SHAPE Rolling Camera Bag Backpack

SHAPE Rolling Camera Bag Backpack(SH-TBAG, SHTBAG, SH/TBAG) Designed by camera operators for camera operators, this lightweight rollaboard has a fabric exterior wrapped around an armored, rigid structure. The flexible, removable interior is a mobile base camp that protects and organizes your gear. The bag is designed to fit most carry-on size requirements, maximizing the amount of gear you can haul without a stop at baggage claim. Pull out the concealed, padded backpack straps for an easy transition from the terminal to the set. Sturdy two-stage aluminum trolley with center button control built for speed and stability. Convenient clear pockets in the full panel zip opening offer easy access to essential accessories.

SHAPE Push-button Arri rosette

SHAPE Push-button Arri rosette(SH-SPBR, SHSPBR, SH/SPBR) This silver and red Push Button with ARRI-Style Rosette Mount from SHAPE is used to mount a separately available SHAPE handgrip onto a rosette mount. A handgrip clamp mounts onto the rod for 360° adjustment. The assembly mounts onto a cage or rig using the integrated ARRI-style rosette and is secured with a locking thumbscrew. The SHAPE push button quickly allows the rod rosette to be released to rotate 360°, offering a variety of angles and handheld setups.

Shape V-mount pivoting battery plate for monitor cage

SH-VPMC SHVPMC SH VPMC SH/VPMC Shape V-mount pivoting battery plate for monitor cage Behind the monitor cage you can install an included universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide an easy access to the rear connector of the monitor. By tilting the battery plate, it becomes a stand and you can easily sit the monitor cage on the table.

Shape V-mount pivoting battery plate for Red Komodo

SH-VPKOMO SHVPKOMO SH VPKOMO SH/VPKOMO Shape V-mount pivoting battery plate for Red Komodo Pivoting Battery Plate for RED KOMODO - V-Mount SHAPE V-Mount pivoting battery plate let you adapt the Komodo dual Canon BP battery slots to a V-mount battery plate and let you Power your RED Digital Cinema Komodo 6K. Made of CNC aluminium the battery plate is designed with a 15 mm rod push-button system to let you tilt the battery plate up and down and to give you easy access to the rear connector of the camera. By simply pressing the SHAPE patented push-button, you are allowed tilt up and down to place your battery plate in the best position for your use. Push, adjust, release, and then its lock. The Hot-swap connected on one of the battery slots of the camera, allowing you to add an additional battery in the other slot so you can take advantage of the hot-swap feature. The 8″ power cable features a D-Tap connector on one end and a 2-pin LEMO-type connector on the other end. The SHAPE Push-button Made of CNC aluminium, the Universal cheeseplate features several 1/4″-20 and 3/8”-16 threaded holes.

Shape V-mount to Gold-mount regulated battery converter

SH-VGCON SHVGCON SH VGCON SH/VGCON Shape V-mount to Gold-mount regulated battery converter The SHAPE VGCON Battery Converter allows you to use V-Mount Batteries on a camera that has a Gold Mount plate, by using the Gold Mount device at the back of the V-Mount Plate. SHAPE have specifically designed the converter with a D-Tap port on the side of the converter. It is also lightweight and compact and can be easily transported.

Shape cage for Atomos Shogun 7 monitor

SH-UN7CAGE SHUN7CAGE SH UN7CAGE SH/UN7CAGE Shape cage for Atomos Shogun 7 monitor The SHAPE monitor cage is designed to provide additional protection for the for Atomos Shogun 7 monitor. The cage strongly mounts to the monitor at the top and bottom with (2) ¼-20 screws. Across all sides and rear side, the Shogun 7 cage is designed with multiple ¼-20 and 3/8-16 threaded holes with ARRI anti rotating lock system for ultimate flexibility and solidity in mounting options. The cage is also designed with an integrated locking system to secure your SSD drive to your monitor. Finally, two attachment points on both the top and bottom of the cage let you mount the Atomos Shogun 7 Sun hood frame to the cage. In option, you can use the HDMI Lock System from SHAPE (NIVLK) to protect and lock the HDMI in and out cables on the side of the Atomos Shogun 7 Monitor. Made of lightweight CNC-machined aluminium, the main bracket connects to the monitor with two custom-fit screw holes. The HDMI locking system features adjustable brackets to fit your HDMI cable size, and two captive thumbscrews are included to secure the cables tightly. The lock system keeps SSD Drive access clear, and it is also compatible with the Atomos Sun Hood.

