Swit S-3602D 2-Channel Panasonic VW-VBD and CGA series Charger and Adaptor

Swit S-3602D (S_3602D, S/3602D, S 3602D) 2-Channel Panasonic VW-VBD and CGA series Charger and Adaptor S-3602D is a dual channel charger for SWIT S-8D98, S-8D58 and S-8D62, and compatible with Panasonic VW-VBD58, AG-VBR59 and CGA series D54, D28 DV batteries.

Swit S-8D98 Panasonic EVA1/DVX200 Camcorder Battery Pack

Swit S-8D98 (S_8D98, S/8D98, S 8D98) Panasonic EVA1/DVX200 Camcorder Battery Pack S-8D98 is the replacement battery for Panasonic VW-VBD58 or AG-VBR59, compatible with Panasonic AU-EVA1, AG-DVX200 and AJ-PX270/285, etc. 70Wh/9800mAh Capacity With 7.2V nominal voltage, the S-8D98 has 70Wh / 9800mAh capacity,and can run more than 3 hours on AU-EVA1 camcorder. Build-in Pole-tap DC Socket For DC output or Charging input A 5.5/2.1mm pole-tap DC output socket is equipped on the S-8D98 battery, for DC 7.2V (Nominate) connection. You can connect on-camera LED light, monitor or wireless transmitter on the pole-tap socket, and get power simultaneously with camera. The Max power from the pole-tap is 30W, 4A. The Pole-tap socket can also be used as charging input, by SWIT portable charger S-3010D. Build-in 5V/1A USB Socket Use S-8D98 as Power Station to your cell phone! It’s rather a fantastic function to have a USB socket on the DV battery! Connect your smart phone or pad to the USB socket, press the “Check” button, and then the S-8D98 starts to output 5V/1A power to charge your devices! 4-level LED Power Indicator The S-8D98 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. Easy Charging The S-8D98 can be charged on Panasonic original charger DE-A88, and SWIT also provides the Dual channel charger S-3602D for S-8D98, will take about 6 hours to charge from empty to 100%. And you can also use SWIT S-3010D Portable Pole-tap Charger for S-8D98. It will take 9.5 hours to fully charge.  

Swit S-8975 Sony L Series DV Camcorder Battery Pack

Swit S-8975 (S_8975, S/8975, S 8975) Sony L Series DV Camcorder Battery Pack S-8975 is the replacement battery for SONY NP-F970, compatible with SONY HVR-V1/Z1/Z7, DSR-PD190, HD1000E, etc. S-8975 can exchange digital info with the cameras, and display remaining power info on the camera viewfinder.

Swit LB-SU98 98Wh Battery type BP-U

Swit LB-SU98 (LB_SU98, LB/SU98, LB SU98) 98Wh Battery type BP-U The highest quality battery for cameras and professional equipment, for everyday work. Durability and reliability outweight . Built-in D-tap and USB sockets. The battery does not produce uncomfortably from the equipment and at the same time has a very large capacity and low weight. Communication with camera viewfinders. A whole range of chargers is available.    

Swit LB-CA50 Canon EOS-C300MK2 Battery Pack

Swit LB-CA50 (LB-CA50, LB-CA50, LB-CA50) Canon EOS-C300MK2 Battery Pack LB-CA50 is the replacement battery for Canon BP-A60 battery, power Canon EOS C300mk2 and C200 cameras via additional D-tap to camera DC-IN cable.  73Wh / 5.1Ah capacity With 14.4V nominal voltage, the LB-CA50 has 73Wh / 5.1Ah capacity and can run approx. 6 hours on Canon EOS C300mk2 camera when LCD monitor is on. D-tap to DC-IN cable The special D-tap cable PA-B2L4 is for LB-CA50 battery to power Canon EOS C300mk2 and C200 cameras. Charge via D-tap socket The LB-CA50 can only be charged via D-tap socket. SWIT provides the Dual D-tap heads 3A portable charger PC-U130B2 to charge LB-CA50 battery. It takes 3 hours and 30 minutes to charge 2 LB-CA50 batteries from 0 to 100%. Build-in 5V 1A USB socket LB-CA50 has a 5V/1A USB-A power output socket to power cell phone or other devices. Press the “Check” button to trigger on USB output and the USB output will automatically switched off if no devices detected for a period of time, to save energy. 4-level LED Power Indicator The LB-CA50 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.

Swit PC-P430A 4-Channel Gold Mount Battery Charger

Swit PC-P430A (PC_P430A, PC/P430A, PC P430A) 4-Channel Gold Mount Battery Charger PC-P430A can charge 4pcs Gold Mount camera batteries simultaneously. The charging output is DC16.8V, 3A each channel. LED Charging Indicators for Each Channel The PC-P430A has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors:Display Red: Battery is charging, capacity below 80%; Display Yellow: Battery is charging, capacity above 80%; Display Green: Charging finished.. AC-DC Adapting Output PC-P430A has 2x 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable (optional purchase), the PC-P430A can be used as AC-DC adaptor of 2-ch DC 15V, 6A, 90W simultaneous output. Please note the AC-DC adapting output will not work when battery is charging.

