HedBox NINA L Mini V-Mount Battery

HedBox HEDNINAL (HED-NINAL, HED/NINAL, HED_NINAL, HED NINAL) NINA L Mini V-Mount Battery The NINA series of Hedbox stands for High Performance and High Safety Design mini Battery Pack. The new and revolutionary IDR System provides full control and display of the battery status. On the high-contrast OLED Display, the Battery Capacity, Remaining Time, Circle usage, and Charging function are visible during the day and night. Through its additional 2xD-Tap DC output the NINA can deliver power to all additional accessory devices. An extra USB-A and USB-C power input allows the charging of the battery with regular USB chargers. Also the same can be used as Power output for mobile phones, tablets, or other accessories using one single battery. USB Charging Display Upon pressing the IDR button ( Indication Display Ring) The OLED Display shows the charging process of the battery The charging readout is shown as an indication and a percentage V–Mount Connection Holder NINA L has a standard V-Mount connection. The V-Wedge is made from a special structure of high-quality dur-aluminum. This material enables safe, rugged, and reliable mounting of the battery on all products on which the battery will be used Battery Charging OLED Display During the Battery Charging process, via the USB Charger/cable, the battery OLED Display shows the real-time charging process. The readout is visibly shown in the charging indication progress and the current state of battery capacity status. The battery Capacity status is counted per one percent (1%) Two D-Tap, Power Out - USB-A and USB-C Through its additional integration on both sides D-Tap DC Power output. The NINA L battery can deliver two times 16.8V, 135W/ 8A of power. An extra USB-A power provides 5V/3A , 9V/2A , 12V/2A and another USB-C can sustain 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A (65W) Both USB outputs support PD3.0/QC2.0/QC3.0/PPS/AFC/FCP/SCP/DCP-1.5A/APPLE-2.4A. This allows the charging of mobile phones, tablets, or other accessories using one single battery Low Capacity Emergency ALARM When the battery capacity drops below 20%. The battery IDR emergency ALARM lights up. The strong and visible fleshing IDR ring, (silent mode no buzzer), warns the user that the battery has fallen below 20% capacity. This unique function gives the camera operator enough time to finish the recording and replace the battery in time USB-C LED Cable Included The cable has an LED display that in real-time shows charging power, and charging status. Built-in smart chips monitor the charging power and adjust current and voltage automatically, avoiding damage to the battery in case of an unstable current. (Please note display module just shows charging power, it neither increases nor decreases charging current)

HedBox UNIX-BM V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm Black Magic Cable

Hedbox UNIX-BM (UNIX/BM, UNIX BM, UNIX BM, HB_UNIX_BM) V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm Black Magic Cable The Hedbox Unix Cine Professional V-Mount Battery Power Plate is the right choice for video and photo professionals. Using the highest quality materials, and state of the art production, the Unix represents the top of the line Cine products. With an astonishing three D-tap 14.8V/12A DC power outs and one USB 5V/2.1A DC power out, Unix can be used as a professional V-lock adapter plate for all 14.8V V-lock professional batteries. Unix allows any professional camera or camcorder to accept V-lock batteries.

HedBox NERO-L 195Wh V-Mount Battery Pack 14.8V with D-Tap & USB Output

Hedbox NERO-L (NERO/L, NERO L, NERO_L, HB-NERO-L) 195Wh V-Mount Battery Pack 14.8V with D-Tap & USB Output Run your V-mount camera or pro video accessory on the NERO L 14.8V, 195Wh Li-Ion V-Mount Battery from Hedbox. Offering 14.8V power via its V-mount connection, this battery has a capacity of 13,400mAh and supports high-current draws up to 13A. An integrated D-Tap port allows you to run accessories directly from the battery, and a USB interface allows you to charge your smartphone and other electronic devices while shooting. A four-LED gauge provides visual indication of remaining battery power at the press of a button. Integrated Cells Framing Construction System provides extra security and stability to the inner battery cells D-Tap DC output delivers power to professional devices USB power output for charging of mobile phones, tablets, and other accessories Dust-protection cover on USB and D-Tap ports Built-in four-LED power meter displays remaining battery percentage at the press of a button (100, 75, 50, or 25%) Standard lightweight aluminum-alloy V-mount for safe and reliable mounting Charges in approximately 360 minutes with separately available RP-DC100V charger