Shape O'Connor tripod pan telescopic handle with push-button

Shape O'Connor tripod pan telescopic handle with push-button

SH-TRIPAN2 SHTRIPAN2 SH TRIPAN2 SH/TRIPAN2 Shape O'Connor tripod pan telescopic handle with push-button Shape SH-TRIPAN2 O'Connor Tripod Pan Telescopic Handle With Push-Button The SHAPE tripod pan handle is perfect for all types of cameramen, allows you to comfortably position your O’Connor tripod on set, in all types of situations such as in a limited space, a higher position or a tight closet. The telescopic handgrip with rosette can be attached to your O’Connor tripod. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arm position. The ratchet knob along the arm allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. For a shorter configuration, you can easily disassemble the push-button rubber handgrip from the telescopic arm and mount it to the rosette adapter. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape On-set AC Belt & Pouch Tool Kit

Shape camera bag

SH-SBAG SHSBAG SH SBAG SH/SBAG Shape camera bag The black Camera Bag with Removable Pouches from SHAPE provides organised storage for video cameras up to 20″ long plus multiple accessories. This bag features three removable pouches with MOLLE straps for tools, cables, and pens. Its exterior sports a silent, magnetic lid, dual zippered front pockets, a slate/flag pocket, a bottle pocket for canned air, and hook-and-loop surfaces for easy labelling. This neatly designed case features a fully padded interior with four zippered lid pockets, LED light zipper pulls to help see your gear, and a removable rain cover. Carry your SHAPE Camera Bag using its adjustable, padded shoulder strap or top grip handles.

Shape Cage for Atomos Shinobi monitor with 15mm LWS swivel rod clamp

SH-OBIROD SHOBIROD SH OBIROD SH/OBIROD Shape Cage for Atomos Shinobi monitor with 15mm LWS swivel rod clamp Cage for Atomos Shinobi monitor (OBICAGE) The SHAPE monitor cage is designed to provide additional protection for the for Atomos Shinobi monitor. The cage strongly mounts to the monitor at the top and bottom with (2) ¼-20 screws. Across all sides and rear side, the Shinobi cage is designed with multiple ¼-20 and 3/8-16 threaded holes with ARRI anti rotating lock system for ultimate flexibility and solidity in mounting options. The cage features an HDMI cable lock designed to protect the HDMI cable and port. It also features two attachment points on both the top and bottom of the cage to accommodate the Atomos Ninja V Sun hood frame. DSLR swivel 15 mm rod clamp (SWROD) Mounts to 15 mm rods Swivel allows change in the angle Secure its position by changing the pin One lever to control 15 mm holes Change angle by loosening the lever Versatile and multiple possibilities 15 mm LW clamp for top handle (15CTH) The clamp is made of CNC aluminium and can be attach behind the monitor cage. The clamp is designed to support a 15 mm lws rod. The ratchet knob device let you adjust and strongly fix the position of the rod to the cage. The SHAPE Swivel Rod Clamp (SWROD) is an articulated part that mounts to 15 mm rods. Clamp designed to support a 15 mm rod Can be attach to the monitor cage Made of CNC aluminium 15 mm 6″ rods (15TUBE6) (1) 15 mm Aluminium Rods (6″) connect into the monitor cage into the rod clamp, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. The rod is hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape Nucleus double quick trigger grips

SH-NDQTG SHNDQTG SH NDQTG SH/NDQTG Shape Nucleus double quick trigger grips The two clamps relocator let you mount the left and right Tilta Nucleus-M wireless handle grip to the body frame of SHAPE quick handle rod bloc with Push-button system (HAND15). The combination of these two let you have the best handheld stabilizer on the market in addition to the Tilta Nucleus-M properties. Once installed, you can take advantage of the full potential of our Push-button technology.

Shape Single Double Quick Handle with ARRI Rosette (Shadow)

SH-HAND2S SHHAND2S SH HAND2S SH/HAND2S Shape Single Double Quick Handle with ARRI Rosette (Shadow) Left or right ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort. The arm attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. The arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape Gold mount pivoting battery plate for monitor cage

SH-GPMC SHGPMC SH GPMC SH/GPMC Shape Gold mount pivoting battery plate for monitor cage The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide an easy access to the rear connector of the monitor. By tilting the battery plate, it becomes a stand and you can easily sit the monitor cage on the table.

