Manfrotto PL Frontloader backpack M

PL Frontloader backpack M, MB PL2-BP-FL-M (MB-PL2-BP-FL-M, MB_PL2-BP-FL-M, MB/PL2-BP-FL-M, PL2-BP-FL-M) The Manfrotto PRO Light Frontloader camera backpack M is a professional camera bag specifically designed to provide unparalleled gear protection to fit the preference and workflow of any professional photographer or filmmaker.For professional photographers and filmmakers working on assignments, the camera bag that carry and protect their cameras are equally crucial in making the creative process happen. The PRO Light backpacks usher in the all-new M-Guard™ Protection System specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-Guard™ dividers are made of high-density EVA foam that provide exceptional shock absorption while maintaining a super slim profile . In addition, the SAS-TEC, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcement on the base of the backpack provide extra shock absorbing properties. For an even better worry-free experience, a TSA padlock can be used to secure the steel wire puller to close the main compartment.The PRO Light Frontloader offers a fully padded gear compartment with customizable interiors that can be accessed through a front access door. A secondary single side door offers quick access to most used gear that can fit a full frame camera without portrait grip with an attached 70-200mm f/2.8 lens with a service pocket on the interior panel for crucial small accessories. It features a side tripod attachment, a checkpoint friendly 15” laptop compartment, adjustable chest and waist straps, along with a DuoFace sun and rain cover for moisture and heat protection.A compartment with multiple pockets for small accessories is positioned on the front to give you fast access to all your working accessories.This backpack is built to keep professional gear protected while providing optimal comfort even in long periods of carrying . The harness system not only distributes weight evenly from the shoulders to the waist and hips but also maximizes breathability thanks to a contoured EVA mesh panel.The backpack is made of water-repellant RipStop nylon/polyester fabric with reinforcement yarns to achieve a balance of light weight, unique look, and high capacity performance. Duraflex hardware, YKK zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use to ensure long-term protection for large amounts of gear. It also conveniently comes with a DuoFace sun/rain cover, which provides extra protection in rough weather and reflects sunlight, keep gear cool and dry all day long.

Manfrotto Reloader Tough H-55FOAM;Roller

Reloader Tough H-55FOAM;Roller, MB PL-RL-TH55-F (MB_PL-RL-TH55-F, MB-PL-RL-TH55-F, MB/PL-RL-TH55-F, PL-RL-TH55-F) The new PRO Light Reloader Tough H-55 case is designed for travelling professional photographers and videographers. Hermetic, waterproof, and impact resistant, these Tough cases are built to resist to the toughest conditions of use and certified to resist temperatures from °C min -33 / max +90 (°F min -27.4 / max +194 );Built to perfectly protect all types of equipment contents and based on lightweight materials with a secure release latch system. They are IP67 tested meaning that there is no ingress of dust and withstands temporary immersion in water for 30 minutes. Manufactured and designed in Italy, the Tough H-55 is ideal for travellers who do not want to compromise between safety and portability. This case fits airline carry-on size restrictions* and is provided with a two stage telescopic handle with self-locking system to prevent unwanted opening when carrying and transporting, and the automatic pressure release valve provides automatic regulation of the interior air pressure when on a flight. The two wheels have a larger diameter, silent and stable during transport, giving optimal stability, strength, and made to be durable to last over time. The new PRO Light Reloader Tough H-55 is provided with 4 layers of pre-cubed foam and convoluted foam for the lid. The convoluted foam in the lid helps to firmly keep the stored equipment when the case is closed. The 4 layers of pre-cubed foam allows you to customize the insert to your own indsividual equipment and the four layers help for an easier initial setup and arrangement. The Tough H-55 features exclusive design functions that make it compatible with Manfrotto Tough Modular accessories. Four metal pins allow you to easily attach Tough Tripod bag and laptop bag (sold separately) for a more modular carrying experience.*Always check with your airline before flying for their current carry-on requirements.