HedBox NERO-M 150Wh V-Mount Battery Pack 14.8V with D-Tap & USB Output

Hedbox NERO-M (NERO/M, NERO M, NERO_M, nero-m) 150Wh V-Mount Battery Pack 14.8V with D-Tap & USB Output Run your V-mount camera or pro video accessory on the NERO M 14.8V, 150Wh Li-Ion V-Mount Battery from Hedbox. Offering 14.8V power via its V-mount connection, this battery has a capacity of 10,400mAh and supports high-current draws up to 13A. An integrated D-Tap port allows you to run accessories directly from the battery, and a USB interface allows you to charge your smartphone and other electronic devices while shooting. A four-LED gauge provides visual indication of remaining battery power at the press of a button. Integrated Cells Framing Construction System provides extra security and stability to the inner battery cells D-Tap DC output delivers power to professional devices USB power output for charging of mobile phones, tablets, and other accessories Dust-protection cover on USB and D-Tap ports Built-in four-LED power meter displays remaining battery percentage at the press of a button (100, 75, 50, or 25%) Standard lightweight aluminum-alloy V-mount for safe and reliable mounting Charges in approximately 300 minutes with separately available RP-DC100V charger

HedBox NERO-S Lithium Ion V-Lock battery with 98.85 Wh

HedBox NERO-S (NEROS, NERO/S, NERO S, NERO_S) Lithium Ion V-Lock battery with 98.85 Wh  The new NERO series of Hedbox stands for High Performance and High Safety Design. The new and revolutionary Cells Framing Construction System provides extra security and stability to the inner battery cells. Compared to all the other Battery Brands this new advance system not only makes the NERO batteries much safer for daily professional use but also for transportation. NERO S represents the smallest cine V-lock Battery in the NERO family range. Through it’s additional D-Tap DC output the NERO S can deliver power to all professional devices. An extra USB power output allows the charging of mobile phones, tablets or other accessories using one single battery

HedBox UNIX-1B4 V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm 4-pin FGK.1B.304 cable

HedBox UNIX-1B4 (UN-IX-1B4, UN/IX-1B4, UNIX/1B4, UNIX 1B4) V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm 4-pin FGK.1B.304 cable UNIX Professional Cine Battery V-Mount Plate enables the use of V-Lock battery packs on cameras and/or numerous professional peripherals simultaneously. Featuring a high-quality aluminium v-lock release, Hedbox UNIX plates are designed and tested for up to 10,000 battery cycles. Three (3) D-Tap DC Power Outputs provide 14.8V for extra devices and peripherals such as on-board recorders, LED lights, monitors, remote follow focus, wireless transmitters etc. A built-in USB 5V 2.1A Power Output is located on the top of the UNIX plate.  Designed with versatility in mind UNIX plates have multiple mounting holes to provide universal camera connection or peripheral mounting – 4x M3x12 screws are included with UNIX to mount the plate as required.  The UNIX-1B4 includes a hard-wired 50cm power cable with a 4-Pin Push Pull FGK.1B.304 (Male) Connector that can be used to power various cameras and other professional photo/video devices that accept this connector.   UNIX Professional Cine Battery V-Mount Plate enables the use of V-Lock battery packs on cameras and/or numerous professional peripherals simultaneously. Featuring a high-quality aluminium v-lock release, Hedbox UNIX plates are designed and tested for up to 10,000 battery cycles. Three (3) D-Tap DC Power Outputs provide 14.8V for extra devices and peripherals such as on-board recorders, LED lights, monitors, remote follow focus, wireless transmitters etc. A built-in USB 5V 2.1A Power Output is located on the top of the UNIX plate.  Designed with versatility in mind UNIX plates have multiple mounting holes to provide universal camera connection or peripheral mounting – 4x M3x12 screws are included with UNIX to mount the plate as required.  The UNIX-0B includes a hard-wired 50cm power cable with a 2-Pin Push Pull FGG.0B.302 (Male) Right-Angled Connector that can be used to power various cameras and other professional photo/video devices that accept this connector input.

