Dedolight DPBA-L7 Parallel Beam intensifier LED monocolor, 7cm diameter Fits DLED4-D, DLED4-T, DLED7-D, DLED7-T

Dedolight DPBA-L7 (DPBA_L7, DPBAL7, DPBA/L7, DPBA L7) Parallel Beam intensifier LED monocolor, 7cm diameter Fits DLED4-D, DLED4-T, DLED7-D, DLED7-T  Dedolight - Parallel Beam attachment for DLED4-D, DLED4-T, DLED7-D, DLED7-T (Approx. mono color)      

Dedolight DPBA-L1821 Parallel Beam intensifier LED monocolor, 21cm diameter. Fits DLED12-D, DLED30-D. used with DPBA-21HON honeycomb

Dedolight DPBA-L1821 (DPBA_L1821, DPBAL1821, DPBA/L1821, DPBA L1821) Parallel Beam intensifier LED monocolor, 21cm diameter. Fits DLED12-D, DLED30-D. used with DPBA-21HON honeycomb This DPBA-L1819 Parallel Beam Intensifier increases light output up to an astonishing 351% (DLED30). Simply used by sliding in at the light's accessory slot and adjusting to the flood position; the new beam generated by this lens can be from 6° - 8° spread angles, depending on light model used. Parallel Beam Intensifiers, unique only to dedolight focusing lights, make using multiple Lightstream reflectors from one light source possible, as well as establishes a controlled virtual light source from the reflecting surface. "Lightstreaming" with Parallel Beam Intensifiers completely brings the reflectors to life in a systematic way with undeniably beautiful results. This tool provides a powerful new function your dedolight which nothing else can do on the market.       

Dedolight DMTSB420-SR Tripple stud boom with sliding receptacle. Length 42 cm.

Dedolight DMTSB420-SR (DMTSB420SR, DMTSB420_SR, DMTSB420/SR, DMTSB420 SR) Tripple stud boom with sliding receptacle. Length 42 cm. The Triple Stud Boom with Sliding Receptacle from Dedolight is 42cm in length.      

Dedolight Telephoto Projection Lens

Dedolight Telephoto Projection Lens(DPL185M) Metal barrel, f3.5. Has the longest focal length of the Dedolight projection lenses.

Dedolight Soft Case Kit with Four Reflector Surfaces

Dedolight Soft Case Kit with Four Reflector Surfaces(SEFL-4) Reflected light for creative elements and backgrounds. The multi-mirror reflectors can be bent and shaped for a multitude of light effects for projection, not only on the background, but also on persons. Neutral effects can simulate light spots and speckles as they can be seen when sunlight or moonlight falls through leaf structures of trees or bushes. Laminated color effect filters look super simple, but offer an amazing variety of effects. The light heads can be used in their original version or in conjunction with the parallel beam attachment for expanded power use and additional variation of effects. When using the parallel beam attachments, the useful light is doubled. Not only in the mini set, also in the big studio such effects can be used. Easy and quick setup for the professional in television, video and in photography.

Dedolight Large EFLECT Mirror Kit #1

Dedolight Large EFLECT Mirror Kit #1(SEFL-1) Reflected light for creative elements and backgrounds. The multi-mirror reflectors can be bent and shaped for a multitude of light effects for projection, not only on the background, but also on persons. Neutral effects can simulate light spots and speckles as they can be seen when sunlight or moonlight falls through leaf structures of trees or bushes. Laminated color effect filters look super simple, but offer an amazing variety of effects. The light heads can be used in their original version or in conjunction with the parallel beam attachment for expanded power use and additional variation of effects. When using the parallel beam attachments, the useful light is doubled. Not only in the mini set, also in the big studio such effects can be used. Easy and quick setup for the professional in television, video and in photography.

Dedolight Parallel Beam Intensifier for Light Heads

Dedolight Parallel Beam Intensifier for Light Heads(DPBA-714) This DPBA-714 Parallel Beam Intensifier increases light output up to 313% (DLH4). Simply used by sliding in at the light's accessory slot and adjusting to the flood position; the new beam generated by this lens can be from 4° - 8° spread angles, depending on light model used. Fits DLED7-BI, DLED7-D, DLED7-T, DLED4-BI, DLED4-D, DLED4-T or DLH4.

Dedolight Lightstream Reflector Kit

Dedolight Lightstream Reflector Kit(SLR7R-4) The Dedolight SLR7R-4 Lightstream Reflector Kit is the perfect lighting solution for photographers and videographers. This soft bag kit includes 4 reflectors in the compact size of 7x10 cm, making it easy to transport and use on location. The kit consists of reflectors #1, #2, #3, and #4, as well as extra accessories for versatile lighting options. The high efficiency of the reflectors in this system is due to their reflective values, with an impressive 95-98% of light being effectively reflected. When used with Parallel Beam adaptors, the quality of light and shadows becomes uniquely realistic, adding depth and dimension to your shots. The Dedolight SLR7R-4 Lightstream Reflector Kit features four different reflector types, each with a different surface for specific lighting effects. Reflector #1 is the closest to a very hard reflector, redirecting light without changing the beam size or character. It has a surface structure that provides reflection with a minimal exit angle of about 4°. Reflector #2 has a wider exit angle of 12°, making it more suitable for use with secondary reflectors with larger surfaces. Although it shows slightly less light intensity at the object, the total amount of reflected light remains consistent at 95-98%. For a gentler reflection, Reflector #3 covers an angle of 50°, while Reflector #4 has the widest angle of 95° and produces the most gentle reflection. This results in lower light levels reaching the object, making it ideal for close-up shots. In fact, when compared to commonly used styrofoam, Reflector #4 has comparable light intensity values reaching the object. The use of reflectors #3 and #4, or styrofoam, minimizes the effect of the square law when talent is moving. This is because the reflector surface itself becomes a light source, changing the influence of the square law and ensuring consistent exposure values. With the Dedolight SLR7R-4 Lightstream Reflector Kit, you can achieve professional lighting results with ease.

Matthews Cutter ,24" X 72''

Matthews Cutter ,24" X 72''(169067) Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Gobo Plate Media Mount (Vesa)

Matthews Gobo Plate Media Mount (Vesa)(30027) Matthews Studio Equipment, Inc. expands the Gobo Plate™ line with an affordable on-set grip tool that’s easy for anyone to use. Gobo Plate™ Media Mount is designed to rapidly and safely mount monitors onto C-Stands using standard 2.5” Grip heads. The simplicity and versatility of the Gobo Plate™ Media Mount system offers speed and adaptability amongst the ever-changing nature of set work, allowing montiors to be mounted wherever necessary and easily adjusted whenever necessary.

TILTA UH-T04 Universal Pro Hand Grip System

TILTA UH-T04 (UH/T04, UH_T04, UHT04, UH T04) Universal Pro Hand Grip System This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods. The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.  

Canon BG-R10 Battery Grip

Canon 4365C001 (BG R10, BG/R10, BG_R10, BGR10) BG-R10 Battery Grip. Add a BG-R10 Battery Grip to your EOS R5 or EOS R6 and you’ll be able to shoot for longer, without stopping to switch or charge batteries. Two of LP-E6NH, LP-E6N or LP-E6 batteries can be used together to extend your shooting time. LP-E6NH and LP-E6N batteries can be charged in the grip by connecting the camera to a PD-compatible USB power source, like the Canon PD-E1. The grip also has a duplicate set of camera controls – including an AF point selection joystick – that is positioned to replicate the layout of the camera’s own buttons and dials. They fall instinctively under the right fingers and thumbs when the camera is held vertically. The BG-R10 is built to the same exacting standards as the EOS R5 and EOS R6 cameras, with the same level of resistance to dust and moisture. Benefits Shoot for longer with your EOS R5 or EOS R6 by using two of LP-E6NH, LP-E6N or LP-E6 batteries at the same time The BG-R10 makes it more comfortable to hold your camera vertically, with an ergonomically sculptured grip and a duplicate set of controls that are instinctive to find with the camera at your eye Power your EOS R5 or EOS R6 with mains electricity by connecting the BG-R10 to the DR-E6 DC Coupler and AC-E6N AC Adapter Charge LP-E6NH or LP-E6N batteries without removing them from the grip. Just connect the camera to a PD-compatible USB power source Duplicate controls include an AF point selection joystick that makes it easy to move the active focus point around the frame Shoot with confidence when conditions turn bad – the BG-R10 is built to the same exacting standards as the EOS R5 and EOS R6 cameras, with the same level of resistance to dust and moisture  

Manfrotto MAGIC ARM KIT

MAGIC ARM KIT, 143 (MAN-143, MAN_143, MAN/143, MAN 143) Functional and practical, the Magic Arm Kit is an essential part of any photographer’s or content creator’s kit. Made to the highest quality Italian standards, the tough and hard wearing aluminium material makes this all in one solution a highly dependable accessory.Includes (1x) Magic Arm (143N), (1x) Camera/Umbrella Bracket (143BKT), (1x) Super Clamp (035), (1x) Super Clamp.A highlight of this product is its smart centre lever, especially made to lock for all three main movements during your photography and video work. This fast and secure solution gives you assurance that there won't be any unwanted slips or problems when you need to focus on getting that perfect shot.The design of the Magic Arm balances strength with flexibility. Weighing a mere 1.7kg, the Magic Arm can securely hold weights up to 3kg while also extending to a maximum length of 53cm. With reliable features and uncompromised build quality, you can trust this kit to handle the most demanding of photography work.Designed to give you everything you need in one bag, it includes a camera bracket, a super clamp, and a handy backlight base. All in all, this gives you the complete magic photo arm set.Each end of this arm is equipped with a standard-size 16mm spigot which is Anti-Rotation Super Clamp 035 Compatible and features one 1/4” female thread attachment on one side and 3/8” female thread attachment on the other. In addition, the arm is compatible with a whole host of Manfrotto Lighting Accessories such as floor stands, Clamps, Camera Brackets and more. This gives you a fully compatible and functional magic photo arm you may take with you wherever you go. The perfect item of photography equipment to support LED lights, studio lighting and studio equipment, in fact just about anything in or out of the studio needed to be positioned flexibly and securely!

Matthews Magic Stand /W Runway Base

Matthews Magic Stand /W Runway Base(999042) This stand is truly magical! With the Runway Base added, the Magic Stand can be a regular rolling light stand. It can be a high rolling light stand, and it can also convert to a two section light boom with its own rolling stand. Its versatility is truly magical, whether a light needs to be placed at floor height, or behind as a hair light, or over a table for a product shot - this stand can do it all! Made with a standard 1-1/8" Junior Pin at the bottom, the Magic Stand riser could be added to the Combo Stand as a very unique stand extension or inverted to hang from a C-Clamp into the set. The top riser incorporates our Magic Finger - a stand that has been copied, but not yet duplicated!

Matthews Monitor Stand II

Matthews Monitor Stand II(249562) Featuring a black chrome finish, the Monitor Stand II from Matthews has a minimum working height of 29" and rises to a maximum height of 75". The stand will support gear weighing up to 70 lb and is easily moved thanks to its 3" casters. The Monitor Stand II also has an adjustable rocky mountain leg to level the stand on uneven terrain.

Manfrotto Triaut Camera Trpd Blk

TRIAUT CAMERA TRPD BLK, 058B (MAN-058B, MAN_058B, MAN 058B, MAN/058B) The versatile, practical and reliable studio tripod. you can't go wrong with the 058B Triaut Camera Tripod. This is a stand built for any situation and any terrain, for serious professionals. Giving you all the scope and control you need to create beautiful pictures regardless of the environment, this stand really is a must-have for any photographer. And it’s made to top quality standards in Italy, so you can be sure it'll stand the test of time.This dynamic studio tripod has plenty of noteworthy features, starting with it's clever automatic leg release system. This allows you to either release one leg to tweak your position, or all three at the same time, so you can work fast and smart. It also has a spirit level built in, for even greater control and speed, meaning you can simply adjust to the precise angle with a glance. And it has built-in telescopic struts, easily activated by a quick release plate. This addition enables you to quickly capture a whole variety of perspectives without any fuss or excess fiddling.Versatile and user-friendly, this stand is ideal for both indoor and outdoor shoots. This is partly helped by it's mid-level spreader and rubber feet with retractable spikes, meaning you can stay completely steady, even on rough terrain. It’s portable too, with it's very own, comfortable carrying strap included. That way, you can move from shoot to shoot without any inconvenience. Simply unstack, hook it over you shoulder, and you're good to go.

Matthews Mathews slider stand

Mathews slider stand(MD_249561, MD/249561, MD 249561, 249561) The Slider Stand comes standard with two rocky mountain legs for easy levelling on hills, mountainsides, rocky environments, stairs and most other uneven terrain. As a comparison, the Slider Stand minimum working height measures one foot (30cm) lower than the standard low boy combo, giving the camera operator a POV range from hip to eye level.

Matthews Kit Stand- Light/Heavy Duty Triple Riser (Black)

Matthews Kit Stand- Light/Heavy Duty Triple Riser (Black)(MD_B387490, MD/B387490, MD B387490, B387490) For a lightweight Kit stand this larger version provides a little extra support, height and stability compared to the average – built to Matthews high standards an excellent addition if you need a little extra! Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the use of heavier fixtures. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality

Matthews Kit Stand - Light/Heavy Double Riser -Black

Matthews Kit Stand - Light/Heavy Double Riser -Black(MD_B387487, MD/B387487, MD B387487, B387487) This lightweight Kit stand is an excellent medium to heavy sized stand with good support, height and stability – built to Matthews high standards! Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the use of heavier fixtures. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

Manfrotto D650 Junior Boom Arm with Counterweight

Manfrotto D650 (MAN-D650, MAN/D650, MAN_D650, MAND650, d650) Junior Boom Arm with Counterweight Boom arms allow you to position your lights to reach the most difficult positions. This junior boom arm can support a payload up to 40kg and extends up to 3m. It also includes a strong steel counterweight for smooth operation and stability.

Shape SH-FX9BR Camera Cage Baseplate with Handle for Sony FX9

Shape SH-FX9BR (SH/FX9BR, SH_FX9BR, SHFX9BR, SH FX9BR, sh-fx9br, FX9BR) Camera Cage Baseplate with Handle for Sony FX9 Designed for your FX9 camera, this SHAPE Camera Cage Baseplate with Handle provides you with a formfitting half cage with top plate, a 15mm rod system, baseplate with shoulder pad, and a left-side handle with SHAPE's easy-to-use push-button release system. This system helps protect your camera from the rigors of production while providing improved ergonomics for hand-holding, tripod use, and accessory mounting. The cage features an ARRI rosette on the side, which makes an ideal attachment point for the included left-side articulating handgrip. The handgrip features SHAPE's proprietary push-button release system that allows you to adjust the position of the handgrip with the press of your thumb. You can also mount the left-side handgrip to the included baseplate, which incorporates 15mm rod clamps, a V-lock plate for tripod mounting, and a gel shoulder pad.