Shape Sony FX9 Top plate

SH-FX9TP SH FX9TP SHFX9TP SH/FX9TP Shape Sony FX9 Top plate Lightweight and robust CNC machined aluminium top plate designed to fit around the native Sony FX9 top handle. The top plate offers an array of (12) 1/4-20 and (12) 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The Sony FX9 top plate is also designed with a threaded hole to insert your FX9 sensor pin and your FX9 viewfinder cable clamp.

Shape Sony FX6 Remote Extension Handle and cable

SH-FX6RH, SH-FX6RH, SH-FX6RH, SH-FX6RH Shape Sony FX6 Remote Extension Handle and cable The Remote Extension Handle for the Sony FX6 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FX6 remote grip away from the camera while retaining full remote functionality. Compact for both storage and travel, the arm measures just 5.6″ when folded and may be increased to a maximum length of 11″ for use. A length adjustment range of 2″ is also provided to the user for a more customized and comfortable fit. The handle easily mounts to the Sony FX6 camera using an ARRI-style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male-to-female LANC extension cable connects the remote grip to the camera’s body, maintaining full functionality after relocation. The coiled male-to-female cable features a LANC 3.5 mm male connector on one end and female on the other. It measures 10″ from end-to-end when coiled, and approximately 20″ when extended. The arm itself features SHAPE’s patented push-button release which allows the joint to be rotated a full 360° to any required angle. SHAPE is well known for its patented push-button system, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustments. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then it’s locked!

Shape Sony FX6 D-Tap power cable with 19.5 V output

SH-FX6PC SHFX6PC SH FX6PC SH/FX6PC Shape Sony FX6 D-Tap power cable with 19.5 V output Shape FX6PC (FX6-PC) Sony FX6 D-Tap Power Cable with 19.5 V output. Please Note: Only D-Tap Power Cable Included - all other accessories pictured are for display purposes. The SHAPE 19.5V output D-Tap power cable for Sony FX6 regulates the voltage from a D-Tap source to the proper 19.5V required to power an FX6 camera. This allows you to power your camera using any V-mount or Gold mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″.

Shape Sony FX3 Cage

SH-FX3CAGE SH FX3CAGE SHFX3CAGE SH/FX3CAGE Shape Sony FX3 Cage SHAPE FX3CAGE (FX3-CAGE) Cage for Sony FX3. CNC-milled aluminium cage specifically designed to protect and support the Sony FX3. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple ¼-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter.  

Shape Universal Bridge Plate Arri standard

SH-DPLWS SHDPLWS SH DPLWS SH/DPLWS Shape Universal Bridge Plate Arri standard Shape DPLWS (DPLWS) Universal Bridge Plate Arri Standard. The SHAPE bridge universal plate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options. It is made of CNC aluminium and it is also designed with a locking lever to secure the bridge plate to the dovetail. One 1/4″-20 and one 3/8″-16 screw allow mounting a variety of cameras and rod baseplates. The Standard ARRI-Style Sliding Bridge Plate is used with a separately available dovetail plate to balance your camera as the weight of the rig is changed. The rubberized surface prevents the camera or rod baseplate from scratching and slipping. By adding this adapter plate, you can keep working with your proprietary 15mm LWS for any given camera, in a dovetail approach.

Shape Universal Bridge Plate and 12-inch Dovetail Plate Arri standard

SH-DPKLW SHDPKLW SH DPKLW SH/DPKLW Shape Universal Bridge Plate and 12-inch Dovetail Plate Arri standard SHAPE ARRI Standard 15mm Studio Bridge Plate & 12′′ Dovetail Plate Kit This lightweight and strong aluminum body ARRI Standard 15mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate; it uses 15mm rods (12′′) and 15mm Studio Offset Spacing (rods spaced 100mm center to center).Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. Thereis also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings. The SHAPE Lightweight ARRI Standard 12′′ Dovetail Plate allows you to quickly and easily balance the weight when using front or back heavy camera equipment. It also features an easy-to-access stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. The dovetail also provides several 1/4′′-20 and 3/8′′-16 threaded holes for tripod plateattachment. It can be attached to a shoulder pad for custom handheld configurations.