HedBox UNIX-0BL V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm 2-pin FGG.0B.302 cable (RA)

HedBox UNIX-0BL (UNIX0BL, UNIX/0BL, UNIX0BL, UN-IX-0BL) V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm 2-pin FGG.0B.302 cable (RA) UNIX Professional Cine Battery V-Mount Plate enables the use of V-Lock battery packs on cameras and/or numerous professional peripherals simultaneously. Featuring a high-quality aluminium v-lock release, Hedbox UNIX plates are designed and tested for up to 10,000 battery cycles. Three (3) D-Tap DC Power Outputs provide 14.8V for extra devices and peripherals such as on-board recorders, LED lights, monitors, remote follow focus, wireless transmitters etc. A built-in USB 5V 2.1A Power Output is located on the top of the UNIX plate.  Designed with versatility in mind UNIX plates have multiple mounting holes to provide universal camera connection or peripheral mounting – 4x M3x12 screws are included with UNIX to mount the plate as required.  The UNIX-0BL includes a hard-wired 50cm power cable with a 2-Pin Push Pull FGG.0B.302 (Male) Right-Angled Connector that can be used to power various cameras and other professional photo/video devices that accept this connector.   UNIX Professional Cine Battery V-Mount Plate enables the use of V-Lock battery packs on cameras and/or numerous professional peripherals simultaneously. Featuring a high-quality aluminium v-lock release, Hedbox UNIX plates are designed and tested for up to 10,000 battery cycles. Three (3) D-Tap DC Power Outputs provide 14.8V for extra devices and peripherals such as on-board recorders, LED lights, monitors, remote follow focus, wireless transmitters etc. A built-in USB 5V 2.1A Power Output is located on the top of the UNIX plate.  Designed with versatility in mind UNIX plates have multiple mounting holes to provide universal camera connection or peripheral mounting – 4x M3x12 screws are included with UNIX to mount the plate as required.  The UNIX-0B includes a hard-wired 50cm power cable with a 2-Pin Push Pull FGG.0B.302 (Male) Right-Angled Connector that can be used to power various cameras and other professional photo/video devices that accept this connector input.

HedBox UNIX-0B V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm 2-Pin FGG.0B.302 cable

HedBox UNIX-0B (UNIX0B, UN-IX-0B, UNIX 0B, UNIX/0B) V-Mount Battery Plate with 3x D-Tap 1x USB 1x 50cm 2-Pin FGG.0B.302 cable UNIX Professional Cine Battery V-Mount Plate enables the use of V-Lock battery packs on cameras and/or numerous professional peripherals simultaneously. Featuring a high-quality aluminium v-lock release, Hedbox UNIX plates are designed and tested for up to 10,000 battery cycles. Three (3) D-Tap DC Power Outputs provide 14.8V for extra devices and peripherals such as on-board recorders, LED lights, monitors, remote follow focus, wireless transmitters etc. A built-in USB 5V 2.1A Power Output is located on the top of the UNIX plate.  Designed with versatility in mind UNIX plates have multiple mounting holes to provide universal camera connection or peripheral mounting – 4x M3x12 screws are included with UNIX to mount the plate as required.  The UNIX-0B includes a hard-wired 50cm power cable with a 2-Pin Push Pull FGG.0B.302 (Male) Connector that can be used to power various cameras and other professional photo/video devices that accept this connector.   UNIX Professional Cine Battery V-Mount Plate enables the use of V-Lock battery packs on cameras and/or numerous professional peripherals simultaneously. Featuring a high-quality aluminium v-lock release, Hedbox UNIX plates are designed and tested for up to 10,000 battery cycles. Three (3) D-Tap DC Power Outputs provide 14.8V for extra devices and peripherals such as on-board recorders, LED lights, monitors, remote follow focus, wireless transmitters etc. A built-in USB 5V 2.1A Power Output is located on the top of the UNIX plate.  Designed with versatility in mind UNIX plates have multiple mounting holes to provide universal camera connection or peripheral mounting – 4x M3x12 screws are included with UNIX to mount the plate as required.  The UNIX-0B includes a hard-wired 50cm power cable with a 2-Pin Push Pull FGG.0B.302 (Male) Connector that can be used to power various cameras and other professional photo/video devices that accept this connector input.

