Portabrace CAR-2AUD Lightweight Carrying Case for Pro Audio Equipment

Portabrace CAR-2AUD (CAR2AUD, CAR\2AUD, CAR 2AUD, CAR-2-AUD)  Lightweight Carrying Case for Pro Audio Equipment The Audio Cargo Case has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection. It is designed to fit a recorder, mixer, Portabrae AR or MXC bag, wireless mics, batteries, headphones and a harness. This rugged case is constructed using long-life materials including 1000-denier Cordura® nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability. Arrive at your location knowing everything you need is packed, organized and accessible. There are front and back slip pockets for cast frequency cards, documents, and cables.  The 2 side pockets are perfect for extra batteries, tape, cables, and small tools.  The interior of the case is made using a copper-colored Veltex that contrasts against camera and lenses for clear visibility of the case contents. Completely customize your interior setup using the positionable interior divider system, including 1 horizontal divider,  1 6 x 9 padded pouch, and a set of 3 6-inch Piggin' Strings.  

Portabrace BOOMPOLE-39XT Soft Carrying Case for Boom Poles - 39-inches

Portabrace BOOMPOLE-39XT (BOOMPOLE39XT, BOOMPOLE\39XT, BOOMPOLE 39XT, BOOM-POLE-39XT) Soft Carrying Case for Boom Poles - 39-inches The Boom pole Case is made of 1000-denier Cordura nylon and has a padded interior.  It has a wide mouth opening for easy access to boom poles. The case also has interior reinforcing bars to keep it rigid.There are exterior pockets for carrying cables and other audio accessories. Inside the case there's tie-down strap to keep the boom poles in place during transit. There's also a rigid-foam padded bottom and anti-skid waterproof bottom panel for added protection.  There's an HB-1040, padded, suede leather shoulder strap for carrying the case over your shoulder. The BOOMPOLE-39XT also comes with suede leather covered carrying handles and suede leather covered haul handles on the sides.

Portabrace BK-2AUDOR Rigid-frame Wheeled Backpack for Pro Audio Equipment

Portabrace BK-2AUDOR (BK2AUDOR, BK\2AUDOR, BK 2AUDOR, B-K-2AUDOR) Rigid-frame Wheeled Backpack for Pro Audio Equipment The BK-2AUDOR with wheels has a lightweight, padded rigid frame and a comfortable strap system with thick padding and breathable mesh lining to maximize air-flow.The case has a padded pocket that will hold a 17" laptop computer and 2 accessory pockets perfect for spare batteries and cables.  It includes a 6" x 9" padded accessory pouch, a set of 6" Piggin' Strings, and a strong rigid divder for extra support of heavy audio equipment.  The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. A LI-GLW illumination strip light pocket is included.

Portabrace BK-2AUD Rigid-Frame Backpack for Pro Audio Equipment

Portabrace BK-2AUD (BK2AUD, BK\2AUD, BK 2AUD, B-K-2AUD)  Rigid-Frame Backpack for Pro Audio Equipment The BK-2AUD has a lightweight, padded rigid frame and a comfortable strap system with thick padding and breathable mesh lining to maximize air-flow.The case has a padded pocket that will hold a 17" laptop computer and 2 accessory pockets perfect for spare batteries and cables.  It includes a 6" x 9" padded accessory pouch, a set of 6" Piggin' Strings, and a strong rigid divder for extra support of heavy audio equipment.  The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. A LI-GLW illumination strip light pocket is included.

Portabrace AR-ZH6 Custom-fit Protective Case for Zoom H6N Recorder

Portabrace AR-ZH6 (ARZH6, AR\ZH6, AR ZH6, A-R-ZH6) Custom-fit Protective Case for Zoom H6N Recorder The AR-ZH6 case is custom made for the Zoom H6N recorder. The protective case fits the recorder perfectly and provides easy access to both the controls and also to the devices audio inputs. The vinyl windows allow the user to monitor the audio levels, while the Velcro window also allows simple access to the gain control. The case also provides a small attachment point for a strap or belt loop.