Swit S-3822A 2-Channel Gold Mount Charger

Swit S-3822A (S_3822A, S/3822A, S 3822A) 2-Channel Gold Mount Charger The portable charger S-3822A can charge 2 Gold mount batteries simultaneously. The charging output is DC 16.8V, 3A×2. S-3822A has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors. S-3822A has a 4-pin XLR female connector on the front panel.

Swit S-3812A 2-Channel Gold mount Fast Charger

Swit S-3812A (S_3812A, S/3812A, S 3812A) 2-Channel Gold mount Fast Charger S-3812A can charge 2 Gold mount batteries simultaneously at Max 6A fast charging current, to SWIT particular batteries. The charging speed is quite faster than normal chargers. The following battery models support 6A fast charging: D-8161A, S-8180A, S-8113A, S-8183A And for other batteries, the charging current is 3A.  

Swit PC-U130A Portable Gold Mount Battery Charger

Swit PC-U130A (PC_U130A, PC/U130A, PC U130A) Portable Gold Mount Battery Charger The PC-U130A consists of an AC-DC power module and a DC cable to connect with the pins of Gold mount batteries. The single channel charger offers DC 14-16.8V, 3A fast charging output.

Swit S-8180A 220Wh High Load Gold Mount Battery Pack

Swit S-8180A (S_8180A, S/8180A, S 8180A) 220Wh High Load Gold Mount Battery Pack Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8180A high-load battery, you can get MAX 140W/12A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output.

Swit S-8110A 146Wh Gold Mount Battery Pack

Swit S-8110A (S_8110A, S/8110A, S 8110A) 146Wh Gold Mount Battery Pack S-8110A is the AntonBauer gold mount rechargeable Li-ion battery pack for professional video cameras.

Swit S-8113A 160Wh Gold Mount Battery Pack

Swit S-8113A (S_8113A, S8113A, S/8113A) 160Wh Gold Mount Battery Pack Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8113A high-load battery, you can get MAX 150W/12A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output.

Swit S-8083A 130Wh Gold Mount Battery Pack

Swit S-8083A (S_8083A, S/8083A, S 8083A) 130Wh Gold Mount Battery Pack S-8083A is the AntonBauer gold mount rechargeable Li-ion battery pack for professional video cameras.It’s compact design, smaller in size. 130Wh / 9.2Ah Capacity Consists of 12pcs 18650 battery cells, and reaches 130Wh/9.2Ah high capacity.Run approx 4 hours for normal 30W ENG cameras. AntonBauer Gold Mount Connection S-8083A is compatible with AntonBauer Gold mount type power system and we adopt the high quality connection bolts that ensure the reliable mounting. Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8083A battery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc.

Swit PB-S220A 220Wh Multi-sockets Square Digital Battery Pack

Swit PB-S220A (PB_S220A, PB/S220A, PB S220A) 220Wh Multi-sockets Square Digital Battery Pack PB-S series camera batteries are compact designed, shorter than normal batteries, and match perfectly with most of the Cine-cameras. Consists of 24pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 220Wh / 15.3Ah high capacity. Can run approx 7 hours for normal ENG cameras and approx 2.5 hours for ARRI ALEXA.  Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, wireless system work together, and total power will be above 110W, and the normal batteries cannot draw completely. Using PB-S220A high-load battery, you can get MAX 150W/12A constant power output, which can drive more high power cameras, LCD Monitor and other equipments easily, and won’t reduce battery life during long time high power output.  PB-S220A is equipped with 4 D-tap DC output sockets, Max total load is 120W/10A, which can power other on-camera equipments together. PB-S220A is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices. PB-S220A supports 6A fast charging by SWIT S-3812 fast charger, to save more than 50% charging time. The 220Wh PB-S220A battery can be charged from 0 to 80% after 2.3 hours, and fully charged within 3.5 hours.  The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.

Swit PB-S98A 98Wh Multi-sockets Square Digital Battery

Swit PB-S98A (PB_S98A, PB/S98A, PB S98A) 98Wh Multi-sockets Square Digital Battery PB-S series camera batteries are compact designed, shorter than normal batteries, and match perfectly with most of the Cine-cameras. Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.6Ah high capacity. Can run approx 3 hours for normal ENG cameras. PB-S98A is equipped with 2 D-tap DC output sockets, which can power other on-camera equipments together. The Max output current of D-tap is 8A, 100W. PB-S98A is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices. The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.

Swit S-4030 Power Station Box (Dual 24V)

Swit S-4030 (S_4030, S/4030, S 4030) Power Station Box (Dual 24V) S-4030 power station box can install 4 pieces of V-mount batteries which can provide more power and longer power supply time comparing to single Li-ion battery. It can meet the demand of different users, and is very suitable for Cine cameras, lightings for Film & Television and mobile studios.

Swit S-4020 Power Station Box (12V/24V)

Swit S-4020 (S_4020, S/4020, S 4020) Power Station Box (12V/24V) S-4020 power station box can install 4 pieces of V-mount batteries which can provide more power and longer power supply time comparing to single Li-ion battery. It can meet the demand of different users, and is very suitable for Cine cameras, lightings for Film & Television and mobile studios.

