Dedolight DPOW6LEM-10 Extension cable for DT3-BI-BAT ballast.

Dedolight DPOW6LEM-10 (DPOW6LEM_10, DPOW6LEM10, DPOW6LEM/10, DPOW6LEM 10) Extension cable for DT3-BI-BAT ballast. 10m, 33' extension cable for DLED3 and DT3 ballasts. This extension cable uses a Lemo 6 male, to Lemo 6 female configuration. This can be coupled with one more to extend to 66'.  

Dedolight DLTCH Dedoflex holder, compact

Dedolight DLTCH (DLT CH, DLT-CH, DLT_CH, DLT/CH) Dedoflex holder, compact  Dedolight - Compact holder for dedoflex reflectors and diffusors as well as for dedoflex 5in1 MultiDiscs.      

Dedolight DP2S-0 Projection attachment with built-in framing shutter blades for DLED2 and DLED3 LED light heads.

Dedolight DP2S-0 (DP2S_0, DP2S 0, DP2S/0, DP2S0) Projection attachment with built-in framing shutter blades for DLED2 and DLED3 LED light heads.  Dedolight - Please order projection lens separately (Approx. 50mm - DPL50M/60mm - DPL60M/85mm - DPL85M). DP2S is manufactured with fixed framing shutters for to provide absolute precision – clean, and wide even field down to the facet of a diamond. After hearing your frustrations over using loose shutters in the Imager projector, we decided you needed a dedicated shutter projector. The DP2S-0 Is a dedicated shutter blade imager meaning you don't have to fumble around with loose shutters anymore as they are integrated into the projector. This version of the small projector does NOT have a lens (choose you own or use an existing). This projector allows users the ability to light something as small as a match head, or a razor thin line, without losing any color and keeping perfect resolution of your 4-sided shape if you choose your edges to be in focus.This is yet another exclusive system for any dedolight user's style of production, especially product and tabletop work. The DP2S dedicated shutter projector fits at the accessory slot of all DLED2 and DLED3 light head models.  To shop for your own lens set, or if you already have a lens, look for the DP2S-0 version with only the shutter projector and no lens. If you are annoyed using low-resolution imagers which created chromatic aberrations, you'll want to try this projection system to know your alternatives. Quite frankly, there is no comparison; nothing can do what dedolight projectors can do.      

Dedolight DPBA-OB7 Ledzilla intensifier, large. No light head

Dedolight DPBA-OB7 (DPBAOB7, DPBA/OB7, DPBA OB7, DPBA_OB7) Ledzilla intensifier, large. No light head The DPBA-OB7 Parallel Beam Intensifier increases light output up to 403% (with Ledzilla-BI set at appx 5600k). Like all Ledzilla accessories, this beam intensifier uses the lock and turn "bayonet" attachment. When used, adjust the flood/spot knob on the back of the light to the flood position; the new beam generated by this lens is about 4° in width and amazingly brighter. It's simply incredible for use with smaller reflectors (up to 25cm) for intimate interview lighting, or powerful tabletop lighting setups. Parallel Beam Intensifiers, unique only to dedolight focusing lights, make using multiple Lightstream reflectors from one light source possible, as well as establishes a controlled virtual light source from the reflecting surface. "Lightstreaming" with Parallel Beam Intensifiers completely brings the reflectors to life in a systematic way with undeniably beautiful results. This tool provides a powerful new function your dedolight which nothing else can do on the market.       

Dedolight DPBA-L7 Parallel Beam intensifier LED monocolor, 7cm diameter Fits DLED4-D, DLED4-T, DLED7-D, DLED7-T

Dedolight DPBA-L7 (DPBA_L7, DPBAL7, DPBA/L7, DPBA L7) Parallel Beam intensifier LED monocolor, 7cm diameter Fits DLED4-D, DLED4-T, DLED7-D, DLED7-T  Dedolight - Parallel Beam attachment for DLED4-D, DLED4-T, DLED7-D, DLED7-T (Approx. mono color)      

Dedolight DPBA-L6 Parallel Beam intensifier LED monocolor, 6cm diameter. Fits DLED2-D. used with DPBA-7HON honeycomb

Dedolight DPBA-L6 (DPBA_L6, DPBAL6, DPBA/L6, DPBA L6) Parallel Beam intensifier LED monocolor, 6cm diameter. Fits DLED2-D. used with DPBA-7HON honeycomb  The DLED2-D light head now has the option of a parallel beam attachment, making it the smallest adapter available for this head. This attachment boasts an impressive 84% increase in output compared to the native spot position. Not only does the PB adapter boost the light fixture's output, but it also creates a virtual light source distance, resulting in a more realistic and atmospheric quality to the lighting and shape. This new parallel beam attachment for the DLED2-D light head is a game-changer for those looking for increased output and enhanced lighting effects. With its compact size and impressive performance, it offers a convenient and efficient solution for achieving high-quality lighting in any setting. Whether for professional use or personal projects, the PB adapter is a valuable addition to the DLED2-D light head.        

Dedolight DPBA-L1821 Parallel Beam intensifier LED monocolor, 21cm diameter. Fits DLED12-D, DLED30-D. used with DPBA-21HON honeycomb

Dedolight DPBA-L1821 (DPBA_L1821, DPBAL1821, DPBA/L1821, DPBA L1821) Parallel Beam intensifier LED monocolor, 21cm diameter. Fits DLED12-D, DLED30-D. used with DPBA-21HON honeycomb This DPBA-L1819 Parallel Beam Intensifier increases light output up to an astonishing 351% (DLED30). Simply used by sliding in at the light's accessory slot and adjusting to the flood position; the new beam generated by this lens can be from 6° - 8° spread angles, depending on light model used. Parallel Beam Intensifiers, unique only to dedolight focusing lights, make using multiple Lightstream reflectors from one light source possible, as well as establishes a controlled virtual light source from the reflecting surface. "Lightstreaming" with Parallel Beam Intensifiers completely brings the reflectors to life in a systematic way with undeniably beautiful results. This tool provides a powerful new function your dedolight which nothing else can do on the market.       

Dedolight DMTSB420-SR Tripple stud boom with sliding receptacle. Length 42 cm.

Dedolight DMTSB420-SR (DMTSB420SR, DMTSB420_SR, DMTSB420/SR, DMTSB420 SR) Tripple stud boom with sliding receptacle. Length 42 cm. The Triple Stud Boom with Sliding Receptacle from Dedolight is 42cm in length.      

Dedolight DFX400T10-LB Structure effect glass filter, Farrago, light blue

Dedolight DFX400T10-LB (DFX400T10/LB, DFX400T10LB, DFX400T10 LB, DFX400T10_LB) Structure effect glass filter, Farrago, light blue Dedolight - Each pattern is available in 8 highly saturated dichroic colors: Yellow Orange (Approx. O), Purple (Approx. P), Light Blue (Approx. LB), Red (Approx. R), Magenta (Approx. M), Yellow (Approx. Y), Turquoise (Approx. T), Light Green (Approx. LG)      

Dedolight DPOW5XLR-10 10m extension cable for DLED4 and DLED9 light heads

Dedolight DPOW5XLR-10 (DPOW5XLR/10, DPOW5XLR_10, DPOW5XLR10, DPOW5XLR 10) 10m extension cable for DLED4 and DLED9 light heads  This 32.8' Extension Cable from Dedolight is designed to work with the DLED4 and DLED9 light heads.        

