TILTA ESR-T15-V Camera Cage for Sony Venice 2 - V Mount

TILTA ESR-T15-V (ESR/T15-V, ESR/T15/V, ESRT15V, ESR T15 V) Camera Cage for Sony Venice 2 - V Mount Expand the functionality of your Sony Venice Camera Body with our new Camera Cage for Sony Venice 2! The frame of this cage is constructed from a high quality, CNC-milled aluminum alloy that offers additional protection and mounting options for accessories. The cage itself supports accessories via Cold Shoe, NATO Rail, 1/4″-20 threads and 3/8″-16 threads with locating pins. The updated Battery Plate for Sony Venice 2 comes in both Gold Mount or V-mount and integrates with the Top Plate via an external cable, which provides reliable power and communication to the cage’s various ports. This cable also accommodates and is fully compatible with the larger size of the external recording module that can be attached to the rear of the camera. This greatly expands your options for powering accessories and wirelessly triggering the camera. The Top Plate utilizes a built-in communication cable similar to our previous Venice System and provides Run Stop functionality to all of the cage’s 3-Pin Fischer R/S ports. The Venice’s EVF can also be mounted to the Top Plate via 15mm LWS rods that can be secured near the front of the plate. The Top Handle features an adjustable design that allows it to easily slide on and off of the Top Plate which is compatible with the Venice’s Original Top Handle as well. This is a convenient solution for quickly adjusting the balance of the camera after a lens change or when adapting the camera for Steadicam/Gimbal setups. An optional Top Handle Extension can be mounted to expand the handle so that it wraps around the Battery Plate. This offers some additional mounting options as well as a unique way to operate the camera especially at lower angles. The Baseplate includes a built-in shoulder pad and is natively compatible with Tilta-Standard Dovetails. An optional Tilta Standard to Arri Standard Multi-Functional Baseplate can be utilized to adapt this cage to mount onto an Arri Standard Dovetail if needed. Compatible with both the Sony Venice and Sony Venice 2!

TILTA ESR-T13-RES-V Camera Cage and Backpack System for Sony Venice Rialto - V Mount

TILTA ESR-T13-RES-V (ESR/T13-RES-V, ESR/T13/RES/V, ESRT13RESV, ESR T13 RES V) Camera Cage and Backpack System for Sony Venice Rialto - V Mount Arm your camera with this Tilta camera cage specifically designed for the Sony Venice Rialto. It provides a high quality aluminum, CNC-milled protective armor for the sensor block of the camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. A battery plate, available in either gold mount or V-mount, can be mounted to the back of the sensor block. This then sends power to a 3-pin Fischer and 2-pin Lemo port on the front of the cage to allow you to power accessories. The included 3-pin Fischer cable sends communication from the camera’s 3-pin communication port to a 3-pin Fischer port on the back of the cage which then sends R/S functionality to a 3-pin R/S port on the front of the cage. Note: this R/S port can only send run stop and cannot provide power to any accessories. Two extension arms and wooden handles are included in the kit to allow you to attach to the cage’s two Arri standard rosettes that are on the sides, giving you a comfortable way to operate. The kit also includes a backpack that incorporates a dovetail and small baseplate to mount the camera body onto so that you have a comfortable, ergonomic way to operate and transport your whole Rialto camera setup.  

TILTA ESR-T13-RB-V Sony Venice Rialto Backpack

TILTA ESR-T13-RB-V (ESR/T13-RB-V, ESR/T13/RB/V, ESR T13 RB V, ESRT13RBV) Sony Venice Rialto Backpack The Sony Venice Rialto Backpack incorporates a dovetail and small baseplate to mount the Rialto camera body onto. When coupled with the sensor block’s cage, it provides you with a comfortable, ergonomic way to operate and transport your whole Rialto camera setup. The backpack also has a battery plate.

TT-C06-D-07 19mm Studio Tilta-Standard to ARRI-Standard Base Plate

TILTA TT-C06-D-07 (TT/C06-D-07, TT/C06/D/07, TTC06D07, TT C06 D 07) 19mm Studio Tilta-Standard to ARRI-Standard Base Plate This 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy.