HedBox RP-DLPE17 Battery Charger Plate for Canon LP-E17 for RP-DC50/40/30

HedBox RP-DLPE17 (RP_DLPE17, RP DLPE17, RPDLPE17, RP/DLPE17) (LP/E17, LP E17, LPE17) Battery Charger Plate for Canon LP-E17 for RP-DC50/40/30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of Canon LP-E17 type batteries.

HedBox RP-DLI109 Battery Charger Plate for PENTAX D-LI109 for RP-DC50/40/30

HedBox RP-DLI109 (RP_DLI109, RPDLI109, RP DLI109 , RP/DLI109) (DLI109, D/LI109, D LI109) Battery Charger Plate for PENTAX D-LI109 for RP-DC50/40/30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of PENTAX D-Li109 type batteries.

HedBox RP-DJC70 DV Battery Charger Plate

HedBox RP-DJC70 (RP/DJC70, RPDJC70, RP_DJC70, rp-djc70) DV Battery Charger Plate This DV Charger Plate is designed for use only with the Hedbox RP-DC50, RP-DC40 and RP-DC30 Professional DV Battery Chargers. It is designed to be used with standard HEDBOX RP-JC70 , JVC SSL-JVC50 battery mount type.

HedBox RP-DBLF19 Battery Charger Plate for Panasonic DMW-BLF19 for RP-DC50/40/30

HedBox RP-DBLF19 (RP_DBLF19 , RPDBLF19 , RP DBLF19, RP/DBLF19)(DMWBLF19, DMW/BLF19, DMW BLF19, DMW_BLF19) Battery Charger Plate for Panasonic DMW-BLF19 for RP-DC50/40/30     This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of Panasonic DMW-BLF19, BLF19E and BLF19PP type batteries. 

HedBox RP-DLPE6 Battery Charger Plate for Canon LP-E6 for RP-DC50/40/30

HedBox RP-DLPE6 (RPDLPE6, RP DLPE6, RP/DLPE6, rp-dlpe6) (LP/E6, LPE6, LP E6) Battery Charger Plate for Canon LP-E6 for RP-DC50/40/30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of common Canon LP-E6 type batteries including the Hedbox RP-LPE6 14.8Wh 2000mAh battery.

HedBox RP-DD54 Battery Charger Plate for Panasonic CGR-D08/D16S/D28S/D54S for RP-DC50/40/30

HedBox RP-DD54 (RP/DD54, RP DD54, RP_DD54, rp-dd54) (CGRD08/D16S/D28S/D54S, CGR D08/D16S/D28S/D54S, CGR/D08/D16S/D28S/D54S) Battery Charger Plate for Panasonic CGR-D08/D16S/D28S/D54S for RP-DC50/40/30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of Panasonic CGR-D08, D16S, D28S and D54S type batteries including Hedbox RP-PD54S, RP-VBD78 and RP-PD56L batteries.

HedBox RP-DBP975 Battery Charger Plate for Canon BP-970/975 for RP-DC50/40/DC30

HedBox RP-DBP975 (RP/DBP975, RP DBP975, RP_DBP975, rp-dbp975) (BP 970/975, BP970/975, BP/970/975) Battery Charger Plate for Canon BP-970/975 for RP-DC50/40/DC30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of Canon BP-970 and BP-975 type batteries including Hedbox RP-BP975 and RP-BP970 batteries.

HedBox RP-DNB2L Battery Charger Plate for Canon NB-2L for RP-DC50/40/30

HedBox RP-DNB2L (RP-DNB2L, RP-DNB2L, RP-DNB2L, rp-dnb2l) (NB-2L, NB-2L, NB-2L) Battery Charger Plate for Canon NB-2L for RP-DC50/40/30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of Canon NB-2L type batteries.