Manfrotto B7043CS-1 Strato Safe Stand 3 Riser w/Braked Wheels

Manfrotto B7043CS-1 (MAN-B7043CS-1, MAN/B7043CS/1, MAN_B7043CS_1, MANB7043CS1, b7043cs-1) Strato Safe Stand 3 Riser w/Braked Wheels The Avenger B7043CS-1 Flat Jumper Strato Safe Stand 43 is built in chrome steel and gravity cast aluminum, comprising of 3 risers and 4 sections. This stand surpasses industry requirements for safe operation and is part of the Strato Safe family that can lift heavy loads up to 70kg/154lbs. Each section uses a uniquely designed gear box that uses a ratchet crank handle to safely raise each riser into place. The ratchet crank handle can conveniently be stored to the top casting of the stand and is always available when needed. Braked rubber wheels are sold with this stand and allow for easy moving in studio and other smooth and semi-smooth surfaces. This stand comes with a 087WBK wind brace kit for extra securing of the load when required. Other wheel options are available if required. (B9000P). Avenger works hard to develop and certify gear for different markets! The B7043CS-1 along with being TÜV rated is also CE certified and has a CE declaration. Don't settle for copies that try to emulate this TÜV and CE certified stand.

Manfrotto B150P-1 Strato Safe Stand 4 Riser

Manfrotto B150P-1 (B150P/1, B150P_1, B150P1, B150P 1, b150p-1) Strato Safe Stand 4 Riser The Avenger B150P-1 Strato Safe Crank Up Stand is a beast of a stand with exceptional performance and uses rubber filled wheels (B9000P) for better movement over different types of terrain. This stand has a humorous industry nickname and it is used commonly by grips and gaffers worldwide. It is built in Chrome Steel and Gravity Cast aluminium, comprising of 4 Risers and 5 sections. This stand surpasses industry requirements for safe operation and is part of the Strato Safe family that can lift heavy loads up to 220lbs./100kg. Each section uses a uniquely designed gear box that uses a ratchet crank handle to safely raise each riser into place. The ratchet crank handle can conveniently be stored to the top casting of the stand and is always available when needed. Hard Rubber braked wheels are sold with this stand and allow for easy moving in studio and across many different surfaces. This stand comes with a 087WBK wind brace kit for extra securing of the load when required. Avenger works hard to develop and certify gear for different markets! The B150P-1 along with being TÜV rated is also CE certified and has a CE declaration. Don't settle for copies that try to emulate this TÜV and CE certified stand.

Manfrotto A9000NB Wheel Set with Brakes (Black)

Manfrotto A9000NB (MAN-A9000NB, MAN/A9000NB, MAN_A9000NB, MANA9000NB, man_a9000nb) Wheel Set with Brakes (Black) This set of 3 braked wheels are Ø:100mm and are ideal for 20 x 20 and 25 x 25mm square legs to accessorise stands.

Manfrotto A9000N Wheel Set with Brakes (Silver)

Manfrotto A9000N (MAN-A9000N, MAN/A9000N, MAN_A9000N, MANA9000N, man_a9000n) Wheel Set with Brakes (Silver) This set of 3 braked wheels are Ø:100mm and are ideal for 20 x 20 and 25 x 25mm square legs to accessorise stands.

Manfrotto A5043 Roller Stand 43 with Low Base

Manfrotto A5043 (MAN-A5043, MAN/A5043, MAN_A5043, MANA5043, man_a5043) Roller Stand 43 with Low Base This Avenger roller stand with 4 sections and 3 risers features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and can reach a maximum height of 4.30m. It features wheels for easy transportation and a low base for extra stability.

Manfrotto A5033 Roller Stand 33 with Folding Base

Manfrotto A5033 (MAN-A5033, MAN/A5033, MAN_A5033, MANA5033, man_a5033) Roller Stand 33 with Folding Base This Avenger roller stand with 4 sections and 3 risers features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and it can reach a maximum height of 3.30m. It features wheels for easy transportation and its legs fold up for better storage.

Manfrotto A5029 Roller Stand 29 with Low Base

Manfrotto A5029 (MAN-A5029, MAN/A5029, MAN_A5029, MANA5029, man_a5029) Roller Stand 29 with Low Base This Avenger roller stand with 3 sections and 2 risers features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and can reach a maximum height of 2.90m. It features wheels for easy transportation and a low base for extra stability.

Manfrotto A4041B Boom Stand 41 Aluminium Black

Manfrotto A4041B (MAN-A4041B, MAN/A4041B, MAN_A4041B, MANA4041B, man_a4041b) Boom Stand 41 Aluminium Black The Avenger boom stand 41 is a black aluminium stand with 4 sections and 3 risers. The stand is supplied with a sandbag counterweight(empty) for maximum stability. It can support a maximum payload of 10kg and can reach a maximum height of 4.13m. It also features 1 levelling leg for easy use on uneven surfaces.

Manfrotto A4039CS Boom Stand 39 Steel

Manfrotto A4039CS (MAN-A4039CS, MAN/A4039CS, MAN_A4039CS, MANA4039CS, man_a4039cs) Boom Stand 39 Steel The Avenger boom stand 39 is a steel stand with 4 sections and 3 risers. The stand is supplied with a sandbag counterweight (empty) for maximum stability. It can support a maximum payload of 12kg and can reach a maximum height of 3.92m. It also features 1 levelling leg for easy use on uneven surfaces.

Manfrotto A3056CS Overhead Steel Stand 56 Steel with Wide Base

Manfrotto A3056CS (MAN-A3056CS, MAN/A3056CS, MAN_A3056CS, MANA3056CS, man_a3056cs) Overhead Steel Stand 56 Steel with Wide Base The overhead stands have been designed with a built-in grip head for supporting poles, tubes and overhead frames. This chrome steel stand has 4 sections and 3 risers. It features 1 levelling leg so you can even use the stand on rough terrain. It's also compatible with braked wheels A9000N. This stand can support a maximum payload of 40kg and can reach a maximum height of 5.57m.

Manfrotto A3042CS Overhead Stand 42 Steel

Manfrotto A3042CS (MAN-A3042CS, MAN/A3042CS, MAN_A3042CS, MANA3042CS, man_a3042cs) Overhead Stand 42 Steel These overhead stands have been designed with a built-in grip head to use supporting poles, tubes and overhead frames. This chrome steel stand has 4 sections and 3 risers. It can support a maximum payload of 40kg and can reach a maximum height of 4.23m.

Manfrotto A2033LKIT C-Stand Kit 33 With Sliding Leg

Manfrotto A2033LKIT (MAN-A2033LKIT, MAN/A2033LKIT, MAN_A2033LKIT, MANA2033LKIT, man_a2033lkit) C-Stand Kit 33 With Sliding Leg This kit includes a turtle base chrome plated steel stand (code A2033L) with 3 sections and 2 risers. It also includes D200grip head and D520 40'' (124cm) extension arm that provides extended grip point for scrim, flags and small lights. It features one sliding leg to keep the stand steady on uneven surfaces. This stand has a maximum payload of 10kg and maximum height of 3.28m.

Manfrotto A2025LCB C-Stand 25 With Sliding Leg

Manfrotto A2025LCB (MAN-A2025LCB, MAN/A2025LCB, MAN_A2025LCB, MANA2025LCB, man_a2025lcb) C-Stand 25 With Sliding Leg Turtle base chrome plated steel stand in black finish with 3 sections and 2 risers. Legs folds flat for easy storage. This stand has a maximum payload of 10kg and maximum height of 3.28m. It features one sliding leg for easy use on uneven surfaces. The stand is also available in chrome plated steel.

Manfrotto A2018FCB C-Stand 18 Black Finish Version

Manfrotto A2018FCB (MAN-A2018FCB, MAN/A2018FCB, MAN_A2018FCB, MANA2018FCB, man_a2018fcb) C-Stand 18 Black Finish Version Turtle base chrome plated steel stand in black with 3 sections and 2 risers. Legs fold flat for easy storage. This stand has a maximum payload of 8kg and maximum height of 1.75m. The stand is also available in chrome plated steel. Legs fold flat for easy storage.

Manfrotto A2016DCB C-Stand 16 with Detachable Base Black

Manfrotto A2016DCB (MAN-A2016DCB, MAN/A2016DCB, MAN_A2016DCB, MANA2016DCB, man_a2016dcb) C-Stand 16 with Detachable Base Black Turtle base chrome plated steel stand in black with 3 sections and 2 risers. The base is detachable allowing easy transport. This stand has a maximum payload of 10kg and maximum height of 1.55m. The stand is also available in chrome plated steel.

Manfrotto A1045B Combo Aluminium Stand 45 Black

Manfrotto A1045B (MAN-A1045B, MAN/A1045B, MAN_A1045B, MANA1045B, man_a1045b) Combo Aluminium Stand 45 Black Avenger Combo Stand 45 is a black aluminium stand with 4 sections and 3 risers. It's a heavy duty stand that can support a payload up to 30kg and can reach a maximum height of 4.50m. It is compatible with A900NB braked wheels which are sold separately. It features a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto A1035B Combo Aluminium Stand 35 Black

Manfrotto A1035B (MAN-A1035B, MAN/A1035B, MAN_A1035B, MANA1035B, man_a1035b) Combo Aluminium Stand 35 Black Avenger Combo Stand 35 is a black aluminium stand with 3 sections and 2 risers. It's a heavy duty stand that can support a payload up to 30kg and can reach a maximum height of 3.50m. It is compatible with A900NB braked wheels which are sold separately. It has a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto A1010CS Combo Stand 10 Steel

Manfrotto A1010CS (MAN-A1010CS, MAN/A1010CS, MAN_A1010CS, MANA1010CS, man_a1010cs) Combo Stand 10 Steel Avenger Combo Stand 10 is a chrome steel stand with 2 sections and 1 riser. It's a heavy duty stand that can support a payload up to 30kg and can reach a maximum height of 1m. It has a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto A0045B Baby Stand 45 Aluminium Black

Manfrotto A0045B (MAN-A0045B, MAN/A0045B, MAN_A0045B, MANA0045B, man_a0045b) Baby Stand 45 Aluminium Black This is a black aluminium stand with 4 sections and 3 risers. The stand can hold a maximum payload of 10kg and can reach a maximum height of 4.50m. The stand has 1 levelling leg so you can easily use it on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0040CS Baby Stand 40 Steel

Manfrotto A0040CS (MAN-A0040CS, MAN/A0040CS, MAN_A0040CS, MANA0040CS, man_a0040cs) Baby Stand 40 Steel This is a chrome plated steel stand with 4 sections and 3 risers. The stand can hold a maximum payload of 9kg and can reach a maximum height of 4m. The stand features 1 levelling leg for easy operation on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0040B Baby Stand 40 Aluminium Black

Manfrotto A0040B (MAN-A0040B, MAN/A0040B, MAN_A0040B, MANA0040B, man_a0040b) Baby Stand 40 Aluminium Black This is a black aluminium stand with 4 sections and 3 risers. The stand can hold a maximum payload of 9kg and can reach a maximum height of 4m. The stand has 1 levelling leg so you can easily use it on uneven surfaces. It also features a top attachment of 5/8'' (16mm).

Manfrotto A0030CS Steel Baby Stand 300cm

Manfrotto A0030CS (MAN-A0030CS, MAN/A0030CS, MAN_A0030CS, MANA0030CS, man_a0030cs) Steel Baby Stand 300cm This is a chrome plated steel stand with 4 sections and 3 risers. The stand can hold a maximum payload of 10kg and can reach a maximum height of 3m. The stand has 1 levelling leg for easy use on uneven surfaces. It features a 5/8'' (16mm) top attachment.

Manfrotto A0017 Avenger Baby Stand 17

Manfrotto A0017 (MAN-A0017, MAN/A0017, MAN_A0017, MANA0017, man_A0017) Avenger Baby Stand 17 This stand features steel legs and aluminium risers and is available in silver only. The stand has 3 sections and 2 risers, can support a maximum payload of 4kg and can reach a maximum height of 1.75m. It has 1 levelling leg so you can use it on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0010 Avenger Baby Stand 10

Manfrotto A0010 (MAN-A0010, MAN/A0010, MAN_A0010, MANA0010, man_a0010) Avenger Baby Stand 10 This stand features steel legs and aluminium risers and is available in silver only. The stand has 3 sections and 2 risers, can support a maximum payload of 15kg and can reach a maximum height of 1m. It has 1 levelling leg so you can use it on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto 432-3-7B Black Autopole 2 2.1-3.7m

Manfrotto 432-3-7B (432/3/7B, 432_3_7B, 43237B, 432-3.7B, 432-3,7B) Black Autopole 2 2.1-3.7m The hardworking autopole for big or small spaces. The Autopole 2 is ideal for creating backgrounds whatever space you have to work with. Because it extends from between 210cms and 370 cms, it can be adjusted to fit the area, whether that’s in the studio or on location. This ingenious and flexible system means you can create super-professional results every time, without any hassle. Aside from being nifty and functional, this autopole is made to last. It’s crafted from durable aluminium, and painted black for a stylish finish. This means that it’s strong enough to support what you need on the day, while being lightweight enough to pack away and carry to the next stop easily. Not only that, it has a smart cantilever system, enabling you to get everything into place with a few swift movements. To keep things extra secure, there’s an integrated safety lock, so when you're set up there’s no chance of slipping or wobbling. This helps the autopole to carry heavier loads with ease. Plus, rubber cups at each end give you a totally firm footing, regardless of the ground you're on, so you can be extra sure that you're completely stable.

Manfrotto 432-3-7 Autopole 2 2.1-3.7m

Manfrotto 432-3-7 (432/3/7, 432_3_7, 43237, 432-3.7, 432-3,7) Autopole 2 2.1-3.7m This 82.7-145.7" Manfrotto Deluxe Silver Single Autopole 2 was designed to serve the needs of image makers, decorators, and set designers. The brushed aluminum pole mounts between the floor and ceiling of a studio, or between any two flat, fixed surfaces and is secured with a large, spring-lock handle. A rubber foot at each end prevents abrasion damage. Extensions are available to accommodate higher ceilings or changes in the user's requirements. Accessories for the Autopole 2 include super clamps, hooks, grip arms, and background support systems. A spring-loaded tip combined with rubber suction cups on top and bottom provide greater security. Floor-to-ceiling or wall-to-wall, this Autopole provides strong vertical or horizontal support for lighting.

Manfrotto 420NSB Combi Boom Stand Black

Manfrotto 420NSB (420-NSB, 420/NSB, 420_NSB, 420 NSB, 420nsb) Combi Boom Stand Black Light up your studio shoots like never before. This Aluminium Light Stand is perfect for portrait and product photographers due to its highly manoeuvrable, lightweight design, which allows you to set it up and pack it away quickly. This boom stand is ideal for smaller studios, where photographers have more limited framing and shooting options. Its height ranges from 1.1 to 2.1 metres so you can use it for an extensive range of shoots. By not having to use multiple stands, you can minimise your costs and maximise space. Better still, you can easily fit this portable stand in your kitbag without all the weight and bulk of a sandbag. Intuitively designed with a sturdy aluminium build, this boom stand allows you to improve background and overhead lighting so you can shoot more precisely. It's particularly well suited to light or medium lighting equipment, and acts as a boom stand when used with a sandbag.This product does not include the sandbag.

