Rycote 048473 Replacement X Small Modular Bar

This Rycote Replacement X Small Modular Bar is used to extend the length of the Rycote Modular Suspensions system to accommodate larger microphones.

Rycote 016924 Connbox CB3 (2XLR-3F)

Rycote Connbox CB3 2XLR-3F – M/S Stereo Mic Cable for Windshield Systems 016924 Connbox CB3 (2XLR-3F) (cb-3, cb/3, 2xlr3f, 2xlr/3f) An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings. Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble. The Connbox is made of the highest quality components, using Gold 3-pin Neutrik X-series XLR connectors, and an ultra soft Mogami star-quad cable. What it does:   Connects 2 microphones → 1 XLR output (M/S stereo) Reduces handling & cable noise Designed for Rycote windshield systems Acts as a shock-isolated cable junction  

Rycote 157406 Wireless Receiver Bracket MKII

The Rycote Wireless Receiver Camera Bracket MKII is a universal wireless microphone receiver holder used to mount receivers onto a 1/4" mount or flash shoe on any camera. The bracket features a brass thumbwheel which makes secure mounting easier as well as larger overall dimensions to improve compatibility with receivers. As with the Mk I it has 4 soft grip pads and hook-&-loop straps for securing receivers in place. A shoe mount is included.

Rycote 107317 20 x Single Triangular White Mic Flag

Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter. Fits A Wide Range Of Microphones With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag. Lightweight But Tough Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm. If you want your branding seen on screen, use Rycote’s Mic Flags!

Rycote 107316 20 x Single Square White Mic Flag

Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter. Fits A Wide Range Of Microphones With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag. Lightweight But Tough Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm. If you want your branding seen on screen, use Rycote’s Mic Flags!

Rycote 066312 Overcovers Adv, White (Master Carto of 10 Packs)

Stickies Advanced are double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement. Stickies Advanced are designed to remain secure when attached to a dry surface and are intended to be discarded after use. Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.

Rycote 066310 Overcovers Adv, Grey (Master Cartons of 10 Packs)

Stickies Advanced are double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement. Stickies Advanced are designed to remain secure when attached to a dry surface and are intended to be discarded after use. Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.

Rycote 066309 Overcovers Adv, Black (Master Carton of 10 Packs)

Stickies Advanced are double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement. Stickies Advanced are designed to remain secure when attached to a dry surface and are intended to be discarded after use. Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.

Rycote 066304 Stickies Adv, 20mm Squared (Box of 10 x Pack of 25)

Rycote's Stickies Advanced are improved, super-sticky, double-sided, hypoallergenic adhesive pads.

Rycote 066322 Stickies Adv, 23mm O's (Box of 10 x Pack of 25)

Rycote's Stickies Advanced are improved, super-sticky, double-sided, hypoallergenic adhesive pads.

Rycote 065509 Stickies (25 packs x 30 pieces)

Stickies are double-sided adhesive pads, used to affix small, personal microphones directly onto the skin or on top of clothing. The pads are sandwiched with a soft fabric to prevent the mount from creaking when the mic is attached. The materials used are hypoallergenic.

Rycote 214123 Stereo Duck Raincover AG

Protect your Modular Windshield Kit from the bad weather with the Rycote Duck Rain Cover! Now also available in a Stereo format, the Rycote Duck is the indispensible accessory to record in wet weather conditions. The Duck Cover is made of open cell foam that diffuses rain droplets' sound, with a weatherproof backover spaced away from the windshield to minimise rain noise.

Rycote 214122 Stereo Duck Raincover AF

Protect your Modular Windshield Kit from the bad weather with the Rycote Duck Rain Cover! Now also available in a Stereo format, the Rycote Duck is the indispensible accessory to record in wet weather conditions. The Duck Cover is made of open cell foam that diffuses rain droplets' sound, with a weatherproof backover spaced away from the windshield to minimise rain noise.

Rycote 214121 Stereo Duck Raincover AE

Protect your Modular Windshield Kit from the bad weather with the Rycote Duck Rain Cover! Now also available in a Stereo format, the Rycote Duck is the indispensible accessory to record in wet weather conditions. The Duck Cover is made of open cell foam that diffuses rain droplets' sound, with a weatherproof backover spaced away from the windshield to minimise rain noise.

Rycote 214120 Stereo Duck Raincover AD

Protect your Modular Windshield Kit from the bad weather with the Rycote Duck Rain Cover! Now also available in a Stereo format, the Rycote Duck is the indispensible accessory to record in wet weather conditions. The Duck Cover is made of open cell foam that diffuses rain droplets' sound, with a weatherproof backover spaced away from the windshield to minimise rain noise.

Rycote 016927 Connbox CB12 (2 LEMO Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE). An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings. Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble. The Connbox is made of the highest quality components, using a Gold 5-pin Neutrik X-series XLR connector, and an ultra soft Mogami star-quad cable. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE).

Rycote 016908 Connbox CB8 (LEMO/XLR-3F Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB8 is suitable for Schoeps CMIT-5u + CCM M/S stereo pair. An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings. Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble. The Connbox is made of the highest quality components, using a Gold 5-pin Neutrik X-series XLR connector, and an ultra soft Mogami star-quad cable. Connbox 6 is suitable for a M/S stereo pair of Schoeps CCM in a mono extended ballgag with Lemo connectors

Rycote 016907 Connbox CB7 (2LEMO Long Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 7 is suitable for a M/S stereo pair of Schoeps CCM in a AC MS Stereo Windshield Kit with Lemo connectors. The Lemo tails are detachable from the Connbox 7 and longer than those on the Connbox 6. An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings. Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble. The Connbox is made of the highest quality components, using a Gold 5-pin Neutrik X-series XLR connector, and an ultra soft Mogami star-quad cable.  