Portabrace AR-ZH5 Custom-Fit Protective Case for Zoom H5N Recorder

Portabrace AR-ZH5 (ARZH5, AR\ZH5, AR ZH5, A-R-ZH5) Custom-Fit Protective Case for Zoom H5N Recorder The AR-ZH5 is a custom-fit protective carrying case for the Zoom H5N recorder.The case is constructed of durable, abrasion-resistant 1000-denier Cordura material and features clear vinyl windows over display screens and controls. Velcro-sealed openings provide full access to controls and audio inputs/outputs without sacrificing protection.There are attachement points to use with optional (not-included) audio straps or harnesses.  

Portabrace AR-ZH4 Custom-Fit Protective Case for Zoom H4N Recorder

Portabrace AR-ZH4 (ARZH4, AR\ZH4, AR ZH4, A-R-ZH4) Custom-Fit Protective Case for Zoom H4N Recorder The AR-ZH4 from Porta Brace is a durable carrying case for the Zoom H4/H4n, designed to protect your valuable recorder for use in the field. Constructed of 1000 denier Cordura nylon, this case is made to shield your H4/H4n from rain and dust. It features clear vinyl windows that allow full view of all displays and touch fastener closures provide easy access to all controls and ports.  

Portabrace AR-Z8XC Carrying Case for Zoom F8 with Extra Wireless Pouch

Portabrace AR-Z8XC (ARZ8XC , AR\Z8XC , AR Z8XC , A-R-Z8XC) Carrying Case for Zoom F8 with Extra Wireless Pouch The AR-Z8XC Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect a Zoom® F8 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura® nylon. The case body has two lightweight rigid frame panels for maximum protection, which are lined with a layer of foam padding to help absorb shocks. Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with Velcro® to provide maximum protection against water, dust and debris. The AR-Z8XC comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Zoom F8 from rain or splashing. The AR-Z8XC comes with an additional battery holder on the bottom of the case and a pouch for carrying additional wireless receivers that attaches to the front of the case. There is also an adjustable suede shoulder strap for extra comfort. The strap can be removed if you prefer to use the case with a harness (we recommend the AH-2H Portabrace Harness)

Portabrace AR-SF1 Protective Carrying Case for Portable Hand-Held Recorders

Portabrace AR-SF1 (ARSF1, AR SF1, AR/SF1, SF1) Protective Carrying Case for Portable Hand-Held Recorders. The AR-SF1 is a protective carrying case that fits a wide range of small portable audio recorders. The case has a clear vinyl display window that allows you to see and operate the recorder controls easily, without removing the recorder from the case. Velcro-lined openings provide access to cables and controls. In addition to the case,  a comfortable HB-15 shoulder strap is also included so the recorder can be worn conveniently around the neck or over the shoulder.

Portabrace AR-MIXPRE6 Custom-Fit Cordura Carrying Case for Mix-Pre 6 Recorder

Portabrace AR-MIXPRE6 (ARMIXPRE6, AR MIXPRE6, AR/MIXPRE6, MIXPRE6) Custom-Fit Cordura Carrying Case for Mix-Pre 6 Recorder. The AR-MIXPRE6 Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect the Sound Devices Mix-Pre 6 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura® nylon. The case body is lined with a layer of foam padding to help absorb shocks and protect form bumps and scratches. Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with hook and loop fastener to provide maximum protection against water, dust and debris. The AR-MIXPRE6 also comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Mix-Pre 6 from rain or splashing. There is a wireless transmitter pocket on each side of the case and molle strips along the front of the case to allow for more transmitters to be clipped (4 total).