Manfrotto 420CSU Combi-Boom Stand HD

Manfrotto 420CSU (420-CSU, 420/CSU, 420_CSU, 420 CSU, 420csu) Combi-Boom Stand HD Light up each and every shoot to perfection. This fantastic Combi-Boom Stand is made for small spaces, so it’s perfectly suited to studio work. Not only that, it’s packed with a whole list of user-friendly features to keep you on track with minimal fuss, and it’s ultra-easy to take with you. A removable base only adds to this clever portability, so you can store this stand or pack it into you bag as needed without fuss. This light stand is perfectly made for studio work, with lockable wheels that allow you to effortlessly move around, and stay steady when you're in position. Not only that, it’s easy to store and take with you from place to place, sliding feet add to it's compact and easy to use capabilities. And it's strong enough to hold several lights at once, making it not only portable, but heavy-lifting too. Giving you a whole world of creative possibilities, this stand has a diameter of 35mm and reaches right up to 392cm, ticking off just the right dimensions for studio work. A smart spring loading arm allows for ultra-precise height modifications too, so you can glide from one position to the next with complete accuracy, and without any wobbles. This stand weighs 5,6kg and holds a maximum payload of 12kg.

Manfrotto 320PX Perspex Panel For Mini Table

Manfrotto 320PX (320-PX, 320/PX, 320_PX, 320 PX, 320px) Perspex Panel For Mini Table The Manfrotto 320PX Plexiglass Panel is a white translucent plexiglass that mounts with touch fastener tape, and may be tilted/bent upward and locked into place, to any angle up to 90°, for totally seamless backgrounds. It is designed to fit the Manfrotto 320 shooting table frame, but may be suitable for your own shooting table frame.

Manfrotto 320PSL Mini Still Life Table without Cover

Manfrotto 320PSL (320-PSL, 320/PSL, 320_PSL, 320 PSL, 320psl) Mini Still Life Table without Cover Smaller version of Still Life Table model 220, but without perspex cover. Size of panel: 150 x 78cm. Distance from floor to flat surface: 70cm. Height with back in vertical position: 157cm. Adjustable tilting back and adjustable front legs.

Manfrotto 320 Mini Still Life Table

Manfrotto 320 (MAN-320, MAN/320, MAN_320, MAN320, MAN 320, man_320) Mini Still Life Table Smaller version of Still Life Table model 220. Size of panel: 150 x 78cm. Distance from floor to flat surface: 70cm. Height with back in vertical position: 157cm. Adjustable tilting back and adjustable front legs.

Manfrotto 299BBASE Small Brake Base Black

Manfrotto 299BBASE (299B-BASE, 299B/BASE, 299B_BASE, 299B BASE, 299bbase) Small Brake Base Black This base can be used for backlights of most sizes. Simply add a century stand column to create your own rolling stand. For leg storage fold up in a small package. Complete with braked wheels and 1 levelling leg.

Manfrotto 299B Baby Studio Stand Black

Manfrotto 299B (299-B, 299/B, 299_B, 299 B, 299b) Baby Studio Stand Black Black steel base, silver anodised aluminium sections, complete with wheels. 3 sections, 2 risers. 1 levelling leg.

Manfrotto 298B 3-Section Aluminium Studio Stand Black

Manfrotto 298B (298-B, 298/B, 298_B, 298 B, 298b) 3-Section Aluminium Studio Stand Black Black steel base, silver anodised aluminium sections, complete with wheels. 3 sections, 2 risers. 1 levelling leg.

Manfrotto 297FBASE Large Foot Base Black

Manfrotto 297FBASE (297F/BASE, 297F_BASE, 297F BASE, 297fbase) Large Foot Base Black Manfrotto Studio Black Large Foot Base with 1 levelling leg, complete with feet.

Manfrotto 297BBASE Large Brake Base Black

Manfrotto 297BBASE (297B-BASE, 297B/BASE, 297B_BASE, 297B BASE, 297bbase) Large Brake Base Black The Mafrotto 297B Wheeled Stand Base is suitable for mounting light or heavy-weighted fixtures close to the floor or ground. It has a Junior (1-1/8") female receptor for larger fixtures, and a Baby (5/8") stud for smaller fixtures. It folds for easy transport and storage.

Manfrotto 220PX Perspex Cover For Still Life Table

Manfrotto 220PX (220-PX, 220/PX, 220_PX, 220 PX, 220px) Perspex Cover For Still Life Table White, translucent perspex cover for back or front lighting. Size of panel: 200 x 122cm.

Manfrotto 220 Still Life Table

Manfrotto 220 (MAN-220, MAN/220, MAN_220, MAN220, man_220) Still Life Table Convenient, versatile, and dependable, this still life table is the perfect companion for studio photographers. Designed for capturing items in single or group shots, this accessory adds a professional touch to your kit. Featuring a translucent Perspex cover, this still life table is easy to light from the back or the front. Adjust the lighting to your desired angle thanks to this innovative add-on. Easy to assemble and disassemble, you can set it up in seconds without the need for tools. When you're done for the day, simply take it apart and tuck it neatly in you studio. It’s compact design ensures that it won't take up space, making it a smart replacement for bulky, handmade tables. The Plexiglas measures 125cm by 79cm, and can quickly be mounted with the included fastener tape. The impressive panel reaches a vertical height of 193cm when the back is in it's vertical position. With a dimension of 200 cm by 122 cm, you'll be able to capture a wide range of items in their best light. Also featuring an adjustable tilting back, you'll be able to make small adjustments with ease. This still life table can also be fitted with wheels for easy manoeuvrability. Make those product shots stand out with this nifty accessory that takes your work to the next level. Designed in Italy with the highest standards of quality, it’s built to last and withstand heavy use.

Manfrotto 146CS Steel High Stand Extension

Manfrotto 146CS (146-CS, 146/CS, 146_CS, 146 CS, 146cs) Steel High Stand Extension This Manfrotto 146CS High Steel Stand Extension attaches to the top of your heavy duty stand and extends its height an additional 53 - 123.6" (1.4 x 3.1 m). It has two locking riser sections. It tops off with a removable #3094 reversible Baby (5/8") stud with 3/8" and 1/4"-20 thread. It also will accept a Junior (1-1/8") stud.

Manfrotto 146B Aluminium High Stand Extension Black

Manfrotto 146B (146-B, 146/B, 146_B, 146 B, 146b) Aluminium High Stand Extension Black This Manfrotto 146B High Aluminum Stand Extension attaches to the top of your heavy duty stand, and extends its height an additional 53 - 123.6" (1.4 x 3.1 m). It has two locking riser sections. It tops off with a removable #3094 reversible Baby (5/8") stud with 3/8" and 1/4"-20 thread. It also will accept a Junior (1-1/8") stud.

Manfrotto 126CSU Heavy Duty Stand

Manfrotto 126CSU (126-CSU, 126/CSU, 126_CSU, 126 CSU, 126csu) Heavy Duty Stand Reliable, heavy-duty, and sturdy, this black Steel Heavy Duty Stand is the perfect choice for professional photographers using high-end equipment. Handle your lighting with ease in the studio or on location with this top-quality pick. Designed to safely support a maximum payload of up to 40kg, this 3-section stand is impressive and features the latest innovations. It's strong, double-braced legs keep your lighting stable, no matter the environment. Simply lock them in place to you designed height, and get to work knowing that the legs won't budge. Featuring a levelling leg for added safety, you can use this stand in rougher environments. With a weight of 8.3kg and added safety features, it won't easily be knocked over by strong winds or unexpected movements. Able to reach a maximum height of 333cm, you'll be able to achieve the shot you're looking for. With a universal head type 14 with a 28mm socket and a 16mm stud, this steel stand is compatible with a wide range of equipment such as 109, 110 and 110G wheel sets.

Manfrotto 126BSUAC Air-Cushioned Heavy Duty Steel Stand, Black

Manfrotto 126BSUAC (126B-SUAC, 126B/SUAC, 126B_SUAC, 126B SUAC, 126bsuac) Air-Cushioned Heavy Duty Steel Stand, Black Lightweight, secure, and dependable, this Air-cushioned Heavy Duty Junior Stand gets the job done with ease. Manufactured in Italy and meeting only the highest quality of design standards, it’s a powerful addition for on-the-go photographers and videographers. Perfect for both indoor and outdoor use, this stand is a must-have piece of equipment for both studio and location-based content creators and image makers. Benefiting from air-cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. In addition to features such as a levelling leg and double-braced legs it provides a solid support, no matter the environment. Rest assured knowing that your equipment is secure thanks to the stands locking features and professional design. The impressive specifications go on to make this stand indispensable for even the most demanding creative professionals moving from location to location. It is capable of safely supporting an impressive payload of up to 40kg, despite it's extremely lightweight design and meaning it provides the stability and quality required without having to compromise on portability. In addition with a closed length of 1.3m and extending to a maximum height of 3.33m it suits a wide range of purposes. With a universal head type 14 with a 28mm socket and 16mm stud, this stand is ideal for an extensive range of equipment. Compatible with wheel sets 109, 110 & 110G.

Manfrotto 111BSU Tall 3-Sections Stand 1 Levelling Leg, Black

Manfrotto 111BSU (111-BSU, 111/BSU, 111_BSU, 111 BSU, 111bsu) Tall 3-Sections Stand 1 Levelling Leg, Black Everything you need for any shoot - the Steel Tall Stand is made for both location and studio shoots, so you can be sure you've got the right stand for the job, regardless of what’s needed on the day. Not only that, it’s made for professionals on-the-go, with a lightweight design that makes it an easy piece of kit to carry around. Other great features include smart double leg bracing, giving you ultimate stability when you're set-up, so you'll never have to worry about your gear slipping at the crucial moment. Despite being light enough to transport without any bother, it’s heavy-lifting too. It can support up to 25kgs, so you really can be sure that this stand is up to the challenge, whatever the shoot demands. To make life even easier, this must-have stand includes universal head type 14 for total adaptability, plus a 28mm socket and a 16mm stud. This gives you everything you need in one neat package. Adding to it's portability, it can be folded away when not in use too, thanks to a 3-section design plus 2 risers, while a levelling leg enables you to get a firm footing, whatever the terrain.

Manfrotto 1005BAC-3 Aluminium Ranker Air-Cushioned Light Stand Quick Stack 3-Pack, Black

Manfrotto 1005BAC-3 (1005BAC/3, 1005BAC_3, 1005BAC3, 1005BAC 3, 1005bac-3) Aluminium Ranker Air-Cushioned Light Stand Quick Stack 3-Pack, Black The 3-Pack Ranker Stand includes three of the Ranker Lighting Stand which are super easy to use, making them the ideal choice for any professional looking to support equipment such as Studio Lighting, LED lights and a large array of studio equipment and photography accessories in the studio or on location. Top features include Manfrotto’s own Quick Stack System, clever air cushioning and a durable aluminium design. This makes it both lightweight and strong. Plus, it’s incredibly easy to transport and store thanks to an ingenious collapsible system which provides a slim profile when folded. Thanks to its aluminium frame, this light stand can hold up to an impressive 10kg, making it perfect even for heavier loads. The great benefit of the air cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. Manfrotto’s Quick Stack System allows for multiple stands of the same type to be neatly and securely clipped together for storage in the studio and for transportation when working on location, supporting your creativity by ensuring your lighting support is always on hand and you can be set up within moments. This stand features a 16mm (5/8”) upright and 90 degree angled female socket and includes a 16mm removable and reversible spigot with a 1/4” and 3/8” thread, so pairing it up with any accessory you need is quick and simple. Plus, has an extra wide 106cm footprint, giving you all the stability you need, even on tricky terrain.

Manfrotto 098SHB Black Short Wall Boom

Manfrotto 098SHB (098-SHB, 098/SHB, 098_SHB, 098 SHB, 098shb) Black Short Wall Boom Unlike the Auto Boom, which may be attached to a wall or a stand, this Manfrotto 098SHB Short Wall Boom arm must be attached to a wall. It has a black finish, and includes a double ended stud for mounting a fixture.

Manfrotto 098B Black Wall Boom

Manfrotto 098B (MAN-098B, MAN/098B, MAN_098B, MAN098B, man_098B) Black Wall Boom Wall mounted boom arm. 2 section (diameter 35, 29mm). Rotation: 160 degrees vertically and 180 degrees horizontally. 4,5kg load at maximum extension (210cm). Minimum extension: 120cm.

Manfrotto 070CSU Follow Spot Stand

Manfrotto 070CSU (070-CSU, 070/CSU, 070_CSU, 070 CSU, 070csu) Follow Spot Stand Heavy-duty, reliable and strong enough for heavy gear. The Follow Spot Stand ticks all the right boxes if you're looking for a professional standard stand that gives you the flexibility to move around easily. It’s made from hardwearing materials, with chrome plated steel legs for additional strength, and to Italy’s world-class quality standards, so you can trust this stand to last, even in the busiest studio. The chrome plated steel certainly makes this a stand to be reckoned with in terms of strength, but to add to this, the legs are double braced meaning it is strong enough to support up to 40kg. To add to these great features, this stand also has a levelling leg for super steady shots, even on the roughest ground. It's low height makes it easy for a lighting technician to follow a subject seamlessly and without obstruction. Plus, it comes with a universal head type 14, along with a 28mm socket and a 16mm stud, which makes it compatible with a whole range of photographic devices.

Manfrotto 024B Light Boom Assembly Black

Manfrotto 024B (024-B, 024/B, 024_B, 024 B, 024b) Light Boom Assembly Black This Back Light Boom attaches to the shaft of most lightstands with diameters of 19, 20, 25, 28mm. The top tube diameter: 25mm 3 sections boom arm complete with Pivoting Clamp 124, Counter Weight G-Peso 023, cable clips and locking key. The ful assembled length is 200cm.

Manfrotto 008BU Aluminium 2-Section Stand Black

Manfrotto 008BU (008-BU, 008/BU, 008_BU, 008 BU, 008bu) Aluminium 2-Section Stand Black The adaptable, robust and portable cine stand. Everything you need for any shoot is there with this super-clever Cine Stand. It’s made for both location and studio shoots, so you can be sure you've got the right stand for the job, regardless of what’s needed on the day. Not only that, it’s made for professionals on-the-go, with a lightweight design that makes it an easy piece of kit to carry around. Other great features include smart double leg bracing, giving you ultimate stability when you're set-up, so you'll never have to worry about you gear slipping at the crucial moment. Despite being light enough to transport without any bother, it’s heavy-lifting too. It can support up to 15kgs, so you're really can be sure this stand is up to the challenge, whatever the shoot demands. To make life even easier, this must-have cine stand includes universal head type 14 for total adaptability, plus a 28mm socket and a 16mm stud. This gives you everything you need in one neat package. Adding to it's portability, it can be folded away when not in use too, thanks to a 2-section design plus riser, while a levelling leg enables you to get a firm footing, whatever the terrain.

Manfrotto 007CSU Steel Senior Stand

Manfrotto 007CSU (007-CSU, 007/CSU, 007_CSU, 007 CSU, 007csu) Steel Senior Stand Ergonomically designed for heavy equipment. Our black Steel Senior Stand is for photographers who demand stable lighting wherever they shoot. This stand includes cleverly designed self-lock collars and a 3-section stand that remains firmly locked at the specified height. The strong chrome-plated steel legs include 2 section risers for reaching the desired height. Better still, this stand can handle a payload of up to 20kg, so don't be afraid to use it with some of your heavier lighting gear! Set up the stand in seconds, quickly raise or reduce the height, and level it firmly even on uneven terrain thanks to the sturdy levelling leg (included). Another great feature is the universal head type 14 with a 28mm socket and 16mm stud, which are compatible with a wide range of equipment. Compose your photos in your unique style and never let anything get in the way of that perfect shot. Compatible wheel sets: 109, 110, 110G.