HedBox RP-DBPU Interchangeable Plate for DC30, DC40 and DC50

HedBox (RP-DBPU, RP DBPU , RP/DBPU , RPDBPU) (DC/30, DC-30, DC 30) (DC40, DC40, DC40) (DC/50, DC-50, DC 50)  Interchangeable Plate for  DC30, DC40 and DC50 chargers.  This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of SONY BP-U type batteries including the popular Hedbox HED-BP95D and HEDBP75D batteries.

HedBox RP-DFW50 Interchangeable Plate for RP-DC50 and DC40 and DC30

HedBox RP-DFW50 (RP/DFW50, RP DFW50, RP_DFW50, rp-dfw50) (RP/DC50, RP DC50, RPDC50)(DC-40, DC/40, DC 40)(DC 30, DC/30, DC 30) Interchangeable Plate for RP-DC50 and DC40 and DC30 This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of SONY FW50 type batteries including the Hedbox HED-FW50 battery.

HedBox RP-DFM50 Battery Charger Plate for SONY NP-F Series (RP-DC50/40/30)

HedBox RP-DFM50 (RPDFM50, RP/DFM50, RP DFM50, RP-DFM-50) (RPDC50/40/30, RP DC50/40/30) Battery Charger Plate for SONY NP-F Series (RP-DC50/40/30) This is an interchangeable battery plate for Hedbox DC50, DC40 and DC30 battery chargers that supports the use of common SONY NP-F type and L-Series batteries including Hedbox RP-NPF550, RP-770, RP-NPF970 and RP-NPF1000 batteries.

HedBox RPC-4X Adaptor Power Cable (4-pin XLR) 16.8V/5A for RP-DC80

HedBox RPC-4X (RPC/4X, RPC 4X, RPC_4X, rpc-4x) (RPDC80,  RP/DC80, RP DC80) Adaptor Power Cable (4-pin XLR) 16.8V/5A for RP-DC80 Hedbox RPC-4X is an inter-connecting cable for use with the Hedbox RP-DC80 Intelligent Power Device. This cable provides a 4-pin XLR Female connector for connecting compatible cameras and devices for the provision of constant power from the DC80.

HedBox RPC-SO Adaptor Power Cable (SONY C-PIN) 12.5V/5A for RP-DC80

HedBox RPC-SO (RPC/SO, RPC SO, RPC_SO, rpc-so) (RPDC80, RP/DC80, RP DC80) Adaptor Power Cable (SONY C-PIN) 12.5V/5A for RP-DC80 Hedbox RPC-SO is an inter-connecting cable for use with the Hedbox RP-DC80 Intelligent Power Device. This cable provides a Sony C-PIN 5.5mm Angled Plug for connecting compatible cameras and devices for the provision of constant power from the DC80.

HedBox RP-JC70 DV Battery Pack for JVC 7800mAh Li-Ion Battery 7.4V

HedBox RP-JC70 (RP JC70 , RPJC70  , RP/JC70 , RP_JC70, rp-jc70) DV Battery Pack for JVC 7800mAh Li-Ion Battery 7.4V Hedbox JC70 DV Battery Pack provides up to 57.7Wh / 7800mAh for JVC video camcorders – including GY-HMQ10, HM600, HM650, and GY-LS300. The high-quality Lithium-Ion battery pack can provide run times of over 6hrs at full load. A built-in 4-LED power monitor level indicator provides battery status at the push of a button, while a data communication chip synchronizes with the host camera to provide exact power percentage on the host device. DC output/input is provided over a standard pole-tap 5.5/2.1mm socket enabling up to 7.4V/30W 4A power output to be provided to external peripherals or input charging of the battery. Also featured is a USB 5V 1A socket to power or charge small peripherals or devices. 