Portabrace AR-MIXPRE10T Custom-Fit Carrying Case for Sound Devices

Portabrace AR-MIXPRE10T (ARMIXPRE10T, AR MIXPRE10T, AR/MIXPRE10T, MIXPRE10T) Custom-Fit Carrying Case for Sound Devices. The AR-MIXPRE10T Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect the Sound Devices Mix-Pre10T field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura® nylon. The case body is lined with a layer of foam padding to help absorb shocks and protect form bumps and scratches. Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with hook and loop fastener to provide maximum protection against water, dust and debris. The AR-MIXPRE10T also comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Mix-Pre10T from rain or splashing. There is a wireless transmitter pocket on each side of the case and molle strips along the front of the case to allow for more transmitters tobe clipped (4 total).

Portabrace AR-H4NPRO Custom-Fit Protective Case for Zoom H4NPRO Recorder

Portabrace AR-H4NPRO (ARH4NPRO, AR H4NPRO, AR/H4NPRO, H4NPRO) Custom-Fit Protective Case for Zoom H4NPRO Recorder. The AR-H4PRO audio recorder case is custom-fit to the Zoom H4NPRO recorder and is designed to protect and improve the field performance of the Zoom H4N Pro recorder. This professional audio case is constructed using durable, abrasion-resistant 1000-denier Cordura material. There are clear vinyl display windows for unobstructed viewing of the recorder's controls. The vinyl also allows for the recorder's controls to be used while still providing protection from rain and dust. All of the openings for cable inputs and outputs have Velcro closures, which seal tightly around cables to prevent dirt and debris from entering the case. A lightweight shoulder strap is included for carrying over your shoulder when the recorder is not in use. A lid folds closed over the mic section to protect the delicate mics during transport and while not in use.

Portabrace AR-F4XC Carrying Case for Zoom F4 with Extra Wireless Pouch

Portabrace AR-F4XC (ARF4XC, AR F4XC, AR/F4XC, F4XC) Carrying Case for Zoom F4 with Extra Wireless Pouch. The AR-F4XC Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect a Zoom® F4 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura® nylon. The case body has two lightweight rigid frame panels for maximum protection, which are lined with a layer of foam padding to help absorb shocks. Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with Velcro® to provide maximum protection against water, dust and debris. The AR-F4XC comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Zoom F4 from rain or splashing. The AR-F4XC comes with an additional battery holder on the bottom of the case and a pouch for carrying additional wireless receivers that attaches to the front of the case. There is also an adjustable suede shoulder strap for extra comfort. The strap can be removed if you prefer to use the case with a harness (we recommend the AH-2H Portabrace Harness).

Portabrace AR-DR680B Custom-Fit Protective Case for Tascam DR-680MKII Recorder

Portabrace AR-DR680B (ARDR680B, AR DR680B, AR/DR680B, DR680B) Custom-Fit Protective Case for Tascam DR-680MKII Recorder. The AR-DR680B Audio Recorder Case is custom-designed to fit the Tascam DR-680 and DR-680MKII recorders. Made using durable 1000-denier Cordura with a padded foam interior and an HB-15 comfortable shoulder strap, the AR-DR680B protects your recorder while providing access to all important switches, knobs, cables, and batteries. The case features a modular design, which gives you the flexibility to carry different combinations of equipment, depending on the job. It can be ganged with an optional PortaBrace mixer case (MXC models) and the optional RM-Multi wireless microphone case. Custom-Fit Case for the Tascam DR-680MKII recorder Case allows access the DR-680's controls, cables, and batteries Can be ganged with an optional PortaBrace mixer case (MXC-models) and modular RM-Multi mic case 1000-denier Cordura exterior and foam-padded interior An HB-15 Shoulder Carrying Strap is included

Portabrace AR-DR100MKIII Custom-Fit Protective Case for Tascam DR100-MKlIl Recorder

Portabrace AR-DR100MKIII (ARDR100MKIII, AR/DR100MKIII, AR DR100MKIII, DR100MKIII) Custom-Fit Protective Case for Tascam DR100-MKlIl Recorder. The AR-DR100MKllI case is custom made for the Tascam DR100-MKllI audio recorder. The protective case fits the recorder perfectly and provides easy access to both the controls and also to the devices audio inputs. The vinyl windows allow the user to monitor the audio levels and controls. The case also provides small attachment points for a shoulder strap or belt.