Manfrotto 007BUAC Air Cushioned Aluminium Senior Stand, Black

Manfrotto 007BUAC (007-BUAC, 007/BUAC, 007_BUAC, 007 BUAC, 007buac) Air Cushioned Aluminium Senior Stand, Black Heavy-duty, dependable, and portable, the Black Air Cushioned Senior Stand is ideal for on-the-go photographers. Lightweight, yet able to withstand heavy payloads, it gets the job done with great efficiency. Featuring 3 sections with 2 risers, the intuitive self-locking collars ensure that your stand will stay put at you desired height without hassle. Extending to a maximum height of 315cm, it is ideal for capturing a wide range of shots. Weighing a mere 3kg, it is capable of safely supporting a maximum payload of 12 kg, and it folds away to 122cm when closed for easily portability. Set up quickly without catching you gear or fingers thanks to the air-cushioned parts. Extremely easy to raise and to lower, you'll be able to smoothly adjust the stand’s height without any fuss. This stand includes a universal head type 14 with a 28mm socket with a 16mm for added versatility. It also features a levelling leg for stable shooting in a variety of environments. Take it with you and take you practice to the next level. Designed in Italy with the highest standard of quality, this stand was made to withstand the tests of time and function like new throughout it's long lifespan.

Manfrotto 007BSU Black Chrome Plated 3-Section Steel Stand

Manfrotto 007BSU (007-BSU, 007/BSU, 007_BSU, 007 BSU, 007bsu) Black Chrome Plated 3-Section Steel Stand Heavy-duty, dependable, and secure, the Steel Senior Stand is a powerful tool for photographers and videographers using high-end equipment. Designed to withstand the heaviest of payloads, it's the ideal lighting stand for professionals looking to protect their gear and get the job done with efficiency. Featuring 3 sections with 2 risers, the intuitive self-locking collars ensure that you photo stand will stay put at your desired height without hassle. This means that the legs won't lose their grip and slide during shooting, saving you time and energy. Extending to a maximum height of 325cm, it is ideal for capturing a wide range of shots. Weighing 7.3kg and capable of safely supporting an impressive a maximum payload of 20kg, it folds away to 122cm so it can be neatly stored away when not in use. Including a universal head type 14 with a 28mm socket with a 16mm, you can use it with a variety of equipment for great versatility. It also features a levelling leg for stable shooting in a variety of environments. Take it with you and take you practice to the next level. Designed in Italy with the highest standard of quality, this stand was made to withstand the tests of time and function like new throughout it's long lifespan.

Matthews 40" C-Stand W/Sliding Leg, Includes Grip Head & Arm - Black

Matthews Hollywood 40" Double Riser Sliding Leg, w/ Grip Head and Arm — Black, MD-B756040 (MD_B756040, MD/B756040, MD B756040, B756040) One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm. Available in Black Finish. Universally seen as the best C-Stand, Griphead and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world.  Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient, safe tightening with little effort. Comes with our Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an additional Grip Head for positioning.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

Manfrotto MAN-A5034 Roller Stand 34 with Folding Base

Manfrotto MAN-A5034 (MAN/A5034, MAN_A5034, MANA5034, MAN A5034, man-a5034) Roller Stand 34 with Folding Base This Avenger roller stand with 4 sections and 3 risers features steel legs and column, and risers in aluminium. It can support a payload up to 20kg and can reach a maximum height of 3.40m. It features wheels for easy transportation and its legs fold up for better storage.

Manfrotto MAN-1005BAC Ranker Lighting Air Cushioned Aluminium Stand, Black

Manfrotto MAN-1005BAC (MAN_1005BAC, 1005-BAC, 1005BAC, 1005bac) Ranker Lighting Air Cushioned Aluminium Stand, Black Our Ranker Lighting Stand is super easy to use, making it the ideal choice for any professional looking to support equipment such as Studio Lighting, LED lights and a large array of studio equipment and photography accessories in the studio or on location. Top features include Manfrotto’s own Quick Stack System, clever air cushioning and a durable aluminium design. This makes it both lightweight and strong. Plus, it’s incredibly easy to transport and store thanks to an ingenious collapsible system which provides a slim profile when folded. Thanks to its aluminium frame, this light stand can hold up to an impressive 10kg, making it perfect even for heavier loads. The great benefit of the air cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. Manfrotto’s Quick Stack System allows for multiple stands of the same type to be neatly and securely clipped together for storage in the studio and for transportation when working on location, supporting your creativity by ensuring your lighting support is always on hand and you can be set up within moments. This stand features a upright and 90 degree angled female socket and includes a 5/8” removable and reversible spigot with a 1/4” and 3/8” thread, so pairing it up with any accessory you need is quick and simple. Plus, has an extra wide 106cm footprint, giving you all the stability you need, even on tricky terrain.

Manfrotto MAN-LL-LB7943 Panoramic Background 4m Chroma Key Blue

Manfrotto MAN-LL-LB7943 (MAN/LL/LB7943, MAN_LL_LB7943, MAN-LL LB7943, LL LB7943) Panoramic Background 4m Chroma Key Blue The Panoramic is a collapsible 4m (13’) wide, 2.3m (7’5”) high background that folds down neatly into its own carry case and fits easily into a car. Weighing only 9kg (19.8lb) it’s ideal for busy image-makers on the move. The background is completely self-supporting and can be set up in minutes. The structure comprises three individual aluminium framed sections, connected together with a hinge clip to allow the background to be set up flat to lean against a wall or with the side frames folded in to create a wraparound effect. The Chroma Key Blue cover just simply clips to the aluminium frame and creates a taught, seamless surface.

Kino Flo DFS-FS10-S Free Style Mini Snap Bag with 2, Diffusion

Kino Flo DFS-FS10-S (DFS_FS10-S, DFS/FS10-S, DFSFS10-S, DFS FS10-S) Free Style Mini Snap Bag with 2, Diffusion. Designed to soften the output of the fixture's bright LEDs, the Freestyle Mini Snapbag from Kino Flo includes both 1/2 diffusion and full diffusion, and attaches to the Snapbag via touch-fasteners to offer softness options. Its silver reflective interior maximizes output. The Snapbag attaches directly to the Mini without speed rings or adapters.

Kino Flo MTP-BG41S Grip 41K Mount with Baby Receiver Short, 16mm

Kino Flo MTP-BG41S (MTP_BG41S, MTPBG41S, MTP BG41S, MTP/BG41S) Grip 41K Mount with Baby Receiver Short, 16mm. Make your fixture easier to transport and handle with this KinoGrip K41 Twist-On Mount with 5/8" Baby Receiver Short from Kino Flo. Able to work with fixtures featuring Twist-On mating plates, this mount will add a grip handle for easier maneuvering of the light, as well as a wing knob for making quick adjustments and locking the light in position.

Kino Flo DFS-FS40-H FreeStyle 41 Flozier, Half

Kino Flo DFS-FS40-H (DFS_FS40-H, DFS/FS40-H, DFSFS40-H, DFS FS40-H) FreeStyle 41 Flozier, Half. The Flozier Half for FreeStyle 41 LED Light from Kino Flo attaches to the fixture's barndoors and softens the output of the bright LEDs. The Flozier absorbs a 1/2-stop of light.

Kino Flo LED-152X-230U FreeStyle 152 LED DMX Controller, Univ 230U

Kino Flo LED-152X-230U (LED152X-230U, LED 152X-230U, LED/152X-230U, LED_152X-230U) FreeStyle 152 LED DMX Controller, Univ 230U. The White menu features Dimming, tunable Kelvin range from 2700K tungsten to 6500K daylight and Green/Magenta control channels. The Green/Magenta control can be scaled from 0- to 100, where 25 = ¼ correction, 50 = ½ correction and 100 = full correction. In the Gels/Hue menu, the Kelvin range is extended to 2500K Kelvin to 9900K daylight and a fourth channel is called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor as well as over 100 well-known lighting gels. The gel function can be applied to any Kelvin temperature and by pushing the control knob in/out, the gel will be applied or removed. A fifth channel called Hue Angle (Hue) and sixth channel Saturation (Sat) are also included in the gel menu. These two channels behave similar to a traditional colour wheel, where white light is in the center and Hue Angle determines the colour along a 360-degree range and Saturation determines how much colour is applied. With the Hue Angle and Saturation it is possible to create over 2 million colour combinations!  The RGB colour menu gives individual control of red, green and blue LED’s. The RGB mode is a great way to work with apps with predetermined RGB presets or colour wheels. RGB menu is also a great feature to dial in specific gel RGB values or when controlling colours from a DMX desk.  The FX (Effects) menu introduced on June 1, 2018 provides access to popular effects such as Candle, Fire, TV, Police, Lightning, Paparazzi, Pulse and Scroll. When on the desired effect, there are several pre-sets as well as control parameters that can be altered. For example, in the Lightning effect there is a “Storm” and “Frankenstein” preset, but it is possible to change Rate to provide additional variation. For FreeStyle LED DMX Mapping, click here. The firmware listed above is loaded onto the FreeStyle LED controller and can operate the Freestyle 31 fixture remotely with a 25ft extension cable or can drive the panel directly when mounted to the back of the fixture. The Freestyle controller (LED-152X), includes standard DMX in/out ports for cable as well as wireless DMX connectivity (Lumen Radio®). The controller features universal AC voltage input 100-240vac (0.65 Amps at 230vac) as well as a 3-Pin XLR for 24vdc operation (6.25A). The FreeStyle 152 LED DMX controller firmware is updatable from a PC using the Mini B USB data port. For the latest True Match Firmware update available.

Kino Flo SYS-FT41U FreeStyle T41 DMX System, Univ

Kino Flo SYS-FT41U (SYSFT41U, SYS_FT41U, SYS FT41U, SYS/FT41U) FreeStyle T41 DMX System, Univ. This FreeStyle T41 DMX System Universal from Kino Flo features the FreeStyle T21 LED fixture and FreeStyle 120 LED DMX controller. It utilizes a single 4' LED tube and also includes the KinoGrip K41 mount with Baby receiver, 25' head extension cable, US power cable, and a 2-pin Euro power cable. Slim and compact, the FreeStyle T41 DMX System offers the same Color Science LED technology found in all Kino Flo LEDs. The portable and lightweight fixture can fit easily into tight locations or be handheld with the included KinoGrip 41K mount, which also allows mounting via its 3/8" pin. Additionally, the back of the fixture comes with a twist-on removable center mount, which can be adapted to work with multiple Kino Flo mounting adapters. The FreeStyle DMX Controller features four individual modes: White, Gels/Hue Color, RGB Color, and FX. The White mode features dimming from 1 to 100% and a tunable range of 2700 to 6500K. In the Gels/Hue Color mode, the range is expanded from 2500 to 9900K. The gel channel also includes Kino Flo presets such as blue and green screen, sodium vapor, and mercury vapor, as well as over 100 well-known lighting gels. RGB Color mode gives individual control of red, green, and blue LEDs, and in FX mode you are provided access to popular effects such as candle, fire, TV, police, lightning, paparazzi, pulse, and scroll. Single 4' LED tube in T21 LED Fixture Adjustable color temperature from 2500 to 9900K 1 to 100% dimming without color shifts Flicker-free and quiet operation Gel presets include blue and green screen, sodium vapor, and mercury vapor, as well as over 100 well-known lighting gels FX mode for popular effects such as candle, fire, TV, police, lightning, paparazzi, pulse, and scroll Full-range onboard and DMX dimming DMX wireless link 25' head extension cable for versatility in mounting and controlling fixture in hard-to-reach locations Handgrip with 3/8" pin for stand mounting

Kino Flo Diva-Lite 30 LED DMX Kit Universal with Soft Case

Kino Flo KIT-DL30XBU (DL30XBU, KIT_DL30XBU, KIT/DL30XBU, KITDL30XBU) Diva-Lite 30 LED DMX Kit Universal with Soft Case The Diva-Lite 30 LED DMX Kit Universal with Soft Case from Kino Flo offers the latest LED technology in a slim and popular form factor. The kit comes with a Diva-Lite 30 LED Fixture, 90-degree louver, lollipop 5/8" receiver, and a soft padded case. The light features variable color temperature with DMX control, and the padded case with dual straps protect the light and its components during storage and transport. The Diva-Lite 30 LED offers a high CRI of 95 with variable color temperature control from 2500 to 9900K, and the flicker-free light offers a full dimming range without color shifts. An RGB color menu gives individual control of red, green, and blue LED's, and an FX menu provides access to popular effects such as Candle, Fire, TV, Police, Lightning, Paparazzi, Pulse and Scroll. The Diva-Lite 30 offers manual onboard or remote DMX control of all of these functions, and the fixture also has a built-in Lumen Radio receiver for wireless DMX control. The fixture's 100-240 VAC power supply make it ready for worldwide use, and the light has the added benefit of being able to run on pro batteries when mains power is unavailable. Adjustable color temperature from 2500 to 9900K 1 to 100% dimming without color shifts Flicker-free and quiet operation FX mode for popular effects such as candle, fire, TV, police, lightning, paparazzi, pulse, and scroll DMX Wireless Link   Padded case with dual straps protect the light during storage and transport

Kino Flo Diva-Lite LED 20 DMX 2-Light Kit with Flight Case

Kino Flo KIT-DL22XU (DL22XU, KIT_DL22XU, KIT/DL22XU, KITDL22XU) Diva-Lite LED 20 DMX 2-Light Kit with Flight Case The Diva-Lite® LED’s blend Kino Flo’s popular fixture with its tunable LED family line. The Diva-Lite LED lights feature dial-in variable colour temperature control from 2500K to 9900K, full-range dimming, programmable presets and DMX wireless capability. As with the Celeb and Select LED’s, the Diva-Lite LED’s soft white light doesn’t flicker or shift colour temperature when dimmed. Light levels are consistent throughout the Kelvin range. The Diva-Lite LED’s feature a Green/Magenta control to match the spectral curves of the most popular cameras and other light sources on set. With built-in DMX and Lumen Radio® receivers, the Diva-Lite LED’s can be controlled by DMX and/or DMX wireless. The Diva-Lite LED’s run on universal input from 100-240VAC or 24VDC with as little as 0.65A, 230VAC (Diva-Lite LED 30). With its versatility and unique features, the Diva-Lite LED is the perfect imaging tool for use in any studio production or on location. The new firmware upgrade includes four Mode options, the White Mode, the Gel Mode, RGB Mode and the special effect Mode. Users who prefer to work with clean white light can use the ""white Mode"". Tjis Mode will give you access to Dimming, Kelvin and Green/Magenta control channels. Kelvin range is from 2700K tungsten to 6500K daylight. In the Gel Mode, the Kelvin range travels from 2500K tungsten to 9900K daylight, and Kino Flo has set up a fourth channel called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapour, mercury vapour and over 100 well-known lighting gels. In addition, there is also a fifth channel for Hue Angle control and a sixth channel for Saturation. These two channels behave like a traditional colour wheel, where you have white light in the center and the Hue angle determines the colour along a 360-degree range. Saturation determines how much colour is applied. The second colour Mode provides individual red, green and blue (RGB) control. The RGB Mode is a great way to work with apps with predetermined RGB presets or colour wheels.The newly introduced Special Effects Mode gives full access to Kino Flo designed effects like Fire, TV, Police, Paparazzi and many more. In addition you can fine tune these effects to your needs and safe them on the preset buttons.