Swit S-4010 Power Station Box (Dual 12V)

Swit S-4010 (S_4010, S/4010, S 4010) Power Station Box (Dual 12V) S-4010 power station box can install 4 pieces of V-mount batteries which can provide more power and longer power supply time comparing to single Li-ion battery. It can meet the demand of different users, and is very suitable for Cine cameras, lightings for Film & Television and mobile studios.

Swit PC-P430S 4-Channel V-Mount Battery Quick Charger

Swit PC-P430S (PC_P430S, PC/P430S, PC P430S) 4-Channel V-Mount Battery Quick Charger PC-P430S can charge 4pcs V-mount camera batteries simultaneously. The charging output is DC16.8V, 3A each channel. The PC-P430S has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors:Display Red: Battery is charging, capacity below 80%; Display Yellow: Battery is charging, capacity above 80%; Display Green: Charging finished. AC-DC Adapting Output  PC-P430S has 2x 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable (optional purchase), the PC-P430S can be used as AC-DC adaptor of 2-ch DC 15V, 6A, 90W simultaneous output. Please note the AC-DC adapting output will not work when battery is charging.

Swit S-3812S 2-ch V-mount Fast Charger

Swit S-3812S (S_3812S, S/3812S, S 3812S) 2-ch V-mount Fast Charger S-3812S can charge 2 V-mount batteries simultaneously at Max 6A fast charging current, to SWIT particular batteries. The charging speed is quite faster than normal chargers. The following battery models support 6A fast charging: PB-H290S, PB-S220S, PB-R160S, PB-R290S, S-8340S, S-8360S, D-8161S, S-8180S, S-8113S, S-8183S And for other batteries, the charging current is 3A.

Swit PC-U130B2 Portable Dual D-tap Heads Fast Charger

Swit PC-U130B2 (PC_U130B2, PC/U130B2, PC U130B2) Portable Dual D-tap Heads Fast Charger The PC-U130B2 consists of an AC-DC power module and a dual heads D-tap DC cable to connect with the D-tap socket of batteries. So you can charge 2 batteries together. The charger offers DC 14-16.8V, 3A fast charging output in total.

Swit PC-U130B Portable D-tap Socket Fast Charger

Swit PC-U130B (PC_U130B, PC/U130B, PC U130B) Portable D-tap Socket Fast Charger The PC-U130B consists of an AC-DC power module and a D-tap DC cable to connect with the D-tap socket of batteries. The single channel charger offers DC 14-16.8V, 3A fast charging output. The PC-U130B has an LED charging indicator. It’s red during charging, and turn to green when charging finished. 

Swit PC-U130S Portable Charger for V-Mount Battery

Swit PC-U130S (PC_U130S, PC/U130S, PC U130S) Portable Charger for V-Mount Battery The PC-U130S consists of an AC-DC power module and a DC cable to connect with the pins of V-mount batteries. The single channel charger offers DC 14-16.8V, 3A fast charging output. The PC-U130S has an LED charging indicator. It's red during charging, and turn to green when charging finished. 

Swit S-8180S 220Wh High Load V-mount Battery

Swit S-8180S (S_8180S, S/8180S, S 8180S) 220Wh High Load V-mount Battery Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8180S high-load battery, you can get MAX 140W/12A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output.

Swit KA-M20S Dual Pocket V-mount Batteries Hot Swap Plate

Swit KA-M20S (KA_M20S, KA/M20S, KA M20S) Dual Pocket V-mount Batteries Hot Swap Plate KA-M20S is an extender plate for SWIT Pocket V-mount Batteries. Installed with 2x PB-M series batteries, the size is equivalent to a standard large capacity V-mount battery, and the KA-M20S plate can draw the 2 batteries one-by-one as hot swap mode, or use together as high load mode.

Swit PB-M98S 98Wh Pocket V-mount Battery

Swit PB-M98S (PB_M98S, PB/M98S, PB M98S) 98Wh Pocket V-mount Battery The brick size V-mount batteries are always too big and heavy for field shootings, especially the handheld stabilizers, focus puller monitor, portable LED panel, or small cameras. PB-M98S Pocket V-mount battery is designed for the above applications! It’s only a DV battery size, with high capacity cells and still reaches 98Wh, and without any compromise on the DC sockets!

Swit S-8183S 240Wh High Load V-mount Battery

Swit S-8183S (S_8183S, S/8183S, S 8183S) 240Wh High Load V-mount Battery Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8183S high-load battery, you can get MAX 180W/15A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output.

Swit S-8113S 160Wh V-mount Battery

Swit S-8113S (S_8113S, S/8113S, S 8113S) 160Wh V-mount Battery Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8113S high-load battery, you can get MAX 150W/12A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output. 160Wh / 11.1Ah High Capacity Consists of 16pcs 18650 battery cells, and reaches 160Wh/11.1Ah high capacity. run approx 5 hours for normal 30W ENG cameras. 6A Fast Charging S-8113S supports 6A fast charging, to save more than 50% charging time, can be charged from 0 to 80% after 1.5 hours, and fully charged within 2.5 hours.  Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8113S battery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc.. The Max Power from D-tap is 120W, 10A. 4-level LED Power Indicator On the side of the battery, there’re 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.  