Portabrace AR-DR100MKII Custom-Fit Protective Case for Tascam DR100-MKll Recorder

Portabrace AR-DR100MKII (ARDR100MKII, AR DR100MKII, AR/DR100MKII, DR100MKII) Custom-Fit Protective Case for Tascam DR100-MKll Recorder. The AR-DR100MKll case is custom made for the Tascam DR100-MKll audio recorder. The protective case fits the recorder perfectly and provides easy access to both the controls and also to the devices audio inputs. The vinyl windows allow the user to monitor the audio levels and controls. The case also provides small attachment points for a shoulder strap or belt.

Portabrace AR-7B Custom-fit Protective Case for Sound Devices 700-Series Recorders

Portabrace AR-7B (AR7B, AR\7B, AR 7B, A-R-7B) Custom-fit Protective Case for Sound Devices 700-Series Recorders The AUDIO RECORDER CASE (AR-7B) is a modular case, which can be ganged with another AR-7, or a Porta Brace mixer case (MXC- models). They can also be connected to any of the modular Radio Mike cases (RM- series) The modular design gives you the flexibility to change the combination of equipment that each job demands. The cases are padded and custom fitted, providing access to switches, cables, batteries, and other important controls while protecting the gear from rain, snow, dust and other damaging forces. A shoulder strap and the detachable RM-MULTI case are included. (be sure to use the adhesive backed Velcro inside the case for proper fitting).

Portabrace AO-MIXPRE6S Lightweight and Silent Audio Organizer for Mix-Pre 6

Portabrace AO-MIXPRE6S (AOMIXPRE6S, AO\MIXPRE6S, AO MIXPRE6S, A-O-MIXPRE6S) Lightweight and Silent Audio Organizer for Mix-Pre 6 The PortaBrace AO-MIXPRE6S Audio Organizer SILENT Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units

Portabrace AO-MIXPRE10TS Audio Organizer Bag Silent Version Sound Devices MixPre 10T

Portabrace AO-MIXPRE10TS (AOMIXPRE10TS, AO\MIXPRE10TS, AO MIXPRE10TS, A-O-MIXPRE10TS) Audio Organizer Bag Silent Version Sound Devices MixPre 10T The PortaBrace AO-MIXPRE10TS Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-688S Audio Organizer Bag Silent Version Sound Devices 688

Portabrace AO-688S (AO688S, AO\688S, AO 688S, A-O-688S) Audio Organizer Bag Silent Version Sound Devices 688 The PortaBraceAO-688S Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-688H Rigid-Frame, Audio Organizer Case with Audio Harness

Portabrace AO-688H (AO688H, AO\688H, AO 688H, A-O-688H) Rigid-Frame, Audio Organizer Case with Audio Harness The Audio Organizer (AO) is a 1000-denier Cordura® nylon case with a rigid plastic frame and interior padding in the main section and pocket.  It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment.  The AO-688H comes with a durable audio harness. Zip-off side panels provide access for cables.  The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back.  it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility. The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not® material on the bottom of the case.  An audio harness is included in this case to help distribute the weight in a comfortable way.

Portabrace AO-688 Rigid-Frame Audio Organizer Case for Sound Devices 688

Portabrace AO-688 (AO688, AO\688, AO 688, A-O-688) Rigid-Frame Audio Organizer Case for Sound Devices 688 The Audio Organizer (AO) is a 1000-denier Cordura® nylon case with a rigid plastic frame and interior padding in the main section and pocket.  It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment. Zip-off side panels provide access for cables.  The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back.  it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility. The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not® material on the bottom of the case.  A comfortable suede leather shoulder strap is included for carryng the case over the shoulder or around the neck.  The case can also be used with an optional Portabrace Audio Harness.