Shape 15mm studio spacing cuff rod block Arri rosette

SH-CUFST SH CUFST SHCUFST SH/CUFST Shape 15mm studio spacing cuff rod block Arri rosette Shape 15 MM Studio Spacing Cuff Rod Block Arri Rosette The SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.

Shape 19mm studio cuff rod block Arri rosette

SH-CUF19 SHCUF19 SH CUF19 SH/CUF19 Shape 19mm studio cuff rod block Arri rosette SHAPE CUF19 (CUF-19) 19mm Studio Cuff Rod Block Arri Rosette. The SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.

Shape 15mm LWS cuff rod block Arri rosette

SH-CUF15 SHCUF15 SH CUF15 SH/CUF15 Shape 15mm LWS cuff rod block Arri rosette Shape SH-CUF15 15 MM LWS Cuff Rod Block Arri Rosette The SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.

Shape controller top handle universal attachment system

SH-CTRL SHCTRL SH CTRL SH/CTRL Shape controller top handle universal attachment system Add a variety of accessories to your camera rig with the Controller Top Handle with Universal Attachment System from SHAPE. The modular handle features four sections that can be removed or re-added to create different lengths and configurations. One of the sections is angled to create a handgrip on the end. The centre section raises up the handle, allowing a solid connection to your cage or rig.The handle is constructed from anodised aluminium, and each section is lined with a smooth, wooden finger grip made from Canadian maple. Numerous 3/8″-16 ARRI-style anti-twist accessory threads line the handle, so you can add a wide variety of accessories.

Shape Canon C500 Mark II/C300 Mark III V-lock quick release baseplate

SH-C52BP SH C52BP SHC52BP SH/C52BP Compact REVOLT shoulder baseplate (BP20) The compact REVOLT shoulder baseplate (BP20) is a lighter version of the REVOLT VCT universal baseplate (BP10). The main differences is that the BP20 is not designed with the front-to-back sliding plate and there is a bracket system with magnet allowing you to swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles mount and there is also a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. 15 mm 4" rods (15TUBE4) This pair of SHAPE 15 mm Aluminium Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. 15 mm 8" rods (15TUBE8) Pair of 15 mm rods 8″ long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn’t perfectly aligned or is at a slight angle to the rod clamp.

Shape BNC 1st AC camera cable kit

SH-BNKI SHBNKI SH BNKI SH/BNKI Shape BNC 1st AC camera cable kit Shape SH-BNKI BNC 1st AC Camera Cable Kit The SHAPE two-sided organiser cable pouch is a full-on organiser. The deep side can also fits chargers, microphones and other larger accessories, and the shallow side keeps cables neatly organised and untangled with its built-in elastic loops. The 10-inch (25.4 cm) length will fit most popular wireless microphones without needing to bend the antenna. The deep side has a short top zipper for quick access, and the cable side has a zip-around flap for easier organisation. The SHAPE two-sided organiser cable pouch is the ultimate solution for organising everything from cables, chargers and batteries to light meters, radio triggers and microphones. It allows small gear to be easily corralled, securely transported, and quickly moved from one bag to another.

Shape 1st AC Camera cable kit BNC/HDMI/DTAP/LANC

SH-BHDL SHBHDL SH BHDL SH/BHDL Shape 1st AC Camera cable kit BNC/HDMI/DTAP/LANC Shape SH-BHDL 1st AC Camera Cable Kit BNC, HDMI, DTAP, LANC Side 1 LANC coil cable male-female 10″ (LANCO10) x 1 LANC coil cable male-male 11″ (LANCO11) x 1 Skinny (2.5mm) 90-degree male to male BNC cable 24 in, 60.96 cm (black, blue) x 2 Skinny (2.5mm) 90-degree male to male BNC cable 12 in, 30.48 cm (green) x 1 Skinny (2.5mm) 90-degree male to male BNC cable 6 in, 15.24 cm (red) x 1  Side 2 D-TAP to 4-pin XLR coiled cable (DTXLC) x 1 D-TAP splitter cable (SDSC) x 1 20″ coiled cable vdc D-Tap to D-Tap (DTAP20) x 1 24″ HDMI to HDMI coiled cable (HDMI4k) x 1 24″ HDMI to mini HDMI coiled cable (MINI4K) x 1 24″ HDMI to micro HDMI coiled cable (MICRO4K) x 1  SHAPE Two-Sided organiser cable pouch The SHAPE two-sided organiser cable pouch is a full-on organiser. The deep side can also fits chargers, microphones and other larger accessories, and the shallow side keeps cables neatly organised and untangled with its built-in elastic loops. The 10-inch (25.4 cm) length will fit most popular wireless microphones without needing to bend the antenna. The deep side has a short top zipper for quick access, and the cable side has a zip-around flap for easier organisation. The SHAPE two-sided organiser cable pouch is the ultimate solution for organising everything from cables, chargers and batteries to light meters, radio triggers and microphones It allows small gear to be easily corralled, securely transported, and quickly moved from one bag to another.  