Swit S-8083S 130Wh V-mount Battery

Swit S-8083S (S_8083S, S/8083S, S 8083S) 130Wh V-mount Battery S-8083S is the V-mount rechargeable Li-ion battery pack for professional video cameras. It’s compact design, smaller in size.

Swit PB-H290S 290Wh Intelligent Bi-voltage Battery

Swit PB-H290S (PB_H290S, PB/H290S, PB H290S) 290Wh Intelligent Bi-voltage Battery The ARRI Alexa LF / 65 require on-board battery input voltage 19.5-34V only, and the normal 14.4V (11-16.8V) batteries are no longer compatible. The existing 26-28.8V high voltage batteries can power Alexa LF/65, but the high voltage with the same physical connectors will surely damage other normal cameras. A better solution is to use normal 14.4V battery with a DC boost plate, but the current between battery and V-plate will get quite high with 160W load and 14.4V voltage, and will melt the battery pins. Now you will have a great solution for Alexa LF/65: the SWIT Intelligent Bi-voltage Battery, can output both 11-16.8V normal voltage and 22-33.6V high voltage, with auto recognition and switching by the dedicated V-mount plate, compatible with Alexa LF/65 and all other normal cameras and devices, with no risk of misusing.

Swit PB-S220S 14.4V 220Wh Multi D-Tap Heavy-Duty Digital Battery (V-Mount)

Swit PB-S220S (PB_S220S, PB/S220S, PB S220S) 14.4V 220Wh Multi D-Tap Heavy-Duty Digital Battery (V-Mount) The SWIT PB-S220S 14.4V 220Wh Multi D-Tap Heavy-Duty Digital Battery, featuring a V-mount, has a short, square-shaped design and provides up to 150W/12A continuous output. This makes it suitable for up to the most demanding cine-cameras along with monitors and other accessories. With 220 watt hours, the PB-S220S delivers approximately 2.5 hours of power to the ARRI ALEXA and 7 hours to ENG cameras. In addition to this, it offers four D-Tap outputs — meaning you won't need splitters if you have multiple accessories to power — and a USB port for charging mobile devices. The battery has an intelligent LCD that displays remaining runtime in minutes when the battery is in use and as a percentage value when not in use or when charging. When remaining runtime is less than 15 minutes, the LCD will flash as a warning. It'll also show a warning signal with a specific warning code if the battery detects over-discharging, over-charging, circuit issues, and the like. A long press of the power-check button will display the battery's cycle times on the LCD. The PB-S220S also communicates runtime info to RED and Sony viewfinders. This battery also supports fast charging at 6A using the optional SWIT S-3812S charger, which charges 0 to 80% of the battery in 2.3 hours and provides a full charge in 3.5 hours.

Swit PB-S98S 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery (V-Mount)

Swit PB-S98S (PB_S98S, PB/S98S, PB S98S) 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery (V-Mount) The SWIT PB-S98S 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery, featuring a V-mount, has a short, compact design and provides up to 100W/8A continuous output. While it's suitable for most cameras and devices and it can power an ENG camera for approximately 3 hours, its small size also makes it ideal for drones and other mobile applications. In addition to this, the PB-S98S offers two D-Tap outputs for powering accessories and a USB port for charging mobile devices. The battery has an intelligent LCD that displays remaining runtime in minutes when the battery is in use and as a percentage value when not in use or when charging. When remaining runtime is less than 15 minutes, the LCD will flash as a warning. It'll also show a warning signal with a specific warning code if the battery detects over-discharging, over-charging, circuit issues, and the like. A long press of the power-check button will display the battery's cycle times on the LCD. The PB-S98S also communicates runtime info to RED and Sony viewfinders.

Swit S-3822S 2-Channel V-mount Charger

Swit S-3822S (S_3822S, S/3822S, S 3822S) 2-Channel V-mount Charger The portable charger S-3822S can charge 2 V-mount batteries simultaneously. The charging output is DC 16.8V, 3A×2. 2-ch Simultaneous Charger Charging current: 3A per channel. LED Charging Indicators S-3822S has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colours: Display Red: Battery is charging, capacity below 80%; Display Yellow: Battery is charging, capacity above 80%; Display Green: Charging finished. AC-DC Adapting Output S-3822S has a 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable (optional purchase), the S-3822S can be used as AC-DC adaptor of DC 14.4V, 5A, 72W output. Please note the AC-DC adapting output will not work when battery is charging. Optimal Charging Curve Li-ion charging follows a two-period approach. The first period is constant-current. The battery is charged at the maximum charging rate. When the battery reaches a specified set-point voltage, charging circuits switch to the second period: the constant-voltage period. The charging circuit will provide only enough current to maintain the voltage, to prevent the battery from over charging. Multiple Safety Protection Design SWIT charger can identify different chemical types of batteries, and provide the correct charging program, to protect the batteries from over current, over charging, high temperature, etc.

Swit S-8073N 73Wh NP-1 Li-ion Battery

Swit S-8073N (S-8073N, S-8073-N, S-8073 N) 73Wh NP-1 Li-ion Battery S-8073N is a NP-1 type rechargeable Li-ion battery for professional video cameras and audio mixers with NP-1 battery connections. It has 73Wh / 5.1Ah high capacity, not restricted by IATA air transportation regulations. It also has a 4-level LED power indicator for giving a quick reference of remaining power of battery. S-8073N has two 14.4V D-tap DC out sockets for powering multi devices simultaneously. The built-in intelligent circuit has multiple protections in case of abnormal current, voltage or temperature. 