Dedolight DEB400H Ballast holder with CLAMP-D

Dedolight DEB400H (DEB4-00H, DEB4/00H, DEB4 00H, DEB40_0H) Ballast holder with CLAMP-D  The Dedolight DEB400H is a mounting bracket, complete with Super Clamp for the DEB400 electronic ballast. This allows the ballast to be mounted to your light stand.    

Dedolight DLWASR Wide angle attachment with rotating barn door leaves for DLED2 and DLED3 Series

Dedolight DLWASR (DLWA/SR, DLWA_SR, DLWASR, DLWA-SR) Wide angle attachment with rotating barn door leaves for DLED2 and DLED3 Series The Wide-Angle Aspheric Lens with Rotating Barndoors from Dedolight is a light control accessory that fits onto the M-sized Dedolight classic and Neo heads. The aspheric wide-angle lens focuses the light for your creative work. Swing one or more leaves of the barndoors into the path of the fixture's beam to light your subject selectively. Additionally, the rotating leaves give the ability to cut trapezoidal shapes. Add the lens attachment and the focusing range of your Dedolight will achieve an astonishing 1:55 ratio. When combined with this optical accessory, the native light will deliver an adjustable angle from 4.5 to 90°.        

Dedolight DBDS 8-leaf barn door with rotatable leaves for DLED2-DLED3 light heads

Dedolight DBDS (DBD S, DBD/S, DBD_S, DBD-S) 8-leaf barn door with rotatable leaves for DLED2-DLED3 light heads  These Rotating 8-Leaf Barndoors for DLED2.1 LED Lamp Head from Dedolight helps control and contour this fixture's beam spread. The barndoors rotate around the head for maximum convenience and flexibility.      

DTN7CPlus Power Supply dedolight for light head neo color

Dedolight DTN7CPlus (DTN7C Plus, DTN7C/Plus,  DTN7C_Plus, DTN7C-Plus) Power Supply dedolight for light head neo color The DTN7C+ Neo Color Ballast for the NEO Color Balance focusing light from Dedolight allows the light head to be operated manually by using the analog control knob and the intuitive menu via OLED display, or wirelessly using DMX, LumenRadio CRMX, WiFi or Bluetooth Mesh using the free to download app. It is supported by a variety of wired and wireless lighting controllers and consoles as well as the free Chroma Link app from Prolycht. Control of multiple DLED7C light heads in-app provides a myriad of options including x, y coordinates for precision gamut selection, hundreds of built-in gel equivalents, dozens of built-in light source equivalents, and an array of customizable preset effects. It has an integrated V-mount battery tray for use on locates where AC power is unavailable, and offers multi-voltage AC operation for worldwide use when paired with the optional DLPS15-100 AC/DC V-Mount adapter. NOTE: Requires DPOWN7C-3 or DPOWN7C-10 head cable. Features At a Glance Linear or Exponential curve modes Continuous smooth, 1000 step dimming: 0.1-100% V-Mount socket DC 15V nominal input(12-18 VDC) 90-250 VAC input with optional DLPS15-100 AC/DC V-Mount adapter ChromaLink App supporting Bluetooth and Wi-Fi connection Intuitive manual control with haptic feedback knob OLED display screen 80W max output      

Dedolight DT9-DMX Power supply with DMX control for DLED9-D-T 90-264 V AC, Great Britain cable

Dedolight DT9-DMX (DT9DMX, DT9 DMX, DT9/DMX, DT9_DMX) Power supply with DMX control for DLED9-D-T 90-264 V AC, Great Britain cable The Dedolight DT9.1-DMX AC Power Supply for DLED9.1 LED Lights is a multi-voltage, dimming power source for both the tungsten and daylight versions of the DLED9.1 lamp head. It comes with an 8.2' mains cable and a 4.6' head cable. It weighs 3.1 lb. The power supply allows remote control via DMX.      

Dedolight DT9 Power supply for DLED9-D -T-UV365-UV400

Dedolight DT9 (DT 9, DT/9, DT-9, DT_9) Power supply for DLED9-D -T-UV365-UV400 The Dedolight DT9.1 AC Power Supply for DLED9.1 LED Lights is a multi-voltage, dimming power source for both the tungsten and daylight versions of the DLED9.1 lamp head. It comes with an 8.2' mains cable and a 4.6' head cable. It weighs 3.1 lb.        

Dedolight DT7-DMX Power supply with DMX control for DLED7-D-T TURBO light heads 90-264 V AC, Great Britain cable

Dedolight DT7-DMX (DT7DMX, DT7/DMX, DT7_DMX, DT7DMX) Power supply with DMX control for DLED7-D-T TURBO light heads (90 - 264 V AC, Great Britain cable) Power up a daylight or tungsten DLED7 Turbo Series LED light and remotely control it with this DT7-DMX AC Ballast from Dedolight, which features a universal voltage of 90-264 VAC as well as a 5-pin XLR input and output for DMX support. This ballast provides support for dimming for control over your light.         

Dedolight DT4x150 Power Supply for 4-DLH4, 4P - 150 Watts, 24 Volts 120V AC

Dedolight DT4x150 (DT4-x150, DT4_x150, DT4/x150, DT4 x150) Power Supply for 4-DLH4, 4P - 150 Watts, 24 Volts (20V AC The Dedolight dimmable, universal DT4X150U power supply provides 24 volts @ 150 watts, for 4- DLH4 light heads. The DT4X150U may be only used with the DLH4 Aspheric 2 light heads, with 110-120 volt AC current. Available in 4 different input versions for worldwide use: DT241U for 120V, DT241E+ for 240V, and DT241J for 100V AC operation. Variable function switch for 3200° or 3400° Kelvin operation.      

Dedolight DT4-BI-DMX Power supply with DMX control and digital display for Kelvin values for DLED4-BI

Dedolight DT4-BI-DMX (DT4_BI-DMX, DT4/BI-DMX, DT4BI-DMX, DT4 BI-DMX) Power supply with DMX control and digital display for Kelvin values for DLED4-BI  This Dedolight DT4-BI-DMX Power Supply (90-260 VAC) is a small, lightweight power source for the DLED4 bi-color balanced head. The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100 - 20%. The DT4-BI-DMX comes with an 8.2' mains cable. Allows worldwide use from 100 to 260 VAC 50/60 Hz cycle plus continuous dimming For Dedolight DLED4 bi-color head        

Dedolight DT2-BAT-IR DC dimmable ballast for DLED2Y-IR860-IR960 light heads to use with 12V or 24V batteries

Dedolight DT2-BAT-IR (DT2 BAT-IR, DT2_BAT-IR, DT2/BAT-IR, DT2BAT-IR) DC dimmable ballast for DLED2Y-IR860/-IR960 light heads to use with 12V or 24V batteries Use this DT2-BAT-IR ballast to control the DLED2Y-IR model light heads. It's dimmable down to 5% and powers from any 6V to 18V DC power source (using Type-A jack, OD is 5.5mm, ID is 2.5mm). The featherweight light is an incredibly powerful on-board unit weighing only 1 pound (light head only) and consumes only 20w of power. The unit comes with a female Hirose5, 28" head cable.        