HedBox RP-VBD78 DV Battery Pack for Panasonic 7800mAh Li-Ion Battery 7.4V (VBR)

HedBox RP-VBD78 (RP/VBD78,  RP VBD78 ,  RP_VBD78 , rp-vbd78) (VB/R, VB-R, VB R) DV Battery Pack for Panasonic 7800mAh Li-Ion Battery 7.4V (VBR) Hedbox VBD78 DV Battery Pack provides up to 57Wh / 7800mAh for Panasonic cameras including the AG-DVX200, AJ-PX270, AJ-PX285, AJ-PX298 and HC-X1000 P2 HD camcorders. The high-quality Lithium-Ion battery pack can provide run times of up to 5hrs at full load. A built-in 4-LED power monitor level indicator provides battery status at the push of a button, while a data communication chip synchronizes with the host camera to provide exact power percentage on the host device.

HedBox HED-FW50 DV Battery Pack for SONY 1050mAh Li-Ion Battery 7.4V (FW50)

HedBox HED-FW50 (HEDFW50, HED/FW50, HED FW50, HED-FW-50) DV Battery Pack for SONY 1050mAh Li-Ion Battery 7.4V (FW50) Hedbox FW50 DV Battery Pack is an ultra-high capacity 8Wh 1080mAh Lithium-Ion battery designed to power Sony DSLR and mirrorless cameras, as well as third-party peripherals, that accept SONY FW style batteries. Utilising high quality cells, the stability and performance of this battery pack is unrivalled, while a built-in data communication chip ensures the display of exact battery percentage within the user interface of the host camera.

HedBox RP-NPF970 DV Battery Pack for SONY 6600mAh Li-Ion Battery 7.4V (NPF)

HedBox RP-NPF970 (RP/NPF970, RP NPF970, RPNPF970, RP-NPF-970) DV Battery Pack for SONY 6600mAh Li-Ion Battery 7.4V (NPF) Hedbox NPF970 DV Battery Pack provides up to 48.8Wh / 6600mAh for HD video camcorders and a multitude of other devices and peripherals that accept SONY NP-F 7.4V style batteries, such as LED lights or field monitors and recorders. The high-quality Lithium-Ion battery pack can provide run times on a host of typical devices of more than 6.5hrs at full load. A data communication chip synchronizes with camcorders and peripherals to display the exact power percentage on the host device.

HedBox RP-NPF550 DV Battery Pack for SONY 2200mAh Li-Ion Battery 7.4V (NPF)

HedBox RP-NPF550 (RP-NPF-550, RP NPF550, RP/NPF550, RP_NPF550) DV Battery Pack for SONY 2200mAh Li-Ion Battery 7.4V (NPF) Hedbox NPF550 DV Battery Pack provides up to 16Wh / 2200mAh for HD video camcorders and a multitude of other devices and peripherals that accept SONY NP-F 7.4V style batteries, such as LED lights or field monitors and recorders. The high-quality Lithium-Ion battery pack can provide run times on a host of typical devices of more than 2.2hrs at full load. A data communication chip synchronizes with camcorders and peripherals to display the exact power percentage on the host device.

HedBox HED-BP75D Lithium Battery Pack with 4-LED Power Monitor

HedBox HED-BP75D (HEDBP75D, HED/BP75D, HED BP75D, HE-DB-P7-5D) Lithium Battery Pack with 4-LED Power Monitor Hedbox BP75D Professional Battery Pack provides up to 75Wh / 5200mAh for SONY PXW and PMW cameras using BP U-Series batteries. Designed for professional filmmakers and camera operators the BP95D provides long run times (approximately 5.5hrs) in a light-weight form while offering external power outputs through a USB 5V/1A socket and Dual D-Tap sockets capable of delivering 14.4V 75W/8A to all professional external devices such as monitor/recorders and light panels.

HedBox HED-BP95D Pro Battery Pack for SONY 6700mAh Li-Ion Battery with 2x D-Tap 14.4V & USB 5V

HedBox HED-BP95D (HED BP95D, HED/BP95D, HEDBP95D, HE-DB-P9-5D) Pro Battery Pack for SONY 6700mAh Li-Ion Battery with 2x D-Tap 14.4V & USB 5V (BPU) Hedbox BP95D Professional Battery Pack provides up to 95Wh / 6,700mAh for SONY PXW and PMW cameras using BP U-Series batteries. Designed for professional filmmakers and camera operators the BP95D provides exceptionally long run times (approximately 7hrs) in a light-weight form while offering external power outputs through a USB 5V/1A socket and Dual D-Tap sockets capable of delivering 14.4V 95W/8A to all professional external devices such as monitor/recorders and light panels.

