DPA 4060 CORE+ Omni Boundary Layer Microphone

DPA 4060-OP-D-S01-002 (4060/OP-D-S01-002, 4060/OP/D/S01/002, 4060OPDS01002, 4060_OP_D_S01_002) 4060 CORE+ Omni Boundary Layer Microphone The 4060 Omni Mic is the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise. This mic solution is ideal for use in boardrooms, conference facilities, and courtrooms. It is also a great solution for teleconferencing and other applications where excellent vocal pickup is required. The 4060 Omni Boundary Layer Mic is a transducer designed to work under optimum conditions when placed on a tabletop, but it also performs well on any other hard, flat surface that reflects sound. The microphone is a pre-polarized omnidirectional miniature condenser microphone with a 5.4 mm (0.2 in) vertical diaphragm. The mic body consists of a central rubber disc that holds the mic element mounted in an elegant stainless steel base. The 4060 Omni Boundary Layer Mic can be very easily placed in essentially any position on the surface of a table, even close to the edge. Users will benefit from the special characteristics of the surrounding sound field on which the mic is mounted: a 6 dB gain of direct sound and only a 3 dB gain of the diffuse sound. The sound captured has both greater clarity, especially at high frequencies, and speech intelligibility compared to sound captured above the surface. The 4060 Omni Boundary Layer Mic uses CORE by DPA technology and features two M5 threaded holes on the backside of the unit, which means that it can be permanently affixed to the table. Furthermore, the slim cable can be run either through or along the table. A wide range of connection adapters and power supplies makes it possible to use the 4060 Omni Boundary Layer Mic with any microphone input. It is delivered with a DAD6001 XLR Adapter, but as the supplied cable is terminated with a DPA MicroDot connector this microphone can be connected to a wireless system via the flexible adapter system.

DPA MMP-F15 Mmp-F Modular Active, 15Cm With Gooseneck Entire Length

DPA MMP-F15 (mmp/f15, MMP/F15, MMP_F15, mmp_F15) Mmp-F Modular Active, 15Cm With Gooseneck Entire Length For podium or stylish floor stand applications, the MMP-F preamp series is available in different lengths and gooseneck choices. All equipped with state-of-the-art preamp design and sleek appearance, they fit any d:dicate modular capsule. Excellent radio frequency rejection is obtained through the DPA designed impedance balancing with active drive. Custom lengths (up to 120cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.

DPA Modular Active Boom, 47 cm (18 in)

DPA MMP-F45 (MMPF45, MMP/F45, MMP F45, MMP.F45) Modular Active Boom, 47 cm (18 in) The d:dicate MMP-F Modular Active Boom, 47cm with Gooseneck Top by DPA Microphones is a preamplifier and output stage for DPA Reference Standard MMC series capsules. The modular capsule attaches to the MMP-F preamplifier. When used with a DPA microphone capsule it provides power for podium, floor stand, or table top microphone. The MMP-F provides and XLR output and 48V phantom power via an external source. It features impedance balancing with active drive and has excellent radio frequency rejection. The optional stands are sold separately. Compatible With The Following Capsules: MMC4006 Omni Microphone Capsule MMC4007 Omni Microphone Capsule, 12mm MMC4011 Cardioid Microphone Capsule MMC4015 Wide Cardioid Microphone Capsule  MMC4017 Shotgun Microphone Capsule MMC2006 Twin Diaphragm Omni Microphone Capsule  MMC2011 Twin Diaphragm Cardioid Microphone Capsule Hidden mounting holes below the top cover allow for permanent mounting to any flat surface, and it looks   

DPA Modular Active Boom, 32 cm (13 in)

DPA MMP-F30 (MMPF30, MMP/F30, MMP F30, MMP.F30) Modular Active Boom, 32 cm (13 in)  The d:dicate MMP-F Modular Active Boom, 30cm with Gooseneck Top by DPA Microphones is a preamplifier and output stage for DPA Reference Standard MMC series capsules. The modular capsule attaches to the MMP-F preamplifier. When used with a DPA microphone capsule it provides power for podium, floor stand, or table top microphone. The MMP-F provides and XLR output and 48V phantom power via an external source. It features impedance balancing with active drive and has excellent radio frequency rejection. The optional stands are sold separately. Compatible With The Following Capsules: MMC4006 Omni Microphone Capsule MMC4007 Omni Microphone Capsule, 12mm MMC4011 Cardioid Microphone Capsule MMC4015 Wide Cardioid Microphone Capsule  MMC4017 Shotgun Microphone Capsule MMC2006 Twin Diaphragm Omni Microphone Capsule  MMC2011 Twin Diaphragm Cardioid Microphone Capsule Hidden mounting holes below the top cover allow for permanent mounting to any flat surface, and it looks  just great. It can be ceiling-mounted upside down or positioned on top of a table.