IDX VL-4X System Technology VL-4X 4-Channel V-Mount Charger with Power Supply

IDX VL-4X (VL_4X, VL/4X, VL 4X) System Technology VL-4X 4-Channel V-Mount Charger with Power Supply The VL-4X 4-Channel V-Mount Charger with Power Supply from IDX supports lithium-ion V-mount batteries and features sequential charging for four batteries, automatically switching to the second battery after fully charging the first, and it features simultaneous charging for two batteries when on opposite sides. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. It features a support stand to keep the charger upright on a flat surface.

IDX VL-2000S Simultaneous Quick Charger with 100W DC Output - 2ch

IDX VL-2000S (VL 2000S, VL2000S, VL/2000S) Simultaneous Quick Charger with 100W DC Output - 2ch The VL-2000S is a fully simultaneous 2-channel Li-ion V-Mount battery charger with a 100W DC output (4-pin XLR). Supporting LIFE PLUS mode, the latest advances in charging technology, the VL-2000S can extend battery life up to 20%. The VL-2000S features Power Base mode – the ability to utilize the mounted batteries for powering equipment via the 4pin XLR output. Low voltage batteries are safely charged with the ‘Recovery Charge’ mode. The charger also houses energy efficient circuitry that will automatically power down the charger when inactive.

IDX SL-VBD96 7.2V Li-Ion Battery for Panasonic Cameras

IDX SL-VBD96 (SL_VBD96, SL/VBD96, SL VBD96) 7.2V Li-Ion Battery for Panasonic Cameras The SL-VBD96 7.2V Li-Ion Battery from IDX is designed for select Panasonic cameras. With 9600mAh capacity, the battery provides extended runtimes on cameras such as the AG-DVX200 and AJ-PX270. It comes standard with an X-Tap and USB power ports to power camera accessories and USB devices. With a 4-LED power status indicator, users can easily identify the charge level.

IDX JP-2 Kit with 2x SSL-JVC75 Batteries and 1x LC-2J Charger

IDX JP-2 (JP_2, JP/2, JP 2) Kit with 2x SSL-JVC75 Batteries and 1x LC-2J Charger The SSL-JVC75 Lithium-Ion Battery  IDX has partnered with JVC to manufacture a high capacity Li-ion battery, designed specifically for use with the GY-HMQ10U and GY-HM600 Series Camcorders.   The SSL-JVC75 is a high capacity 7.4V, 7350mAh, 55Wh Li-ion battery  LC-2J 7.4V 2-Channel Simultaneous Quick Charger for SSL-JVC50 and SSL-JVC75 batteries The LC-2J is a 2-Channel simultaneous quick charger for the IDX SSL-JVC50 Li-ion battery.  Each channel is operated independently, so batteries can be placed on charge in any order and at any time for a quick turnaround.  The LC-2J has an ultra compact footprint, but multiple LC-2J units can be connected to create a solid charging base is required.  

IDX SD-1E Endura Single Position Power Unit 7.2V / 12V Output

IDX SD-1E (SD1E, SD 1E, SD/1E) Endura Single Position Power Unit 7.2V / 12V Output The SD-1E is another small profile V-Mount bracket which can be attached to any standard waist belt and will support up to two ENDURA batteries in PowerLink mode. Customers have a choice of simultaneous 7.2V (regulated) and/or 12V (unregulated) output to a camera or other portable equipment. The power output is via a 4-pin XLR connector.

IDX MD-NBV Multi D-Tap V-Mount Adapter Plate

IDX MD-NBV (MD_NBV, MD/NBV, MD NBV) Multi D-Tap V-Mount Adapter Plate Designed to be sandwiched between a V-Mount camera and battery or mounted on a V-Dock, the MD-NBV, has five (5) D-Taps and allows you to power accessories such as onboard monitors, lights, wireless receivers, media recorders, signal converters, etc. Max draw from each D-Tap is 24W/2A (each D-Tap independently fused), and total Max draw is 120W/10A.