Dedolight DLED10-BI Focusing LED light head, bicolor

Dedolight DLED10-BI (DLED10_BI, DLED10BI, DLED10/BI, DLED 10BI) Focusing LED light head, bicolor The Focusing 220W Bi-Color LED Lamp Head from Dedolight is a powerful, compact, focusing LED light well suited to mobile drama production, interviews, as well as for in-studio lighting and larger lighting tasks. This LED lamp only requires and external power supply.Spot to Flood FocusZoom through the full 4-50° spot-to-flood range with a quick twist of the focusing collar. A 44-75° spread is possible using the wide angle accessory, available separately. Fan Cooled The whisper-quiet fan cooled is virtually silent for video-based applications.          

Dedolight DTHVM Mini V-Lock Ballast Holder incl Clamp

Dedolight DTHVM (DTH VM, DTH-VM, DTH_VM, DTH/VM) Mini V-Lock Ballast Holder incl Clamp The V-Lock C-Clamp Ballast Stand Adapter from Dedolight is designed for use with their DT DLED, DTneo, DTneo+, ballasts. The two-piece system allows you to mount your ballast on stands and pipes up to 1.5" in diameter. One component bolts to your ballast and the other clamps to the pipe or stand of your choice. A quick release v-lock connects the two components and makes it easy to quickly mount and position your equipment. A high-quality steel and aluminum construction ensures durability and security.        

Dedolight DPOWN7C-10 Cable, light head to power supply, 10m for DLED7N-C

Dedolight DPOWN7C-10 (DPOWN7C10, DPOWN7C_10, DPOWN7C/10, DPOWN7C 10) Cable, light head to power supply, 10m for DLED7N-C This is the DPOWN7C-10, 33ft head cable is used between dedolight NEO multi-color head (DLED7N-C) and the DTneoC+ ballast.  This cable carries both power and data.  It cannot be daisy chained as to protect the integrity of the data signal. Also available in 9ft (DPOWN7C-3).                

Dedolight DLED7N-C Focusing 90W Turbo LED light head neo color, RGBACL

Dedolight DLED7N-C (DLED7NC, DLED7N_C, DLED7N/C, DLED7N C) Focusing 90W Turbo LED light head neo color, RGBACL A portable and versatile lighting solution, the Neo Color Lamphead from Dedolight features a powerful 80W adjustable focusing spotlight with a 6:1 flood to spot ratio and an RGBACL full color spectrum output. The red, green, blue, amber, cyan, and lime engine provides a wide color gamut throughout an extended 2000-20,000K CCT range with high CRI/TLCI ratings of 97/95 for accuracy. The Neo Color can be used in an extensive range of situations, especially with the ability to focus the beam angle from 60-10°. The light has a compact size and is useful as an accent light. Its bi-color functionality makes it ideal for maintaining accurate and pleasing skin tones. The LED light can be controlled via Prolycht's free ChromaLink app that features built-in gel equivalents, an array of customizable lighting effects, and more. Its system is also controlled via a separately available DTneoC+ Ballast with an intuitive OLED display and DMX, LumenRadio CRMX, WiFi, or Bluetooth Mesh functionalities. Power can be supplied by a separetely available V-mount battery or AC power supply via the required Ballast. This LED lamp requires a separately available external power supply.   LED light exclusively developed by Dedolight for precision optics and Prolycht for color technology Control your light remotely with the DMX compatible DTneoC+ Ballast DTneoC+ Ballast: on-board OLED display, built-in DMX, LumenRadio CRMX, WiFi, or Bluetooth Mesh connectivity Accepts Dedolight's Series M accessories Compatible with DP1.2 and DP2.2 imagers White point management with Magenta/Green adjustments Saturated colors Multi-light head recognition with the ChromaLink smartphone app from Prolycht ChromaLink App: X/Y coordinates, color picker for environmental light replication, and more        

Dedolight DLED4N-T Focusing 40W LED light head neo, tungsten

Dedolight DLED4N-T (DLED4NT, DLED4N_T, DLED4N/T, DLED4N T) Focusing 40W LED light head neo, tungsten Dedolight DLED4 Focussing 40W LED Portable Tungsten Fixture that is powerful & versatile. Dedolight have combined their award winning optical system with their own colour correct LED technology to come out with yet another beautifully engineered award winning lighting fixture Perfect color in Bi-Color , daylight and tungsten versions   A great gift for mobile work, 3200K.br> Thus adapting to most ambient light situations without any filters. Easy fine-tuning for slightly warmer fill light or somewhat colder back light – separating the background illumination by subtle color choices.br> Dimming: Proprietary dimming algorithms for smooth dimming, even at the low end   16-bit dimming for special studio demands as option   AC and DC ballasts   Battery operation: High output – best efficiency – low power demands allowmobile teams to operate for hours, totally independent from AC power supplies. Belt clip holds battery (V-lock or AB), as well as the battery ballast and comes with a stand mounting loop.   Studio versions also available as pole-operated and with DMX control   Unique light-/shadow-shaping accessories – most of these are especially designed to cooperate with our highly developed optical system   Tools to modify the light and color character. Such tools are available for all sizes of Dedolight lights.   DT4-E Dedolight Power Supply for DLED4-D/T - 90-260VAC              

Dedolight DLED3N-BI Focusing 40W TURBO LED light head neo, bicolor

Dedolight DLED3N-BI (DLED3NBI, DLED3N/BI, DLED3N_BI, DLED3N BI) Focusing 40W TURBO LED light head neo, bicolor The Dedolight DLED3N Bi-Color and Daylight Head needs the Dedolight DTN Ballast to work (not included)The new DTN dedolight neo LED ballast will drive all dedolight LED Systems from 20 to 90 Watt: Monocolor, Bi-Color, Infrared & Ultraviolet. It is based on a novel technical platform of advanced electronics and packed in a housing with a unified connector layout. The system will auto sense the connected lighthead and adjust the electronic settings and display. Interchangeable attachments allow battery or AC operation. Accessory for mounting can be attached through the extrusion profile rail.            

Dedolight Telephoto Projection Lens

Dedolight Telephoto Projection Lens(DPL185M) Metal barrel, f3.5. Has the longest focal length of the Dedolight projection lenses.

Dedolight softbag Case

Dedolight softbag Case(DSCPA5) Dedolight - sturdy soft case, especially for the PanAura 5 Kit (Approx. SPA5T-S / DSOCTT-S).

