts power source. The battery fittings are wired in series giving a combined voltage of 28.8v via a XLR 3 pin socket ideal for powering high voltage film cameras.

Hawk-Woods NPU-SQN4S NP1 Power Adaptor

Hawk-woods NPU-SQN4S (NPU/SQN4S, NPU SQN4S, NPUSQN4S, npu-sqn4s) NP1 Power Adaptor NPU adaptors have been designed to be used with the battery standing on its end with the adaptor on top. This gives easy access to the two featured switches and LED indicator. The NPU has fully regulated outputs, a voltage selector switch allows the user to select between either 9.6 or 12 volts, depending on specific equipment being powered.  The NPU-SQN4S has four switched Hirose sockets and a Hirose(SQN) flying lead.

Hawk-Woods NPC-SQN4S 4 Aux Switched Power Adaptor SQN

Hawk-Woods NPC-SQN4S (NPC_SQN4S, NPC/SQN4S, NPC SQN4S) 4 Aux Switched Power Adaptor SQN NPC Power Adaptors have all the benifits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that the switches more accessible when its used vertically in a sound bag. The NPC-SQN4S is fitted with a Hirose(SQN) connector and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.

Hawk-Woods NPC-XLR4S 4 Aux Switched Power Adaptor XLR4 (F)

Hawk-Woods NPC-XLR4S (NPC_XLR4S, NPC/XLR4S, NPC XLR4S) 4 Aux Switched Power Adaptor XLR4 (F) NPC Power Adaptors have all the benefits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that the switches more accessible when it's used vertically in a sound bag. The NPC-XLR4S is fitted with an XLR Female connector and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.

Hawk-Woods DV-SQN4S DV Fitting-Hirose 4-pin Male 4 Hirose Outputs

Hawk-Woods DV-SQN4S (DV_SQN4S, DV/SQN4S, DV SQN4S) DV Fitting-Hirose 4-pin Male 4 Hirose Outputs  The DV-SQN4S has been designed to run directly from Hawk-Woods DV-F or Sony NPF series of batteries DV-F970 / DV-F980. The output is directly from the battery on the flying lead (60CM), set in series. So the flying lead will be up at 14v. You will need two batteries on this unit in order to take power out.  The 4x Hirose chassis mount connectors are all regulated to 12v outputs and are switched in pairs.

Hawk-Woods VLR-SQN4S Adaptor

Hawk-Woods VLR-SQN4S ( VLR/SQN4S , VLR SQN4S , VLRSQN4S ) Adaptor The stand-alone VLR-SQN4S V-Lok adaptor is an ideal option for sound recordists. It offers battery power distribution via a power-con socket, four regulated switchable hirose sockets and a Hirose plug on a flying lead.

Hawk-Woods VL-4X4 4-Channel Simultaneous V-Lok Charger

Hawk-Woods VL-4X4 (VL_4X4, VL/4X4, VL 4X4) 4-Channel Simultaneous V-Lok Charger The VL-4X4 is a 4-Channel simultaneous charger for our V-Lok Lithium-Ion Battery range. This 4Ah charger will charge up to four of these Hawk-Woods batteries at the same time.

Hawk-Woods APD Audio Power Distribution Box

Hawk-Woods APD (AP-D, AP/D, apd) Audio Power Distribution Box The Hawk-Woods APD Power Distribution Adaptor provides todays sound recordist with a massive amount of available power - and all from the industry standard NP battery range. Designed as a convenient alternative to a battery box, or similar heavy duty additional power source. The APD allows the operator to utilise the battery range most are already carrying by taking up to 6 NP batteries NP-50, NP-98. 12V regulated output is provided via four female XLRs and also by four Hirose sockets which are switched in pairs. The power potential with this piece of equipment is phenomenal; if six Hawk-Woods NP-98 batteries are inserted, there is 588 Watts of available power. With a side mounted handle, it can be either trolley-mounted or hand-held to suit individual requirements.

Hawk-Woods NPB-SQN4S NP1 Power Adaptor

Hawk-Woods NPB-SQN4S (NPB_SQN4S, NPB/SQN4S, NPB SQN4S) NP1 Power Adaptor The NPB-SQN4S is fitted with an SQN(Hirose) connector and also fully loaded with four switched auxiliaries (Hirose Connectors). These outputs are fused and a low battery voltage indicator fitted.

Hawk-Woods DV-MC4 4-Channel Simultaneous MDV Fast Charger

Hawk-Woods DV-MC4 (DV_MC4, DV/MC4, DV MC4) 4-Channel Simultaneous MDV Fast Charger The DV-MC4 is a four channel simultaneous fast charger. It has been designed for use with the DV-Link 970L and standard DV-970 batteries, plus all Sony NPF series of Li-Ion batteries. Its tough portable design allows for convenient storage, a priority when considering and new fast charger.