Rycote 048473 Replacement X Small Modular Bar

This Rycote Replacement X Small Modular Bar is used to extend the length of the Rycote Modular Suspensions system to accommodate larger microphones.

Rycote 107317 20 x Single Triangular White Mic Flag

Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter. Fits A Wide Range Of Microphones With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag. Lightweight But Tough Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm. If you want your branding seen on screen, use Rycote’s Mic Flags!

Rycote 107316 20 x Single Square White Mic Flag

Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter. Fits A Wide Range Of Microphones With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag. Lightweight But Tough Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm. If you want your branding seen on screen, use Rycote’s Mic Flags!

Rycote 066322 Stickies Adv, 23mm O's (Box of 10 x Pack of 25)

Rycote's Stickies Advanced are improved, super-sticky, double-sided, hypoallergenic adhesive pads.

Rycote 065509 Stickies (25 packs x 30 pieces)

Stickies are double-sided adhesive pads, used to affix small, personal microphones directly onto the skin or on top of clothing. The pads are sandwiched with a soft fabric to prevent the mount from creaking when the mic is attached. The materials used are hypoallergenic.

Rycote 021906 Windjammer WJ AG

Windjammer suitable for the Modular Stereo Windshield SWS AG/300 MS Kit The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.   Each Windjammer fits one size of windshield, and comes supplied in every Modular Windshield Kit. Windjammer® is also available in sizes to fit Stereo Windshields, Softies & Baby Ballgags, please see their relevant product family for details.   The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency. To be totally effective it is important that the pile of the Windjammer® remains in prime condition, so each is supplied with a fold flat hairbrush for ongoing maintenance. Click here for care instructions.   Standard Windjammer is fitted with a drawstring and toggle to allow snug and easy fitting, however some users prefer the zipped version which are available on request.  

Rycote 021901 Windjammer WJ AE

021901 Windjammer WJ AE The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.   Each Windjammer fits one size of windshield, and comes supplied in every Modular Windshield Kit. Windjammer® is also available in sizes to fit Stereo Windshields, Softies & Baby Ballgags, please see their relevant product family for details.   The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency. To be totally effective it is important that the pile of the Windjammer® remains in prime condition, so each is supplied with a fold flat hairbrush for ongoing maintenance. Click here for care instructions.   Standard Windjammer is fitted with a drawstring and toggle to allow snug and easy fitting, however some users prefer the zipped version which are available on request.  

Rycote 040245 Suspension Medium MS 72 Duo

Suitable for a pair of microphones of 19-25mm no longer than 250mm in MS stereo configuration in an AG Stereo Windshield. Stereo suspensions are available to fit a wide variety of stereo pairs, single shank stereo microphones, and stereo capsule microphones.   The Full Windshield Kit is now also available for Stereo pairs. This complete modular system can be configured to allow almost any stereo pairs, single shank stereo microphones, and stereo capsule microphones to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.   Benefitting from the patented Lyre technology already in use with all our mono suspensions, the new stereo suspensions present an array of advantages over the previous "hoop & band" suspensions. They are be more robust, easier to set up, less prone to shock-vibrations, lighter, and more versatile.   The Universal Back-to-Back clips are designed to accommodate any microphone from 19 to 25mm in diameter and therefore make it easier to determine the right set-up for a particular Stereo Pair of microphones.   Suspensions with 30mm clips on a riser are also available for single stereo microphones. Please note that Connboxes are not included with the Stereo suspensions, but are available separately to suit all types of microphone combinations to reduce handling noise.  

Rycote 040240 Suspension Medium Single Shank

Suspension Medium Single Shank is suitable for large stereo mics in an AF Stereo Windshield such as the Pearl MSH range and Neumann RSM 191. Stereo suspensions are available to fit a wide variety of stereo pairs, single shank stereo microphones, and stereo capsule microphones.   The Full Windshield Kit is now also available for Stereo pairs. This complete modular system can be configured to allow almost any stereo pairs, single shank stereo microphones, and stereo capsule microphones to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.   Benefitting from the patented Lyre technology already in use with all our mono suspensions, the new stereo suspensions present an array of advantages over the previous "hoop & band" suspensions. They are be more robust, easier to set up, less prone to shock-vibrations, lighter, and more versatile.   The Universal Back-to-Back clips are designed to accommodate any microphone from 19 to 25mm in diameter and therefore make it easier to determine the right set-up for a particular Stereo Pair of microphones.   Suspensions with 30mm clips on a riser are also available for single stereo microphones. Please note that Connboxes are not included with the Stereo suspensions, but are available separately to suit all types of microphone combinations to reduce handling noise.  

Rycote 040253 Suspension Medium Single Shank Heavy

Suspension Medium Single Shank is suitable for large stereo mics in an AF Stereo Kit. Our suspensions provide complete isolation against handling and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs. The Modular suspension is designed to allow microphones to be completely enclosed by either the standard diameter modular windshield or the larger diameter stereo windshield.

Rycote 040243 Suspension Small MS

Suitable for a pair of microphones of 19-25mm no longer than 90mm in MS stereo configuration in an AD Stereo Windshield.   Stereo suspensions are available to fit a wide variety of stereo pairs, single shank stereo microphones, and stereo capsule microphones.   The Full Windshield Kit is now also available for Stereo pairs. This complete modular system can be configured to allow almost any stereo pairs, single shank stereo microphones, and stereo capsule microphones to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.   Benefitting from the patented Lyre technology already in use with all our mono suspensions, the new stereo suspensions present an array of advantages over the previous "hoop & band" suspensions. They are be more robust, easier to set up, less prone to shock-vibrations, lighter, and more versatile.   The Universal Back-to-Back clips are designed to accommodate any microphone from 19 to 25mm in diameter and therefore make it easier to determine the right set-up for a particular Stereo Pair of microphones.   Suspensions with 30mm clips on a riser are also available for single stereo microphones. Please note that Connboxes are not included with the Stereo suspensions, but are available separately to suit all types of microphone combinations to reduce handling noise.