TILTA GSS-T01-V Float Handheld Gimbal Support System

TILTA GSS-T01-V (GSS/T01-V, GSS/T01/V, GSST01V, GSS T01 V) Float Handheld Gimbal Support System The Tilta Float System works in conjunction with the DJI RS 2 and RS3 Pro to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups. The counterweight-based post provides further stabilization for your setup beyond what the gimbal is already doing to allow for the smoothest possible free flowing camera movement imaginable. The spring-loaded arm and support vest design puts the weight of the rig onto your torso, allowing for longer operating times before the user gets fatigued. The included Wireless Thumb Controller allows you to wirelessly control the Ronin as well as a Nucleus M or Nucleus Nano follow focus motor. This unit is designed to be mounted to the yoke of your Tilta Float via the system’s Monitor Bracket. The Controller powers via Go Pro 5-8 Batteries and features a USB-C port that can be used for future firmware updates. Please note we do not recommend powering the unit via this port. The included Lower Back Support and Single Shoulder Strap provides additional weight distribution ensuring comfortable operation over any duration. Multiple power options provide more flexibly when powering the Ronin. The system can power the gimbal via Gold Mount, V-Mount, TB50, or the Battery Handle itself via optional accessories. *The Float is compatible with any gimbal under the weight limit that can mount via 1/4″-20 threads and can power via 2 Pin Lemo or an internal battery, however, it can only wirelessly control the RS2 and RS3 Pro* **The Float does not have power outputs other than the 2 Pin Lemo designed for powering the RS2** ***The Internal Post Cable can handle 14.8V and 3A with maximum ability to handle 6A***  

TILTA ARM-T03 Armorman 3.0 Gimbal Support System

TILTA ARM-T03 (ARM/T03, ARM_T03, ARMT03, ARM T03) Armorman 3.0 Gimbal Support System The Armorman 3.0 was designed to offer comfort and support while operating your gimbal by transferring the weight of the gimbal to your body’s core, taking significant weight off your arms. This allows you to operate your gimbal comfortably, for a much longer period of time while not sacrificing flexibility or performance. Two mechanical arms with shock-absorbing stabilized systems attach to the back of the adjustable vest or on top of the vest in high mode. When engaged, the arms have two adjustable tension knobs on each arm to allow you to adjust the tension in relation to the weight of your gimbal rig as well as your preferred operation style. The arms attach to any top bar gimbal system or gimbal ring system with the provided mounts or support cups, which you attach by just sliding the attachment right into the arms. Paired with the Universal Gimbal Ring Adapters and Nucleus M, the Armorman 3.0 can become a single operator system. When you’re done operating, simply disengage the arms by pulling the release cords for each arm (in regular mode) and then comfortably rest them on the sides of the vest with the attached arm receiver. This allows you to keep the vest on in-between shots and then when you’re ready to operate again, simply re-engage the arms and re-attach the gimbal. Supports systems up to 50lbs and gimbals with 25mm or 30mm diameters including the Advanced & Basic Ring Grips.