Swit S-8D58 Panasonic EVA1/DVX200 Camcorder Battery Pack

Swit S-8D58 (S8D58, S 8D58, S/8D58, s-8d58) Panasonic EVA1/DVX200 Camcorder Battery Pack S-8D58 is the replacement battery for Panasonic VW-VBD58 or AG-VBR59, compatible with Panasonic AU-EVA1, AG-DVX200 and AJ-PX270/285, etc. 43Wh/6000mAh Capacity With 7.2V nominal voltage, the S-8D58 has 43Wh / 6000mAh capacity, and can run more than 2 hours on AU-EVA1 camcorder. Build-in Pole-tap DC Socket A 5.5/2.1mm pole-tap DC output socket is equipped on the S-8D58 battery, for DC 7.2V (Nominate) connection. You can connect on-camera LED light, monitor or wireless transmitter on the pole-tap socket, and get power simultaneously with camera. The Max power from the pole-tap is 30W, 4A. The Pole-tap socket can also be used as charging input, by SWIT portable charger S-3010D. Build-in 5V/1A USB Socket Use S-8D58 as Power Station to your cell phone! It’s rather a fantastic function to have a USB socket on the DV battery! Connect your smart phone or pad to the USB socket, press the “Check” button, and then the S-8D58 starts to output 5V/1A power to charge your devices! 4-level LED Power Indicator The S-8D58 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. Easy Charging The S-8D58 can be charged on Panasonic original charger DE-A88, and SWIT also provides the Dual channel charger S-3602D for S-8D58, will take about 4 hours to charge from empty to 100%. And you can also use SWIT S-3010D PortablePole-tap Charger for S-8D58. It will take 7 hours to fully charge.

Swit S-8110S 146Wh V-mount Battery

Swit S-8110S (S8110S, S 8110S, S/8110S, s-8110s) 146Wh V-mount Battery S-8110S is the V-mount rechargeable Li-ion battery pack for professional video cameras.

Swit S-8152A 73+73Wh Dividable Gold Mount Battery Pack

Swit S-8152A (S-8152A, S-8152A, S-8152A) 73+73Wh Dividable Gold Mount Battery Pack The S-8152A 73 + 73Wh Split-Style Gold Mount Battery Pack from SWIT ships disassembled in two parts of 73Wh each, which can also be assembled together for a total capacity of 146Wh. The battery pack comes with a D-Tap DC output socket that supplies 100W, 8A power (maximum) to add-on accessories, such as on-camera lights, monitors, wireless transmitters, etc. It also features a four-level LED indicator that gives you a quick view of the remaining power. Its built-in intelligent circuit provides voltage, current, and temperature protection. This battery pack complies with the IATA air transportation regulations and is not restricted for air traveling.

Swit S-8152S 73+73Wh Dividable V-mount Battery Pack

Swit S-8152S (S_8152S, S/8152S, S 8152S) 73+73Wh Dividable V-mount Battery Pack The IATA DGR regulations restricted the air transportation of over 100Wh Li-ion battery packs. Since the large capacity batteries are quite necessary, SWIT provides the solution of Dividable Battery to comply with IATA regulations. S-8152S can be divided into 2 parts, and each part contains 73Wh capacity, not restricted by air transportation. And when using S-8152S, just assemble the 2 parts, you can get a Li-ion battery pack of 146Wh large capacity. 146Wh / 10.2Ah High Capacity When assembled, the S-8152S consists of 16pcs 18650 battery cells, and reaches 146Wh / 10.2Ah high capacity. S-8152S can run approx 4.5 hours for normal 30W ENG cameras, and has no problem to fly with.  Reliable V-mount Connection S-8152S is the standard SONY V-mount connection and we adopt the high quality metal V-wedge that ensures the reliable mounting. Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8152S battery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc. The Max Power from D-tap is 100W, 8A. 4-level LED Power Indicator On the side of the battery, there are 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. Adopted high quality Lithium cells Over more than 15 years, SWIT has been leading brand of broadcast camera batteries. The first reason is the high quality Lithium cells we adopted. The high quality cells featured long life, durable, safety, and most of all, the cells has very little difference to each other, which ensures the high performance of the whole battery pack. Moreover, the cells we’re using, have a smooth discharging curve by voltage, so that you can judge the remaining running time accordingly. Also when in storage, the self-discharging rates are very little, that extends the battery life effectively. Strong and Durable Housing Adopt the thicker and wider nickel slice to solder the cells, minimize the voltage drop, dissipate heating, and enhance the assembly intensity. The cells are arranged as triangular structure in the battery pack, stable and anti-shock. The cell holder inside can protect the cells pack, and separate the circuit board from the cells, to keep the boards away from internal pressure and ensure a stable working. Multiple Safety Protection Design The battery has an MCU to measure and record the real time data, and will cut off power when over-voltage, under-voltage, over-current, high-temperature of low-temperature is detected. Meanwhile, the battery housing adopts high-impact ABS material, with waist design and non-slip tread for secure handling. Cell balance adjustment After the batteries are used for a period of time, the cells voltage might get difference, and our specially designed circuit can optimise the imbalanced cells, to prolong the battery life.    