Kino Flo KIT-DL20XU Diva-Lite LED 20 DMX Kit with Travel Case

Kino Flo KIT-DL20XU (DL20XU, KIT_DL20XU, KIT/DL20XU, KITDL20XU) Diva-Lite LED 20 DMX Kit with Travel Case Kino Flo has put together this Diva-Lite LED 20 DMX Kit with Travel Case for image makers working in the studio or on the road. The kit includes a Diva-Lite 20 DMX RGB fixture with a center mount, built-in barndoors, and a removable louver (grid). A hard, clamshell-type case is also included for storage. Kino Flo Diva-Lite LED 20 DMX The Diva-Lite LED 20 DMX from Kino Flo combines a popular, time-tested form factor with the latest in LED technology. The light offers a high CRI of 95 and variable color temperature from 2700 to 6500K with magenta/green hue control to match the spectral curves on different cameras and other light sources on the set. Flicker-free, full range dimming without color shift is also offered. The 25 x 13 x 6" Diva-Lite 20 offers manual onboard or DMX512 control of all of these functions. In fact, the fixture has a built-in Lumen Radio receiver for wireless DMX control. The Diva-Lite LED 20 DMX's 100-240 VAC make it ready for worldwide use. Alternatively, it can run on pro batteries when mains power is unavailable. The light comes with a 90-degree honeycomb grid and a lollipop mount with a 5/8" receiver. Kino Flo Clamshell Case for Diva 20 Fixture and Accessories (Yellow)   Store, protect, and transport your Diva 20 lighting fixture, controller, 25' extension cord, mount, stand, and more with the yellow Clamshell Case for Diva 20 Fixture and Accessories from Kino Flo. The case has a hard shell for impact protection and features latch closure for easy access to gear. Carry the case with the large top handle.

Kino Flo BAG-SL30 Soft Case for Select 30 Fixture and Accessories

Kino Flo BAG-SL30 (SL30, BAGSL30, BAG_SL30, BAG/SL30) Soft Case for Select 30 Fixture and Accessories Store, protect, and transport your Select 30 lighting fixture, controller, 25' extension cord, mount, and more with the black Soft Case for the Select 30 Fixture and Accessories from Kino Flo. The case is padded for impact protection and features zipper closure for easy access to gear. Carry the case with the dual strap handles and touch-fastening fabric connector.

Kino Flo BAG-SL20 Soft Case for Select 20 Fixture and Accessories

Kino Flo BAG-SL20 (SL20, BAGSL20, BAG_SL20, BAG/SL20) Soft Case for Select 20 Fixture and Accessories Store, protect, and transport your Select 20 lighting fixture, controller, 25' extension cord, mount, and more with the black Soft Case for the Select 20 Fixture and Accessories from Kino Flo. The case is padded for impact protection and features zipper closure for easy access to gear. Carry the case with the dual strap handles and touch-fastening fabric connector.

Kino Flo KAS-DL21-C Diva-Lite LED Clamshell Case

Kino Flo KAS-DL21-C (DL21-C, KASDL21C, KAS_DL21_C, kas-dl21-c) Diva-Lite LED Clamshell Case Store, transport, and protect your Kino Flo Diva-Lite 21 LED and stand with the yellow Diva-Lite LED Clamshell Case from Kino Flo. The case features latches and a top handle.

Manfrotto MAN-A4050CS Steel Boom Stand 50 (Chrome-plated)

Manfrotto MAN-A4050CS (MANA4050CS, A4050CS, MAN A4050CS, MAN/A4050CS) Steel Boom Stand 50 (Chrome-plated). The Avenger A4050CS 16.4' Steel Boom Stand 50 is a heavy duty, chrome-plated steel support that can be used traditionally as a light stand, or converted to a boom via a pivot in the first riser. The A4050CS also features a leveling leg for rough or uneven terrain. An optional counterweight is strongly recommended when using the stand in boom mode.

Manfrotto MAN-387XU Super Wind-Up Steel Stand - 12'

Manfrotto MAN-387XU (MAN/387XU, MAN 387XU, 387XU, MAN387XU) Super Wind-Up Steel Stand - 12'. This Manfroto Super Wind-Up Stand has chrome steel double risers which extend simultaneously. Fold away crank handle. This is a 3 section stand -- one of the strongest stands available. To order this stand with braked wheels, order AVB250X.

Manfrotto MAN-032 Single Autopole

Manfrotto MAN-032 (MAN032, MAN 032, MAN/032, 032) Single Autopole. This is a single Manfrotto Autopole. These single action locking cam Autopoles mount between the floor and ceiling of a studio. If the studio ceiling is higher than 12.2' (3.7 m), Autopole bases or Autopole extensions may be ordered separately. Autopoles support backgrounds, lights, and grip arms with the addition of Super Clamps, Hooks, and crossbars. Strong support for backgrounds, lights and grip Brushed aluminum finish 45.4 mm tube diameter.

Manfrotto MAN-B6040X Super Wind-up 40 Stand with Braked Wheels (Stainless/Chrome-plated, 12.6')

Manfrotto MAN-B6040X (MANB6040X, MAN B6040X, MAN/B6040X, B6040X) Super Wind-up 40 Stand with Braked Wheels (Stainless/Chrome-plated, 12.6'). The 12.6' Avenger Super Wind-up 40 Stand with Braked Wheels is a heavy-duty, chrome-plated and stainless steel stand that rises to a maximum height of 12.6' feet. It features a fold-away crank handle (wind-up) and a leveling leg for uneven terrain.

Manfrotto MAN-FF3512N86 Pantograph with Wire Cable

Manfrotto MAN-FF3512N86 (MANFF3512N86, FF3512N86, MAN FF3512N86, MAN/FF3512N86) Pantograph with Wire Cable. This is the Manfrotto FF3512N86 Pantograph with Wire Cable (Old Cat. No: 3250/2). The pantograph is made of aluminum and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 5/8" (16 mm), female on the top and male on the bottom. The load is supported by a steel cable of 0.08 inch. diameter (safety factor 12). It extends from a closed length of 10.6" (27cm) to a maximum extension of 6.5 feet (200cm) Loads of up to 26 lb can be suspended using only the friction device, while loads up to a maximum of 40 lb require the use of the optional springs. The pantograph can be adjusted to keep suspended loads from 2 lb to 10 lb perfectly balanced. The colored notched ring can adjust the pantograph's friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary. It is advisable to use springs to aid raising the pantograph. When choosing the additional spring (s) for your pantograph, you will first need to know exactly which model of pantograph you have, in order that you can select the spring of the correct length. If you have the new compact pantograph, the TOP 2 version (above) has a red notched ring, while the TOP 4 version has a blue notched ring.

Manfrotto MAN-299FBASE Base with Universal Head (No Wheels)

Manfrotto MAN-299FBASE (MAN299FBASE, MAN 299FBASE, 299FBASE, MAN/299FBASE) Base with Universal Head (No Wheels). A folding stand base only. No wheels. It has a leveling leg extender for use on uneven terrain. Accepts 1-1/8" diameter Junior studs or stand risers. 8.3 in (21 cm) tall, 29.8 in (.75 M) footprint. Supports up to 88 lbs (40 kg).

Manfrotto MAN-LL-LB7901 Panoramic Background (13', Granite)

Manfrotto MAN-LL-LB7901 (MANLL-LB7901, MAN LL-LB7901, MAN/LL-LB7901, LL-LB7901) Panoramic Background (13', Granite). The granite 13’ Panoramic Background from Lastolite has a crease-free textile surface. It features a collapsible, 3-panel aluminum framework that creates a self-supporting wraparound structure. The frame snaps together with elastic cord contained within the framework's tubing. The fabric clips to the aluminum frame. This background system is suitable for shooting large groups for weddings, prom nights, and event photography. The frame collapses down into its own zippered case.

Manfrotto MAN-387XBU Black Steel Super Wind-Up Stand - 12 Inches (3.6m)

Manfrotto MAN-387XBU (MAN387XBU, 387XBU, MAN 387XBU, MAN/387XBU) Black Steel Super Wind-Up Stand - 12 Inches (3.6m). The Manfrotto 387XBU Black Steel Super Wind-Up Stand rises to a maximum height of 12' (3.6 m). It is similar to the 387XU, but it adds an improved finish that remains black longer and has a higher resistance to corrosion. This heavy duty stand has two risers. The ascent and descent of the sections is controlled by two steel cables, which are activated by unlocking the safeties and turning the crank. It has a Junior (1-1/8") female receptor. To mount fixtures with Baby receptors, order Avenger part #E200. The 387XBU has a leveling leg, to add stability to the load when you are using it on uneven terrain. It also has eyelets so that you may secure optional wind-bracing devices such as #087WBK, or your own wires or rope. Improved finish provides a longer working life for the stand. Column thickness consistency provides better tube coupling. Welded user step enables you to adjust mounted fixtures when the stand is fully extended.

Manfrotto MAN-A1035CS Avenger Combo Stand 35 steel

Manfrotto MAN-A1035CS (MANA1035CS, MAN A1035CS, MAN/A1035CS, A1035CS) Avenger Combo Stand 35 steel. Avenger Combo Stand 35 is a chrome steel stand with 3 sections and 2 risers. It's a heavy duty stand that can support a payload up to 40kg and can reach a maximum height of 3.50m. It is also compatible with A900N braked wheels which are sold separately. It features a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto MAN-270CSU Super Steel Cine Stand with Leveling Leg - 15.5' (4.7m)

Manfrotto MAN-270CSU (MAN270CSU, 270CSU, MAN 270CSU, MAN/270CSU) Super Steel Cine Stand with Leveling Leg - 15.5' (4.7m). This is a Manfrotto 270CSU Chrome-Plated Steel Stand. It has four sections, and three risers. If the surface is uneven, as in a hill or stairs, extend and lock the third "lazy" leg to give the proper support without having to add apple boxes. Its load capacity is 29.76 lb (13.5 kg) at maximum extension at a 6° incline. On level ground, at minimum extension, its capacity is 88 lb (40kg). Universal Mount This stand is fitted with a universal mount with a Junior 1-1/8" (28mm) socket plus a Baby (5/8") removable, reversible stud with 1/4"-20 and 3/8" threads. Double Braced Leg Base Provides extra stability giving the stand more strength.

Manfrotto MAN-269HDBU Super High Aluminum Stand with Leveling Leg - Black - 24'

Manfrotto MAN-269HDBU (MAN269HDBU, MAN 269HDBU, MAN/269HDBU, 269HDBU) Super High Aluminum Stand with Leveling Leg - Black - 24'. The Manfroto Super High Black Anodized Aluminum Stand is one of the tallest stands available. It will support a maximum load of 22 lbs. At its maximum height, it will support a load of 2.2 lbs without additional bracing or sandbags. This light stand features an independently adjustable leg, which can be extended to level the light stand on uneven terrain or stairs. Wide Base Sure-footed stability at maximum heights Two Finishes Available This stand is also available with a chrome steel finish. Quick Set Up Sets up easily in a matter of seconds Double Braced Leg Base Provides extra stability and strength.

Manfrotto MAN-1004BAC-3 Alu Master Air Cushioned Light Stand Quick Stack 3-Pack (Black, 12')

Manfrotto MAN-1004BAC-3 (MAN1004BAC-3, 1004BAC-3, MAN/1004BAC-3, MAN 1004BAC-3) Alu Master Air Cushioned Light Stand Quick Stack 3-Pack (Black, 12'). This is a Manfrotto Alu Master Air Cushioned Light Stand Quick Stack 3-Pack . Each stand in this set is a 4 section, 3 riser aluminum light stand with a black anodized finish that extends to a maximum height of 12' (4 m). Each stand features QSS (Quick Stack System), which allows the 3 stands to be stacked and bolted together when they are closed for storage or transport. Quick Set-up Sets up easily in a matter of seconds Very Stable Engineered to be stable under recommended loads Aluminum Locking Collars Pressure die cast aluminum Double-Braced Leg Base Extra stability and strength.

Manfrotto MAN-LL-LB7902 Lastolite Panoramic Background (13', Limestone)

Manfrotto MAN-LL-LB7902 (MANLL-LB7902, LL-LB7902, MAN LL-LB7902, MAN/LL-LB7902) Lastolite Panoramic Background (13', Limestone). The limestone 13’ Panoramic Background from Lastolite has a crease-free textile surface. It features a collapsible, 3-panel aluminum framework that creates a self-supporting wraparound structure. The frame snaps together with elastic cord contained within the framework's tubing. The fabric clips to the aluminum frame. This background system is suitable for shooting large groups for weddings, prom nights, and event photography. The frame collapses down into its own zippered case.

Manfrotto MAN-076B Single Autopole (4.9-8.8', Black)

Manfrotto MAN-076B (MAN 076B, MAN/076B, 076B, MAN076B) Single Autopole (4.9-8.8', Black). The Manfrotto 076B Single Autopole, in a black anodized finish, is a single-action locking cam aluminum Autopole. It mounts between the floor and ceiling of a studio. If the studio ceiling is higher than 8.8 feet, Autopole bases and extensions may be ordered separately. Autopoles support backgrounds, lights, and grip arms with the addition of Super Clamps, hooks, and crossbars.

Manfrotto MAN-420B Combi Boom Stand (Black)

Manfrotto MAN-420B (MAN420B, 420B, MAN 420B, MAN/420B) Combi Boom Stand (Black). This is a Manfrotto Combi Boom Stand.  Extend the second riser of this medium duty black aluminum light stand to its maximum, press a lever, and you have a stand with a two section boom arm. When used as a boom stand, its maximum load is 4.5 lbs (2 kg) -- strong enough for a small light fixture with a small softbox or umbrella. A sandbag counterweight is supplied (empty) and recommended whenever boom is extended. Sets up easily in a matter of seconds Column extension locking collars made from pressure die cast aluminum Boom telescopes from 44 to 75.2" (111.7 - 191 cm) Double leg bracing provides extra stability giving the stand more strength

Manfrotto MAN-816 Super Salon 280 Camera Stand

Manfrotto MAN-816 (MAN 816, MAN816, 816, MAN/816) Super Salon 280 Camera Stand - 9'. The Manfrotto Super Salon 280 Camera Stand offers support for every camera size, and generally vary by versatility of their movements. They're equipped with retractable wheels for easier placement around the studio. The Super Salon 280 (old cat #0841) is Manfrotto's flagship of the segment, sporting a pneumatically dampened column which travels nearly to the height of 9 ft. The Super Salon 280 has a 4 in diameter black anodized aluminum column and a 39.3 in horizontal camera arm that travels 24.4 in. The wheels are engaged and disengaged with a single foot pedal, and the lateral arm sports a counterbalanced rack-and-pinion drive mechanism. Heavy Duty Supports all formats of cameras Full Camera Movement The camera support platform allows movement of 360°. Rack and Pinion Drive The arm is accurately counter-balanced to move smoothly up and down.