Rycote 016905 Connbox CB5 (LEMO Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 5 is suitable for single Schoeps CCM in a WS 9 Kit with Lemo connector. The Lemo tail is detachable from the Connbox. An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings.   Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble.   The Connbox is made of the highest quality components, using Gold 3-pin Neutrik X-series XLR connectors, and an ultra soft Mogami star-quad cable.  

Rycote 021906 Windjammer WJ AG

Windjammer suitable for the Modular Stereo Windshield SWS AG/300 MS Kit The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.   Each Windjammer fits one size of windshield, and comes supplied in every Modular Windshield Kit. Windjammer® is also available in sizes to fit Stereo Windshields, Softies & Baby Ballgags, please see their relevant product family for details.   The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency. To be totally effective it is important that the pile of the Windjammer® remains in prime condition, so each is supplied with a fold flat hairbrush for ongoing maintenance. Click here for care instructions.   Standard Windjammer is fitted with a drawstring and toggle to allow snug and easy fitting, however some users prefer the zipped version which are available on request.  

Rycote 021901 Windjammer WJ AE

021901 Windjammer WJ AE The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.   Each Windjammer fits one size of windshield, and comes supplied in every Modular Windshield Kit. Windjammer® is also available in sizes to fit Stereo Windshields, Softies & Baby Ballgags, please see their relevant product family for details.   The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency. To be totally effective it is important that the pile of the Windjammer® remains in prime condition, so each is supplied with a fold flat hairbrush for ongoing maintenance. Click here for care instructions.   Standard Windjammer is fitted with a drawstring and toggle to allow snug and easy fitting, however some users prefer the zipped version which are available on request.  

Rycote 040245 Suspension Medium MS 72 Duo

Suitable for a pair of microphones of 19-25mm no longer than 250mm in MS stereo configuration in an AG Stereo Windshield. Stereo suspensions are available to fit a wide variety of stereo pairs, single shank stereo microphones, and stereo capsule microphones.   The Full Windshield Kit is now also available for Stereo pairs. This complete modular system can be configured to allow almost any stereo pairs, single shank stereo microphones, and stereo capsule microphones to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.   Benefitting from the patented Lyre technology already in use with all our mono suspensions, the new stereo suspensions present an array of advantages over the previous "hoop & band" suspensions. They are be more robust, easier to set up, less prone to shock-vibrations, lighter, and more versatile.   The Universal Back-to-Back clips are designed to accommodate any microphone from 19 to 25mm in diameter and therefore make it easier to determine the right set-up for a particular Stereo Pair of microphones.   Suspensions with 30mm clips on a riser are also available for single stereo microphones. Please note that Connboxes are not included with the Stereo suspensions, but are available separately to suit all types of microphone combinations to reduce handling noise.  

Rycote 040240 Suspension Medium Single Shank

Suspension Medium Single Shank is suitable for large stereo mics in an AF Stereo Windshield such as the Pearl MSH range and Neumann RSM 191. Stereo suspensions are available to fit a wide variety of stereo pairs, single shank stereo microphones, and stereo capsule microphones.   The Full Windshield Kit is now also available for Stereo pairs. This complete modular system can be configured to allow almost any stereo pairs, single shank stereo microphones, and stereo capsule microphones to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.   Benefitting from the patented Lyre technology already in use with all our mono suspensions, the new stereo suspensions present an array of advantages over the previous "hoop & band" suspensions. They are be more robust, easier to set up, less prone to shock-vibrations, lighter, and more versatile.   The Universal Back-to-Back clips are designed to accommodate any microphone from 19 to 25mm in diameter and therefore make it easier to determine the right set-up for a particular Stereo Pair of microphones.   Suspensions with 30mm clips on a riser are also available for single stereo microphones. Please note that Connboxes are not included with the Stereo suspensions, but are available separately to suit all types of microphone combinations to reduce handling noise.  

Rycote 040253 Suspension Medium Single Shank Heavy

Suspension Medium Single Shank is suitable for large stereo mics in an AF Stereo Kit. Our suspensions provide complete isolation against handling and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs. The Modular suspension is designed to allow microphones to be completely enclosed by either the standard diameter modular windshield or the larger diameter stereo windshield.

Rycote 040243 Suspension Small MS

Suitable for a pair of microphones of 19-25mm no longer than 90mm in MS stereo configuration in an AD Stereo Windshield.   Stereo suspensions are available to fit a wide variety of stereo pairs, single shank stereo microphones, and stereo capsule microphones.   The Full Windshield Kit is now also available for Stereo pairs. This complete modular system can be configured to allow almost any stereo pairs, single shank stereo microphones, and stereo capsule microphones to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.   Benefitting from the patented Lyre technology already in use with all our mono suspensions, the new stereo suspensions present an array of advantages over the previous "hoop & band" suspensions. They are be more robust, easier to set up, less prone to shock-vibrations, lighter, and more versatile.   The Universal Back-to-Back clips are designed to accommodate any microphone from 19 to 25mm in diameter and therefore make it easier to determine the right set-up for a particular Stereo Pair of microphones.   Suspensions with 30mm clips on a riser are also available for single stereo microphones. Please note that Connboxes are not included with the Stereo suspensions, but are available separately to suit all types of microphone combinations to reduce handling noise.