HedBox RP-CAHDBT-401 RP-DC20/DC10 Battery Charger Plate

HedBox RP-CAHDBT-401 (RP/CAHDBT/401, RP CAHDBT 401, RP-CAHDBT/401, rp-cahdbt-401) RP-DC20/DC10 Battery Charger Plate GoPro: AHDBT-401

HedBox RP-CNP-W126 Battery Charger Plate

HedBox RP-CNP-W126 (RP/CNP/W126, RP CNP W126, RP-CNP/W126, rp-cnp-w126) Battery Charger Plate This Battery Plate is designed to use only with HedBox Digital Dual Battery Charger models RP-DC20 and RP-DC10. This Economic Option allows you to Charge many different Batteries types, all with one Charger. Acording to the model plate Digital Dual Charger Automatically set Charging Voltage and the Charging Current for the designed Battery Pack. This leave no space for charging error! This plate can be used on Battery Pack Model: - Fujifilm: NP-W126

HedBox RP-CAHDBT-201 Battery Charger Plate for GoPro HERO 3 and HERO3+

HedBox RP-CAHDBT-201 (RP-CAHDBT/201, RP/CAHDBT/201, RP CAHDBT 201, rp-cahdbt-201) Battery Charger Plate for GoPro HERO 3 and HERO3+ Plate for Gopro This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Gopro - AHDBT-002, AHDBT-301, AHDBT-302

HedBox RP-CAHDBT-001 Battery Charger Plate for GoPro AHDBT-001

HedBox RP-CAHDBT-001 (RP-CAHDBT/001, RP/CAHDBT/001, RP_CAHDBT_001, rp-cahdbt-100) Battery Charger Plate for GoPro AHDBT-001 Plate for Gopro This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Gopro - AHDBT-001

HedBox RP-CVF808 Battery Charger Plate

HedBox RP-CVF808 (RP/CVF808, RP CVF808, RP_CVF808, rp-cvf808) Battery Charger Plate This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:   JVC - BN-VF808 ; BN-VF815 ; BN-VF823

HedBox RP-CEL20 Battery Charger Plate for Nikon EN-EL20

HedBox RP-CEL20 (RP/CEL20, RP CEL20, RP CEL20, RP_CEL20, rp-cel20) Battery Charger Plate for Nikon EN-EL20 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Nikon - EN-EL20

HedBox RP-CEL15 Battery Charger Plate for Nikon EN-EL15

HedBox RP-CEL15 (RP/CEL15, RP CEL15, RPCEL15, RP_CEL15, rp-cel15) Battery Charger Plate for Nikon EN-EL15 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Nikon - EN-EL15

HedBox RP-CEL12 Battery Charger Plate for Nikon EN-EL12

HedBox RP-CEL12 (RP/CEL12, RP CEL12, RPCEL12, RP_CEL12, rp-cel12) Battery Charger Plate for Nikon EN-EL12 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs: Nikon- EN-EL12

HedBox RP-CEL3 Battery Charger Plate for Nikon EN-EL3

HedBox RP-CEL3 ( RP/CEL3, RP CEL3, RP_CEL, RPCEL3, rp-cel3) Battery Charger Plate for Nikon EN-EL3 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Nikon - EN-EL3 ; EN-EL3E ; NP150

HedBox RP-CLP-E10 Battery Charger Plate for Canon LP-E10

HedBox RP-CLP-E10 (RP/CLP/E10, RP-CLP/E10, RP CLP E10, rp-clp-e10) Battery Charger Plate for Canon LP-E10 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  CANON - LP-E10

HedBox RP-CLP-E8 Battery Charger Plate for Canon LP-E8

HedBox RP-CLP-E8 (RP/CLP/E8, RP-CLP/E8, RP CLP E8, rp-clp-e8) Battery Charger Plate for Canon LP-E8 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Canon - LP-E8