Manfrotto MAN-A5017 Avenger Roller Stand 17 with Folding Base

Manfrotto MAN-A5017 (MANA5017, MAN/A5017, MAN A5017, A5017) Avenger Roller Stand 17 with Folding Base. This Avenger roller stand with 3 sections and 2 risers, features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and can reach a maximum height of 1.70m. It features wheels for easy transportation and its legs fold up for better storage.

Manfrotto MAN-1052BAC-3 Alu Air-Cushioned Compact Stand Quick Stack 3-Pack (Black, 7.7')

Manfrotto MAN-1052BAC-3 (1052BAC-3, MAN 1052BAC-3, MAN1052BAC-3, MAN/1052BAC-3) Alu Air-Cushioned Compact Stand Quick Stack 3-Pack (Black, 7.7'). This is a Manfrotto Alu Air-Cushioned Compact Stand Quick Stack 3-Pack. Each stand rises to a maximum height of 7.75' (2.3 m), and is air cushioned. Formerly known as a "Stacker", these stands now have what is called the QSS - Quick Stand System. When folded, these 3 stands may connected to each other to ease storage or transport. Air cushioning protects fingers and mounted equipment. If the stand sections are not sufficiently tightened, mounted equipment eases down to minimum height instead of slamming down suddenly. Versatile Top Spigot Baby (5/8") spigot is topped with a 3/8" thread, that thread is topped by a removable 1/4-20" thread.

Manfrotto MAN-MS0490C Carbon Fiber Nanopole Stand (6.5')

Manfrotto MAN-MS0490C (MS0490C, MANMS0490C, MAN/MS0490C, MAN MS0490C) Carbon Fiber Nanopole Stand (6.5'). Manfrotto has pushed the envelope on their popular Nano stand with the introduction of the 5-section MS0490C Carbon Fiber Nanopole Stand The stand rises to a maximum height of 6.5', has a minimum working height of 19.7', a stable 39.4" footprint, and can support gear weighing up to 3.3 lb at maximum height mounted onto its 5/8" stud with both 1/4"-20 and 3/8"-16 threads. The stand's reverse-folding leg design allows it to be broken down to just 20" in length, while its weight of just 1.65 lb is sure to make it a favorite of nature and location photographers, as well as backpackers and campers. These impressive specs might be enough for most stands, but not the MS0490C. The stand has a leveling leg that allows it to be adjusted to center the weight on uneven surfaces such as hills or curbs, or tucked under furniture. Another benefit is the removable center column that can be used as a 5-section boom to hold a light or microphone overhead. Lightest Nano Stand Ever The Carbon Nanopole Stand is Manfrotto's lightest Nano Stand ever, tailored to photographers, videographers, and content creators looking for ways to downsize their gear and travel lighter. Lightweight Trend Lighting equipment is getting lighter and so are lighting supports. Ideal for Small Lighting Equipment Weighing in at only 1.65 lb thanks to its lightweight aluminum base and carbon fiber column, the Carbon Nanopole Stand is the ideal support for small lighting equipment up to 3.3 lb, such as speedlights and LED lights. Compact Stand Fits Anywhere The compact folded length of just 20" makes the Carbon Nanopole Stand suitable for carry-on luggage or ideal for those with very limited carrying space. It even slides neatly into the tripod pouch on the side of most camera bags or backpacks. Leveling Leg The Carbon Nanopole features a useful leveling leg, allowing the user to maintain a stable vertical lighting support even in challenging environments such as uneven ground. Multiple Connection Options This versatile light stand features multiple attachment options including a stainless steel 5/8" spigot with a 3/8"-16 thread, plus a removable 1/4"-20 thread adapter allowing for secure attachment of a wide range of lighting tools. Removable Center Column The removable carbon fiber center column features quick release twist locks, and it can be used as a handheld boom to position lights or even a microphone exactly where they are needed.

Manfrotto MAN-1004BAC Alu Master Air-Cushioned Stand (Black, 12')

Manfrotto MAN-1004BAC (MAN1004BAC, MAN 1004BAC, MAN/1004BAC, 004BAC) Alu Master Air-Cushioned Stand (Black, 12'). The 12' Manfrotto Alu Master Air-Cushioned Stand is a lightweight support with an impressive load capacity. A clever design feature called QSS (Quick Stack System) allows the stand to fold flat, enabling several stands to be clipped together to save space in the studio or on the road. The Alu Master comes with a 5/8" (16mm) "Baby" stud, a 1/4"-20 screw, and a 3/8"-16 screw. It features air cushioning to ensure the soft descent of fragile equipment when the locking knob is loosened. Quick Set-up Sets up easily in a matter of seconds Very Stable Engineered to be stable under recommended loads Aluminum Locking Collars Pressure die cast aluminum Double-Braced Leg Base Extra stability and strength.

Manfrotto MAN-1051BAC-3 Alu Mini Compact Air-Cushioned Stand Quick Stack 3-Pack (Black, 7')

Manfrotto MAN-1051BAC-3 (MAN1051BAC-3, MAN 1051BAC-3, 1051BAC-3, MAN/1051BAC-3) Alu Mini Compact Air-Cushioned Stand Quick Stack 3-Pack (Black, 7'). This is the black, 7' Manfrotto Alu Mini Compact Air-Cushioned Stand Quick Stack 3-Pack. With a patented Quick Stack System (QSS), ease of transport is optimized. Connecting the stands together saves a lot of room while storing them in the studio or in a location case.

Manfrotto MAN-1314B Background Support System (9' Width)

Manfrotto MAN-1314B (MAN1314B, MAN 1314B, 1314B, MAN/1314B) Background Support System (9' Width). With background paper or cloth for a photo, you need a secure way to hold it--the Manfrotto Background Support System will handle it. Two light stands that extend up to 7.75', a pole that extends more than 9' to hold the background, 2 spring clamps to hold the background in place, and a bag to carry everything--you're ready to shoot.

Manfrotto MAN-087NWSHB Short Wind-Up Stand (Black, 9')

Manfrotto MAN-087NWSHB (MAN087NWSHB, 087NWSHB, MAN 087NWSHB, MAN/087NWSHB) Short Wind-Up Stand (Black, 9'). The 9' Manfrotto Short Wind-Up Stand is a black steel stand with geared column and one leveling leg. Rugged and heavy duty. It combines the strength, stability and portability that is required by today's demanding professionals. Like all Manfrotto Cine Style stands, it features Universal Mounts which have both a 1-1/8" and 5/8" female socket as well as a 5/8" male stud. Elevating sections rise 1.75 in with each handle turn. Leveling leg allows stable positioning of load on uneven terrain. Three Sections, with two risers.

Manfrotto MAN-008CSU Steel Junior Stand

Manfrotto MAN-008CSU (MAN008CSU, MAN/008CSU, 008CSU, MAN 008CSU) Steel Junior Stand The Manfrotto Steel Junior Stand is a heavy-duty stand for location or studio. It comes with a double-braced leg base for extra stability and safety. This tripod stand also provides one leveling leg for stability on uneven terrain.

Manfrotto MAN-396B-3 Double Articulated Arm - 3 Sections With Camera Bracket

Manfrotto MAN-396B-3 (MAN/396B-3, MAN396B-3, 396B-3, MAN 396B-3) Double Articulated Arm - 3 Sections With Camera Bracket The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads -- up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system. The bottom spigot is hexagonal, for a sure fit into a Manfrotto or Avenger Super Clamp, or a Matthew Mafer. It also has a universal adapter section for attaching to a wide range of stands, clamps and other grip equipment. This arm also includes a camera platform (bracket) with a standard 5/8 inch spigot receptor and 1/4-20 inch mounting screw. Easy to use, even in reduced spaces. Quick lock mechanism needs only a quarter-turn to lock firmly.

Manfrotto MAN-087NWB Wind-Up Stand

Manfrotto MAN-087NWB (MAN087NWB, MAN 087NWB, 087NWB, MAN/087NWB) Wind-Up Stand The 12' Manfrotto Wind-Up Stand is a black, chrome-plated steel stand with geared column and one leveling leg. Rugged and heavy duty, it combines the strength, stability and portability that are required by today's demanding professionals. Like all Bogen cine-style stands, it features a Universal Mount which has both a 1-1/8" Junior and 5/8" Baby receiver as well as a 5/8" Baby stud. Elevating sections rise 1.75" with each handle turn. Leveling leg allows stable positioning of load on uneven terrain. Three Sections, with two risers.  

Dedolight DPIR 18 Leaf Iris for Projection Attachment

Dedolight DPIR (DL-DPIR, DL/DPIR, DL_DPIR, dpir) 18 Leaf Iris for Projection Attachment A full metal iris allowing the creation of almost perfectly round images in varying sizes. The standard Dedolight iris features a continuous movement of 18 leaves.

Dedolight DPBA-14HON Honeycomb for DPBA-14 Parallel Beam attachment

Dedolight DPBA-14HON (DPBA/14HON, DPBA_14HON, dpba-14hon) Honeycomb for DPBA-14 Parallel Beam attachment Dedolight Honeycomb for DPBA-14 Parallel Beam attachment for Series 400/402 and DLED9/DLED10 Lights

Dedolight DLOBML-LT20 Soft Tube for LEDzilla On Camera LED Light

Dedolight DLOBML-LT20 (DLOBML/LT20, DLOBML_LT20, dlobml-lt20) Soft Tube for LEDzilla On Camera LED Light The Dedolight 8" Soft Tube Light Shaper is another in the expanding line of accessories and light shaping tools for the LEDzilla DLOBML on camera LED light. This one is a 8" tube that turns the light's output into something akin to a soft fluorescent glow similar to single tube fixtures from Kino Flo. Ideal for car interiors or any application which places a light source in very close proximity, the Soft Tube Light Shaper is equipped with folding plastic barndoors for greater control of the LEDzilla's output.

Dedolight DSCST Soft Bag for 3x DST400 and Accessories

Dedolight DSCST (DL-DSCST, DL/DSCST, DL_DSCST, dscst) Soft Bag for 3x DST400 and Accessories The Dedolight DSCST Stand Bag is made to carry three Dedolight DST-400 light stands. Two straps wrap around the case to seal it closed. Carried by dual handles with an overlapping grip. Soft case made to carry light stands from a lighting kit Two straps wrap around the case to seal it closed Dual handles with overlapping grips  

Dedolight DT3-BAT DC electronics for DLED3-D/-T TURBO LED light heads

Dedolight DT3-BAT (dt3-bat, DT3/BAT, DT3_BAT) DC electronics for DLED3-D/-T TURBO LED light heads Power up your DLED3 daylight or tungsten LED light while on location with this DT3-BAT DC Ballast which sports a D-Tap connection for working from a battery or other portable power source. This ballast is dimmable for control over your fixture. Additionally, it accepts a wide range of voltages from 11-36 VDC.

Dedolight DLGRIDM Silver Dome Foldable Soft Grid Medium 40 Degree

Dedolight DLGRIDM (DL-DLGRIDM, DL/DLGRIDM, DL_DLGRIDM, dlgridm) Silver Dome Foldable Soft Grid Medium 40 Degree This Dedolight Collapsible Fabric Grid limits the light spread of a medium 24 x 32" softbox to 40°. Grids are essential accessories for any lighting system. A grid alters the shape and intensity of the light output from your softbox when it is mounted on a light head. Consider a grid as a painter would a brush or a sculptor would a knife or chisel. Fabric grids are hand-stitched and collapse easily for storage or transport. Use of a fabric grid will result in a narrower spread of light. The spread of light will be determined by the density of the honeycomb mesh and the distance of the subject from the light.

DLPA5G Grid 40 Degree, fits dedolight PanAura/Octodome 5

Dedolight DLPA5G (DL_PA5G, DL-PA5G, DL/PA5G, dlpa5g) Grid 40 Degree, fits dedolight PanAura/Octodome 5 The 40° Grid for 5' PanAura Octodome from Dedolight limits the PanAura's soft, wide beam spread to 40° to control spill light and concentrate the output on the subject without affecting the background or other elements of the set. The grid folds flat for storage when not in use.

Dedolight DT7-BAT-AB DC electronics for DLED7 Turbo Daylight or Tungsten light heads

Dedolight DT7-BAT-AB DC (DT7/BAT/AB, DT7_BAT_AB, dt7-bat-ab) electronics for DLED7 Turbo Daylight or Tungsten light heads Power up a daylight or tungsten DLED7 Turbo Series LED light from a battery with this DT7-BAT-AB DC Ballast from Dedolight, which features a D-Tap input connector and a voltage of 11-36 VDC.

Dedolight DT7 AC Ballast

Dedolight DT7 (DT-7, DT/7, DT_7, dt7) AC Ballast Power up a daylight or tungsten DLED7 Turbo Series LED light with this DT7 AC Ballast from Dedolight, which features a universal voltage of 90-264 VAC. This ballast provides support for dimming for advanced control over your light.

DSC2 Soft Case for Dedolight Large Lighting Kits

Dedolight DSC2 (DSC-2, DSC/2, DSC_2, dsc2) Soft Case for Dedolight Large Lighting Kits The Dedolight DSC2 Soft Case is made to carry a large Dedolight lighting kit. It will protect the equipment even when shipped as checked baggage. The case is carried by top and side carrying handles. Dual carrying handles add convenience.

Dedolight DLPA3 PanAura Octodome (3')

Dedolight DLPA3 (DL-PA3, DL/PA3, DL_PA3, dlpa3) PanAura Octodome (3') Dedolight PanAura Octodome 3ft features a very large diffusion surface area that produces a flattering wrap-around, soft light. The PanAura is extremely flat, making it ideal for work in confined space.

Dedolight DT7-BI Power supply for DLED7-BI TURBO LED light heads

Dedolight DT7-BI (DT7/BI, DT7_BI, dt7-bi) Power supply for DLED7-BI TURBO LED light heads Power up a bi-color DLED7 Turbo Series LED light with this DT7-BI AC Ballast from Dedolight, which features a universal voltage of 90-264 VAC. This ballast provides support for dimming and color tuning for advanced control over your light. This model also features a digital display for viewing the color temperature as it is adjusted.

Dedolight DPBA-14 Parallel Beam Attachment For DLED10-BI

Dedolight DPBA-14 (DPBA/14, DPBA_14, dpba-14) Parallel Beam Attachment For DLED10-BI DPBA-14 is constructed with non-spherical optics to match the double non-spherical optics of our DLH400DT light. This light, already in its original state, offers an incredible range from flood angle to very tight spot, nearly 4%. The amazing fact is that by adding the DPBA-14, the non-spherical parallel beam adapter, you put the light head in a position of full flood or near full flood, and the light output is two times or even more in comparison to the original light output in its spot position. This, making it a very useful, very powerful, very clean beam. Stray light can be diminished by a honeycomb front attachment for the parallel beam attachment. These optical attachments can also be used on some (not all) of our new LED light fixtures. They will definitely also work on our halogen light fixture DLH650.