Portabrace AO-633S Lightweight and Silent Audio Organizer Case with Suede Strap

Portabrace AO-633S (AO633S, AO\633S, AO 633S, A-O-633S) Lightweight and Silent Audio Organizer Case with Suede Strap The PortaBrace AO-633S Audio Organizer SILENT Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-302S Audio Organizer Bag Silent Version Sound Devices 302

Portabrace AO-302S (AO-302S, AO-302S, AO-302S, AO-302S, AO-302S) Audio Organizer Bag Silent Version Sound Devices 302 The PortaBrace AO-302S Audio Organizer SILENT Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-1Silent Lightweight and Silent Audio Organizer Case

Portabrace AO-1Silent (AO1Silent, AO\1Silent, AO 1Silent, A-O-1Silent) Lightweight and Silent Audio Organizer Case The PortaBrace AO-1SILENT Audio Organizer SILENT Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-1.5XB Rigid-Frame, Protective Case for Recorder, Mixer & Wireless Mics (M)

Portabrace AO-1.5XB (AO1.5XB, AO\1.5XB, AO 1.5XB, A-O-1.5XB) Rigid-Frame, Protective Case for Recorder, Mixer & Wireless Mics (M). The AO-1.5XB Audio Organizer is a large, self contained case made for audio field mixers and recorders. The larger dimensions of the bag offer plenty of storage options and also ample room for multiple receivers. The main structure of this bag is made from rigid corrugated plastic paneling covered in durable padded Cordura® fabric.  This combination of materials creates a strong and rigid frame that offers maximum protection and lightweight performance. Accessories can be stored in the collapsible front pocket of the case. Both sides of the AO series bag are fully detachable side panels that allow easy access to all mixer inputs and outputs. Located on both exterior sides of the bag are transmitter pouches with NP1/BDS pockets. Also, there is a large zip bottle holder that expands to alternatively hold headphones. This bag is the perfect solution for large multiple receiver situations. All-New Redesigned Features Include: Large access flap on back for battery access Attached external NP1 pocket NP1/BDS/transmitter pockets on both sides Boom rest/headphone pouch/bottle-holder pocket NP1 Velcro locks on each side Metal harness attachment rings each side Smaller compact collapsible front pocket Accessory storage in front pocket Interior copper colored lining Longer carry handles Longer vinyl cover Double layer vinyl pocket Boom-pole attachment point 2 x rigid dividers

Portabrace AO-1.5SILENTSQP Lightweight and Silent Audio Organizer Case

Portabrace AO-1.5SILENTSQP (AO1.5SILENTSQP, AO\1.5SILENTSQP, AO 1.5SILENTSQP, A-O-1.5SILENTSQP) Lightweight and Silent Audio Organizer Case The PortaBrace AO-1.5SILENT Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless unit  

Portabrace AO-1.5SILENTSQ Lightweight and Silent Audio Organizer Case

Portabrace AO-1.5SILENTSQ (AO1.5SILENTSQ, AO\1.5SILENTSQ, AO 1.5SILENTSQ, A-O-1.5SILENTSQ) Lightweight and Silent Audio Organizer Case The PortaBrace AO-1.5SILENT Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-1.5SILENTSHQP Lightweight and Silent Audio Organizer

Portabrace AO-1.5SILENTSHQP (AO1.5SILENTSHQP, AO 1.5SILENTSHQP, AO\1.5SILENTSHQP, A-O-1.5SILENTSHQP) Lightweight and Silent Audio Organizer The PortaBrace AO-1.5SILENT Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units

Portabrace AO-1.5SILENTS Lightweight and Silent Audio Organizer Case - Strap & Lid

Portabrace AO-1.5SILENTS (AO1.5SILENTS, AO\1.5SILENTS, AO 1.5SILENTS, A-O-1.5SILENTS) Lightweight and Silent Audio Organizer Case - Strap & Lid The PortaBrace AO-1.5SILENT Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-1.5SILENTH Lightweight and Silent Audio Organizer Case

Portabrace AO-1.5SILENTH (AO1.5SILENTH, AO\1.5SILENTH, AO 1.5SILENTH, A-O-1.5SILENTH) Lightweight and Silent Audio Organizer Case  The PortaBrace AO-1.5SILENT Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.