Shape Gold Mount to V-Mount Regulated Battery Converter

Shape SH-GVRPC (SH GVRPC, SH_GVRPC, SH/GVRPC, SHGVRPC) Gold Mount to V-Mount Regulated Battery Converter The Shape Gold Mount to V-Mount Regulated Battery Converter is a lightweight battery adapter plate that lets you power cameras or lights that have an integrated V-mount battery plate with a Gold mount battery. The converter incorporates a regulated D-Tap output for powering accessories.

Shape V-Mount Plate for Canon C300 Mark II

Shape SH-UMPCII (SH/UMPCII, SH UMPCII, UMPCII, sh-umpcii) V-Mount Plate for Canon C300 Mark II Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Canon C300 Mk II Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and four plate-mounting screws are included with the plate.

Shape Quick Release V-Lock Adapter

Shape SH-QUICK (SHQUICK, SH/QUICK, SH QUICK, QUICK, sh-quick) Quick Release V-Lock Adapter The SHAPE Quick Release V-Lock Adapter attaches to the camera platform of your tripod, monopod, or support rig, providing a standard V-lock mounting interface. It is designed for use with SHAPE's optional V-lock "Delta Adapter" camera plate, but will also work with any camera plate that utilizes a V-lock mounting system. CNC machined from a solid aluminum block, the adapter supports loads up to 50 pounds and features one 1/4"-20 and two 3/8"-16 threaded mounting holes. A locking system with a release button on the side of the plate allows for quick removal of your V-lock camera plate.

Shape Delta Marbel Quick Release Kit

Shape SH-DELTAQUICK (SHDELTAQUICK, SH/DELTAQUICK, SH DELTAQUICK, DELTAQUICK, sh-deltaquick) Delta Marbel Quick Release Kit The SHAPE Delta Marbel Quick Release Kit includes a V-lock delta quick release plate and V-lock delta quick release adapter that you can use to quickly mount any camera to any support platform. Featuring one 1/4"-20 thread and one 3/8"-16 thread, the quick release plate can be attached to the camera platform of any tripod or video rig. The quick release adapter features two 1/4" holes, attaches on the bottom of your camera, and allows quick release mounting/dismounting on and off the plate. A simple push of a release button on the side of the quick-release plate releases the adapter and allows you to remove your camera. The plate supports loads up to 50 lb. All the necessary screws are supplied. The adapter attaches to your camera along with an included, thin camera plate. The camera plate has stoppers on the back that will keep the camera from twisting sideways. The camera plate and stoppers are both adjustable to support different-size cameras, and the stoppers can be removed completely to make room for full-size cameras. An alignment screw is included to secure the camera plate in place. The quick release adapter is also compatible with third party V-lock delta plates, such as the Sony VCT-U14.

Shape V-Mount Plate for Canon C100/C300/C500

Shape SH-UMPC1 (SHUMPC1, SH/UMPC1, SH UMPC1, UMPC1, sh-umpc1) V-Mount Plate for Canon C100/C300/C500 Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Canon C100/300/500 Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and six plate-mounting screws are included with the plate.

Shape V-Lock Plate with D-Tap for Blackmagic URSA

Shape SH-UMPBU (SHUMPBU, SH/UMPBU, SH UMPBU, UMPBU, sh-umpbu) V-Lock Plate with D-Tap for Blackmagic URSA Pair this V-Lock Plate from SHAPE with a V-Mount battery to provide the specific voltage and amperage for running a Blackmagic URSA Camera. Using a pro-style V-Mount battery (not included) will give you an extended runtime, compared to using the camera's standard internal battery. You'll appreciate the longer operating time over the course of a long shooting day, or when recording in cold weather. The V-Lock Plate incorporates a D-Tap port with a maximum 50W output for powering accessories. A DC camera power cable and four plate-mounting screws are included with the plate.