Dedolight DSCXLW Soft Bag X-Large with Dividers and Wheels

Dedolight DSCXLW (DSC-XLW, DSC/XLW, DSC_XLW, dscxlw) Soft Bag X-Large with Dividers and Wheels The Dedolight DSCXLW Wheeled Soft Case is made to carry a Dedolight S5B or S5M Interviewer lighting kits. It will protect the equipment even when shipped as checked baggage. The case is carried by 2 side carrying handles and wheels. Compatible with: Dedolight S5B or S5M Interviewer lighting kits

Dedolight DLPA5 PanAura/Octodome 5, fits

Dedolight DLPA5 (DL-PA5, DL/PA5, DL_PA5, dlpa5) PanAura/Octodome 5, fits Dedolight PanAura Octodome 5ft features a very large diffusion surface area that produces a flattering wrap-around, soft light.

Dedolight DSC2W Soft Bag Medium with Wheels - 72x27x29cm

Dedolight DSC2W (DSC/2W, DSC-2W, DSC_2W, dsc2w) Soft Bag Medium with Wheels - 72x27x29cm Dedolight Soft Cases are extremely robust and offer excellent protection for the equipment, even when used as checked baggage during air travel. Especially useful for mobile teams.  Dividers inside the case are useful and are adjustable for individual requirements.

Portabrace LPB-LED4 Carrying Case for 4 Litepanels 1X1 Lights (Midnight Black)

Portabrace LPB-LED4 (LPB_LED4, LPB/LED4, LPB LED4) Carrying Case for 4 Litepanels 1X1 Lights (Midnight Black) The LP-LED4 Carrying Cases is designed to carry 4 (LED4) Lite Panel 1X1's or similar LED lights. Each case is made using 1000-denier Cordura® material that is foam-padded to protect the light panels during transport. There is a thick, foam-padded "U" shape at the base of the case for extra protection against drops. The top-loading zipper design gives you quick access to your light panel during setup. A comfortable suede leather shoulder strap is included for carrying the cases and light over your shoulder.

Portabrace LP-1B Light Pack Case (Black)

Portabrace LP-1B (LP_1B, LP/1B, LP 1B) Light Pack Case (Black) The LP-1B Carrying Case is a long and narrow rigid-frame case ideal for transporting and protecting small light heads and stands or long, 800mm lens kits. It is constructed using abrasion-resistant 1000-denier Cordura® nylon treated with an extra layer of waterproof protection.  There is a lightweight, rigid-core frame lined with 1-inch thick soft padding, covered with a soft Veltex® lining.  Padded bendable dividers are included for separating contents inside the case.  The bottom of the case is lined with an anti-skid rubber material, which makes water and dirt easy to wipe off. Included with the LP-1 is a comfortable suede-leather (HB-1040) Shoulder Strap, five (5) Bendable Dividers, one (1) Small Medium Fleece Pillow for cushioning equipment and a 9-inch by 9-inch Padded Stuff Sack(PB-B9) for storing delicate accessories. Suggested uses for the LP-1B Multiple Lowel PRO Power Tungsten LED Lights Lowel Tota or similar tungsten light kits Mole Richardson Nooklite kits 24-inch Kino Flo daylight and tungsten tubes along with a ballast and header cable Small light stands and miscellaneous grip-heads Small tripods and other film and video accessories 800mm Lenses such as Canon, Nikon or Sigma  

Portabrace BK-2NR Lightweight, Rigid-Frame Video Camera Backpack

Portabrace BK-2NR (BK2NR, BK\2NR, BK 2NR, B-K-2NR) BK-2NR Lightweight, Rigid-Frame Video Camera Backpack Here at PortaBrace we’ve developed a reputation for tough bags and cases that professionals depend on. With the BK-2NR Lightweight Rigid-Frame Video Camera Backpack we’re continuing that tradition. While lightweight and easy to carry--thanks to non-slip straps, a waist belt and removable straps, and extra closed-cell foam padding--the BK-2NR is also extremely strong thanks to its rigid frame. Made from corrugated plastic, the frame protects a camcorder up to 12” long. Other features of the pack that protect your camcorder include two removable 7 x 13” dividers (one of them corrugated), a camera cradle, a PB-SMP small pillow, and a CC stuffer block. Of course, the 1000-denier Cordura exterior provides the same look and strength of other PortaBrace bags. Additional items included with the pack are the PB-B6 pouch, the PB-B9 pouch, awhite balance card, and the CARA-BRNZ carabiner and flashlight combo. The BK-2NR backpack also features 15 pockets of various shapes and sizes. A padded interior pocket holds a laptop up to 17”, while the side tripod pocket with cinch strap keep your tripod safe and secure. You can also store gear in the two side hook and loop pockets for easy access, or the three side slip pockets, a front hook and loop pocket (with interior slip pocket), or front mesh pockets. The bag also has four clear interior vinyl zipper pockets so you can easily find what you’re looking for.  

Portabrace BK-2N Lightweight, Rigid-Frame Video Camera Backpack

Portabrace BK-2N (BK2N, BK\2N, BK 2N, B-K-2N) Lightweight, Rigid-Frame Video Camera Backpack The BK-2N Backpack Camera Case, Medium (Signature Blue) is a padded 1000 denier Cordura backpack made to carry various camcorders up to 12" long with a laptop computer and tripod. The case has a padded pocket that will hold a 17" laptop computer, side tripod pocket with a cinch strap, camera cradle and additional accessory pockets. It includes a PB-B6 pouch, PB-B9 pouch, PB-SMP small pillow, CC stuffer block and a white balance card. The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. A LI-GLW illumination strip light pocket is included. Construction 1000 denier Cordura nylon Non-absorbent closed-cell foam padding Removable soft divider 7.0 x 11" Removable ridged divider 7.0 x 11" PB-SMP small pillow to protect camcorder CC stuffer block to cushion camcorder Zipper closure Pockets Padded laptop pocket for 17" laptop computer Two side hook and loop pockets Side mesh pocket Three side slip pockets Front mesh pockets Front hook and loop pocket with interior slip pocket Four clear interior vinyl zipper pockets Side tripod pocket with cinch strap

Shape Blackmagic URSA Mini Handle Kit

Shape SH-HANDUR (SH/HANDUR, SH HANDUR, SHHANDUR, HANDUR, sh-handur) Blackmagic URSA Mini Handle Kit This handle kit is perfect to use the Blackmagic URSA Mini in several configuration. Both handles include ARRI rosette standard to attach on the camera or on a Baseplate. The Blackmagic URSA Mini remote extension handle offers an ajustable arm extension for the side hand grip provided with the URSA Mini. It features Shape's patented push button technology for easy angle adjustment and 360 degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. The single telescopic handle is a versatile and adjustable handgrip that is perfect to use with the URSA Mini. Allowing 1.5" of extension and a 360 degree rotation of the arm and handgrip provided by the the push-button technology.

Canon SG-1 Shoulder-Style Grip Unit

Canon 1754C001AA (175/4C001AA, 175-4C001AA, 175 4C00/1AA, 175 4C00-1AA) (SG1, SG 1, SG/1) SG-1 Shoulder-Style Grip Unit The SG-1 Shoulder-Style Grip Unit from Canon enables you to control your EF lenses like regular ENG video lenses. It features a grip/rocker assembly that mounts on the rods of the separately available SU-15 Shoulder Support Unit. With it, you can control record start/stop, iris/aperture, and - if supported by the lens - zoom. It connects to the camera via a 12-pin connector, which also supplies the units power. 

Canon ZSG-C10 Zoom Grip for Compact-Servo Lens

Canon 1715C003AA (171/5C003AA, 171-5C003AA, 171 5C003AA, 1715C00/3AA) (ZSGC10 , ZSG/C10, ZSG/C10, ZS/GC10 ) ZSG-C10 Zoom Grip for Compact-Servo Lens Designed specifically for use with CN-E Compact-Servo lenses, the Canon ZSG-C10 Zoom Grip adds an ENG-style operation to your camera setup. It has an ergonomic form factor for comfortable operation and features a seesaw rocker for zoom control, as well as REC start/stop and ONE-SHOT AF buttons. Because the grip provides electronic control for the drive unit, rather than mechanically driving the lens itself, you can choose to mount it directly to the side of the lens (using an included screw-on rosette) or mount it to an ARRI standard rosette elsewhere on your shoulder rig, as long as the 20-pin cable is still connected to the lens drive unit.

Canon 1485C001 BG-E20 Battery Grip for EOS 5D Mark IV

Canon 1485C001 (BG/E20, BG_E20, BG E20, BGE20, bg_e20) BG-E20 Battery Grip for EOS 5D Mark IV Extend your shooting time when travelling or shooting on location by using two batteries with your compatible DSLR. Fitting both LP-E6 and LP-E6N batteries, this battery grip offers duplicate controls, such as shutter release or AF point selection, working in both landscape and portrait orientation for intuitive control of your camera. Use up to two batteries at once with the EOS 5D Mark IV, extending your shooting time Compatible both LP-E6 and LP-E6N batteries or an optional DC Coupler DR-E6 and AC Adapter AC-E6N Featuring a variety of controls such as a shutter button, main dial, multi-controller, AF point selection button, AE/FE lock button, AF start button, and multifunction button making it ideal for vertical shooting An oversized grip is more comfortable for those with larger hands and makes it easier to hold the camera vertically

Shape Telescopic Handles with ARRI Rosettes (Black)

Shape SH-HAND12SHADOW (SH_HAND12SHADOW, SHHAND12SHADOW, SH/HAND12SHADOW, SH HAND12SHADOW) Telescopic Handles with ARRI Rosettes (Black) The black Telescopic Handles with ARRI Rosettes from SHAPE are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups.

Shape Wooden Replacement for Left Rubber Handle Clamp

Shape SH-WL-HAND (SH_WL_HAND, SHWL-HAND, SH/WL-HAND, SH WL-HAND) Wooden Replacement for Left Rubber Handle Clamp Shape made these wooden hand grips to replace the rubber clamp handles and add a natural and ergonomic feeling. This product is compatible with the entire SHAPE HANDLE line, the aluminium bracket inside the wood handle is designed to facilitate the handle replacement. The wooden hand grip was designed with an ergonomic surface to add more comfort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high-quality varnish top-coat to provide more durability. It is also made in Canada and covered by Life time warranty on wood parts and CNC machined parts.

Shape Right Wooden Handle Grip for ARRI Rosette

Shape SH-WR-HAND1 (SH_WR_HAND1, SHWR-HAND1, SH/WR-HAND1, SH WR-HAND1) Right Wooden Handle Grip for ARRI Rosette This product combines wooden hand grips with well known technology to add a nice natural touch to your rig. The handle offers two points of adjustment for an optimal user comfort. The wooden hand grip was designed with an ergonomic surface to add more confort when you are shooting for long hours.

Shape Left Wooden Handle Grip for ARRI Rosette

Shape SH-WL-HAND1 (SH_WL_HAND1, SHWL-HAND1, SH/WL-HAND1, SH WL-HAND1) Left Wooden Handle Grip for ARRI Rosette Shape is well known for its red push button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degree rotation to place the handle in the best position for your use. This product combines our new wooden hand grips with our well known patented technology to add a nice natural touch to your rig. This product is compatible with standard ARRI rosettes to install on any SHAPE rig, fixed on either the ARRI Alexa, or the ARRI Amira cameras and all others based on ARRI standard rosettes. It also screws in with a red ratchet knob.The handle offers two points of adjustment for an optimal user comfort. The wooden hand grip was designed with an ergonomic surface to add more confort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability.  

Shape Single Left Telescopic Wooden Handle Grip for ARRI Rosette

Shape SH-WL-HAND3 (SH_WL_HAND3, SHWL-HAND3, SH/WL-HAND3, SH WL-HAND3) Single Left Telescopic Wooden Handle Grip for ARRI Rosette Shape is well known for its push button handle, now used by so many professionals in the industry. They have developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degrees of rotation to place the handle in the best position for your use.  This product is compatible with standard ARRI rosettes to install on any SHAPE rig, fixed on the ARRI Alexa, and ARRI Amira cameras and all others based on ARRI standard rosettes screw with ratchet red knob. The Telescopic Handles have 4 points of adjustment on each handle; one with the ARRI rosette that is attached to the camera's baseplate, two push buttons with 360 degree rotation and one red knob screw to adjust the length. The length is adjustable up to 1,5 additional inches (3,81 cm), and it also gives you the possibility to rotate the arm on the inside to change the grip position and place it inside for a more centred position. This product combines the new wooden hand grips with the well known patented technology to add a nice natural touch to your rig. The wooden hand grip was designed with an ergonomic surface to add more comfort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. It is also made in Canada and covered by a Lifetime warranty on wood parts and CNC machined parts.

Shape Double Telescopic Wooden Handle Grips for ARRI Rosettes

Shape SH-W-HAND12 (SH_W_HAND12, SHW-HAND12, SH/W-HAND12, SH W-HAND12) Double Telescopic Wooden Handle Grips for ARRI Rosettes Shape is well known for its push button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustments. By simply pressing the red button, you are allowed a 360 degrees of rotation to place the handle in the best position for your use. This product is compatible with standard ARRI rosettes to install on any Shape rig, fixed on the ARRI Alexa, and ARRI Amira cameras and all others based on the ARRI standard rosettes, screws with a ratcheting red knob. The Telescopic Handles have 4 points of adjustment on each handle; one with the ARRI rosette that is attached to the camera's baseplate, two push buttons with 360 degree rotational handles and one red knob screw to adjust the length. The length is adjustable up to 1,5 additional inches (3,81 cm), and also gives you the possibility to rotate the arm on the inside to change the grip position and place it inside for a more centred position. This product combines our new wooden hand grips with our well known patented technologyto add a nice natural touch to your rig. The wooden hand grip was designed with an ergonomic surface to add more confort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. It is also made in Canada and covered by our Lifetime warranty on wood parts and CNC machined parts.

Shape Canon 18-80 Remote Extension Handle

Shape SH-CARH (SHCARH, SH/CARH, SH CARH, CARH, sh-carh) Canon 18-80 Remote Extension Handle The CANON 18-80 REMOTE EXTENSION HANDLE from SHAPE offers an adjustable arm extension for the removable zoom handle. It features SHAPE's patented push button technology for easy angle adjustment and 360 degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm.

Shape 15mm Rod Indexable Right Side Wooden Handle

Shape SH-R15WH (SHR15WH, SH/R15WH, SH R15WH, R15WH, sh-r15wh) 15mm Rod Indexable Right Side Wooden Handle Shape introduces its new ergonomic 15mm Rod Indexable Mini Push-Button Right Side Wooden Handle with Padded Strap, providing a secure and solid grip for handheld shooting. This brand new Shape Right Side Wooden Handle features a comfortable padded strap, a convenient built-in cold shoe mount and a Shape standard 1/4"-20 anti-rotating pattern, both located on top of the handle. The width of the grip can be easily adjusted using the rod clamp on the cage. You can also quickly adjust the angle and position of the handgrip by using the patented Shape Mini Push-Button located on the handle.

Shape 15mm Rod Indexable Left Side Wooden Handle

Shape SH-L15WH (SHL15WH, SH/L15WH, SH L15WH, L15WH, sh-l15wh) 15mm Rod Indexable Left Side Wooden Handle Shape introduces its new ergonomic 15mm Rod Indexable Mini Push-Button Left Side Wooden Handle with Padded Strap, providing a secure and solid grip for handheld shooting. This brand new Shape Left Side Wooden Handle features a comfortable padded strap, a convenient built-in cold shoe mount and a Shape standard 1/4"-20 anti-rotating pattern, both located on top of the handle. The width of the grip can be easily adjusted using the rod clamp on the cage. You can also quickly adjust the angle and position of the handgrip by using the patented Shape Mini Push-Button located on the handle.