TILTA UBP-V Universal Battery Plate

TILTA UBP-V (UBP/V, UBP_V, UBPV, UBP V) Universal Battery Plate Universal Battery Plate is designed to be used with a variety of camera systems. It’s available in either V-mount or gold mount versions and has several different power outputs as well as SDI in/out ports. Simply attach one of the various available P-tap cables from one of the P-tap outputs on the battery plate and connect the other end into your camera’s power input port. This provides an efficient way to power your camera as well as external accessories that you’d like to use in your setup. *Note: The Tilta Universal Battery Plate does NOT come with a camera power cable. Power Cables for specific cameras must be purchased separately. Please check the input voltage of your camera to insure adequate power. Never over power your camera with a power cable as this may burn out your camera. Tilta is NOT responsible for user error in over powering your camera devices.

TILTA ESR-T08-BP-AB Battery Plate for RED V-RAPTOR - Gold Mount

TILTA ESR-T08-BP-AB (ESR/T08-BP-AB, ESR/T08/BP/AB, ESRT08BPAB, ESR T08 BP AB) Battery Plate for RED V-RAPTOR - Gold Mount This Battery Plate adapts the RED V-RAPTOR’s Micro V-Mount Battery Plate to either a Gold Mount or Full Sized V-Mount Battery Plate as well as provides a convenient slot to power and mount the Advanced I/O Module (not included). The V-Mount option features an adjustable plate that allows you to fine tune the height of your battery in relation to the camera body. This allows you to better accommodate different sized batteries and helps keep your build balanced and clean. When using our Top Plate, you can install the Battery Plate Security Attachment for an additional point of contact between your Battery Plate and Camera Cage.

TILTA ES-T20-BTP-V Battery Plate for Sony FX6

TILTA ES-T20-BTP-V (ES/T20-BTP-V, ES/T20/BTP/V, EST20BTPV, ES T20 BTP V) Battery Plate for Sony FX6 This Battery Plate quickly mounts and locks into the battery chamber of the Sony FX6 and can be further secured by a connection to the Multi Functional Top Plate. This allows you to use higher capacity Gold or V-Mount batteries to power your camera setup, keeping battery swaps to a minimum. *Please Note the Battery Plate must be connected via the FX6’s DC port to provide power*

TILTA ES-T18-BTP-V Battery Plate for Sony PXW-FX9 - V-Mount

TILTA ES-T18-BTP-V (ES/T18-BTP-V, ES/T18/BTP/V, EST18BTPV, ES T18 BTP V) Battery Plate for Sony PXW-FX9 - V-Mount The Tilta Battery Plate for Sony PXW-FX9 Cage attaches directly to the back of the top plate on the Tilta FX9 Camera Cage and hugs the back side of the camera. The battery plate provides several different power outputs to allow you to power accessories and adjusts to various distances from the camera body.

TILTA BS-T10 15mm Quick Release Baseplate for Sony FS7

TILTA BS-T10 (BS/T10, BS_T10, BST10, BS T10) 15mm Quick Release Baseplate for Sony FS7 15mm LWS baseplate is used in conjunction with the Tilta for Sony FS7 camera rig. It’s set up as both a standard baseplate that can be attached to Sony VCT-U14 plates as well as an ergonomic shoulder pad, making it easy to go from tripod to handheld operating in no time. It also features mounting points for 15mm LWS rods on the back and front to allow you to use 15mm rods in a variety of ways (such as mounting accessories on the front and counterweights and/or a battery plate on the back). This plate also features Arri Standard Rosette connections on the left and right side to be able to attach hand grips for handheld operation.

TILTA BS-T01 15mm LWS Baseplate for Red DSMC2

TILTA BS-T01 (BS/T01, BS_T01, BST01, BS T01) 15mm LWS Baseplate for Red DSMC2 A 15mm LWS baseplate is used in conjunction with the Red DSMC2 line of Tilta camera cages. It’s set up to easily attach to the Tilta Standard Lightweight Dovetail Plate and has a very low profile to make your camera setup as compact as possible.