Shape MICRO4K Coiled HDMI to Micro-HDMI Cable (24'')

Shape SH-MICRO4K (SH_MICRO4K ,SHMICRO4K, SH/MICRO4K, SH MICRO4K) (MICRO-4K, MICRO/4K) MICRO4K Coiled HDMI to Micro-HDMI Cable (24'') Interface high-definition devices with the MICRO4K Coiled HDMI to Micro-HDMI Cable from SHAPE. For component connections, it features a full-size HDMI connector on one end and a micro-HDMI connector on the other end. This cable is 24" when coiled and can be extended up to 36". Its coiled design allows the cable to work in installations where shorter cables are desired.

Shape D-TAP20 12 VDC D-Tap Male to D-Tap Male Coiled Cable (20'')

Shape SH-D-TAP20 (SH_D_TAP20, SHD-TAP20, SH/D-TAP20, SH D-TAP20) (D/TAP20, D_TAP20) D-TAP20 12 VDC D-Tap Male to D-Tap Male Coiled Cable (20'') The Shape 20 "Coiled Cable 12 VDC D-Tap to D-Tap is a sturdy, 76 cm long power supply cable that allows two Anton Bauer (D-Tap) connectors to connect the Atomos Shogun battery to an external power source.

Shape SH-CPVALX Cheese Plate and V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-CPVALX (SH_CPVALX, SHCPVALX, SH/CPVALX, SH CPVALX) Cheese Plate and V-Mount Battery Plate for ARRI ALEXA Mini Camera This item features a Cheese Plate and a V-Mount Battery Plate to power your Alexa Mini Camera. The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig. A 10" cable connects to the Alexa Mini's power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape SH-CPGALX Cheese Plate and Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-CPGALX (SH_CPGALX, SHCPGALX, SH/CPGALX, SH CPGALX) Cheese Plate and Gold Mount Battery Plate for ARRI ALEXA Mini Camera This item features a Cheese Plate and a Gold Mount Battery Plate to power your Alexa Mini Camera. The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the Alexa Mini’s power input and provides the necessary amount of power to the camera.

Shape SH-ALEXVM V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXVM (SH_ALEXVM, SHALEXVM, SH/ALEXVM, SH ALEXVM) V-Mount Battery Plate for ARRI ALEXA Mini Camera Our V-Mount battery plate provides the right battery voltage and amperage to use with your ALEXA Mini camera.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input. Additional accessories can also be powered off the P-Tap port.

Shape SH-ALEXGM Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXGM (SH_ALEXGM, SHALEXGM, SH/ALEXGM, SH ALEXGM) Gold Mount Battery Plate for ARRI ALEXA Mini Camera The Gold Mount ALEXA Mini Battery Plate is perfect to power your ALEXA Mini camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input and provides the necessary amount of power to the camera.

Shape SH-CPVRD Cheese Plate and V-Mount Battery Plate for RED Camera

Shape SH-CPVRD (SH_CPVRD, SHCPVRD, SH/CPVRD, SH CPVRD) Cheese Plate and V-Mount Battery Plate for RED Camera This item features a Cheese Plate and a V-Mount Battery Plate to power your RED camera.  The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the RED’s power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape Cheese Plate and Gold Mount Battery Plate for RED Camera

Shape SH-CPGRD (SH_CPGRD, SHCPGRD, SH/CPGRD, SH CPGRD) Cheese Plate and Gold Mount Battery Plate for RED Camera This item features a Cheese Plate and a Gold Mount Battery Plate to power your RED camera.  The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the RED’s power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.  