Dedolight Backpack for Lighting Gear

Dedolight Backpack for Lighting Gear(DBP) tore and transport the classic Dedolights and the 200 Series / SUNDANCE fixtures in this DBP Backpack from Dedolight. An addition to their portable studio product line, the bag fits 4 DST Stands along with one of the following three equipment sets: 4 DLHM4-300 lights, 3 DLH4 lights and 3 in-line dimmable power supplies, or 2 DLH200D lights. It also accommodates 1 DLH1000SPLUS light, or 1 DLH200S light and 3 DEB200D electronic ballasts. Additionally, the pack has space for spare lamps and 1 soft box up to a 5' Octodome. To achieve the best possible balance, the stand compartment is in the middle of the bag and the light head compartments are on the side. Individually adjustable interior dividers enable customization. Two horizontal belts contribute to stability and security of the transported equipment, including the soft box. For comfortable carrying, the backpack features adjustable padded shoulder straps, an adjustable chest/sternum strap, and a padded waist belt, as well as top and side grip handles. It is crafted from durable ballistic nylon.

Dedolight DPBA-10 Honeycomb

Dedolight DPBA-10 Honeycomb(DPBA-10HON) Honeycomb for diminishing stray light. Fits: DPBA-610, DPBA-710.

Dedolight Bicolour LED light head

Dedolight Bicolour LED light head(DLOBML-BI) The Dedolight Mini-DLOB 2 LED On Board-Light is the second generation of this well-engineered versatile neat fixture taking advantage of the latest LED chip technology giving great output coupled with control and high colour fidelity for great skin tones. Dimming is also possible without introducing colour shift. Its double aspheric optics enable the light to be focused remarkably accurately especially for an LED light, and the head will easily accept attachments to modify the light source.

Dedolight Soft Case Kit with Four Reflector Surfaces

Dedolight Soft Case Kit with Four Reflector Surfaces(SEFL-4) Reflected light for creative elements and backgrounds. The multi-mirror reflectors can be bent and shaped for a multitude of light effects for projection, not only on the background, but also on persons. Neutral effects can simulate light spots and speckles as they can be seen when sunlight or moonlight falls through leaf structures of trees or bushes. Laminated color effect filters look super simple, but offer an amazing variety of effects. The light heads can be used in their original version or in conjunction with the parallel beam attachment for expanded power use and additional variation of effects. When using the parallel beam attachments, the useful light is doubled. Not only in the mini set, also in the big studio such effects can be used. Easy and quick setup for the professional in television, video and in photography.

Dedolight Large EFLECT Mirror Kit #1

Dedolight Large EFLECT Mirror Kit #1(SEFL-1) Reflected light for creative elements and backgrounds. The multi-mirror reflectors can be bent and shaped for a multitude of light effects for projection, not only on the background, but also on persons. Neutral effects can simulate light spots and speckles as they can be seen when sunlight or moonlight falls through leaf structures of trees or bushes. Laminated color effect filters look super simple, but offer an amazing variety of effects. The light heads can be used in their original version or in conjunction with the parallel beam attachment for expanded power use and additional variation of effects. When using the parallel beam attachments, the useful light is doubled. Not only in the mini set, also in the big studio such effects can be used. Easy and quick setup for the professional in television, video and in photography.

Dedolight Parallel Beam Intensifier for Light Heads

Dedolight Parallel Beam Intensifier for Light Heads(DPBA-714) This DPBA-714 Parallel Beam Intensifier increases light output up to 313% (DLH4). Simply used by sliding in at the light's accessory slot and adjusting to the flood position; the new beam generated by this lens can be from 4° - 8° spread angles, depending on light model used. Fits DLED7-BI, DLED7-D, DLED7-T, DLED4-BI, DLED4-D, DLED4-T or DLH4.

Dedolight Lightstream Reflector Kit

Dedolight Lightstream Reflector Kit(SLR7R-4) The Dedolight SLR7R-4 Lightstream Reflector Kit is the perfect lighting solution for photographers and videographers. This soft bag kit includes 4 reflectors in the compact size of 7x10 cm, making it easy to transport and use on location. The kit consists of reflectors #1, #2, #3, and #4, as well as extra accessories for versatile lighting options. The high efficiency of the reflectors in this system is due to their reflective values, with an impressive 95-98% of light being effectively reflected. When used with Parallel Beam adaptors, the quality of light and shadows becomes uniquely realistic, adding depth and dimension to your shots. The Dedolight SLR7R-4 Lightstream Reflector Kit features four different reflector types, each with a different surface for specific lighting effects. Reflector #1 is the closest to a very hard reflector, redirecting light without changing the beam size or character. It has a surface structure that provides reflection with a minimal exit angle of about 4°. Reflector #2 has a wider exit angle of 12°, making it more suitable for use with secondary reflectors with larger surfaces. Although it shows slightly less light intensity at the object, the total amount of reflected light remains consistent at 95-98%. For a gentler reflection, Reflector #3 covers an angle of 50°, while Reflector #4 has the widest angle of 95° and produces the most gentle reflection. This results in lower light levels reaching the object, making it ideal for close-up shots. In fact, when compared to commonly used styrofoam, Reflector #4 has comparable light intensity values reaching the object. The use of reflectors #3 and #4, or styrofoam, minimizes the effect of the square law when talent is moving. This is because the reflector surface itself becomes a light source, changing the influence of the square law and ensuring consistent exposure values. With the Dedolight SLR7R-4 Lightstream Reflector Kit, you can achieve professional lighting results with ease.

Dedolight DLR5-25x25 Lightstream Reflector

Dedolight DLR5-25x25 Lightstream Reflector(DLR5-25X25) *** Special order item New reflector surface style! Updated reflectors now come with protective corner ID covers for easier selection from the pouch. #5 surface Lightstream reflector in the 25x25cm size. Lightstream reflectors are the newest surface in the reflector family that reshapes the host beam into a very narrow strip of light, much narrower than the anamorphic ratio. This light sculpting is traditionally done with barn-doors or flag, but these tools waste the light that hits them. In addition with reflected light, the nature of the beam and control over the edges is very different. The beam from #5 drops off wider/longer than doors would achieve. The #5 is particularly useful to light a staircase, a doorway, corridor, tunnel or get the "beam-me up Scotty effect" from above. Note that results from lights without narrow spot beams vary unpredictably. For controlled, systematic and maximum results, use a dedolight with Parallel Beam Intensifier. All Lightstream reflector boards transfer over 95% of the total lumens generated from its light source. The back of Lighstream reflectors feature a dove-tail (sliding rail) to mount with the all-aluminum DLR-LOCK (baby receptacle), DLR-LOCK-M (baby pin) or DLR-MLOCK motorized mount. 