IDX P-V284 Endura V-Mount Plate

IDX P-V284 (PV284, P V 284, P/V284) Endura V-Mount Plate The IDX P-V284 Endura V-Mount Plate is a 2-pin D-tap DC Out and DigiView plate that is an enhanced variation of the P-V2 Plate series. Providing an ideal solution for combining Endura V-Mount batteries to handheld cameras without the standard V-Mount style battery lock, the plate offers precise DC power connectivity. For camera systems compliant with DigiView, the remaining battery power can be displayed in the viewfinder. Featuring dual 2-pin D-taps, the plate uses 1 tap for regulated 8.4V. The second D-tap offers up to 16.8V (for IDX Lithium ion batteries) unregulated battery throughput for equipment such as lights and HDD recorders. You can use the Endura V-Mount Plate for a variety of cameras using the optional IDX cables specific to the camera models. The maximum power output available from the plate is 50W, and it measures 3.25 x 5.59 x .47" and weighs 0.40 lb.

IDX P-V212 V-Mount Plate with 2 x 2-pin D-Tap Outputs

IDX P-V212 (P_V212, P/V212, P V212) V-Mount Plate with 2 x 2-pin D-Tap Outputs The P-V212 regulates the 14.4V input from an ENDURA V-Mount Li-ion battery to output 12V, suitable for use with cameras that require this input voltage for operation. A second D-Tap connector is included. As a variation of the popular P-V2 Plate series, the P-V212 provides to the 12VDC output and includes dual D-Taps – one positioned on each side: one 2-Pin D-Tap for regulated 12VDC output and a second D-Tap for unregulated battery throughput (lights, HDD recorder, etc.).  

IDX P-V257 Endura V-Mount Plate

IDX P-V257 (PV257, P V 257, P/V257) Endura V-Mount Plate The P-V257 regulates the 14.4V input from an ENDURA V-Mount Li-ion battery to output 5V or 7.3V. The choice of output depends on the input voltage required for the camera, and can be chosen via a power select switch on the side of the unit. A second D-Tap connector is located on the opposite side which can be used to power optional camera accessories.

IDX A-AB2E V-Mount Adapter Plate

IDX A-AB2E (AAB2E, A AB2E, A/AB2E, a-ab2e) V-Mount Adapter Plate. IDX A-AB2E (AAB2E) Adaptor Bracket to fit Endura Batteries to Anton Bauer Camera Mount. This adapter locks onto 3-stud mounting plates as a temporary or transitional 3-stud converter to a V-Mount configuration. The flexibility of the converter allows ENDURA system batteries to be used on 3-stud mounting systems. Please note that when using the A-AB2E, the Digi-View function becomes disabled.

IDX A-E2LCD-2 Adaptor Bracket to Fit ENDURA Batteries

IDX A-E2LCD (AE2LCD2 A E2LCD 2 A/E2LCD/2, a-e2lcd-2) Adaptor Bracket to fit ENDURA Batteries to Panasonic LCD Monitor.A-E2LCD-2 is compatible with various LCD monitors using the industry standard VESA 100 base.  Power to the LCD is provided via the adaptor’s 4-pin pigtail XLR female connector. Please check with IDX for confirmation of LCD model compatibility.

IDX C-EB(XLR) V-Mount Battery Discharge Adaptor

IDX C-EB(XLR) (CEB(XLR) C EB(XLR) C/EB(XLR) c-eb(xlr)) ENDURA V-Mount Battery Discharge Adaptor. C-EB(XLR) is a small compact power adaptor which can be attached to any standard waist belt and will support up to two ENDURA batteries, including PowerLink mode.  It can be used in many applications to power broadcast and audio equipment.   The power output is via a 4-pin XLR connector.

IDX Vl-2Plus 2 Ch. ENDURA Sequential Fast Charger

IDX VL-2PLUS (Vl2Plus Vl 2Plus Vl/2Plus) 2-Channel, Sequential V-Mount Quick Charger with AC Adaptor (60W)    The lightweight and durable VL-2PLUS delivers sequential 2-channel charging with unrivalled high speed and reliability.    The VL-2PLUS has the advantage of an integrated 60W power supply for the camera and additional equipment.    The VL-2PLUS is a multi-chemistry charger, with the ability to charge NP type batteries using an optional A-E2NP adaptor.