Portabrace AO-1.5SILENT Audio Organizer SILENT Pro Audio Bag for Field Recorders (Black)

Portabrace AO-1.5SILENT (AO\1.5SILENT, AO 1.5SILENT, AO1.5SILENT, A-O-1.5SILENT) Audio Organizer SILENT Pro Audio Bag for Field Recorders (Black) The PortaBrace AO-1.5SILENT Audio Organizer “SILENT” Pro Audio Bag for Field Recorders (Black) is designed for use with audio field mixers and quiet connectors. Lightweight yet rugged construction—the kind professionals have come to expect from us up here in Vermont—are also key features of the Audio Organizer. The bag keeps things quiet while recording thanks to its nearly noiseless magnetic connectors. It also features rubber-tipped zippers, which prevent the sound of metal on metal. Other thoughtful touches include fully detachable side panels for easy access to mixer inputs and outputs, and MOLLE strips for conveniently holding receivers, cables, headphones, and the like. You will also find hop pouches on either side, along with a zippable flask holder. Additionally, the Piggin’ String lends a hand with longer coils of cable and extension cords. A light but strong aluminum frame ensures a sturdy case that won’t weigh you down. In fact, this Audio Organizer, at 2.7lb, weighs almost half that of competitor’s cases. The exterior is made from durable waterproofed 1000-Denier Cordura, protecting it from the elements, and the roughest environments. The interior keeps your gear safe with its soft and protective material. Two padded dividers provide extra security. One pad also has a removable elastic wireless holder that can accommodate up to 3 wireless units.    

Portabrace BK-1HDV Backpack for Small Compact HD Camcorder (Black)

Portabrace BK-1HDV (BK_1HDV, BK/1HDV, BK 1HDV) Backpack for Small Compact HD Camcorder (Black)  The BK-1HDV Backpack is designed to hold a small compact HD camera and accessories. The case is made using abrasion-resistant 1000-denier Cordura nylon material. The frame is made using a lightweight, 1-inch thick foam for extra protection for the camera and other contents. The interior is lined with soft Veltex material that prevents scratching of equipment and also allows the interior padded dividers to be placed in any position throughout the interior. The Veltex acts as a connector for the Velcro tips of the padded dividers. The BK-1HDV strap system allows you to use the comfortable backpack straps. The straps have thick padding and are lined with soft mesh material to maximize air-flow between the backpack and your body. The backpack straps tuck away when not in use.  There is a side pouch that carries small tripods and exterior pockets to hold additional accessories. There is also an interior pouch for a tablet computer (iPad compatible) with a clear vinyl cover so the tablet can be used while in the case. Thick padding and soft interior lining Tripod carrying pouch and cinch system Tablet pouch that allows the tablet to be used while stored Comfortable straps and suede leather handle for carrying

Portabrace ATV-Z8 Audio Tactical Vest for Zoom F8 Portable Recorder

Portabrace ATV-Z8 (ATV_Z8, ATV/Z8, ATV Z8) Audio Tactical Vest for Zoom F8 Portable Recorder The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest. Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field. The Portabrace ATV-Z8 is compatible with the Zoom F8. The use of these powerful mixers combined with dual wireless systems creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer. The long list of features includes: a modular iPad pouch, an innovative new boom clip, a removable pouch that can attach to either the front or back, a separate modular phone/pen holder, which is interchangeable with the iPad sleeve. In addition, there is an NP1 pocket situated under the mixer and a double vinyl rain cover that opens up and acts as a pouch.

Portabrace ATV-F4 Audio Tactical Vest for Zoom F4

Portabrace ATV-F4 (ATVF4, ATV F4, ATV/F4) Audio Tactical Vest for Zoom F4 The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest. Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field. The Portabrace ATV-F4 is compatible with the Zoom F4. The use of these powerful mixers combined with dual wireless systems creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer. The long list of features includes: a modular iPad pouch, an innovative new boom clip, a removable pouch that can attach to either the front or back, a separate modular phone/pen holder, which is interchangeable with the iPad sleeve. In addition, there is an NP1 pocket situated under the mixer and a double vinyl rain cover that opens up and acts as a pouch.