Dedolight Stand

Dedolight Stand(DST) Standard Dedolight Kit stand for the DLED4, DLED7 and DLH4, DLHM4 and DLH200 series of lights. Will work with any small head and reverse folds to fit into all the Dedo DSC soft cases and most Dedo Hard cases.  Also fits into dedicated stand bag: DSCST

Dedolight DTHC Power supply holder incl. CLAMP-C

Dedolight DTHC (DL-DTHC, DL/DTHC, DL_DTHC, dthc) Power supply holder incl. CLAMP-C This Power Supply Holder from Dedolight comes with the CLAMP-C so that users can attach their power supply to a pipe or stand measuring 0.51-1.0" in diameter. The clamp also has an internal 1/4" thread.

Dedolight HTP4x150S High Temperature Pouch for DLH4x150S

Dedolight HTP4x150S (DL-HTP4x150S, DL/HTP4x150S, DL_HTP4x150S, htP4x150s) High Temperature Pouch for DLH4x150S This is a Dedolight Hi-Temp Pouch for storing a DLH4X150 fixture. Hi-Temp Pouches are made from Supersil -- a space technology textile material which can withstand temperatures up to 2000°F (1100°C). Use the pouch to pack a hot soft light on the run, and to protect the soft light's glass tube. This pouch is large enough to store a DLH4X150 fixture, which measures 8.9 x 6.1" (22.6 x 15.4 cm).

Dedolight DP400U Dedo 400 Universal Receptacle

Dedolight DP400U (DL-DP400U, DL/DP400U, DL_DP400U, dp400u) Dedo 400 Universal Receptacle This Dedolight Universal Receptacle allows the use of several accessories on the 400 Series Projection System. It accepts loose shutter leaves (DP400LFS), an 18 leaf Iris (DP400IR), and gobo holders for glass or steel gobos (DP400GGH & DP400GH).

Dedolight DTCF Tungsten Conversion Filter, 76mm Round

Dedolight DTCF (DL-DTCF, DL/DTCF, DL_DTCF, dtcf) Tungsten Conversion Filter, 76mm Round This Tungsten Conversion Glass Filter from Dedolight is a dichroic, glass filter for converting the daylight (5000°K) output of a Dedolight 200 Series HMI fixture, to match the output of other tungsten-halogen (3200°K) fixtures in use on the set. Light loss is approximately one stop.

Dedolight DP400GH A-Glass Gobo Holder 400 Series, DLED9/DLED10

Dedolight DP400GH (DL-DP400GH, DL/DP400GH, DL_DP400GH, dp400gh) A-Glass Gobo Holder 400 Series, DLED9/DLED10 Holds a single steel gobo. This is part of the modular DP400 System for projecting a very controlled beam of light.

Dedolight DP400GGH A-Glass Gobo Holder 400 Series, DLED9/DLED10

Dedolight DP400GGH (DL-DP400GGH, DL/DP400GGH, DL_DP400GGH, dp400ggh) A-Glass Gobo Holder 400 Series, DLED9/DLED10 Holds a single glass gobo. This is part of the modular DP400 System for projecting a very controlled beam of light.

Dedolight DSCM Soft Mono Bag

Dedolight DSCM (DL-DSCM, DL/DSCM, DL_DSCM, dscm) Soft Mono Bag The Dedolight DSCM Soft Case is made to carry a Dedolight single Classic light head with power supply and Imager. It will protect the equipment even when shipped as checked baggage.

Dedolight DLOBML-SBX12 5" Softbox for Ledzilla DLOBML LED Light

Dedolight DLOBML-SBX12 (DLOBML/SBX12, DLOBML_SBX12, dlobml-sbx12) 5" Softbox for Ledzilla DLOBML LED Light The Dedolight 5" Softbox for Ledzilla DLOBML LED Light is a 5 x 5" (12.7 x 12.7 cm) mini light bank which is ideal for fill light or to soften the Ledzilla's light output. A built-in filter slot allows use of a tungsten conversion filter or other light balancing or color effects filters.

Dedolight DSC150S Soft Case - Baby

Dedolight DSC150S (DL-DSC150S, DL/DSC150S, DL_DSC150S, dsc150s) Soft Case - Baby The Dedolight DSC150S Soft Case is made to carry a Dedolight SBABE-S or SBABE-B DLH1X150 soft light kit. It is carried by a handle or an included shoulder strap. Ballistic nylon case made to carry a lighting kit.

Dedolight DSTM Mini Stand

Dedolight DSTM (DL-DSTM, DL/DSTM, DL_DSTM, dstm) Mini Stand Ideally suited for travel applications and working on location, the black 48.5" DSTM Mini Light Stand from Dedolight is a compact aluminum stand measuring 15.75" when collapsed.

Dedolight DPBA-7HON Honeycomb Parallel Beam attachment for DPBA-L6

Dedolight DPBA-7HON (DPBA/7HON, DPBA_7HON, dpba-7hon) Honeycomb Parallel Beam attachment for DPBA-L6 This Dedolight Honeycomb is for the DPBA attachment, which is a parallel beam attachment for Series 200 and DLED4 light heads.

Dedolight DLGRIDS Silver Dome Foldable Soft Grid Small 40 Degree

Dedolight DLGRIDS (DL-DLGRIDS, DL/DLGRIDS, DL_DLGRIDS, dlgrids) Silver Dome Foldable Soft Grid Small 40 Degree This Dedolight Fabric Grid limits the light spread of the DSBSS 16 x 22" softbox to 40°. It alters the shape and intensity of the light output from the softbox and results in a narrower spread of light.

Dedolight DPIRS Iris for DP1S Imagers

Dedolight DPIRS (DL-DPIRS, DL/DPIRS, DL_DPIRS, dpirs) Iris for DP1S Imagers The Dedolight Iris for DP1 Projection Attachment is an 18-leaf metal accessory that allows the attachment to cast precise, circular wide-to-tight optical spot light. Size of the spot can be adjusted continuously.

Dedolight DSC1000S Soft Case - Senior

Dedolight DSC1000S (DL-DSC1000S, DL/DSC1000S DL_DSC1000S, dsc1000s) Soft Case - Senior The Dedolight DSC1000S Soft Case is made to carry a Dedolight DLH1x300S or DLH1000S light kit. It is carried by a handle or an included shoulder strap.

Dedolight DPIR 18 Leaf Iris for Projection Attachment

Dedolight DPIR (DL-DPIR, DL/DPIR, DL_DPIR, dpir) 18 Leaf Iris for Projection Attachment A full metal iris allowing the creation of almost perfectly round images in varying sizes. The standard Dedolight iris features a continuous movement of 18 leaves.

Dedolight DPBA-14HON Honeycomb for DPBA-14 Parallel Beam attachment

Dedolight DPBA-14HON (DPBA/14HON, DPBA_14HON, dpba-14hon) Honeycomb for DPBA-14 Parallel Beam attachment Dedolight Honeycomb for DPBA-14 Parallel Beam attachment for Series 400/402 and DLED9/DLED10 Lights

Dedolight DSBSS Dedoflex Silver Dome, Small

Dedolight DSBSS (DL-DSBSS, DL/DSBSS, DL_DSBSS, dsbss) Dedoflex Silver Dome, Small The Dedolight Dedoflex Small Softbox with silver interior is designed for use with all Dedolight softlight fixtures, except the PARSOFT. With fabric intended for the heat of a continuous light, the small softbox is ideal for work in small spaces where softening of the light is desired. The 16 x 22" size is portable and lightweight, and is suited for a headshot of 1 person, or for a product shot of 1 or 2 smaller-than-a-breadbox items. The front face of the Dedoflex can be removed for easy access to the light and the interior baffle from the front.