Swit S-8192S 92+92Wh Dividable V-mount Battery Pack

Swit S-8192S (S 8192 S, S8192S S/8192-S, s8192s) 92+92Wh Dividable V-mount Battery Pack Patented dividable battery design The IATA DGR regulations restricted the air transportation of over 100Wh Li-ion battery packs: Since the large capacity batteries are quite necessary, SWIT provides the solution of Dividable Battery to comply with IATA regulations. S-8192S can be divided into 2 parts, and each part contains 92Wh capacity, not restricted by air transportation. And when using S-8192S, just assemble the 2 parts, you can get a Li-ion battery pack of 184Wh large capacity. 184Wh / 12.8Ah High Capacity When assembled, the S-8192S consists of 20pcs 18650 battery cells, and reaches 184Wh / 12.8Ah high capacity.S-8192Scan run approx 6 hours for normal 30W ENG cameras, and has no problem to fly with. Reliable V-mount Connection S-8192S is the standard SONY V-mount connection and we adopt the high quality metal V-wedge that ensures the reliable mounting.  Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8192Sbattery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc. The Max Power from D-tap is 100W, 8A. 4-level LED Power Indicator On the side of the battery, there’re 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. Adopted high quality Lithium cells Over more than 15 years, SWIT has been leading brand of broadcast camera batteries. The first reason is the high quality Lithium cells we adopted. The high quality cells featured long life, durable, safety, and most of all, the cells has very little difference to each other, which ensures the high performance of the whole battery pack.Moreover, the cells we’re using, have a smooth discharging curve by voltage, so that you can judge the remaining running time accordingly. Also when in storage, the self-discharging rates are very little, that extends the battery life effectively. Strong and Durable Housing Adopt the thicker and wider nickel slice to solder the cells, minimize the voltage drop, dissipate heating, and enhance the assembly intensity. The cells are arranged as triangular structure in the battery pack, stable and anti-shock. The cell holder inside can protect the cells pack, and separate the circuit board from the cells, to keep the boards away from internal pressure and ensure a stable working. Multiple Safety Protection Design The battery has an MCU to measure and record the real time data, and will cut off power when over-voltage, under-voltage, over-current, high-temperature of low-temperature is detected.Meanwhile, the battery housing adopts high-impact ABS material, with waist design and non-slip tread for secure handling. Cell balance adjustment After the batteries are used for a period of time, the cells voltage might get difference, and our specially designed circuit can optimizethe imbalanced cells, to prolong the battery life.

Swit S-8D28 li-ion dv battery

Swit S-8D28 Panasonic Style Battery   The Swit S-8D28 is a 7.2V 22.3Wh DV battery which is comparable to the Panasonic CGP-D28.   Key Features:   ·                     Li-Ion 7.2v 22.3Wh   ·                     Panasonic CGA series battery compatible   ·                     For use with DVC30, DVX100   ·                     Dimensions: 60x36x55mm

Swit SC-302A dual channel sequential charger

Swit SC-302A (SC_302A, SC/302A, SC 302A) 2-Channel Gold Mount Battery Charger The portable charger S-3822A can charge 2 Gold mount batteries simultaneously. The charging output is DC 16.8V, 3A×2. S-3822A has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors. S-3822A has a 4-pin XLR female connector on the front panel.

Swit S-8192A 92+92Wh Dividable Gold Mount Battery Pack

Swit S-8192A (S_8192A, S/8192A, S 8192A) 92+92Wh Dividable Gold Mount Battery Pack Patented dividable battery design The IATA DGR regulations restricted the air transportation of over 100Wh Li-ion battery packs: Since the large capacity batteries are quite necessary, SWIT provides the solution of Dividable Battery to comply with IATA regulations. S-8192A can be divided into 2 parts, and each part contains 92Wh capacity, not restricted by air transportation. And when using S-8192A, just assemble the 2 parts, you can get a Li-ion battery pack of 184Wh large capacity. 184Wh / 12.8Ah High Capacity When assembled, the S-8192A consists of 20pcs 18650 battery cells, and reaches 184Wh / 12.8Ah high capacity.S-8192A can run approx 6 hours for normal 30W ENG cameras, and has no problem to fly with. AntonBauer Gold Mount Connection S-8192A is compatible with AntonBauer Gold mount type power system and we adopt the high quality connection bolts that ensure the reliable mounting.  Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8192Abattery, for DC14.4V (Nominate) connection, such as on-cameralights, monitors, wireless transmitter, etc.The Max Power from D-tap is 100W, 8A. 4-level LED Power Indicator On the side of the battery, there’re 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. Adopted high quality Lithium cells Over more than 15 years, SWIT has been leading brand of broadcast camera batteries. The first reason is the high quality Lithium cells we adopted. The high quality cells featured long life, durable, safety, and most of all, the cells has very little difference to each other, which ensures the high performance of the whole battery pack. Moreover, the cells we’re using, have a smooth discharging curve by voltage, so that you can judge the remaining running time accordingly. Also when in storage, the self-discharging rates are very little, that extends the battery life effectively. Strong and Durable Housing Adopt the thicker and wider nickel slice to solder the cells, minimize the voltage drop, dissipate heating, and enhance the assembly intensity. The cells are arranged as triangular structure in the battery pack, stable and anti-shock. The cell holder inside can protect the cells pack, and separate the circuit board from the cells, to keep the boards away from internal pressure and ensure a stable working. Multiple Safety Protection Design The battery has an MCU to measure and record the real time data, and will cut off power when over-voltage, under-voltage, over-current, high-temperature of low-temperature is detected. Meanwhile, the battery housing adopts high-impact ABS material, with waist design and non-slip tread for secure handling. Cell balance adjustment After the batteries are used for a period of time, the cells voltage might get difference, and our specially designed circuit can optimizethe imbalanced cells, to prolong the battery life.    