Portabrace ATV-788 Audio Tactical Vest for Sound Devices 788

Portabrace ATV-788 (ATV788, ATV/788 , ATV 788) Audio Tactical Vest for Sound Devices 788 Portable Recorder The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest. Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field. The Portabrace ATV-788 is also compatible with the Sound Devices 788. The use of this powerful mixer combined with a dual wireless system creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer. The long list of features includes: a modular iPad pouch, an innovative new boom clip, a removable pouch that can attach to either the front or back, a separate modular phone/pen holder, which is interchangeable with the iPad sleeve. In addition, there is an NP1 pocket situated under the mixer and a double vinyl rain cover that opens up and acts as a pouch.

Portabrace ATV-688 Audio Tactical Vest Sound Devices 688 (Black)

Portabrace ATV-688 (ATV_688, ATV/688, ATV 688) Audio Tactical Vest Sound Devices 688 (Black)  The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest.   Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field.   The Portabrace ATV-688 is also compatible with the Sound Devices 688. The use of this powerful mixer combined with a dual wireless system creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer.   The long list of features includes: a modular iPad pouch, an innovative new boom clip, a removable pouch that can attach to either the front or back, a separate modular phone/pen holder, which is interchangeable with the iPad sleeve. In addition, there is an NP1 pocket situated under the mixer and a double vinyl rain cover that opens up and acts as a pouch.

Portabrace AR-DR701D Audio Recorder Case Tascam DR-701D Black

Portabrace AR-DR701D  (AR/DR701D, ARDR701D, AR DR701D, DR701D) Audio Recorder Case Tascam DR-701D Black. The AR-DR701D Recorder Case is designed to custom fit the Tascam DR701D or the Tascam DR70D recorder for use with wireless mics. Featuring flaps, clear vinyl windows, and protective coverings, this mixer case provides access to cable openings, batteries, dials, and switches. The mixer case is also padded to protect your mixer and accessories. The AR-DR701D includes the main mixer compartment and a comfortable shoulder strap.

Portabrace AO-4WT/664H Audio Organizer with AH-2H Harness (Black)

Portabrace AO-4WT/664H (AO4WT/664H, AO 4WT/664H, AO/4WT/664H) (AH/2H) Audio Organizer with AH-2H Harness (Black) The Audio Organizer (AO) is a 1000-denier Cordura® nylon case with a rigid plastic frame and interior padding in the main section and pocket.  It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment.   Zip-off side panels provide access for cables. The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back.  it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility.   The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not® material on the bottom of the case.    The AO-4WT/664H comes with an audio harness to make carrying your audio organizer, easier and more comfortable. The AO-4WT/664H is wider and taller than the standard AO-4, designed specifically to fit the Sound Devices 664 with or without the CL6.

Portabrace AO-4WT/664 Audio Organizer Case for Sound Devices 664 (Black)

Portabrace AO-4WT/664 (AO/4WT/664, AO_4WT/664, AO 4WT/664) Audio Organizer Case for Sound Devices 664 (Black)  The Audio Organizer (AO) is a 1000-denier Cordura® nylon case with a rigid plastic frame and interior padding in the main section and pocket.  It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment. Zip-off side panels provide access for cables.  The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back.  it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility. The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not® material on the bottom of the case.  A comfortable suede leather shoulder strap is included for carryng the case over the shoulder or around the neck.  The case can also be used with an optional Portabrace Audio Harness. The AO-4WT/664 is wider and taller than the standard AO-4, designed specifically to fit the Sound Devices 664 with or without the CL6.