Shape Gold Mount Battery Plate for RED Camera

Shape SH-REDGM (SH_REDGM, SHREDGM, SH/REDGM, SH REDGM) Gold Mount Battery Plate for RED Camera The Gold Mount RED Battery Plate is perfect to power your RED camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the RED's power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II

Shape SH-CP300M2 (SHCP300M2, SH/CP300M2, SH CP300M2, CP300M2, sh-cp300m2) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a ROD BLOC for Mounting. Perfect to Mount any accessories such as; Shape MAGIC ARM, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC LEMO cable with the standard output voltage for C300 Canon Mark II series cameras.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras

Shape SH-CP300 (SHCP300, SH/CP300, SH CP300, CP300, sh-cp300) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a Rob Bloc for mounting. Perfect to mount any accessories such as; Shape Magic Arm, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC Lemo cable with the standard output voltage for C300 Canon Mark II series cameras.  

Shape Gold Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5

Shape SH-CPGEVA (SHCPGEVA, SH/CPGEVA, SH CPGEVA, CPGEVA, sh-cpgeva) Gold Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5 The Gold Mount Battery Cheese Plate from SHAPE features a cheese plate and a Gold mount battery plate to power your Panasonic AU-EVA1, Sony FS7, or FS5 cameras. The cheese plate is designed with a 15mm Rod Bloc system with one ratchet knob for quickly fixing the plate to your camera rig. The included 22" regulated D-Tap cable can connect to the ALEXA Mini's power input.

Shape V-Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5

Shape SH-CPVEVA (SHCPVEVA, SH/CPVEVA, SH CPVEVA, CPVEVA, sh-cpveva) V-Mount Battery Cheese Plate for Panasonic AU-EVA1 & Sony FS7/FS5 The V-Mount Battery Cheese Plate from SHAPE features a cheese plate and a V-mount battery plate to power your Panasonic AU-EVA1, Sony FS7, or FS5 cameras. The cheese plate is designed with a 15mm Rod Bloc system with one ratchet knob for quickly fixing the plate to your camera rig. The included 22" regulated D-Tap cable can connect to the ALEXA Mini's power input.

Shape Top Plate for Panasonic AU-EVA1 Camera

Shape SH-EVATP (SH-EVATP, SH/EVATP, SH EVATP, EVATP, sh-evatp) Top Plate for Panasonic AU-EVA1 Camera Mount our AU-EVA1 top plate to your camera with 1/4-20 stainless screws. Lightweight and robust CNC machined aluminum plate designed to support and facilitate the manipulation of your Panasonic AU-EVA1. The top plate offers an array of 1/4" and 3/8" threads which can be used to attach options around the camera, for example, our top handle and EVF mount bracket (also compatible with Panasonic's AU-EVA1 original top handle).

Shape 2 x V-Mount Battery Plates and Cable Kit for Atomos Sumo

Shape SH-2VMAB (SH2VMAB, SH/2VMAB, SH 2VMAB, sh-2vmab) 2 x V-Mount Plates & D-Tap Cables for Atomos Sumo These 2 x V-Mount Plates from SHAPE enable you to power your Atomos Sumo monitor using longer-lasting, pro-style batteries. Two D-Tap to right-angle 4-pin XLR power cables are included with the battery plates.

Shape 2 x Gold Mount Plates & D-Tap Cables for Atomos Sumo

Shape SH-2GMSB (SH2GMSB, SH/2GMSB, SH 2GMSB, sh-2gmsb) 2 x Gold Mount Plates & D-Tap Cables for Atomos Sumo These 2 x Gold Mount Plates from SHAPE enable you to power your Atomos Sumo monitor using longer-lasting, pro-style batteries. Two D-Tap to right-angle 4-pin XLR power cables are included with the battery plates.  

Shape CP33 Cheese Plate with IDX Plate

Shape SH-CP33IDX (SH_CP33IDX, SHCP33IDX, SH/CP33IDX, SH CP33IDX) CP33 Cheese Plate with IDX Plate The Shape CP33 Cheese Plate with IDX Plate is a 15mm rod-mount cheese plate with an IDX V-Mount battery plate screwed onto one side. The plate is 1/4" thick and features 33 threaded holes for accessories to be screwed into. These holes run end to end, from one side of the plate to the other. Four of the holes are 10/32" and the rest are 1/4" and 3/8". The IDX plate covers many of the holes from one side, but you can still screw into these holes from the other side as long as the screws are not much longer than the 1/4" thickness of the plate. The holes at the very corners of the plate are untouched by the IDX plate and can be used to attach accessories or devices like AJA's Ki Pro Mini. Screws are included for a Ki Pro Mini and for an Anton Bauer battery plate. The cheese plate is precision-machined as one piece.