Dedolight DLOBML-LT20 Soft Tube for LEDzilla On Camera LED Light

Dedolight DLOBML-LT20 (DLOBML/LT20, DLOBML_LT20, dlobml-lt20) Soft Tube for LEDzilla On Camera LED Light The Dedolight 8" Soft Tube Light Shaper is another in the expanding line of accessories and light shaping tools for the LEDzilla DLOBML on camera LED light. This one is a 8" tube that turns the light's output into something akin to a soft fluorescent glow similar to single tube fixtures from Kino Flo. Ideal for car interiors or any application which places a light source in very close proximity, the Soft Tube Light Shaper is equipped with folding plastic barndoors for greater control of the LEDzilla's output.

Dedolight DSCST Soft Bag for 3x DST400 and Accessories

Dedolight DSCST (DL-DSCST, DL/DSCST, DL_DSCST, dscst) Soft Bag for 3x DST400 and Accessories The Dedolight DSCST Stand Bag is made to carry three Dedolight DST-400 light stands. Two straps wrap around the case to seal it closed. Carried by dual handles with an overlapping grip. Soft case made to carry light stands from a lighting kit Two straps wrap around the case to seal it closed Dual handles with overlapping grips  

Dedolight DT2-BAT DC electronics for DLED2Y-D/-T and DLED2YHSM-D/-T light heads

Dedolight DT2-BAT (DT2/BAT, DT2_BAT, dt2-bat) DC electronics for DLED2Y-D/-T and DLED2YHSM-D/-T light heads This Dedolight Monochrome DC Ballast for DLED2.1Y-D/DLED2.1YHSM-D Daylight Lamp Heads dims the output of these daylight heads with no color change. Input is 6-18 VDC.

Dedolight DT3-BAT DC electronics for DLED3-D/-T TURBO LED light heads

Dedolight DT3-BAT (dt3-bat, DT3/BAT, DT3_BAT) DC electronics for DLED3-D/-T TURBO LED light heads Power up your DLED3 daylight or tungsten LED light while on location with this DT3-BAT DC Ballast which sports a D-Tap connection for working from a battery or other portable power source. This ballast is dimmable for control over your fixture. Additionally, it accepts a wide range of voltages from 11-36 VDC.

Dedolight DLGRIDM Silver Dome Foldable Soft Grid Medium 40 Degree

Dedolight DLGRIDM (DL-DLGRIDM, DL/DLGRIDM, DL_DLGRIDM, dlgridm) Silver Dome Foldable Soft Grid Medium 40 Degree This Dedolight Collapsible Fabric Grid limits the light spread of a medium 24 x 32" softbox to 40°. Grids are essential accessories for any lighting system. A grid alters the shape and intensity of the light output from your softbox when it is mounted on a light head. Consider a grid as a painter would a brush or a sculptor would a knife or chisel. Fabric grids are hand-stitched and collapse easily for storage or transport. Use of a fabric grid will result in a narrower spread of light. The spread of light will be determined by the density of the honeycomb mesh and the distance of the subject from the light.

Dedolight DLHPA7-EXT Extension Arm for PanAura 7' Octodome

Dedolight DLHPA7-EXT (DLHPA7/EXT, DLHPA7_EXT, dlhpa7-ext) Extension Arm for PanAura 7' Octodome The Extension Arm for PanAura 7' Octodome from Dedolight is a metal triple-jointed accessory that allows a stand-mounted 7ft PanAura to be tilted down at an approximately 45-degree angle.

Dedolight DPBA-7 Parallel beam attachment for DLH200DT and DLH4

Dedolight DPBA-7 (DPBA/7, DPBA_7, dpba-7) Parallel beam attachment for DLH200DT and DLH4 This Parallel Beam Attachment from Dedolight is designed for the Series 200 and DLED4 light heads and will narrow the beam angle to <4° in the flood position.

Dedolight DLPA3G 40° Grid for 3' PanAura Octodome

Dedolight DLPA3G (DL-DLPA3G, DL/DLPA3G, DL_DLPA3G, dlpa3g) 40° Grid for 3' PanAura Octodome The 40° Grid for 3' PanAura Octodome from Dedolight limits the PanAura's soft, wide beam spread to 40° to control spill light and concentrate the output on the subject without affecting the background or other elements of the set. The grid folds flat for storage when not in use.

Dedolight DLRM-HONS Honeycomb Grid for Small Ledrama LED Panel

Dedolight DLRM-HONS (DLRM/HONS, DLRM_HONS, dlrm-hons) Honeycomb Grid for Small Ledrama LED Panel Honeycomb Grid adds directionality to the light output and helps to control light spill by narrowing the beam angle. This noticeable concentrates the output and produces a harder quality of light. The grid requires the separate set of four mounting brackets for attachment to the LED panel.

Dedolight DST1200S Stand Aluminium (Black, 10.3')

Dedolight DST1200S (DST-1200S, DST/1200S, DST_1200S, dst1200s) Stand Aluminium (Black, 10.3') Dedolight 10.3ft-tall, 3-section aluminum stand featuring a 1.5 Inch receptacle and a removable 5/8 Inch stud. The stand collapses to a height of 48 Inch and weighs 6.7lb.

Dedolight DST1200 Stand Steel (10.7', Black)

Dedolight DST1200 (DST-1200, DST/1200, DST_1200) Stand Steel (10.7', Black) The black DST1200 Light Stand from Dedolight is a 10.7'-tall chrome-plated 3-section steel stand featuring a 1.5" receptacle and a removable 5/8" stud. The stand collapses to a height of 48" and weighs 16lb.

Dedolight DT3-BI-BAT Separate DC electronics for TURBO LED light heads

Dedolight DT3-BI-BAT (DT3/BI/BAT, DT3_BI_BAT, dt3-bi-bat) Separate DC electronics for TURBO LED light heads Power up your DLED3 bi-color LED light while on location with this DT3-BI-BAT DC Ballast which sports a D-Tap connection for working from a battery or other portable power source. This ballast is dimmable for control over your fixture and offers color tuning, along with a digital display for color temperature. Additionally, it accepts a wide range of voltages from 11-36 VDC.

Dedolight DLRM-HONM Honeycomb Medium for Ledrama

Dedolight DLRM-HONM (DLRM_HONM, DLRM/HONM, dlrm-honm) Honeycomb Medium for Ledrama Dedicated to the Dedolight medium Ledrama LED panel, this Honeycomb Grid adds directionality to the light output and helps to control light spill by narrowing the beam angle. This noticeable concentrates the output and produces a harder quality of light. The grid requires the separate set of four mounting brackets for attachment to the LED panel.