Swit S-8I50 JVC HM600 DV Camcorder Battery Pack

Swit S-8I50 (S8I50, S 8I50, S/8I50, s8I50) JVC HM600 DV Camcorder Battery Pack Swit's S-8I50 battery is the most powerful battery currently available at 47wh and in addition features a 7.2v Pole DC output socket, 4-Level LED Power indicator and 5V/1A USB-A type power output for mobile phones. The S-8I50 is compatible with the IDX LC-2J Charger and will display remaining battery capacity in the camcorders viewfinder.

Swit S-3602B 2-Channel Panasonic VW Charger and Adaptor

Swit S-3602B (S3602B, S 3602 B, S/3602-B, s3602b) 2-Channel Panasonic VW Charger and Adaptor S-3602B is a dual channel charger for SWIT S-8BG6, and compatible with Panasonic VW-VBG6 DV battery.

Swit S-3602V Dual Channel Sequential Charger for JVC BN-VF823

Swit S-3602V (S3602V, S 3602 V, S/3602-V, s3602v) JVC BN-VF Series Dual Channel Sequential Charger for JVC BN-VF823. The SWIT S-3602V Dual Charger/Adapter has two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8823 and JVC BN-VF823 batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.  

Swit S-3602I Dual Channel Sequential Charger

Swit S-3602I (S3602I, S 3602 I, S/3602-I, s3602i) JVC GY-HM600/650 Dual Channel Sequential Charger The SWIT S-3602I Dual Charger/Adapter has two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8i50 and JVC SSL-JVC50 batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.

Swit SC-302S 2-Channel V-mount Battery Charger

Swit SC-302S (SC302S, SC 302 S, SC/302-S, sc302s, sc 302 s) 2-Channel V-mount Battery Charger The SC-302S is a portable two channel sequential charger which can automatically recognise the type of battery being charged (Ni-Mh and Lithium-Ion).  

Swit D-8161A 190wh digital gold mount battery

D-8161A 190Wh Digital Gold Mount Bettery The Swit D-8161A is a lightweight 190Wh gold mount digital camera battery in SWIT DIBAS system. It has a 4-level LED indicator to give you a view of remaining power before mounting to camera, and a connecting shoe for wireless receiver S-7002. The D-8161A has a built-in intelligent circuit that has multiple protections of abnormal current, voltage and temperature.The D-4200 battery watch can also be connected, enabling it to read battery information such as exact remaining capacity, running time, real-time power, voltage, circuit and so on. Li-Ion 14.4v 190Wh 4 level power indicator

Swit S-3602C 2-Channel Canon BP Charger and Adaptor

Swit S-3602C (S3602C, S 3602 C, S/3602-C, s3602c) 2-Channel Canon BP Charger and Adaptor  S-3602C is a dual channel sequential charger of S-8945 and compatible with Canon BP series DV batteries. It has battery shape adaptor outputs for Canon XM1/XM2, XL1/XL2, XH-A1/G1/H1 cameras and corresponding equipments. It is also available for charging in one channel and adapting in the other channel.

Swit S-3602F 2-Channel Sony NP-F Charger and Adaptor

Swit S-3602F (S3602F, S 3602 F S/3602-F, s3602f) 2-Channel Sony NP-F Charger and Adaptor S-3602F is a dual channel charger for SWIT S-8972, S-8970, S-8770, and compatible with SONY L series NP-F970/770 DV batteries.

Swit S-3602U 2-Channel Sony BP-U Charger and Adaptor

Swit S-3602U (S3602U, S 3602 U S/3602-U, s3602u) 2-Channel Sony BP-U Charger and Adaptor S-3602U is a dual channel charger for SWIT S-8U63 and compatible with SONY BP-U series batteries. Intelligent Dual Channel Charging S-3602U has 2 charging channels, totally DC 16.7V, 1.9A output, and can charge 2 batteries sequentially to 75% capacity, and then charge both batteries simultaneously to full. The 4-level LED charging indicators are provided for each channel, which indicate the real time capacity by percentage when charging. AC-DC Adapting Output S-3602U has a 5.5mm/2.1mm pole socket of DC12V, 1.9A adapting output. The package also provides a DC cable for adapting SONY PMW-EX1/3/100/200 cameras.  Advanced Charging Curve Li-ion charging follows a two-period approach. The first period is constant-current. The battery is charged at the maximum charging rate. When the battery reaches a specified set-point voltage, charging circuits switch to the second period: the constant-voltage period. The charging circuit will provide only enough current to maintain the voltage, to prevent the battery from over charging. Multiple Safety Protection Design SWIT charger can identify different chemical types of batteries, and provide the correct charging program, to protect the batteries from over current, over charging, high temperature, etc.