Portabrace AO-2X Audio Organizer Case (Blue)

Portabrace AO-2X (AO2X, AO/2X, AO 2X) Audio Organizer Case (Blue) The PortaBrace AO series organizer  is a  large, self contained case made for audio field mixers and recorders. The larger dimensions of the bag offer plenty of storage options and also ample room for multiple receivers. The main structure of this Portabrace bag is made from hard plastic paneling covered in durable padded Cordura fabric, this combination of materials create a strong and ridged frame that offers great protection to the users  equipment. Any extra equipment can be stored in the large front pocket of the case. Both sides of the AO series bag are fully detachable side panels that allow easy access to all mixer inputs and outputs. Located on both exterior sides of the bag are transmitter hop pouches and also one large zip able flask holder. This bag is the perfect solution for large multiple receiver situations.  

Portabrace AO-1XBH Audio Organizer with AH-2H Harness Kit (Black)

Portabrace AO-1XBH (AO1XBH, AO/1XBH, AO 1XBH) Audio Organizer with AH-2H Harness Kit (Black) The PortaBrace AO series organizer  is a  large, self contained case made for audio field mixers and recorders. The larger dimensions of the bag offer plenty of storage options and also ample room for multiple receivers. The main structure of this Portabrace bag is made from hard plastic paneling covered in durable padded Cordura fabric, this combination of materials create a strong and ridged frame that offers great protection to the users  equipment. Any extra equipment can be stored in the large front pocket of the case. Both sides of the AO series bag are fully detachable side panels that allow easy access to all mixer inputs and outputs. Located on both exterior sides of the bag are transmitter hop pouches and also one large zip able flask holder. This bag is the perfect solution for large multiple receiver situations.  

Portabrace AO-1.5XBH Audio Organizer Case with Audio harness (M)

Portabrace AO-1.5XBH (AO1.5XBH, AO 1.5XBH, AO/1.5XBH) Audio Organizer Case with Audio harness (M)  The PortaBrace AO series organizer with Audio Harness is a large, self contained case made for audio field mixers and recorders. The larger dimensions of the bag offer plenty of storage options and also ample room for multiple receivers. The main structure of this Portabrace bag is made from hard plastic paneling covered in durable padded Cordura fabric, this combination of materials create a strong and ridged frame that offers great protection to the users equipment. Any extra equipment can be stored in the large front pocket of the case. Both sides of the AO series bag are fully detachable side panels that allow easy access to all mixer inputs and outputs. Located on both exterior sides of the bag are transmitter hop pouches and also one large zip able flask holder. This bag is the perfect solution for large multiple receiver situations.  All-New Redesigned Features Include: Large access flap on back for battery access Attached external NP1 pocket NP1/BDS/transmitter pockets on both sides Boom rest/headphone pouch/bottle-holder pocket NP1 Velcro locks on each side Metal harness attachment rings each side Smaller compact collapsible front pocket Accessory storage in front pocket Interior copper colored lining Longer carry handles Longer vinyl cover Double layer vinyl pocket Boom-pole attachment point 2 x rigid dividers    

Portabrace AH-2.5 Padded Audio Harness

Portabrace AH-2.5 (AH 2.5, AH/2.5, AH2.5) Padded Audio Harness The AH-2.5 is a lightweight design with moderate padding along the shoulders, chest, spine, and lumbar for ultra comfort when carrying heavy loads. There are strong and durable attachment points along the front side of the harness. The AH-2.5 is also adjustable to create a comfortable and secure fit. The material used to line the strapping and lumbar is a breathable mesh fabric that helps to eliminate over heating.

Portabrace AR-DR60D Audio Recorder Case for Tascam DR-60D Recorder

Portabrace AR-DR60D (AR_DR60D, AR/DR60D, AR DR60D) (DR/60D) Audio Recorder Case for Tascam DR-60D Recorder The AR-DR60D case is custom made for the Tascam DR-60D audio recorder. The protective case fits the recorder perfectly and provides easy access to both the controls and also to the devices audio inputs. The vinyl windows allow the user to monitor the audio levels and controls. The case also provides small attachment points for a shoulder strap.