Manfrotto PL Multiloader backpack M

PL Multiloader backpack M, MB PL2-BP-ML-M (MB-PL2-BP-ML-M, MB_PL2-BP-ML-M, MB/PL2-BP-ML-M, PL2-BP-ML-M) The Manfrotto PRO Light Multiloader camera backpack is a professional camera bag specifically designed to provide unparalleled gear protection to fit the preference and workflow of any professional photographer or filmmaker.For professional photographers and filmmakers working on assignments, the camera bag that carry and protect their cameras are equally crucial in making the creative process happen.The PRO Light backpacks usher in the all-new M-Guard™ Protection System specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-Guard™ dividers are made of high-density EVA foam that providing exceptional shock absorption while maintaining a super slim profile. In addition the SAS-TEC, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcement on the base of the backpack provide extra shock absorbing properties. For an even better worry-free experience, a TSA padlock can be used to secure the steel wire puller to close the main compartment.The PRO Light Multiloader offers 4 points off access for the ultimate carrying flexibility. The main front access door opens into the fully padded camera gear compartment. Two side doors allow for quick access to strategically placed cameras or lenses for a quick gear change, and the top access allows for a quick grab of the most used gear.The Multiloader backpack offers an entirely modular bag that has 3 different carrying configurations. With the use of different combinations of the harness and straps, it can be carried as either a backpack for maximum comfort, a sling bag for speedy lens changing, or as a duffle bag for on-the-go full gear access.It also offers a side attachment that can carry a full-sized tripod (up to the 055 series) and a front attachment that can be split into 2 to carry monopods or small light stands. It also features a checkpoint friendly 15” laptop compartment, adjustable torso height, double chest straps and a padded waist belt for load distribution.This backpack is built to keep professional gear protected while providing optimal comfort even in long periods of carrying. The harness system not only distributes weight evenly from the shoulders to the waist and hips but also maximizes breathability through a contoured EVA mesh panel. The backpack is made of water-repellant Ripstop nylon/polyester fabric with reinforcement yarns to achieve a balance of light weight, unique look, and high capacity performance.Duraflex hardware, YKK zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use to ensure long-term protection for large amounts of gear. It also comes with a DuoFace sun/rain cover, which provides extra protection in rough weather and reflects sunlight, keep gear cool and dry all day long.

Manfrotto AVCSA1301B Triple C Roller Case

Manfrotto AVCSA1301B (MAN-AVCSA1301B, MAN/AVCSA1301B, MANAVCSA1301B, MAN_AVCSA1301B, man_avcsa1301b) Triple C Roller Case This ultra-tough, hardwearing case is designed and built for the professional imagemaker working on location. It allows them to transport all their essential C-Stand accessories in one convenient carrying solution, ensuring everything is easily accessible and close to hand when arriving at a shoot. With its external dimensions of 128cm x 28cm x 40cm (50.4in x 11in x 15.7in) this roller case has plenty of storage capacity and can carry up to a maximum load of 35kg (77.1lbs). Tailored for carrying up to three turtle base (detachable) C-Stand kits and accessories, the spacious main compartment features high-density closed cell and cross link foam dividers to create three sections for detachable C-Stand columns and a fourth section with adjustable reinforced straps to securely stow extension arms. Includes two removable padded storage trays, ideal for grip heads, clamps and other small accessories, keeping equipment safe and secure. Up to three C-Stand turtle bases can be neatly stored by securely fastening them to the inner lid dividers using the adjustable quick release webbing straps, keeping them separate from the rest of the gear and making it easy to access the right components quickly. The large internal zip pocket is ideal for foldable light controls such as flags and scrims, this pocket can be split into two using the Velcro fastening and features a viewing window making it easy to find even the smallest accessory. The shell of this rugged case is constructed from hard ABS honeycomb and durable water-resistant 900D Polyester, with high quality YKK® RC zippers with moulded grip pull cords throughout. It also features strong anti-abrasion protective reinforcement in key high wear areas, as well as durable rubber feet, bumpers and back rails to further protect the case when navigating uneven terrain and obstacles. The strong exterior padded handles on the top and side panels and replaceable shock-absorbing wheels allow for both single and two-person handling for ease of manoeuvrability on location. Two large zip pockets which help to keep essential tools and accessories easily available and a convenient luggage tag holder allows for clear identification. All of these features combined with the black finish, Avenger blue detailing, bold branding and crafted design make this all in one carrying solution stylish as well as functional. The perfect carrying solution allowing the creative imagemaker to arrive on set ready to roll!