DLPA5G Grid 40 Degree, fits dedolight PanAura/Octodome 5

Dedolight DLPA5G (DL_PA5G, DL-PA5G, DL/PA5G, dlpa5g) Grid 40 Degree, fits dedolight PanAura/Octodome 5 The 40° Grid for 5' PanAura Octodome from Dedolight limits the PanAura's soft, wide beam spread to 40° to control spill light and concentrate the output on the subject without affecting the background or other elements of the set. The grid folds flat for storage when not in use.

Dedolight DT7-BAT-AB DC electronics for DLED7 Turbo Daylight or Tungsten light heads

Dedolight DT7-BAT-AB DC (DT7/BAT/AB, DT7_BAT_AB, dt7-bat-ab) electronics for DLED7 Turbo Daylight or Tungsten light heads Power up a daylight or tungsten DLED7 Turbo Series LED light from a battery with this DT7-BAT-AB DC Ballast from Dedolight, which features a D-Tap input connector and a voltage of 11-36 VDC.

Dedolight DT2-BI-BAT-DMX DC Ballast for DLED 2

Dedolight DT2-BI-BAT-DMX (DT2/BI/BAT/DMX, DT2_BI_BAT_DMX, DT2-BI/BAT_DMX, dt2-bi-bat-dmx) DC Ballast for DLED 2 Run you DLED2 Bi-Color LED light from a 12 or 24 VDC battery with this DT2-BI-BAT-DMX DC Ballast from Dedolight. It provides full dimming and color tuning controls for the fixture and offers DMX for remote control.

Dedolight DLPA7G 40 Degree Grid for Dedoflex Panaura 7 Octodome (210cm)

Dedolight DLPA7G (DL-PA7G, DL/PA7G, DL_PA7G, dlpa7g) 40 Degree Grid for Dedoflex Panaura 7 Octodome (210cm) The 40° Grid for 7' PanAura Octodome from Dedolight limits the PanAura's soft, wide beam spread to 40° to control spill light and concentrate the output on the subject without affecting the background or other elements of the set. The grid folds flat for storage when not in use.

Dedolight DSC1 Soft Case Small for DLED10

Dedolight DSC1 (DS-C1, DS/C1, DS_C1, dsc1) Soft Case Small for DLED10 The Dedolight DSC1 Soft Case is made to carry a small Dedolight lighting kit. It will protect the equipment, even when shipped as checked baggage. The case is carried by top and side carrying handles Dual carrying handles add convenience.

Dedolight DT7 AC Ballast

Dedolight DT7 (DT-7, DT/7, DT_7, dt7) AC Ballast Power up a daylight or tungsten DLED7 Turbo Series LED light with this DT7 AC Ballast from Dedolight, which features a universal voltage of 90-264 VAC. This ballast provides support for dimming for advanced control over your light.

Dedolight DT4-BI-BAT DC electronics for DLED4-BI to use with 12V or 24V batteries

Dedolight DT4-BI-BAT (DT4/BI/BAT, DT4_BI_BAT, dt4-bi-bat) DC electronics for DLED4-BI to use with 12V or 24V batteries Dimmable ballast with a D-Tap connector that also provides continuous variable color temperature from 3,000 to 6,000K. Input is 10.2-18.0 VDC.(Approx. DDCC Cable or DLPS12-60 Power Supply Required)

Dedolight DT4-BI Power Supply (90-260 VAC)

Dedolight DT4-BI (DT4/BI, DT4_BI, dt4-bi) Power Supply (90-260 VAC) This Dedolight DT4-BI Power Supply (90-260 VAC) is a small, lightweight power source for the DLED4 bi-color balanced head. The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100 - 20%. The DT4-BI comes with an 8.2' mains cable. Allows worldwide use from 100 to 260 VAC 50/60 Hz cycle plus continuous dimming For Dedolight DLED4 bi-color head  

DSC2 Soft Case for Dedolight Large Lighting Kits

Dedolight DSC2 (DSC-2, DSC/2, DSC_2, dsc2) Soft Case for Dedolight Large Lighting Kits The Dedolight DSC2 Soft Case is made to carry a large Dedolight lighting kit. It will protect the equipment even when shipped as checked baggage. The case is carried by top and side carrying handles. Dual carrying handles add convenience.

Dedolight DT4-DMX Power Supply (90-260 VAC)

Dedolight DT4-DMX (DT4/DMX, DT4_DMX, dt4-dmx) Power Supply (90-260 VAC) This Dedolight DT4-DMX Power Supply (90-260 VAC) is a small, lightweight power source for the DLED4 tungsten and daylight balanced heads. The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100 - 20%. The DT4-DMX comes with an 8.2' mains cable. Allows worldwide use from 100 to 260 VAC 50/60 Hz cycle plus continuous dimming For Dedolight DLED4 tungsten and daylight heads  

Dedolight DLPA3 PanAura Octodome (3')

Dedolight DLPA3 (DL-PA3, DL/PA3, DL_PA3, dlpa3) PanAura Octodome (3') Dedolight PanAura Octodome 3ft features a very large diffusion surface area that produces a flattering wrap-around, soft light. The PanAura is extremely flat, making it ideal for work in confined space.

Dedolight DT7-BI Power supply for DLED7-BI TURBO LED light heads

Dedolight DT7-BI (DT7/BI, DT7_BI, dt7-bi) Power supply for DLED7-BI TURBO LED light heads Power up a bi-color DLED7 Turbo Series LED light with this DT7-BI AC Ballast from Dedolight, which features a universal voltage of 90-264 VAC. This ballast provides support for dimming and color tuning for advanced control over your light. This model also features a digital display for viewing the color temperature as it is adjusted.

Dedolight DPBA-14 Parallel Beam Attachment For DLED10-BI

Dedolight DPBA-14 (DPBA/14, DPBA_14, dpba-14) Parallel Beam Attachment For DLED10-BI DPBA-14 is constructed with non-spherical optics to match the double non-spherical optics of our DLH400DT light. This light, already in its original state, offers an incredible range from flood angle to very tight spot, nearly 4%. The amazing fact is that by adding the DPBA-14, the non-spherical parallel beam adapter, you put the light head in a position of full flood or near full flood, and the light output is two times or even more in comparison to the original light output in its spot position. This, making it a very useful, very powerful, very clean beam. Stray light can be diminished by a honeycomb front attachment for the parallel beam attachment. These optical attachments can also be used on some (not all) of our new LED light fixtures. They will definitely also work on our halogen light fixture DLH650.