Shape Push-Button Viewfinder Mount for Panasonic AU-EVA1 Cinema Camera

Shape SH-EVVF (SHEVVF, SH/EVVF, SH EVVF, EVVF, sh-evvf) Push-Button Viewfinder Mount for Panasonic AU-EVA1 Cinema Camera The Push-Button Viewfinder Mount from SHAPE is compatible with the Panasonic AU-EVA1 camera. The mount is designed with an L-bracket with two ratchet knobs for quick mounting and adjustment. It features two points of articulation with SHAPE patented push-button design allowing horizontal, vertical, and transversal adjustment of your viewfinder. The viewfinder can be secured to the bracket with a captive screw, and three 1/4"-20 threaded holes provide additional mounting options.

Shape 2 x V-Mount Battery Plates and Cable Kit for Atomos Sumo

Shape SH-2VMAB (SH2VMAB, SH/2VMAB, SH 2VMAB, sh-2vmab) 2 x V-Mount Plates & D-Tap Cables for Atomos Sumo These 2 x V-Mount Plates from SHAPE enable you to power your Atomos Sumo monitor using longer-lasting, pro-style batteries. Two D-Tap to right-angle 4-pin XLR power cables are included with the battery plates.

Shape 2 x Gold Mount Plates & D-Tap Cables for Atomos Sumo

Shape SH-2GMSB (SH2GMSB, SH/2GMSB, SH 2GMSB, sh-2gmsb) 2 x Gold Mount Plates & D-Tap Cables for Atomos Sumo These 2 x Gold Mount Plates from SHAPE enable you to power your Atomos Sumo monitor using longer-lasting, pro-style batteries. Two D-Tap to right-angle 4-pin XLR power cables are included with the battery plates.  

Manfrotto A2033L C-Stand 33 Sliding Leg

Manfrotto A2033L (MAN-A2033L, MAN/A2033L, MAN_A2033L, MANA2033L, man_a2033l) C-Stand 33 Sliding Leg Turtle base chrome plated steel stand with 3 sections and 2 risers. It features one sliding leg to keep the stand steady on uneven surfaces. This stand has a maximum payload of 10kg and maximum height of 3.28m. The stand is also available in a black finish version.

Vocas 0350-1400 Separate Top Handgrip

Vocas 0350-1400 (0350_1400, 0350/1400, 03501400, 0350-1400) Separate Top Handgrip This Vocas Top Handgrip provides select Blackmagic Design, Canon, Sony, and RED cameras with a pair of adjustable 15mm top rods and a comfortable handgrip. The Top Handgrip includes two pins for attaching a carrying strap.

Shape Canon C100/C300/C500 Offset Rig

Shape SH-C100-OF (SHC100-OF, SH/C100-OF, SH C100-OF, C100-OF, sh-c100-of) Canon C100/C300/C500 Offset Rig The Shape Canon C100/C300/C500 Offset Rig is for handheld shooting and specifically designed to work with the Canon Cinema EOS line of cameras, using the included baseplate. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder. It includes Shape's C100/C300/C500 baseplate which features 15mm rod clamps with spring-loaded levers and 12" 15mm rods. The baseplate maintains the proper lens center to rod height for use with available rod mounted accessories. The included Quick Handle Rod Bloc is a rod mounted handgrip assembly that mounts to LWS 15mm rods. It features Shape's push button rosette release, which allow you to adjust the angle of the handgrips without having to remove your hands from the rig. The offset bracket shifts the weight of the camera to your shoulder and provides rod brackets for attaching rods and the shoulder pad, as well as available accessories. The included Back Pad attaches to the back of the shoulder pad and features sliding height adjustment for your comfort and a 1/4"-20 threaded hole for mounting additional accessories. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Baseplate for Canon C300 Camera The Shape C300 Baseplate is made specifically for the Canon EOS C300 Camera. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15mm rods that are 12" long through the length of the baseplate. This baseplate attaches underneath the camera with 4 x M4 screws or with 3/8”-16 and 1/4”-20 screws that are included. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount.

Shape Telescopic Handles with ARRI Rosettes (Black & Red)

Shape SH-HAND12 (SH_HAND12, SHHAND12, SH/HAND12, SH HAND12) Telescopic Handles with ARRI Rosettes (Black & Red) Shape is well known for its push button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustments. By simply pressing the red button, you are allowed 360 degrees of rotation to place the handle in the best position for your use.  This product is compatible with standard ARRI rosettes to install on any SHAPE rig, fixed on the ARRI Alexa, and ARRI Amira cameras and all others based on the ARRI standard rosettes, screws with a ratcheting red knob. The Telescopic Handles have 4 points of adjustment on each handle; one with the ARRI rosette that is attached to the camera's baseplate, two push buttons with 360-degree rotational handles and one red knob screw to adjust the length. The length is adjustable up to 1,5 additional inches (3,81 cm), and also gives you the possibility to rotate the arm on the inside to change the grip position and place it inside for a more centred position. This product combines our new wooden hand grips with our well-known patented technology to add a nice natural touch to your rig. The wooden hand grip was designed with an ergonomic surface to add more comfort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high-quality varnish top-coat to provide more durability. It is also made in Canada and covered by our Lifetime warranty on wood parts and CNC machined parts.

Manfrotto B6029X Super Wind Up 29 Low Base

Manfrotto B6029X (MAN-B6029X, MAN/B6029X, MAN_B6029X, MANB6029X, b6029x) Super Wind Up 29 Low BaseThe Avenger Super Wind Up stand is built with a stainless-steel column, stainless-steel legs, chrome steel risers and geared column. B6029X is constructed of 3 sections and 2 risers which extend simultaneously at 4.4cm per handle turn. An internal safety cable system ensures simultaneous retrieval of all sections. It is provided with a rapid and fine adjustment levelling leg and braked foam filled wheels (code 474) for easy rolling even on the most challenging terrain. It has a maximum payload of 80kg and can raise up to 2.9m. It also features 1 step on the column to make easy adjustments when loaded.

Manfrotto B6039CS Wind Up Stand 39

Manfrotto B6039CS (MAN-B6039CS, MAN/B6039CS, MAN_B6039CS, MANB6039CS, b6039cs) Wind Up Stand 39 This heavy lifting stand in chrome steel features 3 sections, and 2 risers. It is provided with a wind up handle and has 1 levelling leg, and braked wheels. With a maximum payload of 30kg, it can also raise up to 3.70m. It also features 1 step on the column for better stability for the operator.

Manfrotto B7034FF Long John Silver Junior Stand

Manfrotto B7034FF (MAN-B7034FF, MAN/B7034FF, MAN_B7034FF, MANB7034FF, man_b7034ff) Long John Silver Junior Stand Avenger B7034FF Long John Silver Junior (Jr.) Stand is a heavy-duty Strato Safe stand used primarily for cine applications capable of supporting maximum payloads up to 120kg up to a height of 3.4m. The winch driven hoisting system allows for easy lift and lowering of whatever you have placed on top of the LJS Jr. The product includes foam filled braked wheels, 1 built-in levelling leg and swift-lift gas pistons providing the ultimate ease of set-up and take down. The stand is made of steel and aluminium and features 4 sections, 3 risers and can perform perfectly on set, in studio or in any location! Recommended Accessories: 425B, D650, E200, G300 and 087WBK.

Manfrotto B7057FF Long John Silver Stand

Manfrotto B7057FF (MAN-B7057FF, MAN/B7057FF, MAN_B7057FF, MANB7057FF, b7057ff) Long John Silver Stand Avenger B7057FF Long John Silver Stand is a heavy-duty stand used primarily for cine applications capable of supporting maximum payloads up to 120 kg up to a height of 5.7 m. The winch driven hoisting system allows for easy lift and lowering of whatever you have placed on top of the LJS. The product includes foam filled braked wheels, 3 built-in levelling legs and swift-lift gas pistons providing the ultimate ease of set-up and take down. The stand is made of steel and aluminium and features 5 sections, 4 risers and can perform perfectly on set, in studio or in any location!

Manfrotto 231CS Chrome Steel Column Stand

Manfrotto 231CS (231-CS, 231/CS, 231_CS, 231 CS, 231cs) Chrome Steel Column Stand Innovative, compact and easy to transport. you can't ask for more from a Column Light Stand, this essential piece of kit is designed to top professional standards and makes short work of even the trickiest shoots. It’s made to Italy’s world leading quality standards too, so you know it’s built to last, and it’s totally robust, so you won't need to worry about it buckling under pressure. This lighting stand is perfectly made for studio work, with lockable wheels that allow you to effortlessly move around, and stay steady when you're in position. Not only that, it’s easy to store and take with you from place to place, thanks to a clever removable base, while sliding feet add to it's compact and easy to use capabilities. And it's strong enough to hold several lights at once, making it not only portable, but heavy-lifting too. Giving you a whole world of creative possibilities, this stand has a diameter of 35mm and reaches right up to 250cms, ticking off just the right dimensions for studio work. A smart spring loading arm allows for ultra-precise height modifications too, so you can glide from one position to the next with complete accuracy, and without any wobbles.

Manfrotto 320B Mini Still Life Table Black

Manfrotto 320B (320-B, 320/B, 320_B, 320 B, 320b) Mini Still Life Table Black Smaller version of Still Life Table model 220, but black painted. Size of panel: 150 x 78cm. Distance from floor to flat surface: 70cm. Height with back in vertical position: 157cm. Adjustable tilting back and adjustable front legs.

Manfrotto 025BS Light Boom Black Included Stand

Manfrotto 025BS (025-BS, 025/BS, 025_BS, 025 BS, 025bs) Light Boom Black Included Stand Manoeuvrable, durable, and convenient, the black Super Boom Stand is a smart addition for professional photographers looking to get more out of their equipment. Ideal for both studio and location-based shoots, it sets up in a flash and is capable of supporting heavy payloads with great security. Made from black aluminium, this boom stand is portable and reliable. Weighing 21kg, it can support a payload of up to 5kg. Thanks to its sturdy design and double-braced legs, you can rest assured knowing that your equipment is secure while shooting. For easy manoeuvrability and storage, the solid base includes wheels, allowing you to change the stand’s positioning in a flash. Also featuring a levelling leg, you’ll be able to use this boom stand on uneven terrain without struggle. Made up of three sturdy pieces, this boom stand quickly assembles and dissembles for added portability. Take it with you and piece it together while on location to save on space. Featuring a tube diameter of 35mm with a Pivoting Clamp 123, a Counter Weight 022, a Cine Stand with casters, and cable clips, you’ll have everything you need to get to work. Extended to a maximum height of 100cm, this boom stand is ideal for a variety of uses.

Manfrotto 025BSL Superboom Black without Stand

Manfrotto 025BSL (025-BSL, 025/BSL, 025_BSL, 025 BSL, 025bsl) Superboom Black without Stand Top tube diameter 35mm. 1 section boom complete with Pivoting Clamp 123, Counter Weight 022, cable clips.

Manfrotto 025TM Superboom With Column Stand

Manfrotto 025TM (025-TM, 025/TM, 025_TM, 025 TM, 025tm) Superboom With Column Stand Top tube diameter 35mm. 1 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, Cable Clips and Column Stand with casters.

Kino Flo Image L80 Ship Case

Kino Flo Image L80 Ship Case(KAS-I80-1) The Kino Flo 80 Ship Case is used to hold one Image 80 fixture and cable. It is reinforced plywood with a vinyl covering, metal hasps, and has reinforced corners. Wheels ease transport Side and top handles for convenience

Kino Flo STD-M36 Medium Duty Stand/ Black (36")

STD-M36 Medium Duty Stand/ Black (36")  

Matthews B377701 Mini Max

Matthews B377701 (B 377701 B-377701 B/377701) Mini Max Mini Max has a maximum operating arc of 105" (265cm) reaching a Maximum Height of 16' (489cm) to 3' (92cm) below ground level. MINI MAX also features 3 Rocky Mountain Legs for non-level terrain. Mini Max is the smaller compact version of our very successful and very popular MAX. Like its larger counterpart, Mini Max allows you to hang a fixture in places where no other lighting support system may go - either into a corner or flush to the wall - as there are neither rear rails nor pipes required for counterbalance. When the POV will not accommodate a stand or fixture placement, MINI MAX can 'fly' right in, making it possible to strategically place either a Key Light, Top Light or Back Light. Mini Max can support a 20lb (9.1kg) fixture 9ft (274cm) high on a 9ft (274cm) horizontal extension. Mini Max will operate on a 105" (265cm) maximum arc from 16ft (489cm) high to 3ft (92cm) below horizontal. Mini Max has a maximum operating arc of 105" (265cm) reaching a Maximum Height of 16' (489cm) to 3' (92cm) below ground level. Maximum Horizontal Extension is 9' (274cm) Mini Max features 3 Rocky Mountain Legs for non-level terrain, stairs or curbsides without the need for Apple Boxes.  

Matthews 350598 MiniGrip Mounting Kit

MATTHEWS 350598 MiniGrip Mounting Kit MINIGRIP is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. MINIGRIP - A whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands...the MINIGRIP kit consists of four lightweight 2" MiniGrip Heads with 3/8" and 5/8" mounting holes...two new Mini-Matthellini Clamps...which are half as large as the regular Matthellini but with just as many uses and two 20" arms. The MINIGRIP kit can be used with camera attachments and other accessories as well as lighting equipment. These miniature tools are ideal for tabletop photography, car interiors, and otherwise confined areas. The high impact composite material used in the manufacturing of these products is very strong, yet extremely light making them ideal for supporting camera accessories. It packs up into its own carrying bag. Patent Pending.

Matthews 20" c-Stand W/Sliding Leg, Includes Grip Head & Arm - Chrome

Matthews 20" c-Stand W/Sliding Leg, Includes Grip Head & Arm - Chrome(MD-756020) The term 'Century Stand' goes back to the early days of motion picture production. Before there was artificial lighting the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes but it seems the most popular was the 100 inch, or 'century', sized reflector. In later years, studios, grips and gaffers began to manufacture the earliest versions of what we now call C-Stands. The original C-Stands had welded bases that did not fold up or adjust but the fact that they easily nested together made them invaluable on the stage. Century Stands, or 'C' stands, are an important component in the image maker's arsenal of tools. These popular stands are available in many different configurations, lengths and finishes. The unique staggered leg design allows C-Stands to be nested and therefore be placed extremely close to one another on set. The lower leg can also be slid under many objects. The C+ offers a removable base for the risers, making disassembly for travel simple and easy without being cumbersome or having the awkwardness typical of other manufacturers. The sliding leg allows for use on stairs, off curbs and even as high as a desk or countertop. Patents applied for and pending. Fast, easy opening and closing.

Manfrotto MAN-A2018F Avenger C-Stand 18

Manfrotto MAN-A2018F (MAN/A2018F, MAN_A2018F, A2018F, man_a2018f) Avenger C-Stand 18Turtle base chrome plated steel stand with 3 sections and 2 risers. Legs folds flat for easy storage. This stand has a maximum payload of 8kg and maximum height of 1.75m. This stand is also available in black.