HedBox RP-CLP-E6 Battery Charger Plate for Canon LP-E6

HedBox RP-CLP-E6 (RP-CLP/E6, RP/CLP/E6, RP CLP E6, rp-clp-e6) Battery Charger Plate for Canon LP-E6 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Canon - LP-E6  HedBox RP-LPE6 battery

HedBox RP-CF915 Battery Charger Plate for Canon F-915

HedBox RP-CF915 (RP/CF915, RP CF915, RP_CF915, rp-cf915) Battery Charger Plate for Canon F-915 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  CANON - F-915 ; F-930 ; F-945 ; BP-911 ; BP-915 ; BP-930 ; BP-930G ; BP-950G ; BP-970G ; BP-975

HedBox RP-CBP808 Battery Charger Plate for Canon BP-808

HedBox RP-CBP808 (RP/CBP808, RP CBP808, RP_CBP808, rp-cbp808) Battery Charger Plate for Canon BP-808 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  CANON - BP-808 ; BP-809 ; BP-819 ; BP-827

HedBox RP-CVBG6 Battery Charger Plate for Panasonic VW-VBG6

HedBox RP-CVBG6 (RP/CVBG6 , RP CVBG6 , RP_CVBG6, rp-cvbg6) Battery Charger Plate for Panasonic VW-VBG6 Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  PANASONIC - VW-VBG6

HedBox RP-CVBG130 Battery Charger Plate for Panasonic VW-VBG130

HedBox RP-CVBG130 (RP-CVB-G130, RP-CVB/G130, RPCVB-G130, RPCVBG130) Battery Charger Plate for Panasonic VW-VBG130. Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs: PANASONIC - VW-VBG130 ; VW-VBG130-K

HedBox RP-CD16 Battery Charger Plate for Panasonic CGR-D08

HedBox RP-CD16 (RP/CD16, RP CD16, RP_CD16, pr-cd16) Battery Charger Plate for Panasonic CGR-D08 This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs: PANASONIC - CGR-D08 ; CGR-D16 ; CGR-D28 ; CGR-D120 ; CGR-D210 ; CGR-D220 ; CGR-D320 ; CGR-D54S ; VW-VBD25 ; CGR-S602

HedBox RP-CBLF19 Battery Charger Plate for Panasonic

HedBox RP-CBLF19 (RP/CBLF19, RP CBLF19, RP_CBLF19, pr-cblf19) Battery Charger Plate for Panasonic Plate Foe Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. Use to fit Battery Pack on HedBox Battery Charger model RP-DC20 & RP-DC10 -Panasonic | DMW-BLF19 ; DMW-BLF19E ; DMW-BLF19PP This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs: Panasonic - DMW-BLF19

HedBox RP-CBLC12 Battery Charger Plate for Panasonic BL-C12, BLC12PP, BLC12E

HedBox RP-CBLC12 (RP/CBLC12 , RP CBLC12 , RP_CBLC12, rp-cblc12) Battery Charger Plate for Panasonic BL-C12, BLC12PP, BLC12E Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Panasonic - BL-C12

HedBox RP-CBCF10E Battery Charger Plate for Panasonic BC-F10E, BC-G10

HedBox RP-CBCF10E (RP/CBCF10E, RP CBCF10E, RP_CBCF10E, rp-cbcf10e) Battery Charger Plate for Panasonic BC-F10E, BC-G10. Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. With this plate you can charge next Battery Packs:  Panasonic- BC-F10E ; BC-G10

HedBox RP-CBX1 Battery Charger Plate for Sony NP-BX1

HedBox RP-CBX1 (RP/CBX1 , RP CBX1 , CBX1) Battery Charger Plate for Sony NP-BX1. Battery plate for Sony This Battery Plate is designed to use with HedBox Digital Dual Charger.  This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20.   According to the model plate Digital Dual Charger. Automatically set Charging Voltage and the Charging Current for the designed Battery Pack.  With this plate you can charge next Battery Packs: Sony - NP-BX1