Dedolight DSCXLW Soft Bag X-Large with Dividers and Wheels

Dedolight DSCXLW (DSC-XLW, DSC/XLW, DSC_XLW, dscxlw) Soft Bag X-Large with Dividers and Wheels The Dedolight DSCXLW Wheeled Soft Case is made to carry a Dedolight S5B or S5M Interviewer lighting kits. It will protect the equipment even when shipped as checked baggage. The case is carried by 2 side carrying handles and wheels. Compatible with: Dedolight S5B or S5M Interviewer lighting kits

Dedolight DLPA5 PanAura/Octodome 5, fits

Dedolight DLPA5 (DL-PA5, DL/PA5, DL_PA5, dlpa5) PanAura/Octodome 5, fits Dedolight PanAura Octodome 5ft features a very large diffusion surface area that produces a flattering wrap-around, soft light.

Dedolight DSC2W Soft Bag Medium with Wheels - 72x27x29cm

Dedolight DSC2W (DSC/2W, DSC-2W, DSC_2W, dsc2w) Soft Bag Medium with Wheels - 72x27x29cm Dedolight Soft Cases are extremely robust and offer excellent protection for the equipment, even when used as checked baggage during air travel. Especially useful for mobile teams.  Dividers inside the case are useful and are adjustable for individual requirements.

Dedolight DT7-BI-DMX AC Dimmable Ballast

Dedolight DT7-BI-DMX (DT7/BI/DMX, DT7_BI_DMX, DT7-BI/DMX, dt7-bi-dmx) AC Dimmable Ballast Power up a bi-color DLED7 Turbo Series LED light and remotely control it with this DT7-BI-DMX AC Ballast from Dedolight, which features a universal voltage of 90-264 VAC as well as a 5-pin XLR input and output for DMX support. This ballast provides support for dimming and color tuning for control over your light. This model also features a digital display for viewing the color temperature as it is adjusted.

Dedolight DP1200CON Standard Condenser Module for Series 1200 Light Heads

Dedolight DP1200CON (DP-1200-CON, DP/1200/CON, DP_1200_CON, dp1200con) Standard Condenser Module for Series 1200 Light Heads Use a DP400 Imager/Projection Attachment with your Series 1200 light heads, such as the DLH1200 and DLED12, by using this Standard Condenser Module from Dedolight. This model is optimized for 150mm, 185mm, and 230mm focal lengths, though it can also be used with a 100mm lens.

Dedolight DP3.1 Slide and Steel Gobo Projection Attachment with 85mm Lens

Dedolight DP3.1 (DP-3.1, DP/3.1, DP_3.1, dp3.1)Slide and Steel Gobo Projection Attachment with 85mm Lens Made for use with DLH4, DLHM4-300, and DLH200DT lights, the Dedolight Slide and Steel Gobo Projection Attachment with 85mm Lens has a 24 VDC power supply that runs a multi-speed cooling fan which allows prolonged use of slides or M-size gobos without damage. The attachment has advanced features such as Image Plane Adjustment that insures edge-to-edge sharpness even for off-axis projections. Although the Projection Attachment ships with an 85mm lens, other lenses are available to suit your distance and image size requirements.

Dedolight DLPA7 PanAura Octodome (7')

Dedolight DLPA7 (DLPA-7, DLPA/7, DLPA_7, dlpa7) PanAura Octodome (7') The 7' Dedolight PanAura Octodome features a very large diffusion surface area that produces a flattering wrap-around, soft light. The PanAura is extremely flat, making it ideal for work in confined spaces.

Dedolight DP400-70 Imager projection 70mm f1.5 Lens

Dedolight DP400-70 (DP400/70, DP400_70, dp400-70) Imager projection 70mm f1.5 Lens The DP400 projection attachment is a modular system enabling quick change and versatility. Two basic configurations are available, and due to the sophisticated modular system, additional components may be easily added according to the users application. Projection lens 70 mm, f/1.5, high transmission, seven element projection lens. High resolution with low distortion.

Dedolight DP400-230 230mm F-2 Telephoto Projection Lens with Barrel

Dedolight DP400-230 (DP400/230, DP400_230, dp400-230) 230mm F-2 Telephoto Projection Lens with Barrel Metal barrel, bright F2 aperture, it has the longest focal length of the Dedolight projection lenses. This is part of the modular DP400 System for projecting a very controlled beam of light.

Dedolight DCHD3x652 Transport Hard Case for DLH652T & DLH652T-DMX Light Heads

Dedolight DCHD3x652 (DCHD-3x652, DCHD/3x652, DCHD_3x652, dchd3x652) Transport Hard Case for DLH652T & DLH652T-DMX Light Heads The Dedolight Heavy Duty Transport Case is specially designed for DLH652T & DLH652T-DMX Light Heads.

Dedolight DLEDRAMA-BI Bi-Color Soft LED Panel

Dedolight DLEDRAMA-BI (DLEDRAMA/BI, DLEDRAMA_BI, dledrama-bi) Bi-Color Soft LED Panel The DLEDRAMA-BI Bi-Color Soft LED Panel from Dedolight offers a maximum light intensity of up to 23,600 lux (Intensity Daylight) and 17,000 lux (Intensity Tungsten) at a distance of up to 3.3’. It features four 608 SMD (Surface Mounted Device) LEDs.

Dedolight DSBSXS Dedoflex Silver Dome, X-Small

Dedolight DSBSXS (DL-DSBSXS, DL/DSBSXS, DL_DSBSXS, dsbsxs) Dedoflex Silver Dome, X-Small The Dedlight Dedoflex Mini Softbox measures 12 x 12" (30 x 30cm) and has a silver interior. It provides softness, with a little punch, when mounted to the front of a small Dedolight fixture. Softbox for: DLH1x150S DLED4 – LED series DLH4 – Classic 150w series DLHM4 – Classic 150w studio versions DLH200 – HMI Daylight version

Dedolight KDP400KU Imager projection attachment universal Kit

Dedolight KDP400KU (KDP-400-KU, KDP/400/KU, KDP_400_KU, kdp400ku) Imager projection attachment universal Kit The DP400 projection attachment is a modular system enabling quick change and versatility when used with the Dedolight HMI 400D, Tungsten 436 and 650 light fixtures. This is a basic system, with a 185 f 3.5 projector lens. When attached to a Dedo 400D, this lens will throw a light beam of 117 footcandles 78" in diameter, from 15' away. When attached to a Dedo 436, this lens will throw a light beam of 67 footcandles 78" in diameter, from 15' away. When attached to a Dedo 650, this lens will throw a light beam of 84 footcandles 78" in diameter, from 15' away.

Dedolight KDP400KFS Projection Attachment Kit

Dedolight KDP400KFS (KDP_400KFS, KDP-400KFS, KDP/400KFS, kdp400kfs) Projection Attachment Kit The DP400 projection attachment is a modular system, enabling poinpoint control over the light from a Dedo 400 Series, or other similarly sized spotlight. The Projection Attachment accepts different focal length lenses, for different "throws" of light. This kit includes a 185mm lens, which is suitable for most applications, and a framing shutter module for precise framing of the light, and a hard case for transport and storage. The optional DP400U Universal Receptacle allows the use of a gobo holder for Size A (100mm) steel or glass gobos, or film transparencies, a loose shutter set, or an 18 leaf Iris.