Swit S-7104 d-tap to pole jack cable

Swit S-7104 (S7104, S 7104 S/7104, s7104, s 7104) D-Tap to Pole Jack Cable The S-7104 connects to D-tap socket of batteries or mount plates and provides 14.4V DC output through a pole connector, applicable for S-1080H/B/A series monitors power supply. Features: 14.4V DC output D-tap to pole(5.5mm) connector Power supply for S-1080H/B/A series monitor  

Swit S-8082A 95Wh Gold Mount Battery Pack

Swit S-8082A (S_8082A, S/8082A, S 8082A) 5Wh Gold Mount Battery Pack S-8082A is the AntonBauer gold mount rechargeable Li-ion battery pack for professional video cameras.It’s compact design, smaller in size than S-8080A.

Swit S-8082S 95Wh V-mount Battery

Swit S-8082S (S8082S, S 8082 S, S-8082-S, S/8082/S, s8082s, s-8082s) 95Wh V-mount Battery S-8082S is the V-mount rechargeable Li-ion battery pack for professional video cameras. It’s compact design, smaller in size than S-8080S.

Swit S-8428 jvc bn-v series dv battery

Swit S-8428 (S8428, S 8428, S/8428, s8428) JVC BN-V Series DV Battery, 7.2V - 22.3Wh S-8428 is a 7.2V, 21Wh Li-ion DV battery compatible with JVC BNV series battery V428U. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. Features: 7.2V 21Wh capacity JVC BNV series battery compatible

Swit S-8845 Canon BP Series DV Camcorder Battery Pack

Swit S-8845 (S_8845, S/8845, S 8845) Canon BP Series DV Camcorder Battery Pack S-8845 is the replacement battery for Canon BP series BP-945/BP-970G, compatible with Canon XF100/105 and EOS C300. With 7.2V nominal voltage, the S-8845 has 47Wh / 6.6Ah capacity, and can run approx 7 hours on XF105 when LCD monitor is on, andapprox 4.5 hours on Canon EOS C300.  A 5.5/2.1mm pole-tap DC output socket is equipped on the side of S-8845 battery, for DC 7.2V (Nominate) connection.You can connect on-camera LED light, monitor or wireless transmitter on the pole-tap socket, and get power simultaneously with camera.The Max power from the pole-tap is 30W, 4A.The Pole-tap socket can also be used as charging input, by SWIT portable charger S-3010D.  The S-8845 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.  The S-8845 can be charged on SWIT Dual channel charger S-3602C. It takes about 4 hours and 30 minutes to charge from empty to 100%.And you can also use SWIT S-3010D Portable Pole-tap Charger for S-8845. It will take 3 hours to fully charge.

Swit S-8970 Sony L Series DV Camcorder Battery Pack

Swit S-8970 (S8970, S 8970, S/8970, s8970) Sony L Series DV Camcorder Battery Pack S-8970 is the replacement battery for SONY NP-F970, compatible with SONY HVR-V1/Z1/Z7, DSR-PD190, HD1000E, etc. S-8970 can exchange digital info with the cameras, and display remaining power info on the camera viewfinder.

Swit S-8972 Sony L Series DV Camcorder Battery Pack

Swit S-8972 (S_8972, S/8972, S 8972) Sony L Series DV Camcorder Battery Pack S-8972 is the replacement battery for SONY NP-F970, compatible with SONY HVR-V1/Z1/Z7, DSR-PD190, HD1000E, etc. S-8972 can exchange digital info with the cameras, and display remaining power info on the camera viewfinder.

Swit S-8D62 Panasonic CGA Series DV Camcorder Battery Pack

Swit S-8D62 (S8D62, S 8D62, S/8D62, s8D62) Panasonic CGA Series DV Camcorder Battery Pack S-8D62 is a 7.2V, 47Wh Li-ion DV battery compatible with Panasonic CGA series D54S/D28S batteries. It has a 7.2V/5.5mm pole DC output socket which allows to power camera and other devices simultaneously.  S-8D62 also has a 4-level LED indicator to give you a view of remaining power before mounting to camera. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. The S-8D62 can be charged on SWIT Dual channel charger S-3602P. It takes about 4 hours and 30 minutes to charge from empty to 100%. And you can also use SWIT S-3010D Portable Pole-tap Charger for S-8D62. It will take 7 hours to fully charge.

Swit S-8M71 sony qm style dv battery

Swit S-8M71 (S8M71, S 8M71, S/8M71, s8M71, s 8M71) Sony QM Style DV Battery, 7.2V - 22.3Wh S-8M71 is a 7.2V, 21Wh Li-ion DV battery compatible with SONY DV battery NP-QM71/71D/91/91D. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. Features: 7.2V 21Wh capacity SONY NP-QM series battery compatible